The Buildbot has detected a new failure on builder aarch64 Android 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/#/builders/1594/builds/3030

Buildbot URL: https://buildbot.python.org/

Worker for this Build: mhsmith-android-aarch64

Build Reason: <unknown> Blamelist: Douglas Thor <dougthor42@users.noreply.github.com>, Sergey B Kirpichev <skirpichev@gmail.com>, Tom Forbes <tom@tomforb.es>

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

Captured traceback

remote: Enumerating objects: 38, done.
remote: Counting objects: 3% (1/28)
remote: Counting objects: 7% (2/28)
remote: Counting objects: 10% (3/28)
remote: Counting objects: 14% (4/28)
remote: Counting objects: 17% (5/28)
remote: Counting objects: 21% (6/28)
remote: Counting objects: 25% (7/28)
remote: Counting objects: 28% (8/28)
remote: Counting objects: 32% (9/28)
remote: Counting objects: 35% (10/28)
remote: Counting objects: 39% (11/28)
remote: Counting objects: 42% (12/28)
remote: Counting objects: 46% (13/28)
remote: Counting objects: 50% (14/28)
remote: Counting objects: 53% (15/28)
remote: Counting objects: 57% (16/28)
remote: Counting objects: 60% (17/28)
remote: Counting objects: 64% (18/28)
remote: Counting objects: 67% (19/28)
remote: Counting objects: 71% (20/28)
remote: Counting objects: 75% (21/28)
remote: Counting objects: 78% (22/28)
remote: Counting objects: 82% (23/28)
remote: Counting objects: 85% (24/28)
remote: Counting objects: 89% (25/28)
remote: Counting objects: 92% (26/28)
remote: Counting objects: 96% (27/28)
remote: Counting objects: 100% (28/28)
remote: Counting objects: 100% (28/28), done.
remote: Compressing objects: 4% (1/22)
remote: Compressing objects: 9% (2/22)
remote: Compressing objects: 13% (3/22)
remote: Compressing objects: 18% (4/22)
remote: Compressing objects: 22% (5/22)
remote: Compressing objects: 27% (6/22)
remote: Compressing objects: 31% (7/22)
remote: Compressing objects: 36% (8/22)
remote: Compressing objects: 40% (9/22)
remote: Compressing objects: 45% (10/22)
remote: Compressing objects: 50% (11/22)
remote: Compressing objects: 54% (12/22)
remote: Compressing objects: 59% (13/22)
remote: Compressing objects: 63% (14/22)
remote: Compressing objects: 68% (15/22)
remote: Compressing objects: 72% (16/22)
remote: Compressing objects: 77% (17/22)
remote: Compressing objects: 81% (18/22)
remote: Compressing objects: 86% (19/22)
remote: Compressing objects: 90% (20/22)
remote: Compressing objects: 95% (21/22)
remote: Compressing objects: 100% (22/22)
remote: Compressing objects: 100% (22/22), done.
remote: Total 38 (delta 11), reused 14 (delta 6), pack-reused 10 (from 3)
From https://github.com/python/cpython

• branch main -> FETCH_HEAD Note: switching to '34d7351ac770ac49875fc39396b2a97828ba05ad'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 34d7351ac77 gh-133722: Add Difflib theme to _colorize and 'color' option to difflib.unified_diff (#133725) Switched to and reset branch 'main'

configure: WARNING: no system libmpdec found; falling back to pure-Python version for the decimal module configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly.

% Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 192k 100 192k 0 0 1700k 0 --:--:-- --:--:-- --:--:-- 1700k % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 42455 100 42455 0 0 279k 0 --:--:-- --:--:-- --:--:-- 279k % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 5041k 100 5041k 0 0 28.8M 0 --:--:-- --:--:-- --:--:-- 28.8M % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 1257k 100 1257k 0 0 12.3M 0 --:--:-- --:--:-- --:--:-- 12.3M % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 635k 100 635k 0 0 6054k 0 --:--:-- --:--:-- --:--:-- 6054k % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0

100 479k 100 479k 0 0 4145k 0 --:--:-- --:--:-- --:--:-- 4145k ../../configure: line 4071: pkg-config: command not found configure: WARNING: no system libmpdec found; falling back to pure-Python version for the decimal module configure: WARNING: pkg-config is missing. Some dependencies may not be detected correctly.

../../Python/fileutils.c:460:1: warning: unused function 'decode_current_locale' [-Wunused-function] 460 | decode_current_locale(const char* arg, wchar_t **wstr, size_t *wlen, | ^~~~~~~~~~~~~~~~~~~~~ ../../Python/fileutils.c:679:1: warning: unused function 'encode_current_locale' [-Wunused-function] 679 | encode_current_locale(const wchar_t *text, char **str, | ^~~~~~~~~~~~~~~~~~~~~ 2 warnings generated. ../../Modules/_localemodule.c:195:1: warning: unused function 'is_all_ascii' [-Wunused-function] 195 | is_all_ascii(const char *str) | ^~~~~~~~~~~~ 1 warning generated. ../../Modules/pwdmodule.c:69:16: warning: unused variable 'pwd_db_mutex' [-Wunused-variable] 69 | static PyMutex pwd_db_mutex = {0}; | ^~~~~~~~~~~~ 1 warning generated. ../../Modules/_hacl/Lib_Memzero0.c:66:6: warning: "Your platform does not support any safe implementation of memzero -- consider a pull request!" [-W#warnings] 66 | #warning "Your platform does not support any safe implementation of memzero -- consider a pull request!" | ^ 1 warning generated.

% Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 8784 100 8784 0 0 49915 0 --:--:-- --:--:-- --:--:-- 50194 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 2894 100 2894 0 0 28876 0 --:--:-- --:--:-- --:--:-- 28940 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed

0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 43504 100 43504 0 0 429k 0 --:--:-- --:--:-- --:--:-- 433k

Test report

Sincerely, -The Buildbot