Mailman 3 November 2020 - Buildbot-status

Buildbot failure in Python on s390x RHEL8 LTO 3.x
by buildbot＠python.org Nov. 4, 2020

Nov. 4, 2020

The Buildbot has detected a failed build on builder s390x RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/567/builds/936 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 409 tests OK. 10 slowest tests: - test_concurrent_futures: 2 min 53 sec - test_peg_generator: 2 min 52 sec - test_gdb: 1 min 42 sec - test_multiprocessing_spawn: 1 min 11 sec - test_multiprocessing_forkserver: 1 min - test_multiprocessing_fork: 54.2 sec - test_signal: 47.4 sec - test_asyncio: 46.2 sec - test_tokenize: 37.3 sec - test_io: 35.9 sec 1 test altered the execution environment: test_asyncio 14 tests skipped: test_devpoll test_ioctl test_kqueue test_msilib test_nis test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 5 min 8 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 321, in __del__ self.close() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 316, in close self._ssl_protocol._start_shutdown() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 590, in _start_shutdown self._abort() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 731, in _abort self._transport.abort() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/selector_events.py", line 680, in abort self._force_close(None) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/selector_events.py", line 731, in _force_close self._loop.call_soon(self._call_connection_lost, exc) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/base_events.py", line 746, in call_soon self._check_closed() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/base_events.py", line 510, in _check_closed raise RuntimeError('Event loop is closed') RuntimeError: Event loop is closed Test report =========== Sincerely, -The Buildbot

1 0

Buildbot worker pablogsal-arch-x86_64 missing
by buildbot＠python.org Nov. 4, 2020

Nov. 4, 2020

The Buildbot working for 'Python' has noticed that the worker named pablogsal-arch-x86_64 went away. It last disconnected at Wed Nov 4 02:00:16 2020. The admin on record (as reported by WORKER:info/admin) was None. Sincerely, -The Buildbot

1 0

Buildbot failure in Python on s390x RHEL8 Refleaks 3.9
by buildbot＠python.org Nov. 3, 2020

Nov. 3, 2020

The Buildbot has detected a new failure on builder s390x RHEL8 Refleaks 3.9 while building Python. Full details are available at: https://buildbot.python.org/all/#builders/326/builds/115 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/dje/cpython-buildarea/3.9.edelsohn-rhel8-z.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Failed tests: - test_os - test_asyncio Sincerely, -The Buildbot

1 0

Buildbot failure in Python on aarch64 RHEL7 3.x
by buildbot＠python.org Nov. 3, 2020

Nov. 3, 2020

The Buildbot has detected a failed build on builder aarch64 RHEL7 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/539/builds/282 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-aarch64 Build Reason: <unknown> Blamelist: Erlend Egeberg Aasland <erlend.aasland(a)innova.no> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 409 tests OK. 10 slowest tests: - test_unparse: 4 min 16 sec - test_concurrent_futures: 4 min 14 sec - test_tokenize: 3 min 33 sec - test_capi: 3 min 23 sec - test_peg_generator: 3 min 7 sec - test_multiprocessing_spawn: 2 min 55 sec - test_asyncio: 2 min 20 sec - test_lib2to3: 2 min 15 sec - test_unicodedata: 1 min 43 sec - test_multiprocessing_forkserver: 1 min 37 sec 1 test altered the execution environment: test_asyncio 14 tests skipped: test_devpoll test_gdb test_ioctl test_kqueue test_msilib test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 7 min 16 sec Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/sslproto.py", line 321, in __del__ self.close() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/sslproto.py", line 316, in close self._ssl_protocol._start_shutdown() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/sslproto.py", line 590, in _start_shutdown self._abort() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/sslproto.py", line 731, in _abort self._transport.abort() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/selector_events.py", line 680, in abort self._force_close(None) File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/selector_events.py", line 731, in _force_close self._loop.call_soon(self._call_connection_lost, exc) File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/base_events.py", line 746, in call_soon self._check_closed() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64/build/Lib/asyncio/base_events.py", line 510, in _check_closed raise RuntimeError('Event loop is closed') RuntimeError: Event loop is closed Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on aarch64 RHEL8 Refleaks 3.9
by buildbot＠python.org Nov. 3, 2020

Nov. 3, 2020

The Buildbot has detected a new failure on builder aarch64 RHEL8 Refleaks 3.9 while building Python. Full details are available at: https://buildbot.python.org/all/#builders/247/builds/80 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 411 tests OK. 10 slowest tests: - test_asyncio: 56 min 39 sec - test_signal: 31 min 5 sec - test_pydoc: 29 min 55 sec - test_concurrent_futures: 22 min 20 sec - test_peg_generator: 18 min 45 sec - test_multiprocessing_spawn: 14 min 2 sec - test_gdb: 13 min 50 sec - test_multiprocessing_forkserver: 8 min 52 sec - test_lib2to3: 8 min 44 sec - test_nntplib: 8 min 5 sec 1 test altered the execution environment: test_asyncio 13 tests skipped: test_devpoll test_ioctl test_kqueue test_msilib test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 58 min 28 sec Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/sslproto.py", line 321, in __del__ self.close() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/sslproto.py", line 316, in close self._ssl_protocol._start_shutdown() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/sslproto.py", line 590, in _start_shutdown self._abort() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/sslproto.py", line 731, in _abort self._transport.abort() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/selector_events.py", line 680, in abort self._force_close(None) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/selector_events.py", line 731, in _force_close self._loop.call_soon(self._call_connection_lost, exc) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/base_events.py", line 746, in call_soon self._check_closed() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/base_events.py", line 510, in _check_closed raise RuntimeError('Event loop is closed') RuntimeError: Event loop is closed /home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/selector_events.py:704: ResourceWarning: unclosed transport <_SelectorSocketTransport closing fd=9> _warn(f"unclosed transport {self!r}", ResourceWarning, source=self) ResourceWarning: Enable tracemalloc to get the object allocation traceback Task was destroyed but it is pending! task: <Task pending name='Task-12784' coro=<BaseSelectorEventLoop._accept_connection2() running at /home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/asyncio/selector_events.py:218> wait_for=<Future pending cb=[<TaskWakeupMethWrapper object at 0xffff85de8410>()]>> ... Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.9.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on s390x RHEL8 LTO 3.x
by buildbot＠python.org Nov. 2, 2020

Nov. 2, 2020

The Buildbot has detected a failed build on builder s390x RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/567/builds/926 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Victor Stinner <vstinner(a)python.org> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 409 tests OK. 10 slowest tests: - test_concurrent_futures: 3 min 3 sec - test_peg_generator: 2 min 58 sec - test_gdb: 1 min 46 sec - test_multiprocessing_spawn: 1 min 12 sec - test_nntplib: 1 min 6 sec - test_multiprocessing_forkserver: 1 min 1 sec - test_signal: 55.7 sec - test_multiprocessing_fork: 54.4 sec - test_asyncio: 47.1 sec - test_io: 35.2 sec 1 test altered the execution environment: test_asyncio 14 tests skipped: test_devpoll test_ioctl test_kqueue test_msilib test_nis test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 4 min 49 sec Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 321, in __del__ self.close() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 316, in close self._ssl_protocol._start_shutdown() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 590, in _start_shutdown self._abort() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/sslproto.py", line 731, in _abort self._transport.abort() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/selector_events.py", line 680, in abort self._force_close(None) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/selector_events.py", line 731, in _force_close self._loop.call_soon(self._call_connection_lost, exc) File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/base_events.py", line 746, in call_soon self._check_closed() File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/asyncio/base_events.py", line 510, in _check_closed raise RuntimeError('Event loop is closed') RuntimeError: Event loop is closed Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on aarch64 Fedora Rawhide 3.x
by buildbot＠python.org Nov. 2, 2020

Nov. 2, 2020

The Buildbot has detected a new failure on builder aarch64 Fedora Rawhide 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/339/builds/245 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-aarch64 Build Reason: <unknown> Blamelist: Akashkumar D Khunt <akashdkhunt(a)gmail.com>, Alexey Izbyshev <izbyshev(a)ispras.ru>, Andre Delfino <adelfino(a)gmail.com>, Andrew Kuchling <amk(a)amk.ca>, Andrey Doroschenko <dorosch.github.io(a)yandex.ru>, Antoine <43954001+awecx(a)users.noreply.github.com>, Batuhan Taskaya <batuhanosmantaskaya(a)gmail.com>, Brett Cannon <brett(a)python.org>, Cheryl Sabella <cheryl.sabella(a)gmail.com>, Christian Heimes <christian(a)python.org>, Christopher Marchfelder <marchfelder(a)googlemail.com>, Dong-hee Na <donghee.na92(a)gmail.com>, Dong-hee Na <donghee.na(a)python.org>, Eric Snow <ericsnowcurrently(a)gmail.com>, Eric W <robo-eric(a)gmx.de>, Erlend Egeberg Aasland <erlend.aasland(a)innova.no>, Florian Dahlitz <f2dahlitz(a)freenet.de>, Georges Toth <georges(a)trypill.org>, Gregory P. Smith <greg(a)krypto.org>, Géry Ogam <gery.ogam(a)gmail.com>, Hai Shi <shihai1992(a)gmail.com>, Inada Naoki <songofacandy(a)gmail.com>, Irit Katriel <iritkatriel(a)yahoo.com>, Jacob Neil Taylor <me(a)jacobtaylor.id.au>, Jakub Jelen <jakuje(a)gmail.com>, Jakub Stasiak <jakub(a)stasiak.at>, Jason R. Coombs <jaraco(a)jaraco.com>, John Losito <lositojohnj(a)gmail.com>, Joongi Kim <joongi(a)lablup.com>, Julien Danjou <julien(a)danjou.info>, Justin Turner Arthur <justinarthur(a)gmail.com>, Lisa Roach <lisaroach14(a)gmail.com>, Lysandros Nikolaou <lisandrosnik(a)gmail.com>, MARUYAMA Norihiro <norihiro.maruyama(a)gmail.com>, Marco Sulla <github(a)marco.sulla.e4ward.com>, Mariatta <Mariatta(a)users.noreply.github.com>, Mark Roseman <mark(a)markroseman.com>, Mark Shannon <mark(a)hotpy.org>, Matti Picus <matti.picus(a)gmail.com>, Miro Hrončok <miro(a)hroncok.cz>, Neil Schemenauer <nas-github(a)arctrix.com>, Pablo Galindo <Pablogsal(a)gmail.com>, Paul Ganssle <paul(a)ganssle.io>, Paul Moore <p.f.moore(a)gmail.com>, Petr Viktorin <encukou(a)gmail.com>, Philippe Ombredanne <pombredanne(a)gmail.com>, Rafael Fontenelle <rffontenelle(a)users.noreply.github.com>, Raymond Hettinger <rhettinger(a)users.noreply.github.com>, Raúl Cumplido <raulcumplido(a)gmail.com>, Ronald Oussoren <ronaldoussoren(a)mac.com>, Ruben Vorderman <r.h.p.vorderman(a)lumc.n l>, Saiyang Gou <gousaiyang(a)163.com>, Serhiy Storchaka <storchaka(a)gmail.com>, Steve Dower <steve.dower(a)python.org>, TIGirardi <tiagoigirardi(a)gmail.com>, Tal Einat <taleinat+github(a)gmail.com>, Terry Jan Reedy <tjreedy(a)udel.edu>, Teugea Ioan-Teodor <teodor.teugea(a)gmail.com>, Tomer Cohen <tomer(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Vladimir Matveev <vladima(a)fb.com>, Yonatan Goldschmidt <yon.goldschmidt(a)gmail.com>, Zackery Spytz <zspytz(a)gmail.com>, dependabot[bot] <49699333+dependabot[bot](a)users.noreply.github.com>, kj <28750310+Fidget-Spinner(a)users.noreply.github.com>, kpinc <kop(a)karlpinc.com>, larryhastings <larry(a)hastings.org>, Максим <maksvenberv(a)yandex.ru> BUILD FAILED: compile (failure) clean (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 74, done. remote: Counting objects: 1% (1/74) remote: Counting objects: 2% (2/74) remote: Counting objects: 4% (3/74) remote: Counting objects: 5% (4/74) remote: Counting objects: 6% (5/74) remote: Counting objects: 8% (6/74) remote: Counting objects: 9% (7/74) remote: Counting objects: 10% (8/74) remote: Counting objects: 12% (9/74) remote: Counting objects: 13% (10/74) remote: Counting objects: 14% (11/74) remote: Counting objects: 16% (12/74) remote: Counting objects: 17% (13/74) remote: Counting objects: 18% (14/74) remote: Counting objects: 20% (15/74) remote: Counting objects: 21% (16/74) remote: Counting objects: 22% (17/74) remote: Counting objects: 24% (18/74) remote: Counting objects: 25% (19/74) remote: Counting objects: 27% (20/74) remote: Counting objects: 28% (21/74) remote: Counting objects: 29% (22/74) remote: Counting objects: 31% (23/74) remote: Counting objects: 32% (24/74) remote: Counting objects: 33% (25/74) remote: Counting objects: 35% (26/74) remote: Counting objects: 36% (27/74) remote: Counting objects: 37% (28/74) remote: Counting objects: 39% (29/74) remote: Counting objects: 40% (30/74) remote: Counting objects: 41% (31/74) remote: Counting objects: 43% (32/74) remote: Counting objects: 44% (33/74) remote: Counting objects: 45% (34/74) remote: Counting objects: 47% (35/74) remote: Counting objects: 48% (36/74) remote: Counting objects: 50% (37/74) remote: Counting objects: 51% (38/74) remote: Counting objects: 52% (39/74) remote: Counting objects: 54% (40/74) remote: Counting objects: 55% (41/74) remote: Counting objects: 56% (42/74) remote: Counting objects: 58% (43/74) remote: Counting objects: 59% (44/74) remote: Counting objects: 60% (45/74) remote: Counting objects: 62% (46/74) remote: Counting objects: 63% (47/74) remote: Counting objects: 64% (48/74) remote: Counting objects: 66% (49/74) remote: Counting objects: 67% (50/74) remote: Counting objects: 68% (51/74) remote: Counting objects: 70% (52/74) remote: Counting objects: 71% (53/74) remote: Counting objects: 72% (54/74) remote: Counting objects: 74% (55/74) remote: Counting objects: 75% (56/74) remote: Counting objects: 77% (57/74) remote: Counting objects: 78% (58/74) remote: Counting objects: 79% (59/74) remote: Counting objects: 81% (60/74) remote: Counting objects: 82% (61/74) remote: Counting objects: 83% (62/74) remote: Counting objects: 85% (63/74) remote: Counting objects: 86% (64/74) remote: Counting objects: 87% (65/74) remote: Counting objects: 89% (66/74) remote: Counting objects: 90% (67/74) remote: Counting objects: 91% (68/74) remote: Counting objects: 93% (69/74) remote: Counting objects: 94% (70/74) remote: Counting objects: 95% (71/74) remote: Counting objects: 97% (72/74) remote: Counting objects: 98% (73/74) remote: Counting objects: 100% (74/74) remote: Counting objects: 100% (74/74), done. remote: Compressing objects: 3% (1/32) remote: Compressing objects: 6% (2/32) remote: Compressing objects: 9% (3/32) remote: Compressing objects: 12% (4/32) remote: Compressing objects: 15% (5/32) remote: Compressing objects: 18% (6/32) remote: Compressing objects: 21% (7/32) remote: Compressing objects: 25% (8/32) remote: Compressing objects: 28% (9/32) remote: Compressing objects: 31% (10/32) remote: Compressing objects: 34% (11/32) remote: Compressing objects: 37% (12/32) remote: Compressing objects: 40% (13/32) remote: Compressing objects: 43% (14/32) remote: Compressing objects: 46% (15/32) remote: Compressing objects: 50% (16/32) remote: Compressing objects: 53% (17/32) remote: Compressing objects: 56% (18/32) remote: Compressing objects: 59% (19/32) remote: Compressing objects: 62% (20/32) remote: Compressing objects: 65% (21/32) remote: Compressing objects: 68% (22/32) remote: Compressing objects: 71% (23/32) remote: Compressing objects: 75% (24/32) remote: Compressing objects: 78% (25/32) remote: Compressing objects: 81% (26/32) remote: Compressing objects: 84% (27/32) remote: Compressing objects: 87% (28/32) remote: Compressing objects: 90% (29/32) remote: Compressing objects: 93% (30/32) remote: Compressing objects: 96% (31/32) remote: Compressing objects: 100% (32/32) remote: Compressing objects: 100% (32/32), done. remote: Total 76 (delta 51), reused 49 (delta 42), pack-reused 2 From https://github.com/python/cpython * branch master -> FETCH_HEAD Reset branch 'master' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/./setup.py", line 2622, in <module> main() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/./setup.py", line 2592, in main setup(# PyPI Metadata (PEP 301) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/core.py", line 148, in setup dist.run_commands() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/dist.py", line 966, in run_commands self.run_command(cmd) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/dist.py", line 985, in run_command cmd_obj.run() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/command/build.py", line 135, in run self.run_command(cmd_name) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/cmd.py", line 313, in run_command self.distribution.run_command(command) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/dist.py", line 985, in run_command cmd_obj.run() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/command/build_ext.py", line 340, in run self.build_extensions() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/./setup.py", line 471, in build_extensions build_ext.build_extensions(self) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/command/build_ext.py", line 447, in build_extensions self._build_extensions_parallel() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/command/build_ext.py", line 469, in _build_extensions_parallel fut.result() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/concurrent/futures/_base.py", line 433, in result return self.__get_result() File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/concurrent/futures/_base.py", line 389, in __get_result raise self._exception File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/concurrent/futures/thread.py", line 52, in run result = self.fn(*self.args, **self.kwargs) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/./setup.py", line 566, in build_extension build_ext.build_extension(self, ext) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/command/build_ext.py", line 529, in build_extension objects = self.compiler.compile(sources, File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/ccompiler.py", line 574, in compile self._compile(obj, src, ext, cc_args, extra_postargs, pp_opts) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/unixccompiler.py", line 117, in _compile self.spawn(compiler_so + cc_args + [src, '-o', obj] + File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/ccompiler.py", line 910, in spawn spawn(cmd, dry_run=self.dry_run) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/distutils/spawn.py", line 75, in spawn proc = subprocess.Popen(cmd, env=env) File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/subprocess.py", line 958, in __init__ self._execute_child(args, executable, preexec_fn, close_fds, File "/home/buildbot/buildarea/3.x.cstratak-fedora-rawhide-aarch64/build/Lib/subprocess.py", line 1769, in _execute_child self.pid = _posixsubprocess.fork_exec( RuntimeError: subprocess not supported for isolated subinterpreters make: *** [Makefile:628: sharedmods] Error 1 find: ‘./build/test_python_698657æ/test_python_worker_700375æ/@test_700375_tmpæ/dirE’: Permission denied make: [Makefile:1799: pycremoval] Error 1 (ignored) find: ‘./build/test_python_698657æ/test_python_worker_700375æ/@test_700375_tmpæ/dirE’: Permission denied make: [Makefile:1800: pycremoval] Error 1 (ignored) find: ‘./build/test_python_698657æ/test_python_worker_700375æ/@test_700375_tmpæ/dirE’: Permission denied make: *** [Makefile:1816: clean-retain-profile] Error 1 Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on aarch64 RHEL8 Refleaks 3.8
by buildbot＠python.org Nov. 2, 2020

Nov. 2, 2020

The Buildbot has detected a new failure on builder aarch64 RHEL8 Refleaks 3.8 while building Python. Full details are available at: https://buildbot.python.org/all/#builders/225/builds/77 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory ./home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 6 leaked semaphore objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory Traceback (most recent call last): File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 300, in _run_finalizers finalizer() File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/util.py", line 224, in __call__ res = self._callback(*self._args, **self._kwargs) File "/home/buildbot/buildarea/3.8.cstratak-RHEL8-aarch64.refleak/build/Lib/multiprocessing/synchronize.py", line 87, in _cleanup sem_unlink(name) FileNotFoundError: [Errno 2] No such file or directory . Test report =========== Failed tests: - test_asyncio Sincerely, -The Buildbot

1 0

Buildbot failure in Python on POWER6 AIX 3.8
by buildbot＠python.org Nov. 2, 2020

Nov. 2, 2020

The Buildbot has detected a failed build on builder POWER6 AIX 3.8 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/138/builds/92 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: aixtools-aix-power6 Build Reason: <unknown> Blamelist: Miss Skeleton (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 404 tests OK. 10 slowest tests: - test_subprocess: 2 min 59 sec - test_multiprocessing_spawn: 2 min 51 sec - test_concurrent_futures: 2 min 50 sec - test_multiprocessing_forkserver: 2 min 22 sec - test_tokenize: 2 min - test_lib2to3: 1 min 59 sec - test_tools: 1 min 52 sec - test_multiprocessing_fork: 1 min 41 sec - test_ssl: 1 min 23 sec - test_venv: 1 min 14 sec 1 test altered the execution environment: test_threading 18 tests skipped: test_devpoll test_epoll test_gdb test_ioctl test_kqueue test_msilib test_ossaudiodev test_spwd test_startfile test_tix test_tk test_ttk_guionly test_unicode_file test_unicode_file_functions test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 24 min 15 sec Captured traceback ================== remote: Enumerating objects: 5, done. remote: Counting objects: 20% (1/5) remote: Counting objects: 40% (2/5) remote: Counting objects: 60% (3/5) remote: Counting objects: 80% (4/5) remote: Counting objects: 100% (5/5) remote: Counting objects: 100% (5/5), done. remote: Total 5 (delta 4), reused 4 (delta 4), pack-reused 0 From https://github.com/python/cpython * branch 3.8 -> FETCH_HEAD Reset branch '3.8' 1500-030: (I) INFORMATION: _PyExc_Init: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "Objects/moduleobject.c", line 287.20: 1506-068 (W) Operation between types "struct _object*(*)(struct _object*,struct PyModuleDef*)" and "void*" is not allowed. 1500-030: (I) INFORMATION: test_c_api: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "Objects/structseq.c", line 465.45: 1506-196 (W) Initialization between types "void*" and "void(*)(struct _object*)" is not allowed. "Objects/structseq.c", line 466.42: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*)" is not allowed. "Objects/structseq.c", line 469.41: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _typeobject*,struct _object*,struct _object*)" is not allowed. "Objects/structseq.c", line 471.46: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*,int(*)(struct _object*,void*),void*)" is not allowed. 1500-030: (I) INFORMATION: type_new: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: rsplit: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: init_types: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: _PyEval_EvalFrameDefault: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: convertsimple: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: config_as_dict: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: r_object: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "Python/pystate.c", line 51.26: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,void*)" is not allowed. "Python/pystate.c", line 57.29: 1506-068 (W) Operation between types "struct _object*(*)(struct _object*,void*)" and "void*" is not allowed. 1500-030: (I) INFORMATION: symtable_visit_stmt: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "./Modules/posixmodule.c", line 6287.11: 1506-131 (W) Explicit dimension specification or initializer required for an auto or static array. 1500-030: (I) INFORMATION: sre_ucs1_count: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "./Modules/atexitmodule.c", line 334.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. 1500-030: (I) INFORMATION: PyInit__io: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "./Modules/xxsubtype.c", line 293.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. ldd: /lib/libreadline.a: File is an archive. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/arraymodule.c", line 3073.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. 1500-030: (I) INFORMATION: save_reduce: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: task_step_impl: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6039.18: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6041.21: 1506-196 (W) Initialization between types "void*" and "void(*)(struct {...}*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6067.18: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6069.21: 1506-196 (W) Initialization between types "void*" and "void(*)(struct {...}*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6109.18: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6132.24: 1506-196 (W) Initialization between types "int(*)(struct _object*,struct _object*,struct _object*)" and "void*" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6185.18: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6187.22: 1506-196 (W) Initialization between types "void*" and "void(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6258.18: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6260.22: 1506-196 (W) Initialization between types "void*" and "int(*)(struct {...}*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testcapimodule.c", line 6261.21: 1506-196 (W) Initialization between types "void*" and "void(*)(struct {...}*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 89.22: 1506-196 (W) Initialization between types "void*" and "void(*)(struct {...}*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 90.22: 1506-196 (W) Initialization between types "void*" and "int(*)(struct {...}*,int(*)(struct _object*,void*),void*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 91.22: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct {...}*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 92.21: 1506-196 (W) Initialization between types "void*" and "int(*)(struct {...}*,const char*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 243.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 290.21: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct PyModuleDef*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 493.21: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct PyModuleDef*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 514.21: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct PyModuleDef*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 535.21: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct PyModuleDef*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 549.21: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct PyModuleDef*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 550.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 570.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 591.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 612.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_testmultiphase.c", line 658.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. 1500-030: (I) INFORMATION: PyInit__curses: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: PyInit__socket: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ssl.c", line 594.17: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct {...}*)" is not allowed. 1500-030: (I) INFORMATION: PyInit__ssl: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: sha_transform: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: sha512_transform: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 70.14: 1506-508 (W) Option push for pragma pack is not supported. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 70.1: 1506-224 (W) Incorrect pragma ignored. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 140.14: 1506-726 (W) Attempting to pop an empty pack stack. Current pack may change. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 70.14: 1506-508 (W) Option push for pragma pack is not supported. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 70.1: 1506-224 (W) Incorrect pragma ignored. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 140.14: 1506-726 (W) Attempting to pop an empty pack stack. Current pack may change. 1500-030: (I) INFORMATION: PyBlake2_blake2b_compress: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 70.14: 1506-508 (W) Option push for pragma pack is not supported. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 70.1: 1506-224 (W) Incorrect pragma ignored. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_blake2/impl/blake2.h", line 140.14: 1506-726 (W) Attempting to pop an empty pack stack. Current pack may change. 1500-030: (I) INFORMATION: PyBlake2_blake2s_compress: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/binascii.c", line 1648.19: 1506-196 (W) Initialization between types "void*" and "int(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/pyexpat.c", line 1228.23: 1506-068 (W) Operation between types "void*" and "void(*)(void*,const char*,int)" is not allowed. 1500-030: (I) INFORMATION: PyInit_pyexpat: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. 1500-030: (I) INFORMATION: PyInit__decimal: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_decimal/libmpdec/mpdecimal.c", line 249.5: 1506-780 (S) Reference to "_mpd_idiv_word" with internal linkage is not allowed within inline definition of "mpd_digits_to_size". "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 942.21: 1506-196 (W) Initialization between types "void*" and "void(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 943.18: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 944.17: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 945.22: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 946.25: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*,struct _object*,int)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 3233.21: 1506-196 (W) Initialization between types "void*" and "void(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 3234.18: 1506-196 (W) Initialization between types "void*" and "struct _object*(*)(struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_tkinter.c", line 3288.21: 1506-196 (W) Initialization between types "void*" and "void(*)(struct _object*)" is not allowed. ld: 0711-224 WARNING: Duplicate symbol: .strcmp ld: 0711-224 WARNING: Duplicate symbol: strcmp ld: 0711-224 WARNING: Duplicate symbol: .strcpy ld: 0711-224 WARNING: Duplicate symbol: strcpy ld: 0711-224 WARNING: Duplicate symbol: .strcat ld: 0711-224 WARNING: Duplicate symbol: strcat ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 3649.27: 1506-068 (W) Operation between types "void*" and "int(*)(void)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 4201.31: 1506-280 (W) Function argument assignment between types "int(*)(void)" and "void*" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 5838.63: 1506-280 (W) Function argument assignment between types "void*" and "void*(*)(void*,const void*,unsigned long)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 5839.62: 1506-280 (W) Function argument assignment between types "void*" and "void*(*)(void*,int,unsigned long)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 5840.65: 1506-280 (W) Function argument assignment between types "void*" and "struct _object*(*)(const char*,int)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 5841.60: 1506-280 (W) Function argument assignment between types "void*" and "struct _object*(*)(void*,struct _object*,struct _object*)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/_ctypes.c", line 5843.66: 1506-280 (W) Function argument assignment between types "void*" and "struct _object*(*)(const unsigned short*,int)" is not allowed. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_ctypes/callproc.c", line 871.32: 1506-280 (W) Function argument assignment between types "void(*)(void)" and "void*" is not allowed. ldd: /lib/libreadline.a: File is an archive. 1500-030: (I) INFORMATION: PyInit__decimal: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_decimal/libmpdec/mpdecimal.c", line 249.5: 1506-780 (S) Reference to "_mpd_idiv_word" with internal linkage is not allowed within inline definition of "mpd_digits_to_size". ldd: /lib/libreadline.a: File is an archive. 1500-030: (I) INFORMATION: PyInit__decimal: Additional optimization may be attained by recompiling and specifying MAXMEM option with a value greater than 8192. "/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Modules/_decimal/libmpdec/mpdecimal.c", line 249.5: 1506-780 (S) Reference to "_mpd_idiv_word" with internal linkage is not allowed within inline definition of "mpd_digits_to_size". test_startfile skipped -- object <module 'os' from '/home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/os.py'> has no attribute 'startfile' test_unicode_file_functions skipped -- only NT+ and systems with Unicode-friendly filesystem encoding /home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 1 leaked shared_memory objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' /home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/multiprocessing/resource_tracker.py:229: UserWarning: resource_tracker: '/psm_4b9cb5ce': [Errno 2] No such file or directory: '/psm_4b9cb5ce' warnings.warn('resource_tracker: %r: %s' % (name, e)) /home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 1 leaked shared_memory objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' /home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/multiprocessing/resource_tracker.py:229: UserWarning: resource_tracker: '/psm_0c66c79e': [Errno 2] No such file or directory: '/psm_0c66c79e' warnings.warn('resource_tracker: %r: %s' % (name, e)) setgroups: Not owner test_flock (__main__.FNTLEINTRTest) ... ok test_lockf (__main__.FNTLEINTRTest) ... skipped 'AIX returns PermissionError' test_read (__main__.OSEINTRTest) ... ok test_wait (__main__.OSEINTRTest) ... ok test_wait3 (__main__.OSEINTRTest) ... ok test_wait4 (__main__.OSEINTRTest) ... ok test_waitpid (__main__.OSEINTRTest) ... ok test_write (__main__.OSEINTRTest) ... ok test_devpoll (__main__.SelectEINTRTest) ... skipped 'need select.devpoll' test_epoll (__main__.SelectEINTRTest) ... skipped 'need select.epoll' test_kqueue (__main__.SelectEINTRTest) ... skipped 'need select.kqueue' test_poll (__main__.SelectEINTRTest) ... ok test_select (__main__.SelectEINTRTest) ... ok test_sigtimedwait (__main__.SignalEINTRTest) ... ok test_sigwaitinfo (__main__.SignalEINTRTest) ... ok test_accept (__main__.SocketEINTRTest) ... ok test_open (__main__.SocketEINTRTest) ... ok test_os_open (__main__.SocketEINTRTest) ... ok test_recv (__main__.SocketEINTRTest) ... ok test_recvmsg (__main__.SocketEINTRTest) ... ok test_send (__main__.SocketEINTRTest) ... ok test_sendall (__main__.SocketEINTRTest) ... ok test_sendmsg (__main__.SocketEINTRTest) ... ok test_sleep (__main__.TimeEINTRTest) ... ok ---------------------------------------------------------------------- Ran 24 tests in 7.827s OK (skipped=4) test_ioctl skipped -- Unable to open /dev/tty stty: tcgetattr: A specified file does not support the ioctl system call. test_msilib skipped -- No module named '_msi' Warning -- files was modified by test_threading test_abort (test.test_threading.BarrierTests) Test that an abort will put the barrier in a broken state ... ok test_abort_and_reset (test.test_threading.BarrierTests) Test that a barrier can be reset after being broken. ... ok test_action (test.test_threading.BarrierTests) Test the 'action' callback ... ok test_barrier (test.test_threading.BarrierTests) Test that a barrier is passed in lockstep ... ok test_barrier_10 (test.test_threading.BarrierTests) Test that a barrier works for 10 consecutive runs ... ok test_default_timeout (test.test_threading.BarrierTests) Test the barrier's default timeout ... ok test_reset (test.test_threading.BarrierTests) Test that a 'reset' on a barrier frees the waiting threads ... ok test_single_thread (test.test_threading.BarrierTests) ... ok test_timeout (test.test_threading.BarrierTests) Test wait(timeout) ... ok test_wait_return (test.test_threading.BarrierTests) test the return value from barrier.wait ... ok test_acquire (test.test_threading.BoundedSemaphoreTests) ... ok test_acquire_contended (test.test_threading.BoundedSemaphoreTests) ... ok test_acquire_destroy (test.test_threading.BoundedSemaphoreTests) ... ok test_acquire_timeout (test.test_threading.BoundedSemaphoreTests) ... ok test_constructor (test.test_threading.BoundedSemaphoreTests) ... ok test_default_value (test.test_threading.BoundedSemaphoreTests) ... ok test_release_unacquired (test.test_threading.BoundedSemaphoreTests) ... ok test_try_acquire (test.test_threading.BoundedSemaphoreTests) ... ok test_try_acquire_contended (test.test_threading.BoundedSemaphoreTests) ... ok test_with (test.test_threading.BoundedSemaphoreTests) ... ok test__is_owned (test.test_threading.CRLockTests) ... ok test_acquire_contended (test.test_threading.CRLockTests) ... ok test_acquire_destroy (test.test_threading.CRLockTests) ... ok test_acquire_release (test.test_threading.CRLockTests) ... ok test_constructor (test.test_threading.CRLockTests) ... ok test_different_thread (test.test_threading.CRLockTests) ... ok test_locked_repr (test.test_threading.CRLockTests) ... ok test_reacquire (test.test_threading.CRLockTests) ... ok test_release_save_unacquired (test.test_threading.CRLockTests) ... ok test_release_unacquired (test.test_threading.CRLockTests) ... ok test_repr (test.test_threading.CRLockTests) ... ok test_thread_leak (test.test_threading.CRLockTests) ... ok test_timeout (test.test_threading.CRLockTests) ... ok test_try_acquire (test.test_threading.CRLockTests) ... ok test_try_acquire_contended (test.test_threading.CRLockTests) ... ok test_weakref_deleted (test.test_threading.CRLockTests) ... ok test_weakref_exists (test.test_threading.CRLockTests) ... ok test_with (test.test_threading.CRLockTests) ... ok test__is_owned (test.test_threading.ConditionAsRLockTests) ... ok test_acquire_contended (test.test_threading.ConditionAsRLockTests) ... ok test_acquire_destroy (test.test_threading.ConditionAsRLockTests) ... ok test_acquire_release (test.test_threading.ConditionAsRLockTests) ... ok test_constructor (test.test_threading.ConditionAsRLockTests) ... ok test_different_thread (test.test_threading.ConditionAsRLockTests) ... ok test_locked_repr (test.test_threading.ConditionAsRLockTests) ... ok test_reacquire (test.test_threading.ConditionAsRLockTests) ... ok test_release_save_unacquired (test.test_threading.ConditionAsRLockTests) ... ok test_release_unacquired (test.test_threading.ConditionAsRLockTests) ... ok test_repr (test.test_threading.ConditionAsRLockTests) ... ok test_thread_leak (test.test_threading.ConditionAsRLockTests) ... ok test_timeout (test.test_threading.ConditionAsRLockTests) ... ok test_try_acquire (test.test_threading.ConditionAsRLockTests) ... ok test_try_acquire_contended (test.test_threading.ConditionAsRLockTests) ... ok test_weakref_deleted (test.test_threading.ConditionAsRLockTests) ... ok test_weakref_exists (test.test_threading.ConditionAsRLockTests) ... ok test_with (test.test_threading.ConditionAsRLockTests) ... ok test_acquire (test.test_threading.ConditionTests) ... ok test_notify (test.test_threading.ConditionTests) ... ok test_timeout (test.test_threading.ConditionTests) ... ok test_unacquired_notify (test.test_threading.ConditionTests) ... ok test_unacquired_wait (test.test_threading.ConditionTests) ... ok test_waitfor (test.test_threading.ConditionTests) ... ok test_waitfor_timeout (test.test_threading.ConditionTests) ... ok test_is_set (test.test_threading.EventTests) ... ok test_notify (test.test_threading.EventTests) ... ok test_reset_internal_locks (test.test_threading.EventTests) ... ok test_set_and_clear (test.test_threading.EventTests) ... ok test_timeout (test.test_threading.EventTests) ... ok test_custom_excepthook (test.test_threading.ExceptHookTests) ... ok test_custom_excepthook_fail (test.test_threading.ExceptHookTests) ... ok test_excepthook (test.test_threading.ExceptHookTests) ... ok test_excepthook_thread_None (test.test_threading.ExceptHookTests) ... ok test_system_exit (test.test_threading.ExceptHookTests) ... ok test_interrupt_main_mainthread (test.test_threading.InterruptMainTests) ... ok test_interrupt_main_noerror (test.test_threading.InterruptMainTests) ... ok test_interrupt_main_subthread (test.test_threading.InterruptMainTests) ... ok test_acquire_contended (test.test_threading.LockTests) ... ok test_acquire_destroy (test.test_threading.LockTests) ... ok test_acquire_release (test.test_threading.LockTests) ... ok test_constructor (test.test_threading.LockTests) ... ok test_different_thread (test.test_threading.LockTests) ... ok test_locked_repr (test.test_threading.LockTests) ... ok test_reacquire (test.test_threading.LockTests) ... ok test_repr (test.test_threading.LockTests) ... ok test_state_after_timeout (test.test_threading.LockTests) ... ok test_thread_leak (test.test_threading.LockTests) ... ok test_timeout (test.test_threading.LockTests) ... ok test_try_acquire (test.test_threading.LockTests) ... ok test_try_acquire_contended (test.test_threading.LockTests) ... ok test_weakref_deleted (test.test_threading.LockTests) ... ok test_weakref_exists (test.test_threading.LockTests) ... ok test_with (test.test_threading.LockTests) ... ok test__all__ (test.test_threading.MiscTestCase) ... ok test__is_owned (test.test_threading.PyRLockTests) ... ok test_acquire_contended (test.test_threading.PyRLockTests) ... ok test_acquire_destroy (test.test_threading.PyRLockTests) ... ok test_acquire_release (test.test_threading.PyRLockTests) ... ok test_constructor (test.test_threading.PyRLockTests) ... ok test_different_thread (test.test_threading.PyRLockTests) ... ok test_locked_repr (test.test_threading.PyRLockTests) ... ok test_reacquire (test.test_threading.PyRLockTests) ... ok test_release_save_unacquired (test.test_threading.PyRLockTests) ... ok test_release_unacquired (test.test_threading.PyRLockTests) ... ok test_repr (test.test_threading.PyRLockTests) ... ok test_thread_leak (test.test_threading.PyRLockTests) ... ok test_timeout (test.test_threading.PyRLockTests) ... ok test_try_acquire (test.test_threading.PyRLockTests) ... ok test_try_acquire_contended (test.test_threading.PyRLockTests) ... ok test_weakref_deleted (test.test_threading.PyRLockTests) ... ok test_weakref_exists (test.test_threading.PyRLockTests) ... ok test_with (test.test_threading.PyRLockTests) ... ok test_acquire (test.test_threading.SemaphoreTests) ... ok test_acquire_contended (test.test_threading.SemaphoreTests) ... ok test_acquire_destroy (test.test_threading.SemaphoreTests) ... ok test_acquire_timeout (test.test_threading.SemaphoreTests) ... ok test_constructor (test.test_threading.SemaphoreTests) ... ok test_default_value (test.test_threading.SemaphoreTests) ... ok test_release_unacquired (test.test_threading.SemaphoreTests) ... ok test_try_acquire (test.test_threading.SemaphoreTests) ... ok test_try_acquire_contended (test.test_threading.SemaphoreTests) ... ok test_with (test.test_threading.SemaphoreTests) ... ok test_daemon_threads_fatal_error (test.test_threading.SubinterpThreadingTests) ... ok test_threads_join (test.test_threading.SubinterpThreadingTests) ... ok test_threads_join_2 (test.test_threading.SubinterpThreadingTests) ... ok test_1_join_on_shutdown (test.test_threading.ThreadJoinOnShutdown) ... ok test_2_join_in_forked_process (test.test_threading.ThreadJoinOnShutdown) ... ok test_3_join_in_forked_from_thread (test.test_threading.ThreadJoinOnShutdown) ... ok test_4_daemon_threads (test.test_threading.ThreadJoinOnShutdown) ... ok test_clear_threads_states_after_fork (test.test_threading.ThreadJoinOnShutdown) ... ok test_reinit_tls_after_fork (test.test_threading.ThreadJoinOnShutdown) ... ok test_BoundedSemaphore_limit (test.test_threading.ThreadTests) ... ok test_PyThreadState_SetAsyncExc (test.test_threading.ThreadTests) ... ok test_daemon_param (test.test_threading.ThreadTests) ... ok test_dummy_thread_after_fork (test.test_threading.ThreadTests) ... ok test_enumerate_after_join (test.test_threading.ThreadTests) ... ok test_finalization_shutdown (test.test_threading.ThreadTests) ... ok test_finalize_runnning_thread (test.test_threading.ThreadTests) ... ok test_finalize_with_trace (test.test_threading.ThreadTests) ... ok test_foreign_thread (test.test_threading.ThreadTests) ... ok test_frame_tstate_tracing (test.test_threading.ThreadTests) ... ok test_ident_of_no_threading_threads (test.test_threading.ThreadTests) ... ok test_is_alive_after_fork (test.test_threading.ThreadTests) ... ok test_join_nondaemon_on_shutdown (test.test_threading.ThreadTests) ... ok test_limbo_cleanup (test.test_threading.ThreadTests) ... ok test_main_thread (test.test_threading.ThreadTests) ... ok test_main_thread_after_fork (test.test_threading.ThreadTests) ... ok test_main_thread_after_fork_from_nonmain_thread (test.test_threading.ThreadTests) ... ok test_main_thread_during_shutdown (test.test_threading.ThreadTests) ... ok test_no_refcycle_through_target (test.test_threading.ThreadTests) ... ok test_old_threading_api (test.test_threading.ThreadTests) ... ok test_repr_daemon (test.test_threading.ThreadTests) ... ok test_repr_stopped (test.test_threading.ThreadTests) ... ok test_shutdown_locks (test.test_threading.ThreadTests) ... ok test_tstate_lock (test.test_threading.ThreadTests) ... ok test_various_ops (test.test_threading.ThreadTests) ... ok test_various_ops_large_stack (test.test_threading.ThreadTests) ... ok test_various_ops_small_stack (test.test_threading.ThreadTests) ... ok test_bare_raise_in_brand_new_thread (test.test_threading.ThreadingExceptionTests) ... ok test_daemonize_active_thread (test.test_threading.ThreadingExceptionTests) ... ok test_joining_current_thread (test.test_threading.ThreadingExceptionTests) ... ok test_joining_inactive_thread (test.test_threading.ThreadingExceptionTests) ... ok test_print_exception (test.test_threading.ThreadingExceptionTests) ... ok test_print_exception_stderr_is_none_1 (test.test_threading.ThreadingExceptionTests) ... ok test_print_exception_stderr_is_none_2 (test.test_threading.ThreadingExceptionTests) ... ok test_recursion_limit (test.test_threading.ThreadingExceptionTests) ... ok test_releasing_unacquired_lock (test.test_threading.ThreadingExceptionTests) ... ok test_start_thread_again (test.test_threading.ThreadingExceptionTests) ... ok test_init_immutable_default_args (test.test_threading.TimerTests) ... ok ---------------------------------------------------------------------- Ran 168 tests in 11.863s OK Before: [] After: ['core'] test_winreg skipped -- No module named 'winreg' /home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 1 leaked shared_memory objects to clean up at shutdown warnings.warn('resource_tracker: There appear to be %d ' /home/aixtools/buildarea/3.8.aixtools-aix-power6/build/Lib/multiprocessing/resource_tracker.py:229: UserWarning: resource_tracker: '/psm_a20bb028': [Errno 2] No such file or directory: '/psm_a20bb028' warnings.warn('resource_tracker: %r: %s' % (name, e)) test_kqueue skipped -- test works only on BSD test_epoll skipped -- test works only on Linux 2.6 test_gdb skipped -- gdb not built with embedded python support test_winconsoleio skipped -- test only relevant on win32 test_unicode_file skipped -- No Unicode filesystem semantics on this platform. test_tk skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_devpoll skipped -- test works only on Solaris OS family test_spwd skipped -- No module named 'spwd' test_zipfile64 skipped -- test requires loads of disk-space bytes and a long time to run test_ttk_guionly skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] test_winsound skipped -- No module named 'winsound' test_ossaudiodev skipped -- No module named 'ossaudiodev' test_tix skipped -- Tk unavailable due to TclError: no display name and no $DISPLAY environment variab [...] make: 1254-004 The error code from the last command is 3. Stop. Test report =========== Sincerely, -The Buildbot

1 0

Buildbot failure in Python on aarch64 RHEL7 LTO + PGO 3.x
by buildbot＠python.org Nov. 2, 2020

Nov. 2, 2020

The Buildbot has detected a failed build on builder aarch64 RHEL7 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/306/builds/280 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL7-aarch64 Build Reason: <unknown> Blamelist: Julien Danjou <julien(a)danjou.info> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Tests result: ENV CHANGED == 409 tests OK. 10 slowest tests: - test_peg_generator: 6 min 10 sec - test_tokenize: 3 min 14 sec - test_concurrent_futures: 3 min 5 sec - test_unparse: 2 min 43 sec - test_multiprocessing_spawn: 2 min 23 sec - test_asyncio: 2 min 9 sec - test_lib2to3: 2 min 6 sec - test_multiprocessing_forkserver: 1 min 42 sec - test_multiprocessing_fork: 1 min 2 sec - test_io: 56.6 sec 1 test altered the execution environment: test_asyncio 14 tests skipped: test_devpoll test_gdb test_ioctl test_kqueue test_msilib test_ossaudiodev test_startfile test_tix test_tk test_ttk_guionly test_winconsoleio test_winreg test_winsound test_zipfile64 Total duration: 7 min 46 sec Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/sslproto.py", line 321, in __del__ self.close() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/sslproto.py", line 316, in close self._ssl_protocol._start_shutdown() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/sslproto.py", line 590, in _start_shutdown self._abort() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/sslproto.py", line 731, in _abort self._transport.abort() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/selector_events.py", line 680, in abort self._force_close(None) File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/selector_events.py", line 731, in _force_close self._loop.call_soon(self._call_connection_lost, exc) File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/base_events.py", line 746, in call_soon self._check_closed() File "/home/buildbot/buildarea/3.x.cstratak-RHEL7-aarch64.lto-pgo/build/Lib/asyncio/base_events.py", line 510, in _check_closed raise RuntimeError('Event loop is closed') RuntimeError: Event loop is closed Test report =========== Sincerely, -The Buildbot

1 0