The Buildbot has detected a new failure on builder s390x Fedora Clang 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1151/builds/292

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-fedora-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 11 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING:

Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information.

make: *** [Makefile:2013: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1190/builds/290

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-fedora-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 11 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

make: *** [Makefile:2013: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Windows11 Non-Debug 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1115/builds/277

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: ware-win11

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

Could Not Find b:\uildarea\3.12.ware-win11.nondebug\build\Lib\*.pyc The system cannot find the file specified. Could Not Find b:\uildarea\3.12.ware-win11.nondebug\build\PCbuild\python*.zip

Could Not Find b:\uildarea\3.12.ware-win11.nondebug\build\PCbuild\python*.zip

Test report

Failed tests:

• test.test_concurrent_futures.test_deadlock

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux Usan 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1172/builds/327

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: pablogsal-arch-x86_64

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 41805, 0, 0): cannot assign requested address

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.clang-ubsan/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 44061, 0, 0): cannot assign requested address

Test report

Failed tests:

• test.test_asyncio.test_streams

Failed subtests:

• test_unhandled_exceptions - test.test_asyncio.test_streams.StreamTests.test_unhandled_exceptions

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1197/builds/323

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: pablogsal-arch-x86_64

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 34845, 0, 0): cannot assign requested address

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 49013, 0, 0): cannot assign requested address

Test report

Failed tests:

• test.test_asyncio.test_streams

Failed subtests:

• test_unhandled_exceptions - test.test_asyncio.test_streams.StreamTests.test_unhandled_exceptions

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux Asan Debug 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1120/builds/320

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: pablogsal-arch-x86_64

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 42707, 0, 0): cannot assign requested address

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan_debug/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 45665, 0, 0): cannot assign requested address

Test report

Failed tests:

• test.test_asyncio.test_streams

Failed subtests:

• test_unhandled_exceptions - test.test_asyncio.test_streams.StreamTests.test_unhandled_exceptions

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux Asan 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1108/builds/321

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: pablogsal-arch-x86_64

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 32893, 0, 0): cannot assign requested address

Traceback (most recent call last): File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/test/test_asyncio/test_streams.py", line 1101, in test_unhandled_exceptions self.loop.run_until_complete(main()) File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/asyncio/base_events.py", line 684, in run_until_complete return future.result() ^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/test/test_asyncio/test_streams.py", line 1094, in main server = await asyncio.start_server( ^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/asyncio/streams.py", line 83, in start_server return await loop.create_server(factory, host, port, **kwds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/buildbot/buildarea/3.12.pablogsal-arch-x86_64.asan/build/Lib/asyncio/base_events.py", line 1559, in create_server raise OSError(err.errno, 'error while attempting ' OSError: [Errno 99] error while attempting to bind on address ('::1', 55293, 0, 0): cannot assign requested address

Test report

Failed tests:

• test.test_asyncio.test_streams

Failed subtests:

• test_unhandled_exceptions - test.test_asyncio.test_streams.StreamTests.test_unhandled_exceptions

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Ubuntu Shared 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1118/builds/427

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: bolen-ubuntu

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly.

make: *** [Makefile:2013: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1194/builds/375

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: cstratak-RHEL8-x86_64

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

make: *** [Makefile:2017: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder x86-64 macOS 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1185/builds/380

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: billenstein-macos

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly.

/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ranlib: file: libpython3.12d.a(dynamic_annotations.o) has no symbols /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/ranlib: file: libpython3.12d.a(pymath.o) has no symbols ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups ld: warning: -undefined dynamic_lookup may not work with chained fixups

make: *** [buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1112/builds/352

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-rhel8-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

make: *** [Makefile:2015: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1208/builds/349

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-rhel8-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2817: clean-retain-profile] Error 1 (ignored)

make: *** [Makefile:2015: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL8 LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1168/builds/391

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: cstratak-RHEL8-x86_64

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2819: clean-retain-profile] Error 1 (ignored) Python/assemble.c: In function ‘_PyAssemble_MakeCodeObject’: Python/assemble.c:130:9: warning: ‘handler.h_startdepth’ may be used uninitialized in this function [-Wmaybe-uninitialized] int depth = handler->h_startdepth - 1; ^~~~~ Python/assemble.c:147:34: note: ‘handler.h_startdepth’ was declared here _PyCompile_ExceptHandlerInfo handler; ^~~~~~~

make: *** [Makefile:2017: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1111/builds/348

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-rhel8-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

make: *** [Makefile:2015: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL7 LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1155/builds/386

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-rhel-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done. remote: Counting objects: 8% (1/12) remote: Counting objects: 16% (2/12) remote: Counting objects: 25% (3/12) remote: Counting objects: 33% (4/12) remote: Counting objects: 41% (5/12) remote: Counting objects: 50% (6/12) remote: Counting objects: 58% (7/12) remote: Counting objects: 66% (8/12) remote: Counting objects: 75% (9/12) remote: Counting objects: 83% (10/12) remote: Counting objects: 91% (11/12) remote: Counting objects: 100% (12/12) remote: Counting objects: 100% (12/12), done. remote: Compressing objects: 14% (1/7) remote: Compressing objects: 28% (2/7) remote: Compressing objects: 42% (3/7) remote: Compressing objects: 57% (4/7) remote: Compressing objects: 71% (5/7) remote: Compressing objects: 85% (6/7) remote: Compressing objects: 100% (7/7) remote: Compressing objects: 100% (7/7), done. remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1 From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: checking out '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 9aa8829... [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [clean-retain-profile] Error 1 (ignored) Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1436:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1436:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1437:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1437:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Objects/bytes_methods.c: In function ‘find_internal’: Objects/bytes_methods.c:527:31: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (PyObject_GetBuffer(subobj, &subbuf, PyBUF_SIMPLE) != 0) ^ Objects/bytes_methods.c: In function ‘_Py_bytes_find’: Objects/bytes_methods.c:527:31: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] Objects/bytes_methods.c:514:15: note: ‘subobj’ was declared here PyObject *subobj; ^ Objects/bytes_methods.c: In function ‘_Py_bytes_rfind’: Objects/bytes_methods.c:527:31: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (PyObject_GetBuffer(subobj, &subbuf, PyBUF_SIMPLE) != 0) ^ Objects/bytes_methods.c:514:15: note: ‘subobj’ was declared here PyObject *subobj; ^ Objects/bytes_methods.c: In function ‘_Py_bytes_count’: Objects/bytes_methods.c:676:31: warning: ‘sub_obj’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (PyObject_GetBuffer(sub_obj, &vsub, PyBUF_SIMPLE) != 0) ^ Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1436:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1436:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1437:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1437:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/pytime.c: In function ‘pytime_mul’: Python/pytime.c:1382:1: note: correcting inconsistent profile data } ^ ./Modules/_io/clinic/fileio.c.h: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:171:32: warning: ‘exc’ may be used uninitialized in this function [-Wmaybe-uninitialized] _PyErr_ChainExceptions1(exc); ^ ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here PyObject *exc; ^ ./Modules/_io/clinic/textio.c.h: In function ‘_io_TextIOWrapper_seek’: ./Modules/_io/textio.c:2617:45: warning: ‘MEM[(char * {ref-all})&cookie + 20B]’ may be used uninitialized in this function [-Wmaybe-uninitialized] decoded = PyObject_CallMethodObjArgs(self->decoder, &_Py_ID(decode), ^ ./Modules/_io/textio.c:2466:17: note: ‘MEM[(char * {ref-all})&cookie + 20B]’ was declared here cookie_type cookie; ^ ./Modules/_io/textio.c:2626:54: warning: ‘MEM[(char * {ref-all})&cookie + 16B]’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (PyUnicode_GetLength(self->decoded_chars) < cookie.chars_to_skip) { ^ ./Modules/_io/textio.c:2466:17: note: ‘MEM[(char * {ref-all})&cookie + 16B]’ was declared here cookie_type cookie; ^ ./Modules/_io/textio.c:2434:40: warning: ‘MEM[(char * {ref-all})&cookie + 8B]’ may be used uninitialized in this function [-Wmaybe-uninitialized] return _textiowrapper_encoder_reset( ^ ./Modules/_io/textio.c:2466:17: note: ‘MEM[(char * {ref-all})&cookie + 8B]’ was declared here cookie_type cookie; ^ ./Modules/_io/textio.c:2434:40: warning: ‘MEM[(char * {ref-all})&cookie]’ may be used uninitialized in this function [-Wmaybe-uninitialized] return _textiowrapper_encoder_reset( ^ ./Modules/_io/textio.c:2466:17: note: ‘MEM[(char * {ref-all})&cookie]’ was declared here cookie_type cookie; ^

make: *** [buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Debian PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1096/builds/489

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: gps-debian-profile-opt

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2819: clean-retain-profile] Error 1 (ignored) ./Modules/readline.c:1018:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes] 1018 | on_startup_hook() | ^~~~~~~~~~~~~~~ ./Modules/readline.c:1033:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes] 1033 | on_pre_input_hook() | ^~~~~~~~~~~~~~~~~ ./Modules/socketmodule.c: In function ‘getsockaddrarg’: ./Modules/socketmodule.c:2471:9: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation] 2471 | strncpy((char *)sa->salg_name, name, sizeof(sa->salg_name)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/readline.c:1018:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes] 1018 | on_startup_hook() | ^~~~~~~~~~~~~~~ ./Modules/readline.c:1033:1: warning: function declaration isn’t a prototype [-Wstrict-prototypes] 1033 | on_pre_input_hook() | ^~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute.part.0’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

make: *** [Makefile:2017: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder ARM64 macOS 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1206/builds/501

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: pablogsal-macos-m1

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

./Modules/readline.c:1018:16: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] on_startup_hook() ^ void ./Modules/readline.c:1033:18: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] on_pre_input_hook() ^ void 2 warnings generated. In file included from ./Modules/tkappinit.c:17: In file included from /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/tk.h:99: /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:131:21: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*free_private)(); /* called to free private storage */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:334:33: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] struct _XImage *(*create_image)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:453:23: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] XID (*resource_alloc)(); /* allocator function */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:471:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*synchandler)(); /* Synchronization handler */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:496:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (*event_vec[128])(); /* vector for wire to event */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:497:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Status (*wire_vec[128])(); /* vector for event to wire */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:509:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (**error_vec)(); /* vector for wire to error */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:522:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*savedsynchandler)(); /* user synchandler when Xlib usurps */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:1053:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] typedef void (*XIMProc)(); ^ void In file included from ./Modules/_tkinter.c:54: In file included from /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/tk.h:99: /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:131:21: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*free_private)(); /* called to free private storage */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:334:33: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] struct _XImage *(*create_image)(); ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:453:23: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] XID (*resource_alloc)(); /* allocator function */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:471:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*synchandler)(); /* Synchronization handler */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:496:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (*event_vec[128])(); /* vector for wire to event */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:497:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Status (*wire_vec[128])(); /* vector for event to wire */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:509:20: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] Bool (**error_vec)(); /* vector for wire to error */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:522:25: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] int (*savedsynchandler)(); /* user synchandler when Xlib usurps */ ^ void /opt/homebrew/Cellar/tcl-tk/8.6.13_5/include/tcl-tk/X11/Xlib.h:1053:24: warning: a function declaration without a prototype is deprecated in all versions of C [-Wstrict-prototypes] typedef void (*XIMProc)(); ^ void 9 warnings generated. 9 warnings generated.

make: *** [buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Debian 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1183/builds/516

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-debian-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

make: *** [Makefile:2015: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 FreeBSD 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1220/builds/184

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: ware-freebsd

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL7 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1184/builds/382

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-rhel-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done. remote: Counting objects: 8% (1/12) remote: Counting objects: 16% (2/12) remote: Counting objects: 25% (3/12) remote: Counting objects: 33% (4/12) remote: Counting objects: 41% (5/12) remote: Counting objects: 50% (6/12) remote: Counting objects: 58% (7/12) remote: Counting objects: 66% (8/12) remote: Counting objects: 75% (9/12) remote: Counting objects: 83% (10/12) remote: Counting objects: 91% (11/12) remote: Counting objects: 100% (12/12) remote: Counting objects: 100% (12/12), done. remote: Compressing objects: 14% (1/7) remote: Compressing objects: 28% (2/7) remote: Compressing objects: 42% (3/7) remote: Compressing objects: 57% (4/7) remote: Compressing objects: 71% (5/7) remote: Compressing objects: 85% (6/7) remote: Compressing objects: 100% (7/7) remote: Compressing objects: 100% (7/7), done. remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1 From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: checking out '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 9aa8829... [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

Objects/unicodeobject.c: In function ‘unicode_endswith’: Objects/unicodeobject.c:12897:23: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] substring = PyTuple_GET_ITEM(subobj, i); ^ Objects/unicodeobject.c: In function ‘unicode_startswith’: Objects/unicodeobject.c:12843:23: warning: ‘subobj’ may be used uninitialized in this function [-Wmaybe-uninitialized] substring = PyTuple_GET_ITEM(subobj, i); ^ In file included from ./Include/internal/pycore_opcode.h:13:0, from Python/ceval.c:16: Python/ceval.c: In function ‘lltrace_instruction’: Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:266:33: note: in definition of macro ‘IS_PSEUDO_OPCODE’ #define IS_PSEUDO_OPCODE(op) (((op) >= MIN_PSEUDO_OPCODE) && ((op) <= MAX_PSEUDO_OPCODE)) ^ Python/ceval.c:141:9: note: in expansion of macro ‘HAS_ARG’ if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:221:10: note: in definition of macro ‘HAS_ARG’ || ((op) == JUMP)
^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:222:10: note: in definition of macro ‘HAS_ARG’ || ((op) == JUMP_NO_INTERRUPT)
^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:223:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_METHOD)
^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:224:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_SUPER_METHOD)
^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:225:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_ZERO_SUPER_METHOD)
^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:226:10: note: in definition of macro ‘HAS_ARG’ || ((op) == LOAD_ZERO_SUPER_ATTR)
^ Python/ceval.c:141:17: warning: comparison is always false due to limited range of data type [-Wtype-limits] if (HAS_ARG((int)_PyOpcode_Deopt[opcode])) { ^ ./Include/opcode.h:227:10: note: in definition of macro ‘HAS_ARG’ || ((op) == STORE_FAST_MAYBE_NULL)
^ Python/instrumentation.c: In function ‘allocate_instrumentation_data’: Python/instrumentation.c:1436:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->local_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1436:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces] Python/instrumentation.c:1437:9: warning: missing braces around initializer [-Wmissing-braces] code->_co_monitoring->active_monitors = (_Py_LocalMonitors){ 0 }; ^ Python/instrumentation.c:1437:9: warning: (near initialization for ‘(anonymous).tools’) [-Wmissing-braces]

make: *** [buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder x86 Debian Non-Debug with X 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1254/builds/99

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: ware-debian-x86

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

configure: WARNING: i686-pc-linux-gnu/gcc is not supported configure: WARNING:

Platform "i686-pc-linux-gnu" with compiler "gcc" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information.

In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘exp_to_string’ at ./Modules/_decimal/libmpdec/io.c:393:12, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:631:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:365:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:501:22: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro ‘EXTRACT_DIGIT’ 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^~~~~~~~~~~~~ ./Modules/_testcapi/heaptype_relative.c: In function ‘make_sized_heaptypes’: ./Modules/_testcapi/heaptype_relative.c:62:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 62 | (unsigned long long)data_ptr, | ^

make: *** [Makefile:2017: buildbottest] Error 3

Test report

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x SLES 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1129/builds/518

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-sles-z

Build Reason: <unknown> Blamelist: Kumar Aditya <kumaraditya@python.org>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 13, done.
remote: Counting objects: 8% (1/12)
remote: Counting objects: 16% (2/12)
remote: Counting objects: 25% (3/12)
remote: Counting objects: 33% (4/12)
remote: Counting objects: 41% (5/12)
remote: Counting objects: 50% (6/12)
remote: Counting objects: 58% (7/12)
remote: Counting objects: 66% (8/12)
remote: Counting objects: 75% (9/12)
remote: Counting objects: 83% (10/12)
remote: Counting objects: 91% (11/12)
remote: Counting objects: 100% (12/12)
remote: Counting objects: 100% (12/12), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 13 (delta 5), reused 10 (delta 5), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to '9aa88290d82e2808eed84e7a63d0bf9623f84f53'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 9aa88290d8 [3.12] GH-110894: Call loop exception handler for exceptions in client_connected_cb (GH-111601) (#111632) Switched to and reset branch '3.12'

make: *** [Makefile:2010: buildbottest] Error 3

Test report

Sincerely, -The Buildbot