☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (3.12)
The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1179/builds/22
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-z
Build Reason: <unknown> Blamelist: Dong-hee Na <donghee.na@python.org>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Itamar Ostricher <itamarost@gmail.com>, Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>, Ned Deily <nad@python.org>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Petr Viktorin <encukou@gmail.com>, Terry Jan Reedy <tjreedy@udel.edu>, Thomas Wouters <thomas@python.org>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 18, done.
remote: Counting objects: 6% (1/16)
remote: Counting objects: 12% (2/16)
remote: Counting objects: 18% (3/16)
remote: Counting objects: 25% (4/16)
remote: Counting objects: 31% (5/16)
remote: Counting objects: 37% (6/16)
remote: Counting objects: 43% (7/16)
remote: Counting objects: 50% (8/16)
remote: Counting objects: 56% (9/16)
remote: Counting objects: 62% (10/16)
remote: Counting objects: 68% (11/16)
remote: Counting objects: 75% (12/16)
remote: Counting objects: 81% (13/16)
remote: Counting objects: 87% (14/16)
remote: Counting objects: 93% (15/16)
remote: Counting objects: 100% (16/16)
remote: Counting objects: 100% (16/16), done.
remote: Compressing objects: 16% (1/6)
remote: Compressing objects: 33% (2/6)
remote: Compressing objects: 50% (3/6)
remote: Compressing objects: 66% (4/6)
remote: Compressing objects: 83% (5/6)
remote: Compressing objects: 100% (6/6)
remote: Compressing objects: 100% (6/6), done.
remote: Total 18 (delta 10), reused 12 (delta 10), pack-reused 2
From https://github.com/python/cpython
- branch 3.12 -> FETCH_HEAD Note: switching to '635ce29257a7f7272af009d3c08379522317d89b'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 635ce29257 gh-104803: Implement ntpath.isdevdrive for checking whether a path is on a Windows Dev Drive (GH-104805) Switched to and reset branch '3.12'
find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2800: clean-retain-profile] Error 1 (ignored) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^
Timeout (0:15:00)! Thread 0x000003ff9f6f7080 (most recent call first): File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2011: buildbottest] Error 1
Cannot open file '/home/dje/cpython-buildarea/3.12.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload
Test report
Failed tests:
- test_tools
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Debian root 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1102/builds/35
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: angelico-debian-amd64
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 18, done.
remote: Counting objects: 6% (1/16)
remote: Counting objects: 12% (2/16)
remote: Counting objects: 18% (3/16)
remote: Counting objects: 25% (4/16)
remote: Counting objects: 31% (5/16)
remote: Counting objects: 37% (6/16)
remote: Counting objects: 43% (7/16)
remote: Counting objects: 50% (8/16)
remote: Counting objects: 56% (9/16)
remote: Counting objects: 62% (10/16)
remote: Counting objects: 68% (11/16)
remote: Counting objects: 75% (12/16)
remote: Counting objects: 81% (13/16)
remote: Counting objects: 87% (14/16)
remote: Counting objects: 93% (15/16)
remote: Counting objects: 100% (16/16)
remote: Counting objects: 100% (16/16), done.
remote: Compressing objects: 20% (1/5)
remote: Compressing objects: 40% (2/5)
remote: Compressing objects: 60% (3/5)
remote: Compressing objects: 80% (4/5)
remote: Compressing objects: 100% (5/5)
remote: Compressing objects: 100% (5/5), done.
remote: Total 18 (delta 11), reused 12 (delta 11), pack-reused 2
From https://github.com/python/cpython
- branch 3.12 -> FETCH_HEAD Note: switching to '635ce29257a7f7272af009d3c08379522317d89b'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 635ce29257 gh-104803: Implement ntpath.isdevdrive for checking whether a path is on a Windows Dev Drive (GH-104805) Switched to and reset branch '3.12'
configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly.
Fatal Python error: drop_gil: PyMUTEX_LOCK(gil->switch_mutex) failed Python runtime state: initialized
Thread 0x00007fdebbbbb280 (most recent call first): File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 80 in clean_up_interpreters File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 88 in tearDown File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/case.py", line 594 in _callTearDown File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/case.py", line 637 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/case.py", line 690 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/runner.py", line 240 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 738 in main File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 802 in main File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/__main__.py", line 2 in <module> File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/runpy.py", line 88 in _run_code File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/runpy.py", line 198 in _run_module_as_main Fatal Python error: Aborted
Thread 0x00007fdebbbbb280 (most recent call first): File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 80 in clean_up_interpreters File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/test__xxsubinterpreters.py", line 88 in tearDown File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/case.py", line 594 in _callTearDown File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/case.py", line 637 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/case.py", line 690 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 122 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/suite.py", line 84 in __call__ File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/unittest/runner.py", line 240 in run File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 738 in main File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/libregrtest/main.py", line 802 in main File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/test/__main__.py", line 2 in <module> File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/runpy.py", line 88 in _run_code File "/root/buildarea/3.12.angelico-debian-amd64/build/Lib/runpy.py", line 198 in _run_module_as_main
Extension modules: _testcapi, _xxsubinterpreters (total: 2) Aborted make: *** [Makefile:2009: buildbottest] Error 134
Cannot open file '/root/buildarea/3.12.angelico-debian-amd64/build/test-results.xml' for upload
Test report
Failed tests:
- test__xxsubinterpreters
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora Rawhide LTO + PGO 3.12 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1182/builds/32
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-fedora-rawhide-ppc64le
Build Reason: <unknown> Blamelist: Dong-hee Na <donghee.na@python.org>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Itamar Ostricher <itamarost@gmail.com>, Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>, Ned Deily <nad@python.org>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Petr Viktorin <encukou@gmail.com>, Terry Jan Reedy <tjreedy@udel.edu>, Thomas Wouters <thomas@python.org>
BUILD FAILED: failed configure (failure) clean (failure)
Summary of the results of the build (if available):
Captured traceback
remote: Enumerating objects: 234, done.
remote: Counting objects: 0% (1/229)
remote: Counting objects: 1% (3/229)
remote: Counting objects: 2% (5/229)
remote: Counting objects: 3% (7/229)
remote: Counting objects: 4% (10/229)
remote: Counting objects: 5% (12/229)
remote: Counting objects: 6% (14/229)
remote: Counting objects: 7% (17/229)
remote: Counting objects: 8% (19/229)
remote: Counting objects: 9% (21/229)
remote: Counting objects: 10% (23/229)
remote: Counting objects: 11% (26/229)
remote: Counting objects: 12% (28/229)
remote: Counting objects: 13% (30/229)
remote: Counting objects: 14% (33/229)
remote: Counting objects: 15% (35/229)
remote: Counting objects: 16% (37/229)
remote: Counting objects: 17% (39/229)
remote: Counting objects: 18% (42/229)
remote: Counting objects: 19% (44/229)
remote: Counting objects: 20% (46/229)
remote: Counting objects: 21% (49/229)
remote: Counting objects: 22% (51/229)
remote: Counting objects: 23% (53/229)
remote: Counting objects: 24% (55/229)
remote: Counting objects: 25% (58/229)
remote: Counting objects: 26% (60/229)
remote: Counting objects: 27% (62/229)
remote: Counting objects: 28% (65/229)
remote: Counting objects: 29% (67/229)
remote: Counting objects: 30% (69/229)
remote: Counting objects: 31% (71/229)
remote: Counting objects: 32% (74/229)
remote: Counting objects: 33% (76/229)
remote: Counting objects: 34% (78/229)
remote: Counting objects: 35% (81/229)
remote: Counting objects: 36% (83/229)
remote: Counting objects: 37% (85/229)
remote: Counting objects: 38% (88/229)
remote: Counting objects: 39% (90/229)
remote: Counting objects: 40% (92/229)
remote: Counting objects: 41% (94/229)
remote: Counting objects: 42% (97/229)
remote: Counting objects: 43% (99/229)
remote: Counting objects: 44% (101/229)
remote: Counting objects: 45% (104/229)
remote: Counting objects: 46% (106/229)
remote: Counting objects: 47% (108/229)
remote: Counting objects: 48% (110/229)
remote: Counting objects: 49% (113/229)
remote: Counting objects: 50% (115/229)
remote: Counting objects: 51% (117/229)
remote: Counting objects: 52% (120/229)
remote: Counting objects: 53% (122/229)
remote: Counting objects: 54% (124/229)
remote: Counting objects: 55% (126/229)
remote: Counting objects: 56% (129/229)
remote: Counting objects: 57% (131/229)
remote: Counting objects: 58% (133/229)
remote: Counting objects: 59% (136/229)
remote: Counting objects: 60% (138/229)
remote: Counting objects: 61% (140/229)
remote: Counting objects: 62% (142/229)
remote: Counting objects: 63% (145/229)
remote: Counting objects: 64% (147/229)
remote: Counting objects: 65% (149/229)
remote: Counting objects: 66% (152/229)
remote: Counting objects: 67% (154/229)
remote: Counting objects: 68% (156/229)
remote: Counting objects: 69% (159/229)
remote: Counting objects: 70% (161/229)
remote: Counting objects: 71% (163/229)
remote: Counting objects: 72% (165/229)
remote: Counting objects: 73% (168/229)
remote: Counting objects: 74% (170/229)
remote: Counting objects: 75% (172/229)
remote: Counting objects: 76% (175/229)
remote: Counting objects: 77% (177/229)
remote: Counting objects: 78% (179/229)
remote: Counting objects: 79% (181/229)
remote: Counting objects: 80% (184/229)
remote: Counting objects: 81% (186/229)
remote: Counting objects: 82% (188/229)
remote: Counting objects: 83% (191/229)
remote: Counting objects: 84% (193/229)
remote: Counting objects: 85% (195/229)
remote: Counting objects: 86% (197/229)
remote: Counting objects: 87% (200/229)
remote: Counting objects: 88% (202/229)
remote: Counting objects: 89% (204/229)
remote: Counting objects: 90% (207/229)
remote: Counting objects: 91% (209/229)
remote: Counting objects: 92% (211/229)
remote: Counting objects: 93% (213/229)
remote: Counting objects: 94% (216/229)
remote: Counting objects: 95% (218/229)
remote: Counting objects: 96% (220/229)
remote: Counting objects: 97% (223/229)
remote: Counting objects: 98% (225/229)
remote: Counting objects: 99% (227/229)
remote: Counting objects: 100% (229/229)
remote: Counting objects: 100% (229/229), done.
remote: Compressing objects: 0% (1/118)
remote: Compressing objects: 1% (2/118)
remote: Compressing objects: 2% (3/118)
remote: Compressing objects: 3% (4/118)
remote: Compressing objects: 4% (5/118)
remote: Compressing objects: 5% (6/118)
remote: Compressing objects: 6% (8/118)
remote: Compressing objects: 7% (9/118)
remote: Compressing objects: 8% (10/118)
remote: Compressing objects: 9% (11/118)
remote: Compressing objects: 10% (12/118)
remote: Compressing objects: 11% (13/118)
remote: Compressing objects: 12% (15/118)
remote: Compressing objects: 13% (16/118)
remote: Compressing objects: 14% (17/118)
remote: Compressing objects: 15% (18/118)
remote: Compressing objects: 16% (19/118)
remote: Compressing objects: 17% (21/118)
remote: Compressing objects: 18% (22/118)
remote: Compressing objects: 19% (23/118)
remote: Compressing objects: 20% (24/118)
remote: Compressing objects: 21% (25/118)
remote: Compressing objects: 22% (26/118)
remote: Compressing objects: 23% (28/118)
remote: Compressing objects: 24% (29/118)
remote: Compressing objects: 25% (30/118)
remote: Compressing objects: 26% (31/118)
remote: Compressing objects: 27% (32/118)
remote: Compressing objects: 28% (34/118)
remote: Compressing objects: 29% (35/118)
remote: Compressing objects: 30% (36/118)
remote: Compressing objects: 31% (37/118)
remote: Compressing objects: 32% (38/118)
remote: Compressing objects: 33% (39/118)
remote: Compressing objects: 34% (41/118)
remote: Compressing objects: 35% (42/118)
remote: Compressing objects: 36% (43/118)
remote: Compressing objects: 37% (44/118)
remote: Compressing objects: 38% (45/118)
remote: Compressing objects: 39% (47/118)
remote: Compressing objects: 40% (48/118)
remote: Compressing objects: 41% (49/118)
remote: Compressing objects: 42% (50/118)
remote: Compressing objects: 43% (51/118)
remote: Compressing objects: 44% (52/118)
remote: Compressing objects: 45% (54/118)
remote: Compressing objects: 46% (55/118)
remote: Compressing objects: 47% (56/118)
remote: Compressing objects: 48% (57/118)
remote: Compressing objects: 49% (58/118)
remote: Compressing objects: 50% (59/118)
remote: Compressing objects: 51% (61/118)
remote: Compressing objects: 52% (62/118)
remote: Compressing objects: 53% (63/118)
remote: Compressing objects: 54% (64/118)
remote: Compressing objects: 55% (65/118)
remote: Compressing objects: 56% (67/118)
remote: Compressing objects: 57% (68/118)
remote: Compressing objects: 58% (69/118)
remote: Compressing objects: 59% (70/118)
remote: Compressing objects: 60% (71/118)
remote: Compressing objects: 61% (72/118)
remote: Compressing objects: 62% (74/118)
remote: Compressing objects: 63% (75/118)
remote: Compressing objects: 64% (76/118)
remote: Compressing objects: 65% (77/118)
remote: Compressing objects: 66% (78/118)
remote: Compressing objects: 67% (80/118)
remote: Compressing objects: 68% (81/118)
remote: Compressing objects: 69% (82/118)
remote: Compressing objects: 70% (83/118)
remote: Compressing objects: 71% (84/118)
remote: Compressing objects: 72% (85/118)
remote: Compressing objects: 73% (87/118)
remote: Compressing objects: 74% (88/118)
remote: Compressing objects: 75% (89/118)
remote: Compressing objects: 76% (90/118)
remote: Compressing objects: 77% (91/118)
remote: Compressing objects: 78% (93/118)
remote: Compressing objects: 79% (94/118)
remote: Compressing objects: 80% (95/118)
remote: Compressing objects: 81% (96/118)
remote: Compressing objects: 82% (97/118)
remote: Compressing objects: 83% (98/118)
remote: Compressing objects: 84% (100/118)
remote: Compressing objects: 85% (101/118)
remote: Compressing objects: 86% (102/118)
remote: Compressing objects: 87% (103/118)
remote: Compressing objects: 88% (104/118)
remote: Compressing objects: 89% (106/118)
remote: Compressing objects: 90% (107/118)
remote: Compressing objects: 91% (108/118)
remote: Compressing objects: 92% (109/118)
remote: Compressing objects: 93% (110/118)
remote: Compressing objects: 94% (111/118)
remote: Compressing objects: 95% (113/118)
remote: Compressing objects: 96% (114/118)
remote: Compressing objects: 97% (115/118)
remote: Compressing objects: 98% (116/118)
remote: Compressing objects: 99% (117/118)
remote: Compressing objects: 100% (118/118)
remote: Compressing objects: 100% (118/118), done.
Receiving objects: 0% (1/234)
Receiving objects: 1% (3/234)
Receiving objects: 2% (5/234)
Receiving objects: 3% (8/234)
Receiving objects: 4% (10/234)
Receiving objects: 5% (12/234)
Receiving objects: 6% (15/234)
Receiving objects: 7% (17/234)
Receiving objects: 8% (19/234)
Receiving objects: 9% (22/234)
Receiving objects: 10% (24/234)
Receiving objects: 11% (26/234)
Receiving objects: 12% (29/234)
Receiving objects: 13% (31/234)
Receiving objects: 14% (33/234)
Receiving objects: 15% (36/234)
Receiving objects: 16% (38/234)
Receiving objects: 17% (40/234)
Receiving objects: 18% (43/234)
Receiving objects: 19% (45/234)
Receiving objects: 20% (47/234)
Receiving objects: 21% (50/234)
Receiving objects: 22% (52/234)
Receiving objects: 23% (54/234)
Receiving objects: 24% (57/234)
Receiving objects: 25% (59/234)
Receiving objects: 26% (61/234)
Receiving objects: 27% (64/234)
Receiving objects: 28% (66/234)
Receiving objects: 29% (68/234)
Receiving objects: 30% (71/234)
Receiving objects: 31% (73/234)
Receiving objects: 32% (75/234)
Receiving objects: 33% (78/234)
Receiving objects: 34% (80/234)
Receiving objects: 35% (82/234)
Receiving objects: 36% (85/234)
Receiving objects: 37% (87/234)
Receiving objects: 38% (89/234)
Receiving objects: 39% (92/234)
Receiving objects: 40% (94/234)
Receiving objects: 41% (96/234)
Receiving objects: 42% (99/234)
Receiving objects: 43% (101/234)
Receiving objects: 44% (103/234)
Receiving objects: 45% (106/234)
Receiving objects: 46% (108/234)
Receiving objects: 47% (110/234)
Receiving objects: 48% (113/234)
Receiving objects: 49% (115/234)
Receiving objects: 50% (117/234)
Receiving objects: 51% (120/234)
Receiving objects: 52% (122/234)
Receiving objects: 53% (125/234)
Receiving objects: 54% (127/234)
Receiving objects: 55% (129/234)
Receiving objects: 56% (132/234)
Receiving objects: 57% (134/234)
Receiving objects: 58% (136/234)
Receiving objects: 59% (139/234)
Receiving objects: 60% (141/234)
Receiving objects: 61% (143/234)
Receiving objects: 62% (146/234)
Receiving objects: 63% (148/234)
Receiving objects: 64% (150/234)
Receiving objects: 65% (153/234)
Receiving objects: 66% (155/234)
Receiving objects: 67% (157/234)
Receiving objects: 68% (160/234)
Receiving objects: 69% (162/234)
Receiving objects: 70% (164/234)
Receiving objects: 71% (167/234)
Receiving objects: 72% (169/234)
Receiving objects: 73% (171/234)
Receiving objects: 74% (174/234)
Receiving objects: 75% (176/234)
Receiving objects: 76% (178/234)
Receiving objects: 77% (181/234)
Receiving objects: 78% (183/234)
Receiving objects: 79% (185/234)
Receiving objects: 80% (188/234)
Receiving objects: 81% (190/234)
Receiving objects: 82% (192/234)
Receiving objects: 83% (195/234)
Receiving objects: 84% (197/234)
Receiving objects: 85% (199/234)
Receiving objects: 86% (202/234)
Receiving objects: 87% (204/234)
Receiving objects: 88% (206/234)
Receiving objects: 89% (209/234)
Receiving objects: 90% (211/234)
Receiving objects: 91% (213/234)
Receiving objects: 92% (216/234)
Receiving objects: 93% (218/234)
Receiving objects: 94% (220/234)
Receiving objects: 95% (223/234)
Receiving objects: 96% (225/234)
Receiving objects: 97% (227/234)
remote: Total 234 (delta 139), reused 167 (delta 111), pack-reused 5
Receiving objects: 98% (230/234)
Receiving objects: 99% (232/234)
Receiving objects: 100% (234/234)
Receiving objects: 100% (234/234), 834.35 KiB | 3.04 MiB/s, done.
Resolving deltas: 0% (0/139)
Resolving deltas: 2% (3/139)
Resolving deltas: 3% (5/139)
Resolving deltas: 4% (6/139)
Resolving deltas: 5% (7/139)
Resolving deltas: 6% (9/139)
Resolving deltas: 7% (10/139)
Resolving deltas: 8% (12/139)
Resolving deltas: 9% (13/139)
Resolving deltas: 10% (14/139)
Resolving deltas: 11% (16/139)
Resolving deltas: 12% (17/139)
Resolving deltas: 14% (20/139)
Resolving deltas: 15% (21/139)
Resolving deltas: 16% (23/139)
Resolving deltas: 17% (24/139)
Resolving deltas: 18% (26/139)
Resolving deltas: 19% (27/139)
Resolving deltas: 20% (28/139)
Resolving deltas: 21% (30/139)
Resolving deltas: 22% (31/139)
Resolving deltas: 23% (32/139)
Resolving deltas: 24% (34/139)
Resolving deltas: 25% (36/139)
Resolving deltas: 26% (37/139)
Resolving deltas: 27% (38/139)
Resolving deltas: 28% (39/139)
Resolving deltas: 29% (41/139)
Resolving deltas: 30% (42/139)
Resolving deltas: 31% (44/139)
Resolving deltas: 32% (45/139)
Resolving deltas: 33% (46/139)
Resolving deltas: 34% (48/139)
Resolving deltas: 35% (49/139)
Resolving deltas: 37% (52/139)
Resolving deltas: 38% (53/139)
Resolving deltas: 39% (55/139)
Resolving deltas: 40% (56/139)
Resolving deltas: 41% (57/139)
Resolving deltas: 42% (59/139)
Resolving deltas: 43% (60/139)
Resolving deltas: 45% (63/139)
Resolving deltas: 47% (66/139)
Resolving deltas: 48% (67/139)
Resolving deltas: 49% (69/139)
Resolving deltas: 50% (70/139)
Resolving deltas: 51% (71/139)
Resolving deltas: 52% (73/139)
Resolving deltas: 53% (74/139)
Resolving deltas: 54% (76/139)
Resolving deltas: 56% (79/139)
Resolving deltas: 57% (80/139)
Resolving deltas: 58% (81/139)
Resolving deltas: 59% (83/139)
Resolving deltas: 60% (84/139)
Resolving deltas: 61% (85/139)
Resolving deltas: 62% (87/139)
Resolving deltas: 63% (88/139)
Resolving deltas: 64% (89/139)
Resolving deltas: 65% (91/139)
Resolving deltas: 66% (92/139)
Resolving deltas: 67% (94/139)
Resolving deltas: 68% (95/139)
Resolving deltas: 69% (96/139)
Resolving deltas: 70% (98/139)
Resolving deltas: 71% (99/139)
Resolving deltas: 72% (101/139)
Resolving deltas: 73% (102/139)
Resolving deltas: 74% (103/139)
Resolving deltas: 75% (105/139)
Resolving deltas: 76% (106/139)
Resolving deltas: 77% (108/139)
Resolving deltas: 78% (109/139)
Resolving deltas: 79% (110/139)
Resolving deltas: 80% (112/139)
Resolving deltas: 82% (114/139)
Resolving deltas: 83% (116/139)
Resolving deltas: 84% (117/139)
Resolving deltas: 85% (119/139)
Resolving deltas: 86% (120/139)
Resolving deltas: 87% (121/139)
Resolving deltas: 88% (123/139)
Resolving deltas: 89% (124/139)
Resolving deltas: 90% (126/139)
Resolving deltas: 91% (127/139)
Resolving deltas: 92% (128/139)
Resolving deltas: 93% (130/139)
Resolving deltas: 94% (131/139)
Resolving deltas: 95% (133/139)
Resolving deltas: 96% (134/139)
Resolving deltas: 97% (135/139)
Resolving deltas: 98% (137/139)
Resolving deltas: 99% (138/139)
Resolving deltas: 100% (139/139)
Resolving deltas: 100% (139/139), completed with 12 local objects.
From https://github.com/python/cpython
- branch 3.12 -> FETCH_HEAD Note: switching to '635ce29257a7f7272af009d3c08379522317d89b'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 635ce29257 gh-104803: Implement ntpath.isdevdrive for checking whether a path is on a Windows Dev Drive (GH-104805) Switched to and reset branch '3.12'
./configure: line 2314: conftest.er1: No space left on device cat: conftest.er1: No such file or directory mv: cannot stat 'conftest.er1': No such file or directory ./configure: line 20948: conftest.c: No space left on device sed: can't read conftest.c: No such file or directory ./configure: line 2591: conftest.c: No space left on device ./configure: line 2311: conftest.err: No space left on device sed: can't read conftest.c: No such file or directory configure: error: Python requires C99 compatible libm
make: *** No rule to make target 'distclean'. Stop.
Test report
Sincerely, -The Buildbot
participants (1)
-
buildbot＠python.org