Mailman 3 November 2025 - Buildbot-status

☠ Buildbot (Python): python/cpython - failed test (failure) (3.13)
by buildbot＠python.org Nov. 30, 2025

Nov. 30, 2025

The Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1472/builds/883 Buildbot URL: https://buildbot.python.org/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Itamar Oren <itamarost(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 104, done. remote: Counting objects: 2% (1/45) remote: Counting objects: 4% (2/45) remote: Counting objects: 6% (3/45) remote: Counting objects: 8% (4/45) remote: Counting objects: 11% (5/45) remote: Counting objects: 13% (6/45) remote: Counting objects: 15% (7/45) remote: Counting objects: 17% (8/45) remote: Counting objects: 20% (9/45) remote: Counting objects: 22% (10/45) remote: Counting objects: 24% (11/45) remote: Counting objects: 26% (12/45) remote: Counting objects: 28% (13/45) remote: Counting objects: 31% (14/45) remote: Counting objects: 33% (15/45) remote: Counting objects: 35% (16/45) remote: Counting objects: 37% (17/45) remote: Counting objects: 40% (18/45) remote: Counting objects: 42% (19/45) remote: Counting objects: 44% (20/45) remote: Counting objects: 46% (21/45) remote: Counting objects: 48% (22/45) remote: Counting objects: 51% (23/45) remote: Counting objects: 53% (24/45) remote: Counting objects: 55% (25/45) remote: Counting objects: 57% (26/45) remote: Counting objects: 60% (27/45) remote: Counting objects: 62% (28/45) remote: Counting objects: 64% (29/45) remote: Counting objects: 66% (30/45) remote: Counting objects: 68% (31/45) remote: Counting objects: 71% (32/45) remote: Counting objects: 73% (33/45) remote: Counting objects: 75% (34/45) remote: Counting objects: 77% (35/45) remote: Counting objects: 80% (36/45) remote: Counting objects: 82% (37/45) remote: Counting objects: 84% (38/45) remote: Counting objects: 86% (39/45) remote: Counting objects: 88% (40/45) remote: Counting objects: 91% (41/45) remote: Counting objects: 93% (42/45) remote: Counting objects: 95% (43/45) remote: Counting objects: 97% (44/45) remote: Counting objects: 100% (45/45) remote: Counting objects: 100% (45/45), done. remote: Compressing objects: 3% (1/30) remote: Compressing objects: 6% (2/30) remote: Compressing objects: 10% (3/30) remote: Compressing objects: 13% (4/30) remote: Compressing objects: 16% (5/30) remote: Compressing objects: 20% (6/30) remote: Compressing objects: 23% (7/30) remote: Compressing objects: 26% (8/30) remote: Compressing objects: 30% (9/30) remote: Compressing objects: 33% (10/30) remote: Compressing objects: 36% (11/30) remote: Compressing objects: 40% (12/30) remote: Compressing objects: 43% (13/30) remote: Compressing objects: 46% (14/30) remote: Compressing objects: 50% (15/30) remote: Compressing objects: 53% (16/30) remote: Compressing objects: 56% (17/30) remote: Compressing objects: 60% (18/30) remote: Compressing objects: 63% (19/30) remote: Compressing objects: 66% (20/30) remote: Compressing objects: 70% (21/30) remote: Compressing objects: 73% (22/30) remote: Compressing objects: 76% (23/30) remote: Compressing objects: 80% (24/30) remote: Compressing objects: 83% (25/30) remote: Compressing objects: 86% (26/30) remote: Compressing objects: 90% (27/30) remote: Compressing objects: 93% (28/30) remote: Compressing objects: 96% (29/30) remote: Compressing objects: 100% (30/30) remote: Compressing objects: 100% (30/30), done. Receiving objects: 0% (1/104) Receiving objects: 1% (2/104) Receiving objects: 2% (3/104) Receiving objects: 3% (4/104) Receiving objects: 4% (5/104) Receiving objects: 5% (6/104) Receiving objects: 6% (7/104) Receiving objects: 7% (8/104) Receiving objects: 8% (9/104) Receiving objects: 9% (10/104) Receiving objects: 10% (11/104) Receiving objects: 11% (12/104) Receiving objects: 12% (13/104) Receiving objects: 13% (14/104) Receiving objects: 14% (15/104) Receiving objects: 15% (16/104) Receiving objects: 16% (17/104) Receiving objects: 17% (18/104) Receiving objects: 18% (19/104) Receiving objects: 19% (20/104) Receiving objects: 20% (21/104) Receiving objects: 21% (22/104) Receiving objects: 22% (23/104) Receiving objects: 23% (24/104) Receiving objects: 24% (25/104) Receiving objects: 25% (26/104) Receiving objects: 26% (28/104) Receiving objects: 27% (29/104) Receiving objects: 28% (30/104) Receiving objects: 29% (31/104) Receiving objects: 30% (32/104) Receiving objects: 31% (33/104) Receiving objects: 32% (34/104) Receiving objects: 33% (35/104) Receiving objects: 34% (36/104) Receiving objects: 35% (37/104) Receiving objects: 36% (38/104) Receiving objects: 37% (39/104) Receiving objects: 38% (40/104) Receiving objects: 39% (41/104) Receiving objects: 40% (42/104) Receiving objects: 41% (43/104) Receiving objects: 42% (44/104) Receiving objects: 43% (45/104) Receiving objects: 44% (46/104) Receiving objects: 45% (47/104) Receiving objects: 46% (48/104) Receiving objects: 47% (49/104) Receiving objects: 48% (50/104) Receiving objects: 49% (51/104) Receiving objects: 50% (52/104) Receiving objects: 51% (54/104) Receiving objects: 52% (55/104) Receiving objects: 53% (56/104) Receiving objects: 54% (57/104) Receiving objects: 55% (58/104) Receiving objects: 56% (59/104) Receiving objects: 57% (60/104) Receiving objects: 58% (61/104) Receiving objects: 59% (62/104) Receiving objects: 60% (63/104) Receiving objects: 61% (64/104) Receiving objects: 62% (65/104) Receiving objects: 63% (66/104) Receiving objects: 64% (67/104) Receiving objects: 65% (68/104) Receiving objects: 66% (69/104) Receiving objects: 67% (70/104) Receiving objects: 68% (71/104) Receiving objects: 69% (72/104) Receiving objects: 70% (73/104) Receiving objects: 71% (74/104) Receiving objects: 72% (75/104) Receiving objects: 73% (76/104) Receiving objects: 74% (77/104) Receiving objects: 75% (78/104) Receiving objects: 76% (80/104) Receiving objects: 77% (81/104) Receiving objects: 78% (82/104) Receiving objects: 79% (83/104) Receiving objects: 80% (84/104) Receiving objects: 81% (85/104) Receiving objects: 82% (86/104) Receiving objects: 83% (87/104) Receiving objects: 84% (88/104) Receiving objects: 85% (89/104) Receiving objects: 86% (90/104) Receiving objects: 87% (91/104) Receiving objects: 88% (92/104) Receiving objects: 89% (93/104) Receiving objects: 90% (94/104) Receiving objects: 91% (95/104) Receiving objects: 92% (96/104) Receiving objects: 93% (97/104) Receiving objects: 94% (98/104) Receiving objects: 95% (99/104) remote: Total 104 (delta 26), reused 15 (delta 15), pack-reused 59 (from 2) Receiving objects: 96% (100/104) Receiving objects: 97% (101/104) Receiving objects: 98% (102/104) Receiving objects: 99% (103/104) Receiving objects: 100% (104/104) Receiving objects: 100% (104/104), 390.65 KiB | 4.60 MiB/s, done. Resolving deltas: 0% (0/54) Resolving deltas: 1% (1/54) Resolving deltas: 3% (2/54) Resolving deltas: 5% (3/54) Resolving deltas: 7% (4/54) Resolving deltas: 9% (5/54) Resolving deltas: 11% (6/54) Resolving deltas: 12% (7/54) Resolving deltas: 14% (8/54) Resolving deltas: 16% (9/54) Resolving deltas: 18% (10/54) Resolving deltas: 20% (11/54) Resolving deltas: 22% (12/54) Resolving deltas: 24% (13/54) Resolving deltas: 25% (14/54) Resolving deltas: 27% (15/54) Resolving deltas: 29% (16/54) Resolving deltas: 31% (17/54) Resolving deltas: 33% (18/54) Resolving deltas: 35% (19/54) Resolving deltas: 37% (20/54) Resolving deltas: 38% (21/54) Resolving deltas: 40% (22/54) Resolving deltas: 42% (23/54) Resolving deltas: 44% (24/54) Resolving deltas: 46% (25/54) Resolving deltas: 50% (27/54) Resolving deltas: 51% (28/54) Resolving deltas: 53% (29/54) Resolving deltas: 55% (30/54) Resolving deltas: 57% (31/54) Resolving deltas: 59% (32/54) Resolving deltas: 61% (33/54) Resolving deltas: 62% (34/54) Resolving deltas: 64% (35/54) Resolving deltas: 66% (36/54) Resolving deltas: 68% (37/54) Resolving deltas: 70% (38/54) Resolving deltas: 72% (39/54) Resolving deltas: 74% (40/54) Resolving deltas: 75% (41/54) Resolving deltas: 77% (42/54) Resolving deltas: 79% (43/54) Resolving deltas: 81% (44/54) Resolving deltas: 83% (45/54) Resolving deltas: 85% (46/54) Resolving deltas: 87% (47/54) Resolving deltas: 88% (48/54) Resolving deltas: 90% (49/54) Resolving deltas: 92% (50/54) Resolving deltas: 94% (51/54) Resolving deltas: 96% (52/54) Resolving deltas: 98% (53/54) Resolving deltas: 100% (54/54) Resolving deltas: 100% (54/54), completed with 5 local objects. From https://github.com/python/cpython * branch 3.13 -> FETCH_HEAD Note: switching to '99b70fe4ebf70c4d4fec4752058e6175e6802b74'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 99b70fe4ebf [3.13] gh-74389: gh-70560: subprocess.Popen.communicate() now ignores stdin.flush error when closed (GH-142061) (#142065) Switched to and reset branch '3.13' make: *** [Makefile:2252: buildbottest] Error 2 Test report =========== Failed tests: - test_urllib2net Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org Nov. 30, 2025

Nov. 30, 2025

The Buildbot has detected a new failure on builder s390x Fedora Stable Refleaks 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1641/builds/1316 Buildbot URL: https://buildbot.python.org/ Worker for this Build: cstratak-fedora-stable-s390x Build Reason: <unknown> Blamelist: Adam Turner <9087854+AA-Turner(a)users.noreply.github.com>, Artur Jamro <artur.jamro(a)gmail.com>, Chris Eibl <138194463+chris-eibl(a)users.noreply.github.com>, Cody Maloney <cmaloney(a)users.noreply.github.com>, Gregory P. Smith <68491+gpshead(a)users.noreply.github.com>, Hugo van Kemenade <1324225+hugovk(a)users.noreply.github.com>, Moshe Kaplan <mosheekaplan(a)gmail.com>, Sebastian Pipping <sebastian(a)pipping.org>, Victor Stinner <vstinner(a)python.org>, dgpb <3577712+dg-pb(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-s390x.refleak/build/Lib/test/test_imaplib.py", line 616, in test_idle_delayed_packet self.assertRaises(StopIteration, next, idler) ~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: StopIteration not raised by next Traceback (most recent call last): File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-s390x.refleak/build/Lib/test/test_profiling/test_sampling_profiler/test_modes.py", line 163, in test_cpu_mode_integration_filtering with test_subprocess(cpu_vs_idle_script) as subproc: ~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-s390x.refleak/build/Lib/contextlib.py", line 141, in __enter__ return next(self.gen) File "/home/buildbot/buildarea/3.x.cstratak-fedora-stable-s390x.refleak/build/Lib/test/test_profiling/test_sampling_profiler/helpers.py", line 85, in test_subprocess raise RuntimeError( f"Unexpected response from subprocess: {response!r}" ) RuntimeError: Unexpected response from subprocess: b'readythreads_ready' Test report =========== Failed tests: - test_profiling Failed subtests: - test_idle_delayed_packet - test.test_imaplib.NewIMAPTests.test_idle_delayed_packet Test leaking resources: - test_imaplib: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.13)
by buildbot＠python.org Nov. 29, 2025

Nov. 29, 2025

The Buildbot has detected a new failure on builder ARM64 MacOS M1 Refleaks NoGIL 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1396/builds/1818 Buildbot URL: https://buildbot.python.org/ Worker for this Build: itamaro-macos-arm64-aws Build Reason: <unknown> Blamelist: Itamar Oren <itamarost(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/Users/buildbot/buildarea/3.13.itamaro-macos-arm64-aws.macos-with-brew.refleak.nogil/build/Lib/test/_test_multiprocessing.py", line 1493, in test_repr_rlock self.assertEqual('<RLock(SomeOtherThread, nonzero)>', repr(lock)) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '<RLock(SomeOtherThread, nonzero)>' != '<RLock(None, 0)>' - <RLock(SomeOtherThread, nonzero)> + <RLock(None, 0)> Test report =========== Failed tests: - test.test_multiprocessing_forkserver.test_processes Failed subtests: - test_repr_rlock - test.test_multiprocessing_forkserver.test_processes.WithProcessesTestLock.test_repr_rlock Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.14)
by buildbot＠python.org Nov. 29, 2025

Nov. 29, 2025

The Buildbot has detected a new failure on builder AMD64 FreeBSD Refleaks 3.14 while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1800/builds/743 Buildbot URL: https://buildbot.python.org/ Worker for this Build: ware-freebsd Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/buildbot/buildarea/3.14.ware-freebsd.refleak/build/Lib/test/support/__init__.py", line 847, in gc_collect gc.collect() ResourceWarning: unclosed <socket.socket fd=9, family=2, type=1, proto=6, laddr=('127.0.0.1', 63223), raddr=('127.0.0.1', 63224)> Task was destroyed but it is pending! task: <Task pending name='Task-2667' coro=<BaseSelectorEventLoop._accept_connection2() done, defined at /buildbot/buildarea/3.14.ware-freebsd.refleak/build/Lib/asyncio/selector_events.py:217> wait_for=<Future pending cb=[Task.task_wakeup()]>> Warning -- Unraisable exception Exception ignored while calling deallocator <function _SelectorTransport.__del__ at 0x8467cbd10>: Traceback (most recent call last): File "/buildbot/buildarea/3.14.ware-freebsd.refleak/build/Lib/asyncio/selector_events.py", line 873, in __del__ _warn(f"unclosed transport {self!r}", ResourceWarning, source=self) ResourceWarning: unclosed transport <_SelectorSocketTransport closing fd=9> k Traceback (most recent call last): File "/buildbot/buildarea/3.14.ware-freebsd.refleak/build/Lib/test/support/__init__.py", line 847, in gc_collect gc.collect() ResourceWarning: unclosed <socket.socket fd=9, family=2, type=1, proto=6, laddr=('127.0.0.1', 12223), raddr=('127.0.0.1', 12224)> Task was destroyed but it is pending! task: <Task pending name='Task-320' coro=<BaseSelectorEventLoop._accept_connection2() done, defined at /buildbot/buildarea/3.14.ware-freebsd.refleak/build/Lib/asyncio/selector_events.py:217> wait_for=<Future pending cb=[Task.task_wakeup()]>> Warning -- Unraisable exception Exception ignored while calling deallocator <function _SelectorTransport.__del__ at 0x843167d10>: Traceback (most recent call last): File "/buildbot/buildarea/3.14.ware-freebsd.refleak/build/Lib/asyncio/selector_events.py", line 873, in __del__ _warn(f"unclosed transport {self!r}", ResourceWarning, source=self) ResourceWarning: unclosed transport <_SelectorSocketTransport closing fd=9> k Test report =========== Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org Nov. 29, 2025

Nov. 29, 2025

The Buildbot has detected a new failure on builder AMD64 Windows11 Refleaks 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/920/builds/2072 Buildbot URL: https://buildbot.python.org/ Worker for this Build: ware-win11 Build Reason: <unknown> Blamelist: Adorilson Bezerra <adorilson(a)gmail.com>, Alexander Nordin <alexander.f.nordin(a)gmail.com>, Alper <alperyoney(a)fb.com>, Christian Marangi <ansuelsmth(a)gmail.com>, Cody Maloney <cmaloney(a)users.noreply.github.com>, Guo Ci <zguoci(a)gmail.com>, Itamar Oren <itamarost(a)gmail.com>, Krishna Chaitanya <141550576+XChaitanyaX(a)users.noreply.github.com>, Miro Hrončok <miro(a)hroncok.cz>, Pablo Galindo Salgado <Pablogsal(a)gmail.com>, Paresh Joshi <rahulj9223(a)gmail.com>, Peter Bierma <zintensitydev(a)gmail.com>, Petr Viktorin <encukou(a)gmail.com>, SIVALANAGASHANKARNIVAS <nivassivala61(a)outlook.com>, Sam Gross <colesbury(a)gmail.com>, Satyam Kumar Verman <satyamvarman2004(a)gmail.com>, Sergey Miryanov <sergey.miryanov(a)gmail.com>, Stan Ulbrych <89152624+StanFromIreland(a)users.noreply.github.com>, Stefano Rivera <stefano(a)rivera.za.net>, SubbaraoGarlapati <53627478+SubbaraoGarlapati(a)users.noreply.github.com>, Victor Stinner <vstinner(a)python.org>, Yashraj <yashrajpala8(a)gmail.com>, dgpb <3577712+dg-pb(a)users.n oreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\test\test_profiling\test_sampling_profiler\test_integration.py", line 581, in <lambda> self.addCleanup(lambda x: shutil.rmtree(x), tempdir.name) ~~~~~~~~~~~~~^^^ File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\shutil.py", line 852, in rmtree _rmtree_impl(path, dir_fd, onexc) ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^ File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\shutil.py", line 711, in _rmtree_unsafe onexc(os.rmdir, path, err) ~~~~~^^^^^^^^^^^^^^^^^^^^^ File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\shutil.py", line 707, in _rmtree_unsafe os.rmdir(path) ~~~~~~~~^^^^^^ PermissionError: [WinError 32] The process cannot access the file because it is being used by another process: 'b:\\uildworker_temp\\test_python_0uzt3i0t\\tmpf86dybhy' Traceback (most recent call last): File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\test\test_profiling\test_sampling_profiler\test_integration.py", line 581, in <lambda> self.addCleanup(lambda x: shutil.rmtree(x), tempdir.name) ~~~~~~~~~~~~~^^^ File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\shutil.py", line 852, in rmtree _rmtree_impl(path, dir_fd, onexc) ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^ File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\shutil.py", line 711, in _rmtree_unsafe onexc(os.rmdir, path, err) ~~~~~^^^^^^^^^^^^^^^^^^^^^ File "b:\uildarea\3.x.ware-win11.refleak\build\Lib\shutil.py", line 707, in _rmtree_unsafe os.rmdir(path) ~~~~~~~~^^^^^^ PermissionError: [WinError 32] The process cannot access the file because it is being used by another process: 'b:\\uildworker_temp\\test_python_kyzqo6_2\\tmp9qejquzv' Test report =========== Failed tests: - test_profiling Failed subtests: - test_sample_target_module - test.test_profiling.test_sampling_profiler.test_integration.TestSampleProfilerIntegration.test_sample_target_module Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.13)
by buildbot＠python.org Nov. 27, 2025

Nov. 27, 2025

The Buildbot has detected a new failure on builder ARM64 MacOS M1 Refleaks NoGIL 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1396/builds/1814 Buildbot URL: https://buildbot.python.org/ Worker for this Build: itamaro-macos-arm64-aws Build Reason: <unknown> Blamelist: Alexander Nordin <alexander.f.nordin(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Petr Viktorin <encukou(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/Users/buildbot/buildarea/3.13.itamaro-macos-arm64-aws.macos-with-brew.refleak.nogil/build/Lib/test/_test_multiprocessing.py", line 1492, in test_repr_rlock self.assertEqual('<RLock(SomeOtherThread, nonzero)>', repr(lock)) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '<RLock(SomeOtherThread, nonzero)>' != '<RLock(None, 0)>' - <RLock(SomeOtherThread, nonzero)> + <RLock(None, 0)> Test report =========== Failed tests: - test.test_multiprocessing_spawn.test_processes - test.test_multiprocessing_forkserver.test_processes Failed subtests: - test_repr_rlock - test.test_multiprocessing_forkserver.test_processes.WithProcessesTestLock.test_repr_rlock - test_repr_rlock - test.test_multiprocessing_spawn.test_processes.WithProcessesTestLock.test_repr_rlock Test leaking resources: - test_processes: memory blocks Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.14)
by buildbot＠python.org Nov. 27, 2025

Nov. 27, 2025

The Buildbot has detected a new failure on builder AMD64 Arch Linux Usan Function 3.14 while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1702/builds/148 Buildbot URL: https://buildbot.python.org/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com>, Petr Viktorin <encukou(a)gmail.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 70, done. remote: Counting objects: 2% (1/50) remote: Counting objects: 4% (2/50) remote: Counting objects: 6% (3/50) remote: Counting objects: 8% (4/50) remote: Counting objects: 10% (5/50) remote: Counting objects: 12% (6/50) remote: Counting objects: 14% (7/50) remote: Counting objects: 16% (8/50) remote: Counting objects: 18% (9/50) remote: Counting objects: 20% (10/50) remote: Counting objects: 22% (11/50) remote: Counting objects: 24% (12/50) remote: Counting objects: 26% (13/50) remote: Counting objects: 28% (14/50) remote: Counting objects: 30% (15/50) remote: Counting objects: 32% (16/50) remote: Counting objects: 34% (17/50) remote: Counting objects: 36% (18/50) remote: Counting objects: 38% (19/50) remote: Counting objects: 40% (20/50) remote: Counting objects: 42% (21/50) remote: Counting objects: 44% (22/50) remote: Counting objects: 46% (23/50) remote: Counting objects: 48% (24/50) remote: Counting objects: 50% (25/50) remote: Counting objects: 52% (26/50) remote: Counting objects: 54% (27/50) remote: Counting objects: 56% (28/50) remote: Counting objects: 58% (29/50) remote: Counting objects: 60% (30/50) remote: Counting objects: 62% (31/50) remote: Counting objects: 64% (32/50) remote: Counting objects: 66% (33/50) remote: Counting objects: 68% (34/50) remote: Counting objects: 70% (35/50) remote: Counting objects: 72% (36/50) remote: Counting objects: 74% (37/50) remote: Counting objects: 76% (38/50) remote: Counting objects: 78% (39/50) remote: Counting objects: 80% (40/50) remote: Counting objects: 82% (41/50) remote: Counting objects: 84% (42/50) remote: Counting objects: 86% (43/50) remote: Counting objects: 88% (44/50) remote: Counting objects: 90% (45/50) remote: Counting objects: 92% (46/50) remote: Counting objects: 94% (47/50) remote: Counting objects: 96% (48/50) remote: Counting objects: 98% (49/50) remote: Counting objects: 100% (50/50) remote: Counting objects: 100% (50/50), done. remote: Compressing objects: 3% (1/28) remote: Compressing objects: 7% (2/28) remote: Compressing objects: 10% (3/28) remote: Compressing objects: 14% (4/28) remote: Compressing objects: 17% (5/28) remote: Compressing objects: 21% (6/28) remote: Compressing objects: 25% (7/28) remote: Compressing objects: 28% (8/28) remote: Compressing objects: 32% (9/28) remote: Compressing objects: 35% (10/28) remote: Compressing objects: 39% (11/28) remote: Compressing objects: 42% (12/28) remote: Compressing objects: 46% (13/28) remote: Compressing objects: 50% (14/28) remote: Compressing objects: 53% (15/28) remote: Compressing objects: 57% (16/28) remote: Compressing objects: 60% (17/28) remote: Compressing objects: 64% (18/28) remote: Compressing objects: 67% (19/28) remote: Compressing objects: 71% (20/28) remote: Compressing objects: 75% (21/28) remote: Compressing objects: 78% (22/28) remote: Compressing objects: 82% (23/28) remote: Compressing objects: 85% (24/28) remote: Compressing objects: 89% (25/28) remote: Compressing objects: 92% (26/28) remote: Compressing objects: 96% (27/28) remote: Compressing objects: 100% (28/28) remote: Compressing objects: 100% (28/28), done. remote: Total 70 (delta 26), reused 23 (delta 22), pack-reused 20 (from 3) From https://github.com/python/cpython * branch 3.14 -> FETCH_HEAD Note: switching to 'f47e928574187ae97c778e326739b3aa0c7dc765'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at f47e9285741 [3.14] gh-116738: Fix thread-safety issue in re module for free threading (gh-141923) (gh-141990) Switched to and reset branch '3.14' make: *** [Makefile:2496: buildbottest] Error 2 Test report =========== Failed tests: - test_urllib2net Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org Nov. 27, 2025

Nov. 27, 2025

The Buildbot has detected a new failure on builder AMD64 Arch Linux Perf 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1078/builds/4764 Buildbot URL: https://buildbot.python.org/ Worker for this Build: pablogsal-arch-x86_64 Build Reason: <unknown> Blamelist: Alper <alperyoney(a)fb.com>, Cody Maloney <cmaloney(a)users.noreply.github.com>, Guo Ci <zguoci(a)gmail.com>, Itamar Oren <itamarost(a)gmail.com>, Peter Bierma <zintensitydev(a)gmail.com>, Petr Viktorin <encukou(a)gmail.com>, Sergey Miryanov <sergey.miryanov(a)gmail.com>, Stan Ulbrych <89152624+StanFromIreland(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== remote: Enumerating objects: 128, done. remote: Counting objects: 1% (1/85) remote: Counting objects: 2% (2/85) remote: Counting objects: 3% (3/85) remote: Counting objects: 4% (4/85) remote: Counting objects: 5% (5/85) remote: Counting objects: 7% (6/85) remote: Counting objects: 8% (7/85) remote: Counting objects: 9% (8/85) remote: Counting objects: 10% (9/85) remote: Counting objects: 11% (10/85) remote: Counting objects: 12% (11/85) remote: Counting objects: 14% (12/85) remote: Counting objects: 15% (13/85) remote: Counting objects: 16% (14/85) remote: Counting objects: 17% (15/85) remote: Counting objects: 18% (16/85) remote: Counting objects: 20% (17/85) remote: Counting objects: 21% (18/85) remote: Counting objects: 22% (19/85) remote: Counting objects: 23% (20/85) remote: Counting objects: 24% (21/85) remote: Counting objects: 25% (22/85) remote: Counting objects: 27% (23/85) remote: Counting objects: 28% (24/85) remote: Counting objects: 29% (25/85) remote: Counting objects: 30% (26/85) remote: Counting objects: 31% (27/85) remote: Counting objects: 32% (28/85) remote: Counting objects: 34% (29/85) remote: Counting objects: 35% (30/85) remote: Counting objects: 36% (31/85) remote: Counting objects: 37% (32/85) remote: Counting objects: 38% (33/85) remote: Counting objects: 40% (34/85) remote: Counting objects: 41% (35/85) remote: Counting objects: 42% (36/85) remote: Counting objects: 43% (37/85) remote: Counting objects: 44% (38/85) remote: Counting objects: 45% (39/85) remote: Counting objects: 47% (40/85) remote: Counting objects: 48% (41/85) remote: Counting objects: 49% (42/85) remote: Counting objects: 50% (43/85) remote: Counting objects: 51% (44/85) remote: Counting objects: 52% (45/85) remote: Counting objects: 54% (46/85) remote: Counting objects: 55% (47/85) remote: Counting objects: 56% (48/85) remote: Counting objects: 57% (49/85) remote: Counting objects: 58% (50/85) remote: Counting objects: 60% (51/85) remote: Counting objects: 61% (52/85) remote: Counting objects: 62% (53/85) remote: Counting objects: 63% (54/85) remote: Counting objects: 64% (55/85) remote: Counting objects: 65% (56/85) remote: Counting objects: 67% (57/85) remote: Counting objects: 68% (58/85) remote: Counting objects: 69% (59/85) remote: Counting objects: 70% (60/85) remote: Counting objects: 71% (61/85) remote: Counting objects: 72% (62/85) remote: Counting objects: 74% (63/85) remote: Counting objects: 75% (64/85) remote: Counting objects: 76% (65/85) remote: Counting objects: 77% (66/85) remote: Counting objects: 78% (67/85) remote: Counting objects: 80% (68/85) remote: Counting objects: 81% (69/85) remote: Counting objects: 82% (70/85) remote: Counting objects: 83% (71/85) remote: Counting objects: 84% (72/85) remote: Counting objects: 85% (73/85) remote: Counting objects: 87% (74/85) remote: Counting objects: 88% (75/85) remote: Counting objects: 89% (76/85) remote: Counting objects: 90% (77/85) remote: Counting objects: 91% (78/85) remote: Counting objects: 92% (79/85) remote: Counting objects: 94% (80/85) remote: Counting objects: 95% (81/85) remote: Counting objects: 96% (82/85) remote: Counting objects: 97% (83/85) remote: Counting objects: 98% (84/85) remote: Counting objects: 100% (85/85) remote: Counting objects: 100% (85/85), done. remote: Compressing objects: 1% (1/52) remote: Compressing objects: 3% (2/52) remote: Compressing objects: 5% (3/52) remote: Compressing objects: 7% (4/52) remote: Compressing objects: 9% (5/52) remote: Compressing objects: 11% (6/52) remote: Compressing objects: 13% (7/52) remote: Compressing objects: 15% (8/52) remote: Compressing objects: 17% (9/52) remote: Compressing objects: 19% (10/52) remote: Compressing objects: 21% (11/52) remote: Compressing objects: 23% (12/52) remote: Compressing objects: 25% (13/52) remote: Compressing objects: 26% (14/52) remote: Compressing objects: 28% (15/52) remote: Compressing objects: 30% (16/52) remote: Compressing objects: 32% (17/52) remote: Compressing objects: 34% (18/52) remote: Compressing objects: 36% (19/52) remote: Compressing objects: 38% (20/52) remote: Compressing objects: 40% (21/52) remote: Compressing objects: 42% (22/52) remote: Compressing objects: 44% (23/52) remote: Compressing objects: 46% (24/52) remote: Compressing objects: 48% (25/52) remote: Compressing objects: 50% (26/52) remote: Compressing objects: 51% (27/52) remote: Compressing objects: 53% (28/52) remote: Compressing objects: 55% (29/52) remote: Compressing objects: 57% (30/52) remote: Compressing objects: 59% (31/52) remote: Compressing objects: 61% (32/52) remote: Compressing objects: 63% (33/52) remote: Compressing objects: 65% (34/52) remote: Compressing objects: 67% (35/52) remote: Compressing objects: 69% (36/52) remote: Compressing objects: 71% (37/52) remote: Compressing objects: 73% (38/52) remote: Compressing objects: 75% (39/52) remote: Compressing objects: 76% (40/52) remote: Compressing objects: 78% (41/52) remote: Compressing objects: 80% (42/52) remote: Compressing objects: 82% (43/52) remote: Compressing objects: 84% (44/52) remote: Compressing objects: 86% (45/52) remote: Compressing objects: 88% (46/52) remote: Compressing objects: 90% (47/52) remote: Compressing objects: 92% (48/52) remote: Compressing objects: 94% (49/52) remote: Compressing objects: 96% (50/52) remote: Compressing objects: 98% (51/52) remote: Compressing objects: 100% (52/52) remote: Compressing objects: 100% (52/52), done. Receiving objects: 0% (1/128) Receiving objects: 1% (2/128) Receiving objects: 2% (3/128) Receiving objects: 3% (4/128) Receiving objects: 4% (6/128) Receiving objects: 5% (7/128) Receiving objects: 6% (8/128) Receiving objects: 7% (9/128) Receiving objects: 8% (11/128) Receiving objects: 9% (12/128) Receiving objects: 10% (13/128) Receiving objects: 11% (15/128) Receiving objects: 12% (16/128) Receiving objects: 13% (17/128) Receiving objects: 14% (18/128) Receiving objects: 15% (20/128) Receiving objects: 16% (21/128) Receiving objects: 17% (22/128) Receiving objects: 18% (24/128) Receiving objects: 19% (25/128) Receiving objects: 20% (26/128) Receiving objects: 21% (27/128) Receiving objects: 22% (29/128) Receiving objects: 23% (30/128) Receiving objects: 24% (31/128) Receiving objects: 25% (32/128) Receiving objects: 26% (34/128) Receiving objects: 27% (35/128) Receiving objects: 28% (36/128) Receiving objects: 29% (38/128) Receiving objects: 30% (39/128) Receiving objects: 31% (40/128) Receiving objects: 32% (41/128) Receiving objects: 33% (43/128) Receiving objects: 34% (44/128) Receiving objects: 35% (45/128) Receiving objects: 36% (47/128) Receiving objects: 37% (48/128) Receiving objects: 38% (49/128) Receiving objects: 39% (50/128) Receiving objects: 40% (52/128) Receiving objects: 41% (53/128) Receiving objects: 42% (54/128) Receiving objects: 43% (56/128) Receiving objects: 44% (57/128) Receiving objects: 45% (58/128) Receiving objects: 46% (59/128) Receiving objects: 47% (61/128) Receiving objects: 48% (62/128) Receiving objects: 49% (63/128) Receiving objects: 50% (64/128) Receiving objects: 51% (66/128) Receiving objects: 52% (67/128) Receiving objects: 53% (68/128) Receiving objects: 54% (70/128) Receiving objects: 55% (71/128) Receiving objects: 56% (72/128) Receiving objects: 57% (73/128) Receiving objects: 58% (75/128) Receiving objects: 59% (76/128) Receiving objects: 60% (77/128) Receiving objects: 61% (79/128) Receiving objects: 62% (80/128) Receiving objects: 63% (81/128) Receiving objects: 64% (82/128) Receiving objects: 65% (84/128) Receiving objects: 66% (85/128) Receiving objects: 67% (86/128) Receiving objects: 68% (88/128) Receiving objects: 69% (89/128) Receiving objects: 70% (90/128) Receiving objects: 71% (91/128) Receiving objects: 72% (93/128) Receiving objects: 73% (94/128) Receiving objects: 74% (95/128) Receiving objects: 75% (96/128) Receiving objects: 76% (98/128) Receiving objects: 77% (99/128) Receiving objects: 78% (100/128) Receiving objects: 79% (102/128) Receiving objects: 80% (103/128) Receiving objects: 81% (104/128) Receiving objects: 82% (105/128) Receiving objects: 83% (107/128) Receiving objects: 84% (108/128) Receiving objects: 85% (109/128) Receiving objects: 86% (111/128) Receiving objects: 87% (112/128) Receiving objects: 88% (113/128) Receiving objects: 89% (114/128) Receiving objects: 90% (116/128) Receiving objects: 91% (117/128) Receiving objects: 92% (118/128) Receiving objects: 93% (120/128) Receiving objects: 94% (121/128) Receiving objects: 95% (122/128) Receiving objects: 96% (123/128) remote: Total 128 (delta 55), reused 33 (delta 33), pack-reused 43 (from 2) Receiving objects: 97% (125/128) Receiving objects: 98% (126/128) Receiving objects: 99% (127/128) Receiving objects: 100% (128/128) Receiving objects: 100% (128/128), 440.40 KiB | 6.67 MiB/s, done. Resolving deltas: 0% (0/55) Resolving deltas: 1% (1/55) Resolving deltas: 3% (2/55) Resolving deltas: 5% (3/55) Resolving deltas: 7% (4/55) Resolving deltas: 9% (5/55) Resolving deltas: 10% (6/55) Resolving deltas: 12% (7/55) Resolving deltas: 14% (8/55) Resolving deltas: 16% (9/55) Resolving deltas: 18% (10/55) Resolving deltas: 20% (11/55) Resolving deltas: 21% (12/55) Resolving deltas: 23% (13/55) Resolving deltas: 25% (14/55) Resolving deltas: 27% (15/55) Resolving deltas: 29% (16/55) Resolving deltas: 30% (17/55) Resolving deltas: 32% (18/55) Resolving deltas: 34% (19/55) Resolving deltas: 36% (20/55) Resolving deltas: 38% (21/55) Resolving deltas: 40% (22/55) Resolving deltas: 41% (23/55) Resolving deltas: 43% (24/55) Resolving deltas: 45% (25/55) Resolving deltas: 47% (26/55) Resolving deltas: 49% (27/55) Resolving deltas: 52% (29/55) Resolving deltas: 54% (30/55) Resolving deltas: 56% (31/55) Resolving deltas: 58% (32/55) Resolving deltas: 60% (33/55) Resolving deltas: 61% (34/55) Resolving deltas: 63% (35/55) Resolving deltas: 67% (37/55) Resolving deltas: 69% (38/55) Resolving deltas: 70% (39/55) Resolving deltas: 72% (40/55) Resolving deltas: 74% (41/55) Resolving deltas: 76% (42/55) Resolving deltas: 78% (43/55) Resolving deltas: 80% (44/55) Resolving deltas: 81% (45/55) Resolving deltas: 83% (46/55) Resolving deltas: 85% (47/55) Resolving deltas: 87% (48/55) Resolving deltas: 89% (49/55) Resolving deltas: 90% (50/55) Resolving deltas: 92% (51/55) Resolving deltas: 94% (52/55) Resolving deltas: 96% (53/55) Resolving deltas: 98% (54/55) Resolving deltas: 100% (55/55) Resolving deltas: 100% (55/55), completed with 13 local objects. From https://github.com/python/cpython * branch main -> FETCH_HEAD Note: switching to 'bc9e63dd9d2931771415cca1b0ed774471d523c0'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at bc9e63dd9d2 gh-116738: Fix thread-safety issue in re module for free threading (gh-141923) Switched to and reset branch 'main' make: *** [Makefile:2503: buildbottest] Error 2 Test report =========== Failed tests: - test_urllib2net Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (main)
by buildbot＠python.org Nov. 26, 2025

Nov. 26, 2025

The Buildbot has detected a new failure on builder AMD64 Debian root 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/345/builds/12771 Buildbot URL: https://buildbot.python.org/ Worker for this Build: angelico-debian-amd64 Build Reason: <unknown> Blamelist: Guo Ci <zguoci(a)gmail.com>, Itamar Oren <itamarost(a)gmail.com>, Peter Bierma <zintensitydev(a)gmail.com>, Petr Viktorin <encukou(a)gmail.com>, Stan Ulbrych <89152624+StanFromIreland(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 3633, in test_framing_many_objects self.check_frame_opcodes(pickled) ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 3584, in check_frame_opcodes self.assertLessEqual(pos, frame_end) ~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ AssertionError: 257162 not less than or equal to 262184 Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_repl.py", line 346, in test_asyncio_repl_is_ok self.assertEqual(exit_code, 0, "".join(output)) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: -6 != 0 : await asyncio.sleep(0) xit() python: Python/generated_cases.c.h:12040: _PyEval_EvalFrameDefault: Assertion `oparg == 2' failed. Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/multiprocessing/process.py", line 320, in _bootstrap self.run() ~~~~~~~~^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/multiprocessing/process.py", line 108, in run self._target(*self._args, **self._kwargs) ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/concurrent/futures/process.py", line 242, in _process_worker call_item = call_queue.get(block=True) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/multiprocessing/queues.py", line 120, in get return _ForkingPickler.loads(res) ~~~~~~~~~~~~~~~~~~~~~^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_concurrent_futures/test_deadlock.py", line 7, in <module> import unittest.mock File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/mock.py", line 27, in <module> import asyncio File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/__init__.py", line 8, in <module> from .base_events import * File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/base_events.py", line 44, in <module> from . import sslproto File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/sslproto.py", line 16, in <module> from . import transports File "<frozen importlib._bootstrap>", line 1379, in _find_and_load File "<frozen importlib._bootstrap>", line 1341, in _find_and_load_unlocked File "<frozen importlib._bootstrap>", line 1267, in _find_spec File "<frozen importlib._bootstrap_external>", line 1314, in find_spec File "<frozen importlib._bootstrap_external>", line 1288, in _get_spec File "<frozen importlib._bootstrap_external>", line 1415, in find_spec File "<frozen importlib._bootstrap_external>", line 133, in _path_join AttributeError: 'tuple' object has no attribute 'rstrip' ERROR Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 3633, in test_framing_many_objects self.check_frame_opcodes(pickled) ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 3582, in check_frame_opcodes for op, arg, pos in pickletools.genops(pickled): ~~~~~~~~~~~~~~~~~~^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/pickletools.py", line 2297, in _genops assert opcode.name == 'STOP' ^^^^^^^^^^^^^^^^^^^^^ AssertionError Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_unparse.py", line 139, in check_ast_roundtrip self.assertASTEqual(ast1, ast2) ~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 46, in assertASTEqual traverse_compare(ast1, ast2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 31, in traverse_compare traverse_compare(node1, node2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 31, in traverse_compare traverse_compare(node1, node2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 31, in traverse_compare traverse_compare(node1, node2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 31, in traverse_compare traverse_compare(node1, node2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 31, in traverse_compare traverse_compare(node1, node2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 31, in traverse_compare traverse_compare(node1, node2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 27, in traverse_compare traverse_compare(value1, value2) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/support/ast_helper.py", line 16, in traverse_compare self.fail(f"{type(a)!r} is not {type(b)!r}") ~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: <class 'object'> is not <class 'str'> Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/threading.py", line 1075, in _bootstrap_inner self._context.run(self.run) ~~~~~~~~~~~~~~~~~^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/threading.py", line 1017, in run self._target(*self._args, **self._kwargs) ~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_asyncio/test_free_threading.py", line 83, in <lambda> runner = threading.Thread(target=lambda: asyncio.run(main())) ~~~~~~~~~~~^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/runners.py", line 204, in run return runner.run(main) ~~~~~~~~~~^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/runners.py", line 127, in run return self._loop.run_until_complete(task) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/base_events.py", line 719, in run_until_complete return future.result() ~~~~~~~~~~~~~^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/futures.py", line 208, in result raise self._exception.with_traceback(self._exception_tb) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/tasks.py", line 289, in __step_run_and_handle_result result = coro.send(None) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_asyncio/test_free_threading.py", line 80, in main tasks = asyncio.all_tasks(loop) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/tasks.py", line 53, in all_tasks if futures._get_loop(t) is loop and not t.done()} ~~~~~~~~~~~~~~~~~^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/futures.py", line 315, in _get_loop return get_loop() File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/asyncio/futures.py", line 132, in get_loop raise RuntimeError("Future object is not initialized.") RuntimeError: Future object is not initialized. k Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 3336, in test_dict_chunking y = self.loads(s) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_pickle.py", line 96, in loads return u.load() ~~~~~~^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/pickle.py", line 1325, in load dispatch[key[0]](self) ~~~~~~~~~~~~~~~~^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/pickle.py", line 1388, in load_int val = int(data) TypeError: int() argument must be a string, a bytes-like object or a real number, not '_Unpickler' Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_configparser.py", line 466, in test_case_sensitivity cf = self.fromstring( "[MySection]\nOption{} first line \n\tsecond line \n".format( self.delimiters[0])) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_configparser.py", line 63, in fromstring cf = self.newconfig(defaults) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_configparser.py", line 59, in newconfig instance = self.config_class(**arguments) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/configparser.py", line 658, in __init__ self._converters = ConverterMapping(self) ~~~~~~~~~~~~~~~~^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/configparser.py", line 1372, in __init__ m = self.GETTERCRE.match(getter) TypeError: expected string or bytes-like object, got 'ConverterMapping' Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 4858, in test_multiple_unpicklings_minimal self._check_multiple_unpicklings(MinimalIO, seekable=False) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 4831, in _check_multiple_unpicklings with self.subTest(proto=proto): ~~~~~~~~~~~~^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/contextlib.py", line 162, in __exit__ self.gen.throw(value) ~~~~~~~~~~~~~~^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 562, in subTest with self._outcome.testPartExecutor(self._subtest, subTest=True): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/contextlib.py", line 162, in __exit__ self.gen.throw(value) ~~~~~~~~~~~~~~^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/case.py", line 73, in testPartExecutor self.result.addSubTest(test_case.test_case, test_case, exc_info) ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/runner.py", line 94, in addSubTest super(TextTestResult, self).addSubTest(test, subtest, err) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/result.py", line 140, in addSubTest errors.append((subtest, self._exc_info_to_string(err, test))) ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/unittest/result.py", line 189, in _exc_info_to_string tb_e = traceback.TracebackException( exctype, value, tb, capture_locals=self.tb_locals, compact=True) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/traceback.py", line 1121, in __init__ suggestion = _compute_suggestion_error(exc_value, exc_traceback, wrong_name) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/traceback.py", line 1721, in _compute_suggestion_error current_distance = _levenshtein_distance(wrong_name, possible_name, max_distance) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/traceback.py", line 1786, in _levenshtein_distance insert_delete = min(result, distance) + _MOVE_COST ~~~^^^^^^^^^^^^^^^^^^ TypeError: 'int' object is not callable Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_math.py", line 1490, in test_sumprod_stress self.assertEqual( ~~~~~~~~~~~~~~~~^ run(baseline_sumprod, *args), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ run(sumprod, *args), ^^^^^^^^^^^^^^^^^^^^ args, ^^^^^ ) ^ AssertionError: Tuples differ: (None, <class 'float'>, 'nan') != (None, <class 'builtin_function_or_method'>, 'nan') Traceback (most recent call last):\n ...\n ValueError: expected ... bytes in a bytearray8, but only 6 remain\n """\n\n n = read_uint8(f)\n assert n >= 0\n if n > sys.maxsize:\n raise ValueError("bytearray8 byte count > sys.maxsize: %d" % n)\n data = f.read(n)\n if len(data) == n:\n return bytearray(data)\n raise ValueError("expected %d bytes in a bytearray8, but only %d remain" %\n (n, len(data)))\n\nbytearray8 = ArgumentDescriptor(\n name="bytearray8",\n n=TAKEN_FROM_ARGUMENT8U,\n reader=read_bytearray8,\n doc="""A counted bytearray.\n\n The first argument is an 8-byte little-endian unsigned int giving\n the number of bytes, and the second argument is that many bytes.\n """)\n\ndef read_unicodestringnl(f):\n r"""\n >>> import io\n >>> read_unicodestringnl(io.BytesIO(b"abc\\\\uabcd\\njunk")) == \'abc\\uabcd\'\n True\n " ""\n\n data = f.readline()\n if not data.endswith(b\'\\n\'):\n raise ValueError("no newline found when trying to read "\n "unicodestringnl")\n data = data[:-1] # lose the newline\n return str(data, \'raw-unicode-escape\')\n\nunicodestringnl = ArgumentDescriptor(\n name=\'unicodestringnl\',\n n=UP_TO_NEWLINE,\n reader=read_unicodestringnl,\n doc="""A newline-terminated Unicode string.\n\n This is raw-unicode-escape encoded, so consists of\n printable ASCII characters, and may contain embedded\n escape sequences.\n """)\n\n\ndef read_unicodestring1(f):\n r"""\n >>> import io\n >>> s = \'abcd\\uabcd\'\n >>> enc = s.encode(\'utf-8\')\n >>> enc\n b\'abcd\\xea\\xaf\\x8d\'\n >>> n = bytes([len(enc)]) # little-endian 1-byte length\n >>> t = read_unicodestr ing1(io.BytesIO(n + enc + b\'junk\'))\n >>> s == t\n True\n\n >>> read_unicodestring1(io.BytesIO(n + enc[:-1]))\n Traceback (most recent call last):\n ...\n ValueError: expected 7 bytes in a unicodestring1, but only 6 remain\n """\n\n n = read_uint1(f)\n assert n >= 0\n data = f.read(n)\n if len(data) == n:\n return str(data, \'utf-8\', \'surrogatepass\')\n raise ValueError("expected %d bytes in a unicodestring1, but only %d "\n "remain" % (n, len(data)))\n\nunicodestring1 = ArgumentDescriptor(\n name="unicodestring1",\n n=TAKEN_FROM_ARGUMENT1,\n reader=read_unicodestring1,\n doc="""A counted Unicode string.\n\n The first argument is a 1-byte little-endian signed int\n giving the number of bytes in the string, and the second\n argument-- the UTF-8 encoding of the Unicode string --\n contains that many bytes.\n """)\n\n\ndef read_unicodestring4(f):\n r"""\n >>> import io\n >>> s = \'abcd\\uabcd\'\n >>> enc = s.encode(\'utf-8\')\n >>> enc\n b\'abcd\\xea\\xaf\\x8d\'\n >>> n = bytes([len(enc), 0, 0, 0]) # little-endian 4-byte length\n > Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_unicodedata.py", line 48, in test_method_checksum "01"[(char + 'abc').isalpha()], ~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^ TypeError: 'int' object is not subscriptable Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_concurrent_futures/test_deadlock.py", line 167, in test_exit_during_func_exec_on_worker self._check_error(SystemExit, _exit) ~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/contextlib.py", line 85, in inner return func(*args, **kwds) File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/test_concurrent_futures/test_deadlock.py", line 132, in _check_error res.result(timeout=self.TIMEOUT) ~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/concurrent/futures/_base.py", line 450, in result return self.__get_result() ~~~~~~~~~~~~~~~~~^^ File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/concurrent/futures/_base.py", line 395, in __get_result raise self._exception concurrent.futures.process.BrokenProcessPool: A process in the process pool was terminated abruptly while the future was running or pending. Traceback (most recent call last): File "/root/buildarea/3.x.angelico-debian-amd64/build/Lib/test/pickletester.py", line 4834, in _check_multiple_unpicklings pickler = self.pickler_class(f, protocol=proto) ^^^^^^^^^^^^^^^^^^ AttributeError: 'int' object has no attribute 'pickler_class' Traceback (most recent call last):\n ...\n ValueError: no string quotes around b\'\'\n\n >>> read_stringnl(io.BytesIO(b"\\n"), stripquotes=False)\n \'\'\n\n >>> read_stringnl(io.BytesIO(b"\'\'\\n"))\n \'\'\n\n >>> read_stringnl(io.BytesIO(b\'"abcd"\'))\n Traceback (most recent call last):\n ...\n ValueError: no newline found when trying to read stringnl\n\n Embedded escapes are undone in the result.\n >>> read_stringnl(io.BytesIO(br"\'a\\n\\\\b\\x00c\\td\'" + b"\\n\'e\'"))\n \'a\\n\\\\b\\x00c\\td\'\n """\n\n data = f.readline()\n if not data.endswith(b\'\\n\'):\n raise ValueError("no newline found when trying to read stringnl")\n data = data[:-1] # lose the newline\n\n if stripquotes:\n for q in (b\'"\', b"\'"):\n if data.startswith(q):\n if not data.endswith(q):\n raise ValueError("string quote %r not found at both "\n "ends of %r" % (q, data))\n data = data[1:-1]\n break\n else:\n raise ValueError("no string quotes around %r" % data)\n\n if decode:\n data = codecs.escape_decode(data)[0].decode(encoding)\n return data\n\nstringnl = ArgumentDescriptor(\n name=\'stringnl\',\n n=UP_TO_NEWLINE,\n reader=read_stringnl,\n doc="""A newline-terminated string.\n\n This is a repr-style string, with embedded escapes, and\n bracketing quotes.\n """)\n\ndef read_stringnl_noescape(f):\n return read_stringnl(f, stripquotes=False, encoding=\'utf-8\')\n\nstringnl_noescape = ArgumentDescriptor(\n name=\'stringnl_noescape\',\n n=UP_TO_NEWLINE,\n reader=read_stringnl_noescape,\n doc="""A newline-terminated string.\n\n This is a str-style string, w ithout embedded escapes,\n or bracketing quotes. It should consist solely of\n printable ASCII characters.\n """)\n\ndef read_stringnl_noescape_pair(f):\n r"""\n >>> import io\n >>> read_stringnl_noescape_pair(io.BytesIO(b"Queue\\nEmpty\\njunk"))\n \'Queue Empty\'\n """\n\n return "%s %s" % (read_stringnl_noescape(f), read_stringnl_noescape(f))\n\nstringnl_noescape_pair = ArgumentDescriptor(\n name=\'stringnl_noescape_pair\',\n n=UP_TO_NEWLINE,\n reader=read_stringnl_noescape_pair,\n doc="""A pair of newline-terminated strings.\n\n These are str-style strings, without embedded\n escapes, or bracketing quotes. They should\n consist solely of printable ASCII characters.\n The p air is returned as a single string, with\n a single blank separating the two strings.\n """)\n\n\ndef read_string1(f):\n r"""\n >>> import io\n >>> read_string1(io.BytesIO(b"\\x00"))\n \'\'\n >>> read_string1(io.BytesIO(b"\\x03abcdef"))\n \'abc\'\n """\n\n n = read_uint1(f)\n assert n >= 0\n data = f.read(n)\n if len(data) == n:\n return data.decode("latin-1")\n raise ValueError("expected %d bytes in a string1, but only %d remain" %\n (n, len(data)))\n\nstring1 = ArgumentDescriptor(\n Traceback (most recent call last):\n ...\n ValueError: no string quotes around b\'\'\n\n >>> read_stringnl(io.BytesIO(b"\\n"), stripquotes=False)\n \'\'\n\n >>> read_stringnl(io.BytesIO(b"\'\'\\n"))\n \'\'\n\n >>> read_stringnl(io.BytesIO(b\'"abcd"\'))\n Traceback (most recent call last):\n ...\n ValueError: no newline found when trying to read stringnl\n\n Embedded escapes are undone in the result.\n >>> read_stringnl(io.BytesIO(br"\'a\\n\\\\b\\x00c\\td\'" + b"\\n\'e\'"))\n \'a\\n\\\\b\\x00c\\td\'\n """\n\n data = f.readline()\n if not data.endswith(b\'\\n\'):\n raise ValueError("no newline found when trying to read stringnl")\n data = data[:-1] # lose the newline\n\n if stripquotes:\n for q in (b\'"\', b"\'"):\n if data.startswith(q):\n if not data.endswith(q):\n raise ValueError("string quote %r not found at both "\n "ends of %r" % (q, data))\n data = data[1:-1]\n break\n else:\n raise ValueError("no string quotes around %r" % data)\n\n if decode:\n data = codecs.escape_decode(data)[0].decode(encoding)\n return data\n\nstringnl = ArgumentDescriptor(\n name=\'stringnl\',\n n=UP_TO_NEWLINE,\n reader=read_stringnl,\n doc="""A newline-terminated string.\n\n This is a repr-style string, with embedded escapes, and\n bracketing quotes.\n """)\n\ndef read_stringnl_noescape(f):\n return read_stringnl(f, stripquotes=False, encoding=\'utf-8\')\n\nstringnl_noescape = ArgumentDescriptor(\n name=\'stringnl_noescape\',\n n=UP_TO_NEWLINE,\n reader=read_stringnl_noescape,\n doc="""A newline-terminated string.\n\n This is a str-style string, w ithout embedded escapes,\n or bracketing quotes. It should consist solely of\n printable ASCII characters.\n """)\n\ndef read_stringnl_noescape_pair(f):\n r"""\n >>> import io\n >>> read_stringnl_noescape_pair(io.BytesIO(b"Queue\\nEmpty\\njunk"))\n \'Queue Empty\'\n """\n\n return "%s %s" % (read_stringnl_noescape(f), read_stringnl_noescape(f))\n\nstringnl_noescape_pair = ArgumentDescriptor(\n name=\'stringnl_noescape_pair\',\n n=UP_TO_NEWLINE,\n reader=read_stringnl_noescape_pair,\n doc="""A pair of newline-terminated strings.\n\n These are str-style strings, without embedded\n escapes, or bracketing quotes. They should\n consist solely of printable ASCII characters.\n The p air is returned as a single string, with\n a single blank separating the two strings.\n """)\n\n\ndef read_string1(f):\n r"""\n >>> import io\n >>> read_string1(io.BytesIO(b"\\x00"))\n \'\'\n >>> read_string1(io.BytesIO(b"\\x03abcdef"))\n \'abc\'\n """\n\n n = read_uint1(f)\n assert n >= 0\n data = f.read(n)\n if len(data) == n:\n return data.decode("latin-1")\n raise ValueError("expected %d bytes in a string1, but only %d remain" %\n (n, len(data)))\n\nstring1 = ArgumentDescriptor(\n Traceback (most recent call last):\n ...\n ValueError: expected ... bytes in a bytearray8, but only 6 remain\n """\n\n n = read_uint8(f)\n assert n >= 0\n if n > sys.maxsize:\n raise ValueError("bytearray8 byte count > sys.maxsize: %d" % n)\n data = f.read(n)\n if len(data) == n:\n return bytearray(data)\n raise ValueError("expected %d bytes in a bytearray8, but only %d remain" %\n (n, len(data)))\n\nbytearray8 = ArgumentDescriptor(\n name="bytearray8",\n n=TAKEN_FROM_ARGUMENT8U,\n reader=read_bytearray8,\n doc="""A counted bytearray.\n\n The first argument is an 8-byte little-endian unsigned int giving\n the number of bytes, and the second argument is that many bytes.\n """)\n\ndef read_unicodestringnl(f):\n r"""\n >>> import io\n >>> read_unicodestringnl(io.BytesIO(b"abc\\\\uabcd\\njunk")) == \'abc\\uabcd\'\n True\n " ""\n\n data = f.readline()\n if not data.endswith(b\'\\n\'):\n raise ValueError("no newline found when trying to read "\n "unicodestringnl")\n data = data[:-1] # lose the newline\n return str(data, \'raw-unicode-escape\')\n\nunicodestringnl = ArgumentDescriptor(\n name=\'unicodestringnl\',\n n=UP_TO_NEWLINE,\n reader=read_unicodestringnl,\n doc="""A newline-terminated Unicode string.\n\n This is raw-unicode-escape encoded, so consists of\n printable ASCII characters, and may contain embedded\n escape sequences.\n """)\n\n\ndef read_unicodestring1(f):\n r"""\n >>> import io\n >>> s = \'abcd\\uabcd\'\n >>> enc = s.encode(\'utf-8\')\n >>> enc\n b\'abcd\\xea\\xaf\\x8d\'\n >>> n = bytes([len(enc)]) # little-endian 1-byte length\n >>> t = read_unicodestr ing1(io.BytesIO(n + enc + b\'junk\'))\n >>> s == t\n True\n\n >>> read_unicodestring1(io.BytesIO(n + enc[:-1]))\n Traceback (most recent call last):\n ...\n ValueError: expected 7 bytes in a unicodestring1, but only 6 remain\n """\n\n n = read_uint1(f)\n assert n >= 0\n data = f.read(n)\n if len(data) == n:\n return str(data, \'utf-8\', \'surrogatepass\')\n raise ValueError("expected %d bytes in a unicodestring1, but only %d "\n "remain" % (n, len(data)))\n\nunicodestring1 = ArgumentDescriptor(\n name="unicodestring1",\n n=TAKEN_FROM_ARGUMENT1,\n reader=read_unicodestring1,\n doc="""A counted Unicode string.\n\n The first argument is a 1-byte little-endian signed int\n giving the number of bytes in the string, and the second\n argument-- the UTF-8 encoding of the Unicode string --\n contains that many bytes.\n """)\n\n\ndef read_unicodestring4(f):\n r"""\n >>> import io\n >>> s = \'abcd\\uabcd\'\n >>> enc = s.encode(\'utf-8\')\n >>> enc\n b\'abcd\\xea\\xaf\\x8d\'\n >>> n = bytes([len(enc), 0, 0, 0]) # little-endian 4-byte length\n Test report =========== Failed tests: - test.test_asyncio.test_free_threading - test_configparser - test.test_concurrent_futures.test_deadlock - test_unparse - test_math - test_repl - test_pickle - test_codecs - test_unicodedata - test_pow - test_tokenize Failed subtests: - test_method_checksum - test.test_unicodedata.UnicodeMethodsTest.test_method_checksum - test_multiple_unpicklings_minimal - test.test_pickle.CPicklerUnpicklerObjectTests.test_multiple_unpicklings_minimal - test_case_sensitivity - test.test_configparser.ConfigParserTestCaseNonStandardDefaultSection.test_case_sensitivity - test_asyncio_repl_is_ok - test.test_repl.TestInteractiveInterpreter.test_asyncio_repl_is_ok - test_framing_many_objects - test.test_pickle.CDumpPickle_LoadPickle.test_framing_many_objects - test_sumprod_stress - test.test_math.MathTests.test_sumprod_stress - test_exit_during_func_exec_on_worker - test.test_concurrent_futures.test_deadlock.ProcessPoolSpawnExecutorDeadlockTest.test_exit_during_func_exec_on_worker - test_dict_chunking - test.test_pickle.CDumpPickle_LoadPickle.test_dict_chunking - test_framing_many_objects - test.test_pickle.CPicklerTests.test_framing_many_objects - test_files - test.test_unparse.DirectoryTestCase.test_files Sincerely, -The Buildbot

1 0

☠ Buildbot (Python): python/cpython - failed test (failure) (3.13)
by buildbot＠python.org Nov. 25, 2025

Nov. 25, 2025

The Buildbot has detected a new failure on builder ARM64 MacOS M1 Refleaks NoGIL 3.13 while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1396/builds/1812 Buildbot URL: https://buildbot.python.org/ Worker for this Build: itamaro-macos-arm64-aws Build Reason: <unknown> Blamelist: Alexander Nordin <alexander.f.nordin(a)gmail.com>, Miss Islington (bot) <31488909+miss-islington(a)users.noreply.github.com> BUILD FAILED: failed test (failure) Summary of the results of the build (if available): =================================================== == Captured traceback ================== Traceback (most recent call last): File "/Users/buildbot/buildarea/3.13.itamaro-macos-arm64-aws.macos-with-brew.refleak.nogil/build/Lib/test/_test_multiprocessing.py", line 1492, in test_repr_rlock self.assertEqual('<RLock(SomeOtherThread, nonzero)>', repr(lock)) ~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ AssertionError: '<RLock(SomeOtherThread, nonzero)>' != '<RLock(None, 0)>' - <RLock(SomeOtherThread, nonzero)> + <RLock(None, 0)> Test report =========== Failed tests: - test.test_multiprocessing_forkserver.test_processes Failed subtests: - test_repr_rlock - test.test_multiprocessing_forkserver.test_processes.WithProcessesTestLock.test_repr_rlock Sincerely, -The Buildbot

1 0