Mailman 3 November 2023 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed compile (failure) (3.10)
by buildbot＠python.org Nov. 21, 2023

Nov. 21, 2023

The Buildbot has detected a new failure on builder AMD64 Fedora Rawhide Clang 3.10 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/643/builds/1225 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Seth Michael Larson <sethmichaellarson(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 6, done. remote: Counting objects: 16% (1/6) remote: Counting objects: 33% (2/6) remote: Counting objects: 50% (3/6) remote: Counting objects: 66% (4/6) remote: Counting objects: 83% (5/6) remote: Counting objects: 100% (6/6) remote: Counting objects: 100% (6/6), done. remote: Compressing objects: 16% (1/6) remote: Compressing objects: 33% (2/6) remote: Compressing objects: 50% (3/6) remote: Compressing objects: 66% (4/6) remote: Compressing objects: 83% (5/6) remote: Compressing objects: 100% (6/6) remote: Compressing objects: 100% (6/6), done. remote: Total 6 (delta 0), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch 3.10 -> FETCH_HEAD Note: switching to 'b6535ea7ecf40c51a9a13089d961c29abeaffa5e'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at b6535ea7ec [3.10] gh-112160: Add 'regen-configure' make target (#112163) Switched to and reset branch '3.10' Objects/fileobject.c:256:9: warning: variable 'newlinetypes' set but not used [-Wunused-but-set-variable] 256 | int newlinetypes = 0; | ^ 1 warning generated. Objects/dictobject.c:2281:16: warning: variable 'i' set but not used [-Wunused-but-set-variable] 2281 | Py_ssize_t i, j; | ^ 1 warning generated. fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/context.o Python/context.c 1. <eof> parser at end of file fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Includefatal error: /ierror in backend: IO failure on output stream: No space left on devicen ternal -I. -I./Include -DPy_BUILD_CORE -o Python/fPLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. rStack dump: oz0en. main.oProgram arguments: Pcylthaonng/f r-ocz e-nWmnaoi-nu.ncu s1e. d-<eof> parser at end of file result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/ast_opt.o Python/ast_opt.c 1. <eof> parser at end of file fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/errors.o Python/errors.c 1. <eof> parser at end of file #0 0x00007f83d7d3df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007f83d7d3b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007f83d7c71fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007f83d7c71f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007f83d7d37f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007f83d7c83157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007f83d7d20f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007f83d7d1fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007f83e0562aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007f83e095fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007f83df317946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007f83e1523566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007f83e1490390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007f83e15a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007f83e10ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007f83d7c71f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007f83e10ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007f83e1090b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007f83e1090da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007f83e10ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007f83d6e4514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007f83d6e4520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -make: *** [Makefile:1856: Python/ast_opt.o] Error 1 make: *** Waiting for unfinished jobs.... Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/future.o Python/future.c 1. <eof> parser at end of file #0 0x00007f59b493df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007f59b493b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007f59b4871fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007f59b4871f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007f59b4937f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007f59b4883157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007f59b4920f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007f59b491fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007f59bd162aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007f59bd55fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007f59bbf17946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007f59be123566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007f59be090390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007f59be1a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007f59bdcca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007f59b4871f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007f59bdcca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007f59bdc90b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007f59bdc90da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007f59bdcae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007f59b3a4514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007f59b3a4520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/context.o] Error 1 #0 0x00007fdbe813df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007fdbe813b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007fdbe8071fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007fdbe8071f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007fdbe8137f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007fdbe8083157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007fdbe8120f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007fdbe811fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007fdbf0962aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007fdbf0d5fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007fdbef717946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007fdbf1923566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007fdbf1890390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007fdbf19a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007fdbf14ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007fdbe8071f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007fdbf14ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007fdbf1490b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007fdbf1490da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007fdbf14ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007fdbe724514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007fdbe724520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) #0 0x00007fd5e753df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007fd5e753b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007fd5e7471fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007fd5e7471f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007fd5e7537f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007fd5e7483157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007fd5e7520f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007fd5e751fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007fd5efd62aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007fd5f015fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007fd5eeb17946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007fd5f0d23566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007fd5f0c90390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007fd5f0da3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007fd5f08ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007fd5e7471f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007fd5f08ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007fd5f0890b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007fd5f0890da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007fd5f08ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007fd5e664514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007fd5e664520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/errors.o] Error 1 make: *** [Makefile:1856: Python/frozenmain.o] Error 1 fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/getargs.o Python/getargs.c 1. <eof> parser at end of file #0 0x00007fe1c953df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007fe1c953b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007fe1c9471fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007fe1c9471f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007fe1c9537f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007fe1c9483157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007fe1c9520f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007fe1c951fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007fe1d1d62aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007fe1d215fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007fe1d0b17946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007fe1d2d23566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007fe1d2c90390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007fe1d2da3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007fe1d28ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007fe1c9471f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007fe1d28ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007fe1d2890b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007fe1d2890da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007fe1d28ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007fe1c864514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007fe1c864520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/future.o] Error 1 fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/compile.o Python/compile.c 1. <eof> parser at end of file #0 0x00007fd06ab3df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007fd06ab3b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007fd06aa71fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007fd06aa71f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007fd06ab37f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007fd06aa83157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007fd06ab20f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007fd06ab1fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007fd073362aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007fd07375fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007fd072117946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007fd074323566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007fd074290390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007fd0743a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007fd073eca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007fd06aa71f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007fd073eca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007fd073e90b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007fd073e90da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007fd073eae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007fd069c4514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007fd069c4520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/getargs.o] Error 1 #0 0x00007f6b0fd3df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007f6b0fd3b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007f6b0fc71fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007f6b0fc71f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007f6b0fd37f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007f6b0fc83157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007f6b0fd20f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007f6b0fd1fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007f6b18562aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007f6b1895fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007f6b17317946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007f6b19523566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007f6b19490390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007f6b195a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007f6b190ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007f6b0fc71f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007f6b190ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007f6b19090b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007f6b19090da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007f6b190ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007f6b0ee4514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007f6b0ee4520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/compile.o] Error 1 fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/Python-ast.o Python/Python-ast.c 1. <eof> parser at end of file #0 0x00007fb059b3df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007fb059b3b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007fb059a71fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007fb059a71f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007fb059b37f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007fb059a83157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007fb059b20f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007fb059b1fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007fb062362aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007fb06275fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007fb061117946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007fb063323566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007fb063290390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007fb0633a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007fb062eca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007fb059a71f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007fb062eca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007fb062e90b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007fb062e90da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007fb062eae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007fb058c4514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007fb058c4520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/Python-ast.o] Error 1 fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Python/ceval.o Python/ceval.c 1. <eof> parser at end of file #0 0x00007f0f5d13df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007f0f5d13b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007f0f5d071fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007f0f5d071f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007f0f5d137f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007f0f5d083157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007f0f5d120f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007f0f5d11fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007f0f65962aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007f0f65d5fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007f0f64717946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007f0f66923566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007f0f66890390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007f0f669a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007f0f664ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007f0f5d071f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007f0f664ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007f0f66490b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007f0f66490da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007f0f664ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007f0f5c24514a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007f0f5c24520b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Python/ceval.o] Error 1 fatal error: error in backend: IO failure on output stream: No space left on device PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace, preprocessed source, and associated run script. Stack dump: 0. Program arguments: clang -c -Wno-unused-result -Wsign-compare -g -O0 -Wall -std=c99 -Wextra -Wno-unused-result -Wno-unused-parameter -Wno-missing-field-initializers -Werror=implicit-function-declaration -fvisibility=hidden -I./Include/internal -I. -I./Include -DPy_BUILD_CORE -o Objects/unicodeobject.o Objects/unicodeobject.c 1. <eof> parser at end of file #0 0x00007fc553f3df6a llvm::sys::PrintStackTrace(llvm::raw_ostream&, int) (/lib64/libLLVM-17.so+0x93df6a) #1 0x00007fc553f3b924 llvm::sys::RunSignalHandlers() (/lib64/libLLVM-17.so+0x93b924) #2 0x00007fc553e71fc2 (/lib64/libLLVM-17.so+0x871fc2) #3 0x00007fc553e71f7f (/lib64/libLLVM-17.so+0x871f7f) #4 0x00007fc553f37f6d (/lib64/libLLVM-17.so+0x937f6d) #5 0x0000000000414577 (/usr/bin/clang-17+0x414577) #6 0x00007fc553e83157 llvm::report_fatal_error(llvm::Twine const&, bool) (/lib64/libLLVM-17.so+0x883157) #7 0x00007fc553f20f35 llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x920f35) #8 0x00007fc553f1fd8d llvm::raw_fd_ostream::~raw_fd_ostream() (/lib64/libLLVM-17.so+0x91fd8d) #9 0x00007fc55c762aab clang::EmitBackendOutput(clang::DiagnosticsEngine&, clang::HeaderSearchOptions const&, clang::CodeGenOptions const&, clang::TargetOptions const&, clang::LangOptions const&, llvm::StringRef, llvm::Module*, clang::BackendAction, llvm::IntrusiveRefCntPtr<llvm::vfs::FileSystem>, std::unique_ptr<llvm::raw_pwrite_stream, std::default_delete<llvm::raw_pwrite_stream>>) (/lib64/libclang-cpp.so.17+0x1b62aab) #10 0x00007fc55cb5fba8 (/lib64/libclang-cpp.so.17+0x1f5fba8) #11 0x00007fc55b517946 clang::ParseAST(clang::Sema&, bool, bool) (/lib64/libclang-cpp.so.17+0x917946) #12 0x00007fc55d723566 clang::FrontendAction::Execute() (/lib64/libclang-cpp.so.17+0x2b23566) #13 0x00007fc55d690390 clang::CompilerInstance::ExecuteAction(clang::FrontendAction&) (/lib64/libclang-cpp.so.17+0x2a90390) #14 0x00007fc55d7a3b64 clang::ExecuteCompilerInvocation(clang::CompilerInstance*) (/lib64/libclang-cpp.so.17+0x2ba3b64) #15 0x0000000000413f5b cc1_main(llvm::ArrayRef<char const*>, char const*, void*) (/usr/bin/clang-17+0x413f5b) #16 0x00000000004112b5 (/usr/bin/clang-17+0x4112b5) #17 0x00007fc55d2ca9bd (/lib64/libclang-cpp.so.17+0x26ca9bd) #18 0x00007fc553e71f54 llvm::CrashRecoveryContext::RunSafely(llvm::function_ref<void ()>) (/lib64/libLLVM-17.so+0x871f54) #19 0x00007fc55d2ca3e7 clang::driver::CC1Command::Execute(llvm::ArrayRef<std::optional<llvm::StringRef>>, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char>>*, bool*) const (/lib64/libclang-cpp.so.17+0x26ca3e7) #20 0x00007fc55d290b3e clang::driver::Compilation::ExecuteCommand(clang::driver::Command const&, clang::driver::Command const*&, bool) const (/lib64/libclang-cpp.so.17+0x2690b3e) #21 0x00007fc55d290da7 clang::driver::Compilation::ExecuteJobs(clang::driver::JobList const&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&, bool) const (/lib64/libclang-cpp.so.17+0x2690da7) #22 0x00007fc55d2ae1fa clang::driver::Driver::ExecuteCompilation(clang::driver::Compilation&, llvm::SmallVectorImpl<std::pair<int, clang::driver::Command const*>>&) (/lib64/libclang-cpp.so.17+0x26ae1fa) #23 0x0000000000410af8 clang_main(int, char**, llvm::ToolContext const&) (/usr/bin/clang-17+0x410af8) #24 0x000000000041d636 main (/usr/bin/clang-17+0x41d636) #25 0x00007fc55edc214a __libc_start_call_main (/lib64/libc.so.6+0x2814a) #26 0x00007fc55edc220b __libc_start_main(a)GLIBC_2.2.5 (/lib64/libc.so.6+0x2820b) #27 0x000000000040d9a5 _start (/usr/bin/clang-17+0x40d9a5) make: *** [Makefile:1856: Objects/unicodeobject.o] Error 1 find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make: [Makefile:1940: clean-retain-profile] Error 1 (ignored) Test report =========== Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Rawhide 3.10 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/657/builds/1222 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-rawhide-x86_64 Build Reason: <unknown> Blamelist: Seth Michael Larson <sethmichaellarson(a)gmail.com> BUILD FAILED: failed compile (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== remote: Enumerating objects: 6, done. remote: Counting objects: 16% (1/6) remote: Counting objects: 33% (2/6) remote: Counting objects: 50% (3/6) remote: Counting objects: 66% (4/6) remote: Counting objects: 83% (5/6) remote: Counting objects: 100% (6/6) remote: Counting objects: 100% (6/6), done. remote: Compressing objects: 16% (1/6) remote: Compressing objects: 33% (2/6) remote: Compressing objects: 50% (3/6) remote: Compressing objects: 66% (4/6) remote: Compressing objects: 83% (5/6) remote: Compressing objects: 100% (6/6) remote: Compressing objects: 100% (6/6), done. remote: Total 6 (delta 0), reused 0 (delta 0), pack-reused 0 From https://github.com/python/cpython * branch 3.10 -> FETCH_HEAD Note: switching to 'b6535ea7ecf40c51a9a13089d961c29abeaffa5e'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at b6535ea7ec [3.10] gh-112160: Add 'regen-configure' make target (#112163) Switched to and reset branch '3.10' /tmp/cclP93Xd.s: Assembler messages: /tmp/cclP93Xd.s: Fatal error: Objects/complexobject.o: No space left on device make: *** [Makefile:1856: Objects/complexobject.o] Error 1 make: *** Waiting for unfinished jobs.... /tmp/cckwyF3L.s: Assembler messages: /tmp/cckwyF3L.s: Fatal error: can't write 1562 bytes to section .gnu.lto_property_get___isabstractmethod__.196.5e42eefb2d070414 of Objects/descrobject.o: 'No space left on device' /tmp/ccyMb6Vt.s: Assembler messages: /tmp/ccyMb6Vt.s: Fatal error: can't write 2 bytes to section .debug_loclists of Objects/genericaliasobject.o: 'No space left on device' /tmp/ccyMb6Vt.s: Fatal error: Objects/genericaliasobject.o: No such file or directory make: *** [Makefile:1856: Objects/genericaliasobject.o] Error 1 /tmp/ccyPngD7.s: Assembler messages: /tmp/ccyPngD7.s: Fatal error: can't write 1529 bytes to section .debug_abbrev of Objects/fileobject.o: 'No space left on device' /tmp/ccyPngD7.s: Fatal error: Objects/fileobject.o: No such file or directory make: *** [Makefile:1856: Objects/fileobject.o] Error 1 /tmp/cckwyF3L.s: Fatal error: Objects/descrobject.o: No such file or directory make: *** [Makefile:1856: Objects/descrobject.o] Error 1 /tmp/ccwaAw5N.s: Assembler messages: /tmp/ccwaAw5N.s: Fatal error: can't write 777 bytes to section .gnu.lto_stringlib_isalnum.185.9156458698d545b3 of Objects/bytearrayobject.o: 'No space left on device' /tmp/ccwaAw5N.s: Fatal error: Objects/bytearrayobject.o: No such file or directory make: *** [Makefile:1856: Objects/bytearrayobject.o] Error 1 /tmp/ccInadhA.s: Assembler messages: /tmp/ccInadhA.s: Fatal error: can't write 1779 bytes to section .debug_abbrev of Objects/genobject.o: 'No space left on device' /tmp/ccInadhA.s: Fatal error: Objects/genobject.o: No such file or directory make: *** [Makefile:1856: Objects/genobject.o] Error 1 /tmp/ccSLC6Gt.s: /tmp/cccxB5Ap.s: Assembler messages: Assembler messages: /tmp/cccxB5Ap.s: /tmp/ccSLC6Gt.s: Fatal error: Fatal error: can't write 1172 bytes to section .gnu.lto_get_unicode.247.5b4c2328ac1b949f of Objects/exceptions.o: 'No space left on device'can't write 3887 bytes to section .gnu.debuglto_.debug_info of Objects/bytesobject.o: 'No space left on device' /tmp/cccxB5Ap.s: Fatal error: Objects/exceptions.o: No such file or directory /tmp/ccSLC6Gt.s: Fatal error: Objects/bytesobject.o: No such file or directory make: *** [Makefile:1856: Objects/exceptions.o] Error 1 make: *** [Makefile:1856: Objects/bytesobject.o] Error 1 /tmp/ccYSTGI1.s: Assembler messages: /tmp/ccYSTGI1.s: Fatal error: can't write 3888 bytes to section .debug_info of Objects/floatobject.o: 'No space left on device' /tmp/ccYSTGI1.s: Fatal error: Objects/floatobject.o: No such file or directory make: *** [Makefile:1856: Objects/floatobject.o] Error 1 /tmp/cc11elHV.s: Assembler messages: /tmp/cc11elHV.s: Fatal error: can't write 12 bytes to section .text of Parser/parser.o: 'No space left on device' /tmp/cc11elHV.s: Fatal error: Parser/parser.o: No such file or directory make: *** [Makefile:1856: Parser/parser.o] Error 1 find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make: [Makefile:1940: clean-retain-profile] Error 1 (ignored) Test report =========== Sincerely, -The Buildbot

1 0

Buildbot Python worker linaro-win-arm64 missing
by buildbot＠python.org Nov. 21, 2023

Nov. 21, 2023

The Buildbot worker named linaro-win-arm64 went away. It last disconnected at Tue Nov 21 00:03:02 2023. The admin on record (as reported by WORKER:info/admin) was Windows on Arm Linaro team <woa-support(a)op-lists.linaro.org> .

1 0

☠ Buildbot (Python): - failed test (failure) (f6e11eab491b63ded24607a28cf53be056bdb926)
by buildbot＠python.org Nov. 20, 2023

Nov. 20, 2023

The Buildbot has detected a new failure on builder s390x RHEL8 Refleaks 3.11 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/948/builds/550 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.refleak/build/Lib/test/test_io.py", line 4039, in test___all__ support.check__all__(self, self.io, self.name_of_module, File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.refleak/build/Lib/test/support/__init__.py", line 1474, in check__all__ test_case.assertCountEqual(module.__all__, expected) AssertionError: Element counts were not equal: First has 0, Second has 1: 'OpenWrapper' Test report =========== Failed tests: - test_io - test.test_multiprocessing_fork.test_threads Failed subtests: - test___all__ - test.test_io.CMiscIOTest.test___all__ - test___all__ - test.test_io.PyMiscIOTest.test___all__ Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (d4fd165abab9c00ef15fbcd262804163e1a5e389)
by buildbot＠python.org Nov. 20, 2023

Nov. 20, 2023

The Buildbot has detected a new failure on builder aarch64 Fedora Stable Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1153/builds/179 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 60, done. remote: Counting objects: 1% (1/52) remote: Counting objects: 3% (2/52) remote: Counting objects: 5% (3/52) remote: Counting objects: 7% (4/52) remote: Counting objects: 9% (5/52) remote: Counting objects: 11% (6/52) remote: Counting objects: 13% (7/52) remote: Counting objects: 15% (8/52) remote: Counting objects: 17% (9/52) remote: Counting objects: 19% (10/52) remote: Counting objects: 21% (11/52) remote: Counting objects: 23% (12/52) remote: Counting objects: 25% (13/52) remote: Counting objects: 26% (14/52) remote: Counting objects: 28% (15/52) remote: Counting objects: 30% (16/52) remote: Counting objects: 32% (17/52) remote: Counting objects: 34% (18/52) remote: Counting objects: 36% (19/52) remote: Counting objects: 38% (20/52) remote: Counting objects: 40% (21/52) remote: Counting objects: 42% (22/52) remote: Counting objects: 44% (23/52) remote: Counting objects: 46% (24/52) remote: Counting objects: 48% (25/52) remote: Counting objects: 50% (26/52) remote: Counting objects: 51% (27/52) remote: Counting objects: 53% (28/52) remote: Counting objects: 55% (29/52) remote: Counting objects: 57% (30/52) remote: Counting objects: 59% (31/52) remote: Counting objects: 61% (32/52) remote: Counting objects: 63% (33/52) remote: Counting objects: 65% (34/52) remote: Counting objects: 67% (35/52) remote: Counting objects: 69% (36/52) remote: Counting objects: 71% (37/52) remote: Counting objects: 73% (38/52) remote: Counting objects: 75% (39/52) remote: Counting objects: 76% (40/52) remote: Counting objects: 78% (41/52) remote: Counting objects: 80% (42/52) remote: Counting objects: 82% (43/52) remote: Counting objects: 84% (44/52) remote: Counting objects: 86% (45/52) remote: Counting objects: 88% (46/52) remote: Counting objects: 90% (47/52) remote: Counting objects: 92% (48/52) remote: Counting objects: 94% (49/52) remote: Counting objects: 96% (50/52) remote: Counting objects: 98% (51/52) remote: Counting objects: 100% (52/52) remote: Counting objects: 100% (52/52), done. remote: Compressing objects: 3% (1/28) remote: Compressing objects: 7% (2/28) remote: Compressing objects: 10% (3/28) remote: Compressing objects: 14% (4/28) remote: Compressing objects: 17% (5/28) remote: Compressing objects: 21% (6/28) remote: Compressing objects: 25% (7/28) remote: Compressing objects: 28% (8/28) remote: Compressing objects: 32% (9/28) remote: Compressing objects: 35% (10/28) remote: Compressing objects: 39% (11/28) remote: Compressing objects: 42% (12/28) remote: Compressing objects: 46% (13/28) remote: Compressing objects: 50% (14/28) remote: Compressing objects: 53% (15/28) remote: Compressing objects: 57% (16/28) remote: Compressing objects: 60% (17/28) remote: Compressing objects: 64% (18/28) remote: Compressing objects: 67% (19/28) remote: Compressing objects: 71% (20/28) remote: Compressing objects: 75% (21/28) remote: Compressing objects: 78% (22/28) remote: Compressing objects: 82% (23/28) remote: Compressing objects: 85% (24/28) remote: Compressing objects: 89% (25/28) remote: Compressing objects: 92% (26/28) remote: Compressing objects: 96% (27/28) remote: Compressing objects: 100% (28/28) remote: Compressing objects: 100% (28/28), done. remote: Total 60 (delta 31), reused 33 (delta 24), pack-reused 8 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to 'FETCH_HEAD'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at d4fd165aba [3.12] gh-73561: Omit interface scope from IPv6 when used as Host header (GH-93324) (#112272) Switched to and reset branch '3.12' Objects/longobject.c: In function ‘long_format_binary’: Objects/longobject.c:2122:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 2122 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1998:9: note: ‘kind’ was declared here 1998 | int kind; | ^~~~ Objects/longobject.c: In function ‘long_to_decimal_string_internal’: Objects/longobject.c:1945:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 1945 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1769:9: note: ‘kind’ was declared here 1769 | int kind; | ^~~~ make: *** [Makefile:2017: buildbottest] Terminated Test report =========== Failed tests: - test.test_concurrent_futures.test_deadlock - test.test_multiprocessing_fork.test_threads Sincerely, -The Buildbot

1 0

Buildbot Python worker pablogsal-arch-x86_64 missing
by buildbot＠python.org Nov. 20, 2023

Nov. 20, 2023

The Buildbot worker named pablogsal-arch-x86_64 went away. It last disconnected at Sun Nov 19 23:47:57 2023. The admin on record (as reported by WORKER:info/admin) was pablogsal .

1 0

Buildbot Python worker linaro-win-arm64 missing
by buildbot＠python.org Nov. 20, 2023

Nov. 20, 2023

The Buildbot worker named linaro-win-arm64 went away. It last disconnected at Sun Nov 19 23:47:50 2023. The admin on record (as reported by WORKER:info/admin) was Windows on Arm Linaro team <woa-support(a)op-lists.linaro.org> .

1 0

☠ Buildbot (Python): - failed test (failure) (e9a97c3bf9a516607d11904e55f9004710b1493b)
by buildbot＠python.org Nov. 19, 2023

Nov. 19, 2023

The Buildbot has detected a new failure on builder aarch64 Fedora Stable Refleaks 3.11 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1021/builds/532 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.refleak/build/Lib/test/test_io.py", line 4039, in test___all__ support.check__all__(self, self.io, self.name_of_module, File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.refleak/build/Lib/test/support/__init__.py", line 1474, in check__all__ test_case.assertCountEqual(module.__all__, expected) AssertionError: Element counts were not equal: First has 0, Second has 1: 'OpenWrapper' Test report =========== Failed tests: - test_io - test.test_multiprocessing_forkserver.test_threads Failed subtests: - test___all__ - test.test_io.CMiscIOTest.test___all__ - test___all__ - test.test_io.PyMiscIOTest.test___all__ Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): - failed test (failure) (a62dcacc6e7fabc82c50dd942a838cd69d2846bd)
by buildbot＠python.org Nov. 19, 2023

Nov. 19, 2023

The Buildbot has detected a new failure on builder PPC64LE CentOS9 Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1130/builds/179 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-ppc64le Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-ppc64le.refleak/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.12.cstratak-CentOS9-ppc64le.refleak/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test.test_concurrent_futures.test_deadlock - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Windows11 Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1103/builds/184 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: ware-win11 Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== Captured traceback ================== Traceback (most recent call last): File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\test_multiprocessing_main_handling.py", line 171, in test_basic_script with os_helper.temp_dir() as script_dir: File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\contextlib.py", line 144, in __exit__ next(self.gen) File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\os_helper.py", line 487, in temp_dir rmtree(path) File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\os_helper.py", line 444, in rmtree _rmtree(path) File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\os_helper.py", line 387, in _rmtree _waitfor(_rmtree_inner, path, waitall=True) File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\os_helper.py", line 332, in _waitfor func(pathname) File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\os_helper.py", line 386, in _rmtree_inner _force_run(fullname, os.unlink, fullname) File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\__init__.py", line 208, in _force_run return func(*args) ^^^^^^^^^^^ PermissionError: [WinError 32] The process cannot access the file because it is being used by another process: 'B:\\uildworker_temp\\test_python_db1rcni9\\tmp186spfwd\\script.py' Traceback (most recent call last): File "b:\uildarea\3.12.ware-win11.refleak\build\Lib\test\support\__init__.py", line 197, in _force_run return func(*args) ^^^^^^^^^^^ PermissionError: [WinError 32] The process cannot access the file because it is being used by another process: 'B:\\uildworker_temp\\test_python_db1rcni9\\tmp186spfwd\\script.py' Test report =========== Failed subtests: - test_basic_script - test.test_multiprocessing_main_handling.SpawnCmdLineTest.test_basic_script Test leaking resources: - test_typing: memory blocks Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE RHEL8 Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1158/builds/182 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-ppc64le Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.12.cstratak-RHEL8-ppc64le.refleak/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.12.cstratak-RHEL8-ppc64le.refleak/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1199/builds/176 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 5, done. remote: Counting objects: 20% (1/5) remote: Counting objects: 40% (2/5) remote: Counting objects: 60% (3/5) remote: Counting objects: 80% (4/5) remote: Counting objects: 100% (5/5) remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 33% (1/3) remote: Compressing objects: 66% (2/3) remote: Compressing objects: 100% (3/3) remote: Compressing objects: 100% (3/3), done. remote: Total 5 (delta 2), reused 3 (delta 2), pack-reused 0 From https://github.com/python/cpython * branch 3.12 -> FETCH_HEAD Note: switching to 'FETCH_HEAD'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 919be35eae [3.12] gh-112155: Run `typing.py` doctests during tests (GH-112156) (#112230) Switched to and reset branch '3.12' Objects/longobject.c: In function ‘long_format_binary’: Objects/longobject.c:2122:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 2122 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1998:9: note: ‘kind’ was declared here 1998 | int kind; | ^~~~ Objects/longobject.c: In function ‘long_to_decimal_string_internal’: Objects/longobject.c:1945:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 1945 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1769:9: note: ‘kind’ was declared here 1769 | int kind; | ^~~~ make: *** [Makefile:2013: buildbottest] Error 2 Test report =========== Failed tests: - test_typing Test leaking resources: - test_typing: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org Nov. 19, 2023

Nov. 19, 2023

The Buildbot has detected a new failure on builder PPC64LE RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/361/builds/4332 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/458/builds/4308 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora Stable LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/101/builds/4008 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, DPR <dpr-0xff(a)pm.me> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/341/builds/4239 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/4824 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/559/builds/4173 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/831/builds/4046 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, DPR <dpr-0xff(a)pm.me> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora Stable Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/451/builds/3846 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, DPR <dpr-0xff(a)pm.me> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.clang-installed/build/target/lib/python3.13/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.clang-installed/build/target/lib/python3.13/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/207/builds/4312 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.13/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.13/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/531/builds/4849 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/target/lib/python3.13/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang-installed/build/target/lib/python3.13/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/566/builds/4143 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.clang/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/864/builds/4340 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora Stable Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/435/builds/3854 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, DPR <dpr-0xff(a)pm.me>, Donghee Na <donghee.na(a)python.org> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.clang/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/3/builds/4981 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.clang/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/538/builds/4152 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-rawhide-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/567/builds/5314 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/223/builds/4832 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora Stable 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/90/builds/4025 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-ppc64le Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com>, DPR <dpr-0xff(a)pm.me> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/442/builds/5386 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/838/builds/4263 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-x86_64/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/271/builds/4245 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/509/builds/5322 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-rhel8-z/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora Stable LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/541/builds/3579 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-ppc64le Build Reason: <unknown> Blamelist: AN Long <aisk(a)users.noreply.github.com>, Anthony Shaw <anthony.p.shaw(a)gmail.com>, DPR <dpr-0xff(a)pm.me>, Donghee Na <donghee.na(a)python.org> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-ppc64le.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/29/builds/5172 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/338/builds/5565 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/64/builds/5566 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64.lto/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable Clang Installed 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/350/builds/4893 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.clang-installed/build/target/lib/python3.13/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.clang-installed/build/target/lib/python3.13/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/441/builds/4889 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64.clang/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/78/builds/5852 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/568/builds/5326 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/543/builds/4881 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-x86_64/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL Refleaks 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1226/builds/557 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.refleak.nogil/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/185/builds/5525 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-x86_64/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/529/builds/5404 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-aarch64/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 FIPS Only Blake2 Builtin Hash 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/469/builds/6600 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-fips-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 FIPS Only Blake2 Builtin Hash 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/828/builds/5008 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-fips-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/test/test_concurrent_futures/test_shutdown.py", line 50, in test_interpreter_shutdown self.assertEqual(out.strip(), b"apple") AssertionError: b'' != b'apple' Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.cstratak-CentOS9-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test.test_concurrent_futures.test_shutdown - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest - test_interpreter_shutdown - test.test_concurrent_futures.test_shutdown.ProcessPoolForkProcessPoolShutdownTest.test_interpreter_shutdown Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Ubuntu 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/708/builds/5133 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: skumaran-ubuntu-x86_64 Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.skumaran-ubuntu-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.x.skumaran-ubuntu-x86_64/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Debian Clang LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1084/builds/2646 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: gps-arm64-debian Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/var/lib/buildbot/workers/arm64-clang/3.x.gps-arm64-debian.clang.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/var/lib/buildbot/workers/arm64-clang/3.x.gps-arm64-debian.clang.lto-pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Ubuntu NoGIL 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1225/builds/701 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: itamaro-ubuntu-aws Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/ubuntu/buildarea/3.x.itamaro-ubuntu-aws.nogil/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Debian PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/249/builds/6991 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: gps-debian-profile-opt Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/var/lib/buildbot/workers/enable-optimizations-bot/3.x.gps-debian-profile-opt.pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/var/lib/buildbot/workers/enable-optimizations-bot/3.x.gps-debian-profile-opt.pgo/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x SLES 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/540/builds/7204 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-sles-z/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 FreeBSD 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1223/builds/810 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: ware-freebsd Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/buildbot/buildarea/3.x.ware-freebsd/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/buildbot/buildarea/3.x.ware-freebsd/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Debian 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/49/builds/7242 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-debian-z Build Reason: <unknown> Blamelist: Anthony Shaw <anthony.p.shaw(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.x.edelsohn-debian-z/build/Lib/tkinter/__init__.py", line 2405, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.11)
by buildbot＠python.org Nov. 19, 2023

Nov. 19, 2023

The Buildbot has detected a new failure on builder aarch64 CentOS9 LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/931/builds/1202 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-aarch64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-aarch64.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/975/builds/954 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1013/builds/1151 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-x86_64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-x86_64.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 CentOS9 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/936/builds/1193 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-aarch64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-aarch64.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Stable LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/984/builds/1031 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1023/builds/1049 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/951/builds/1161 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-x86_64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-x86_64.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang Installed 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/958/builds/1055 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.clang-installed/build/target/lib/python3.11/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.clang-installed/build/target/lib/python3.11/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/953/builds/1051 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z.clang/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/956/builds/934 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/994/builds/1158 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-x86_64/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Stable Clang Installed 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1004/builds/1032 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.clang-installed/build/target/lib/python3.11/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.clang-installed/build/target/lib/python3.11/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/959/builds/1117 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1017/builds/1044 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-fedora-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-fedora-z/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Stable Clang 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/971/builds/1031 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64.clang/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Fedora Stable 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/990/builds/1030 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-aarch64/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/945/builds/1111 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/989/builds/1017 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE CentOS9 LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1026/builds/1058 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-ppc64le Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-ppc64le.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-ppc64le.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/996/builds/1107 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-rhel8-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/928/builds/1188 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-aarch64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-aarch64.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable Clang Installed 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1015/builds/1021 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.clang-installed/build/target/lib/python3.11/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.clang-installed/build/target/lib/python3.11/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable Clang 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1034/builds/1018 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.clang/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64.clang/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE CentOS9 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1035/builds/1051 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-ppc64le Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-ppc64le.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-ppc64le.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1009/builds/1173 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-aarch64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-aarch64.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/925/builds/1183 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-x86_64.lto/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-x86_64.lto/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora Stable 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/942/builds/1018 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-fedora-stable-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-fedora-stable-x86_64/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1039/builds/1178 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-x86_64.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-x86_64.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 RHEL8 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/960/builds/1163 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-aarch64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-aarch64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-aarch64/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/929/builds/1192 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-x86_64/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE CentOS9 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/970/builds/1055 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-ppc64le Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-ppc64le/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-ppc64le/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Ubuntu 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1029/builds/950 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: skumaran-ubuntu-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.skumaran-ubuntu-x86_64/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.skumaran-ubuntu-x86_64/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 FIPS Only Blake2 Builtin Hash 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/962/builds/1225 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-RHEL8-fips-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-RHEL8-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 CentOS9 FIPS Only Blake2 Builtin Hash 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/923/builds/1291 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: cstratak-CentOS9-fips-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/buildbot/buildarea/3.11.cstratak-CentOS9-fips-x86_64.no-builtin-hashes-except-blake2/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Debian Clang LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1085/builds/581 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: gps-arm64-debian Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/var/lib/buildbot/workers/arm64-clang/3.11.gps-arm64-debian.clang.lto-pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/var/lib/buildbot/workers/arm64-clang/3.11.gps-arm64-debian.clang.lto-pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Debian PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1024/builds/1334 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: gps-debian-profile-opt Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/var/lib/buildbot/workers/enable-optimizations-bot/3.11.gps-debian-profile-opt.pgo/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/var/lib/buildbot/workers/enable-optimizations-bot/3.11.gps-debian-profile-opt.pgo/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Debian 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/944/builds/1398 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-debian-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-debian-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-debian-z/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x SLES 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1006/builds/1392 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: edelsohn-sles-z Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-sles-z/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-sles-z/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 FreeBSD 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1218/builds/226 Buildbot URL: https://buildbot.python.org/all/ Worker for this Build: ware-freebsd Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/buildbot/buildarea/3.11.ware-freebsd/build/Lib/idlelib/idle_test/test_debugger.py", line 282, in setUpClass cls.root = Tk() ^^^^ File "/buildbot/buildarea/3.11.ware-freebsd/build/Lib/tkinter/__init__.py", line 2326, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ _tkinter.TclError: no display name and no $DISPLAY environment variable Test report =========== Failed tests: - test_idle Failed subtests: - setUpClass - idlelib.idle_test.test_debugger.NameSpaceTest Sincerely, -The Buildbot

1 0