The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/341/builds/3275

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: edelsohn-fedora-rawhide-z

Build Reason: <unknown> Blamelist: Alex Doe <alexdoesh@gmail.com>, Alex Waygood <Alex.Waygood@Gmail.com>, Barney Gale <barney.gale@gmail.com>, Brandt Bucher <brandtbucher@microsoft.com>, Bruce Eckel <BruceTEckel@gmail.com>, Carl Meyer <carl@oddbird.net>, Crowthebird <78076854+thatbirdguythatuknownot@users.noreply.github.com>, Eamon Tracey <66919574+EamonTracey@users.noreply.github.com>, Eddie Elizondo <eduardo.elizondorueda@gmail.com>, Eric Snow <ericsnowcurrently@gmail.com>, Erlend E. Aasland <erlend.aasland@protonmail.com>, Erlend E. Aasland <erlend@python.org>, Gabriel Venberg <gabevenberg@gmail.com>, Gregory P. Smith <greg@krypto.org>, Guido van Rossum <guido@python.org>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Irit Katriel <1055913+iritkatriel@users.noreply.github.com>, James Webber <jamestwebber@users.noreply.github.com>, Jay <74105438+weijay0804@users.noreply.github.com>, Jelle Zijlstra <jelle.zijlstra@gmail.com>, Kirill Podoprigora <kirill.bast9@mail.ru>, Kumar Aditya <59607654+kumaradi tya303@users.noreply.github.com>, Lysandros Nikolaou <lisandrosnik@gmail.com>, Mark Shannon <mark@hotpy.org>, Mathieu Dupuy <deronnax@gmail.com>, Nikita Sobolev <mail@sobolevn.me>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Paul Moore <p.f.moore@gmail.com>, Raymond Hettinger <rhettinger@users.noreply.github.com>, Roderich Schupp <roderich.schupp@gmail.com>, Serhiy Storchaka <storchaka@gmail.com>, Skip Montanaro <skip.montanaro@gmail.com>, Steve Dower <steve.dower@python.org>, Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>, T. Wouters <thomas@python.org>, TATHAGATA ROY <royzen9495@gmail.com>, Terry Jan Reedy <tjreedy@udel.edu>, Tian Gao <gaogaotiantian@hotmail.com>, Victor Stinner <vstinner@python.org>, YAMAMOTO Takashi <yamamoto@midokura.com>, chgnrdv <52372310+chgnrdv@users.noreply.github.com>, zentarim <33746047+zentarim@users.noreply.github.com>, Łukasz Langa <lukasz@langa.pl>

BUILD FAILED: failed test (failure) uploading test-results.xml (failure)

Summary of the results of the build (if available):

==

Captured traceback

Note: switching to '1f74b9e933d546a015e8497e3b8728357196acc8'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 1f74b9e933 Fix c-analyzer for GCC: ignore LANG env var (#106173) Switched to and reset branch 'main'

find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2777: clean-retain-profile] Error 1 (ignored) In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ In function ‘_io_FileIO_close_impl’, inlined from ‘_io_FileIO_close’ at ./Modules/_io/clinic/fileio.c.h:33:12: ./Modules/_io/fileio.c:171:9: warning: ‘exc’ may be used uninitialized [-Wmaybe-uninitialized] 171 | _PyErr_ChainExceptions1(exc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/_io/fileio.c: In function ‘_io_FileIO_close’: ./Modules/_io/fileio.c:156:15: note: ‘exc’ was declared here 156 | PyObject *exc; | ^~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘_mpd_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘coeff_to_string’: cc1: note: destination object is likely at address zero In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ In function ‘coeff_to_string’: lto1: note: destination object is likely at address zero

Timeout (0:15:00)! Thread 0x000003ff83af7720 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 180 in prepare File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 27 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 803 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 758 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 822 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:2004: buildbottest] Error 1

Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-rawhide-z.lto-pgo/build/test-results.xml' for upload

Test report

Failed tests:

• test_tools

Sincerely, -The Buildbot