Buildbot failure in Python on AMD64 Windows8.1 Refleaks 3.x
The Buildbot has detected a new failure on builder AMD64 Windows8.1 Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#builders/157/builds/129
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: ware-win81-release
Build Reason: <unknown> Blamelist:
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
== Tests result: FAILURE then FAILURE ==
389 tests OK.
10 slowest tests:
- test_pydoc: 31 min 46 sec
- test_multiprocessing_spawn: 23 min 52 sec
- test_asyncio: 21 min 40 sec
- test_venv: 15 min 33 sec
- test_concurrent_futures: 12 min 56 sec
- test_compileall: 10 min 2 sec
- test_mmap: 9 min 57 sec
- test_io: 9 min 22 sec
- test_zipfile: 7 min 14 sec
- test_regrtest: 7 min
1 test failed: test_asyncio
30 tests skipped: test_curses test_dbm_gnu test_dbm_ndbm test_devpoll test_epoll test_fcntl test_fork1 test_gdb test_grp test_ioctl test_kqueue test_multiprocessing_fork test_multiprocessing_forkserver test_nis test_openpty test_ossaudiodev test_pipes test_poll test_posix test_pty test_pwd test_readline test_resource test_spwd test_syslog test_threadsignals test_wait3 test_wait4 test_xxtestfuzz test_zipfile64
2 re-run tests: test_asyncio test_tarfile
Total duration: 1 hour 47 min
Captured traceback
Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid
Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x59072dc890> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895470> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895aa0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f310> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f1b0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895aa0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x59068957e0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f3c0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f1b0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Executing <Task pending name='Task-12874' coro=<BaseSelectorEventLoop.sock_connect() running at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\selector_events.py:494> wait_for=<Future pending cb=[BaseSelectorEventLoop._sock_write_done(1996)(), <TaskWakeupMethWrapper object at 0x0000005909346F90>()] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:424> cb=[_run_until_complete_cb() at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:184] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:621> took 0.657 seconds .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895680> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895470> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Executing <Task pending name='Task-15794' coro=<BaseSelectorEventLoop.sock_connect() running at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\selector_events.py:494> wait_for=<Future pending cb=[BaseSelectorEventLoop._sock_write_done(1880)(), <TaskWakeupMethWrapper object at 0x0000005909441E50>()] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:424> cb=[_run_until_complete_cb() at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:184] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:621> took 0.109 seconds .
Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-m8j9m6t2.log' -> 'D:\\temp\\test_logging-2-m8j9m6t2.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-q9weggff.log' -> 'D:\\temp\\test_logging-2-q9weggff.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-wkb28s4j.log' -> 'D:\\temp\\test_logging-2-wkb28s4j.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-f8_734rp.log' -> 'D:\\temp\\test_logging-2-f8_734rp.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-q50s1je4.log' -> 'D:\\temp\\test_logging-2-q50s1je4.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-34sc5ruv.log' -> 'D:\\temp\\test_logging-2-34sc5ruv.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .
Test report
Failed tests:
- test_asyncio
Test leaking resources:
- test_asyncio: memory blocks
- test_asyncio: references
Sincerely, -The Buildbot
https://bugs.python.org/issue40115 test_asyncio leaked [3, 3, 3] references, sum=9
Le sam. 28 mars 2020 à 02:54, <buildbot@python.org> a écrit :
The Buildbot has detected a new failure on builder AMD64 Windows8.1 Refleaks 3.x while building Python. Full details are available at: https://buildbot.python.org/all/#builders/157/builds/129
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: ware-win81-release
Build Reason: <unknown> Blamelist:
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
== Tests result: FAILURE then FAILURE ==
389 tests OK.
10 slowest tests:
- test_pydoc: 31 min 46 sec
- test_multiprocessing_spawn: 23 min 52 sec
- test_asyncio: 21 min 40 sec
- test_venv: 15 min 33 sec
- test_concurrent_futures: 12 min 56 sec
- test_compileall: 10 min 2 sec
- test_mmap: 9 min 57 sec
- test_io: 9 min 22 sec
- test_zipfile: 7 min 14 sec
- test_regrtest: 7 min
1 test failed: test_asyncio
30 tests skipped: test_curses test_dbm_gnu test_dbm_ndbm test_devpoll test_epoll test_fcntl test_fork1 test_gdb test_grp test_ioctl test_kqueue test_multiprocessing_fork test_multiprocessing_forkserver test_nis test_openpty test_ossaudiodev test_pipes test_poll test_posix test_pty test_pwd test_readline test_resource test_spwd test_syslog test_threadsignals test_wait3 test_wait4 test_xxtestfuzz test_zipfile64
2 re-run tests: test_asyncio test_tarfile
Total duration: 1 hour 47 min
Captured traceback
Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid
Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x59072dc890> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895470> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895aa0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f310> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f1b0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895aa0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x59068957e0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f3c0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x590725f1b0> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Executing <Task pending name='Task-12874' coro=<BaseSelectorEventLoop.sock_connect() running at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\selector_events.py:494> wait_for=<Future pending cb=[BaseSelectorEventLoop._sock_write_done(1996)(), <TaskWakeupMethWrapper object at 0x0000005909346F90>()] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:424> cb=[_run_until_complete_cb() at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:184] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:621> took 0.657 seconds .Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895680> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Cancelling an overlapped future failed future: <_OverlappedFuture pending overlapped=<pending, 0x5906895470> cb=[BaseProactorEventLoop._loop_self_reading()]> Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\windows_events.py", line 66, in _cancel_overlapped self._ov.cancel() OSError: [WinError 6] The handle is invalid Executing <Task pending name='Task-15794' coro=<BaseSelectorEventLoop.sock_connect() running at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\selector_events.py:494> wait_for=<Future pending cb=[BaseSelectorEventLoop._sock_write_done(1880)(), <TaskWakeupMethWrapper object at 0x0000005909441E50>()] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:424> cb=[_run_until_complete_cb() at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:184] created at D:\buildarea\3.x.ware-win81-release.refleak\build\lib\asyncio\base_events.py:621> took 0.109 seconds .
Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-m8j9m6t2.log' -> 'D:\\temp\\test_logging-2-m8j9m6t2.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-q9weggff.log' -> 'D:\\temp\\test_logging-2-q9weggff.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-wkb28s4j.log' -> 'D:\\temp\\test_logging-2-wkb28s4j.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-f8_734rp.log' -> 'D:\\temp\\test_logging-2-f8_734rp.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-q50s1je4.log' -> 'D:\\temp\\test_logging-2-q50s1je4.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .--- Logging error --- Traceback (most recent call last): File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 74, in emit self.doRollover() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 177, in doRollover self.rotate(self.baseFilename, dfn) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\logging\handlers.py", line 117, in rotate self.rotator(source, dest) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5064, in rotator os.rename(source, dest + ".rotated") FileExistsError: [WinError 183] Cannot create a file when that file already exists: 'D:\\temp\\test_logging-2-34sc5ruv.log' -> 'D:\\temp\\test_logging-2-34sc5ruv.log.1.test.rotated' Call stack: File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\runpy.py", line 87, in _run_code exec(code, run_globals) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 47, in <module> _main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\regrtest.py", line 43, in _main main() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 712, in main Regrtest().main(tests=tests, **kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 634, in main self._main(tests, kwargs) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\main.py", line 654, in _main run_tests_worker(self.ns, self.worker_test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest_mp.py", line 80, in run_tests_worker result = runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 193, in runtest return _runtest(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 153, in _runtest result = _runtest_inner(ns, test_name, File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 270, in _runtest_inner refleak = _runtest_inner2(ns, test_name) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\runtest.py", line 232, in _runtest_inner2 refleak = dash_R(ns, test_name, test_runner) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\libregrtest\refleak.py", line 87, in dash_R test_func() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 1804, in inner return func(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5345, in test_main support.run_unittest(*tests) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2201, in run_unittest _run_suite(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\__init__.py", line 2079, in _run_suite result = runner.run(suite) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\support\testresult.py", line 162, in run test(self.result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 84, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\suite.py", line 122, in run test(result) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 719, in __call__ return self.run(*args, **kwds) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 659, in run self._callTestMethod(testMethod) File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\unittest\case.py", line 616, in _callTestMethod method() File "D:\buildarea\3.x.ware-win81-release.refleak\build\lib\test\test_logging.py", line 5071, in test_namer_rotator_inheritance rh.emit(self.next_rec()) Message: '2' Arguments: None .
Test report
Failed tests:
- test_asyncio
Test leaking resources:
- test_asyncio: memory blocks
- test_asyncio: references
Sincerely, -The Buildbot
Buildbot-status mailing list -- buildbot-status@python.org To unsubscribe send an email to buildbot-status-leave@python.org https://mail.python.org/mailman3/lists/buildbot-status.python.org/
-- Night gathers, and now my watch begins. It shall not end until my death.
participants (2)
-
buildbot＠python.org -
Victor Stinner