☠ Buildbot (Python): python/cpython - failed test (failure) (main)
The Buildbot has detected a new failure on builder AMD64 Windows11 Non-Debug 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/914/builds/3011
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: ware-win11
Build Reason: <unknown> Blamelist: AN Long <aisk@users.noreply.github.com>, Serhiy Storchaka <storchaka@gmail.com>, Terry Jan Reedy <tjreedy@udel.edu>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 43, done.
remote: Counting objects: 2% (1/43)
remote: Counting objects: 4% (2/43)
remote: Counting objects: 6% (3/43)
remote: Counting objects: 9% (4/43)
remote: Counting objects: 11% (5/43)
remote: Counting objects: 13% (6/43)
remote: Counting objects: 16% (7/43)
remote: Counting objects: 18% (8/43)
remote: Counting objects: 20% (9/43)
remote: Counting objects: 23% (10/43)
remote: Counting objects: 25% (11/43)
remote: Counting objects: 27% (12/43)
remote: Counting objects: 30% (13/43)
remote: Counting objects: 32% (14/43)
remote: Counting objects: 34% (15/43)
remote: Counting objects: 37% (16/43)
remote: Counting objects: 39% (17/43)
remote: Counting objects: 41% (18/43)
remote: Counting objects: 44% (19/43)
remote: Counting objects: 46% (20/43)
remote: Counting objects: 48% (21/43)
remote: Counting objects: 51% (22/43)
remote: Counting objects: 53% (23/43)
remote: Counting objects: 55% (24/43)
remote: Counting objects: 58% (25/43)
remote: Counting objects: 60% (26/43)
remote: Counting objects: 62% (27/43)
remote: Counting objects: 65% (28/43)
remote: Counting objects: 67% (29/43)
remote: Counting objects: 69% (30/43)
remote: Counting objects: 72% (31/43)
remote: Counting objects: 74% (32/43)
remote: Counting objects: 76% (33/43)
remote: Counting objects: 79% (34/43)
remote: Counting objects: 81% (35/43)
remote: Counting objects: 83% (36/43)
remote: Counting objects: 86% (37/43)
remote: Counting objects: 88% (38/43)
remote: Counting objects: 90% (39/43)
remote: Counting objects: 93% (40/43)
remote: Counting objects: 95% (41/43)
remote: Counting objects: 97% (42/43)
remote: Counting objects: 100% (43/43)
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 2% (1/39)
remote: Compressing objects: 5% (2/39)
remote: Compressing objects: 7% (3/39)
remote: Compressing objects: 10% (4/39)
remote: Compressing objects: 12% (5/39)
remote: Compressing objects: 15% (6/39)
remote: Compressing objects: 17% (7/39)
remote: Compressing objects: 20% (8/39)
remote: Compressing objects: 23% (9/39)
remote: Compressing objects: 25% (10/39)
remote: Compressing objects: 28% (11/39)
remote: Compressing objects: 30% (12/39)
remote: Compressing objects: 33% (13/39)
remote: Compressing objects: 35% (14/39)
remote: Compressing objects: 38% (15/39)
remote: Compressing objects: 41% (16/39)
remote: Compressing objects: 43% (17/39)
remote: Compressing objects: 46% (18/39)
remote: Compressing objects: 48% (19/39)
remote: Compressing objects: 51% (20/39)
remote: Compressing objects: 53% (21/39)
remote: Compressing objects: 56% (22/39)
remote: Compressing objects: 58% (23/39)
remote: Compressing objects: 61% (24/39)
remote: Compressing objects: 64% (25/39)
remote: Compressing objects: 66% (26/39)
remote: Compressing objects: 69% (27/39)
remote: Compressing objects: 71% (28/39)
remote: Compressing objects: 74% (29/39)
remote: Compressing objects: 76% (30/39)
remote: Compressing objects: 79% (31/39)
remote: Compressing objects: 82% (32/39)
remote: Compressing objects: 84% (33/39)
remote: Compressing objects: 87% (34/39)
remote: Compressing objects: 89% (35/39)
remote: Compressing objects: 92% (36/39)
remote: Compressing objects: 94% (37/39)
remote: Compressing objects: 97% (38/39)
remote: Compressing objects: 100% (39/39)
remote: Compressing objects: 100% (39/39), done.
remote: Total 43 (delta 9), reused 24 (delta 4), pack-reused 0
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '26c0e5e03a8603eccfd98045bc69fde2e24682e3'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 26c0e5e03a gh-108082: Remove _PyErr_WriteUnraisableMsg() (GH-111643) Switched to and reset branch 'main'
Could Not Find b:\uildarea\3.x.ware-win11.nondebug\build\Lib\*.pyc The system cannot find the file specified. Could Not Find b:\uildarea\3.x.ware-win11.nondebug\build\PCbuild\python*.zip
Could Not Find b:\uildarea\3.x.ware-win11.nondebug\build\PCbuild\python*.zip
Test report
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder aarch64 Debian Clang LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1084/builds/2497
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: gps-arm64-debian
Build Reason: <unknown> Blamelist: Serhiy Storchaka <storchaka@gmail.com>, Terry Jan Reedy <tjreedy@udel.edu>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 29, done.
remote: Counting objects: 3% (1/29)
remote: Counting objects: 6% (2/29)
remote: Counting objects: 10% (3/29)
remote: Counting objects: 13% (4/29)
remote: Counting objects: 17% (5/29)
remote: Counting objects: 20% (6/29)
remote: Counting objects: 24% (7/29)
remote: Counting objects: 27% (8/29)
remote: Counting objects: 31% (9/29)
remote: Counting objects: 34% (10/29)
remote: Counting objects: 37% (11/29)
remote: Counting objects: 41% (12/29)
remote: Counting objects: 44% (13/29)
remote: Counting objects: 48% (14/29)
remote: Counting objects: 51% (15/29)
remote: Counting objects: 55% (16/29)
remote: Counting objects: 58% (17/29)
remote: Counting objects: 62% (18/29)
remote: Counting objects: 65% (19/29)
remote: Counting objects: 68% (20/29)
remote: Counting objects: 72% (21/29)
remote: Counting objects: 75% (22/29)
remote: Counting objects: 79% (23/29)
remote: Counting objects: 82% (24/29)
remote: Counting objects: 86% (25/29)
remote: Counting objects: 89% (26/29)
remote: Counting objects: 93% (27/29)
remote: Counting objects: 96% (28/29)
remote: Counting objects: 100% (29/29)
remote: Counting objects: 100% (29/29), done.
remote: Compressing objects: 3% (1/27)
remote: Compressing objects: 7% (2/27)
remote: Compressing objects: 11% (3/27)
remote: Compressing objects: 14% (4/27)
remote: Compressing objects: 18% (5/27)
remote: Compressing objects: 22% (6/27)
remote: Compressing objects: 25% (7/27)
remote: Compressing objects: 29% (8/27)
remote: Compressing objects: 33% (9/27)
remote: Compressing objects: 37% (10/27)
remote: Compressing objects: 40% (11/27)
remote: Compressing objects: 44% (12/27)
remote: Compressing objects: 48% (13/27)
remote: Compressing objects: 51% (14/27)
remote: Compressing objects: 55% (15/27)
remote: Compressing objects: 59% (16/27)
remote: Compressing objects: 62% (17/27)
remote: Compressing objects: 66% (18/27)
remote: Compressing objects: 70% (19/27)
remote: Compressing objects: 74% (20/27)
remote: Compressing objects: 77% (21/27)
remote: Compressing objects: 81% (22/27)
remote: Compressing objects: 85% (23/27)
remote: Compressing objects: 88% (24/27)
remote: Compressing objects: 92% (25/27)
remote: Compressing objects: 96% (26/27)
remote: Compressing objects: 100% (27/27)
remote: Compressing objects: 100% (27/27), done.
remote: Total 29 (delta 3), reused 18 (delta 2), pack-reused 0
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '26c0e5e03a8603eccfd98045bc69fde2e24682e3'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 26c0e5e03a gh-108082: Remove _PyErr_WriteUnraisableMsg() (GH-111643) Switched to and reset branch 'main'
find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2846: clean-retain-profile] Error 1 (ignored) Python/crossinterp.c:1472:1: warning: unused function '_session_is_active' [-Wunused-function] _session_is_active(_PyXI_session *session) ^ 1 warning generated. Python/ceval_gil.c:429:1: warning: unused function 'current_thread_holds_gil' [-Wunused-function] current_thread_holds_gil(struct _gil_runtime_state *gil, PyThreadState *tstate) ^ 1 warning generated. Python/optimizer.c:428:9: warning: variable 'reserved' set but not used [-Wunused-but-set-variable] int reserved = 0; ^ 1 warning generated. ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead else if (0 && parser->m_characterDataHandler) ^ /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead else if (0 && parser->m_characterDataHandler) ^ /* DISABLES CODE */ ( ) 2 warnings generated. Python/crossinterp.c:1472:1: warning: unused function '_session_is_active' [-Wunused-function] _session_is_active(_PyXI_session *session) ^ 1 warning generated. Python/ceval_gil.c:429:1: warning: unused function 'current_thread_holds_gil' [-Wunused-function] current_thread_holds_gil(struct _gil_runtime_state *gil, PyThreadState *tstate) ^ 1 warning generated. Python/optimizer.c:428:9: warning: variable 'reserved' set but not used [-Wunused-but-set-variable] int reserved = 0; ^ 1 warning generated. warning: no profile data available for file "_freeze_module.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "getpath_noop.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_csv.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "rotatingtree.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_lsprof.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_zoneinfo.c" [-Wprofile-instr-unprofiled] warning: no profile data available for file "_xxsubinterpretersmodule.c" [-Wprofile-instr-unprofiled] warning: no profile data available for file "_xxinterpchannelsmodule.c" [-Wprofile-instr-unprofiled] 1 warning generated. 1 warning generated. 1 warning generated. ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead else if (0 && parser->m_characterDataHandler) ^ /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead else if (0 && parser->m_characterDataHandler) ^ /* DISABLES CODE */ ( ) 2 warnings generated. warning: no profile data available for file "mmapmodule.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "syslogmodule.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "posixshmem.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_curses_panel.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_cursesmodule.c" [-Wprofile-instr-unprofiled] warning: no profile data available for file "_uuidmodule.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "xxsubtype.c" [-Wprofile-instr-unprofiled] 1 warning generated. 1 warning generated. warning: no profile data available for file "_xxtestfuzz.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "fuzzer.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_testclinic_limited.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_testimportmultiple.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_testsinglephase.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_testmultiphase.c" [-Wprofile-instr-unprofiled] warning: no profile data available for file "xxlimited.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "_ctypes_test.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: no profile data available for file "xxlimited_35.c" [-Wprofile-instr-unprofiled] 1 warning generated. 1 warning generated. warning: no profile data available for file "_testclinic.c" [-Wprofile-instr-unprofiled] 1 warning generated. warning: profile data may be out of date: of 3 functions, 1 has mismatched data that will be ignored [-Wprofile-instr-out-of-date] 1 warning generated.
make: *** [Makefile:2067: buildbottest] Error 3
Test report
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Clang 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/3/builds/4876
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-z
Build Reason: <unknown> Blamelist: AN Long <aisk@users.noreply.github.com>, Eric Snow <ericsnowcurrently@gmail.com>, LoipesMas <46327403+LoipesMas@users.noreply.github.com>, Mark Shannon <mark@hotpy.org>, Michael Droettboom <mdboom@gmail.com>, Serhiy Storchaka <storchaka@gmail.com>, Terry Jan Reedy <tjreedy@udel.edu>, Tian Gao <gaogaotiantian@hotmail.com>, Victor Stinner <vstinner@python.org>, dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>, partev <petrosyan@gmail.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 29, done.
remote: Counting objects: 3% (1/29)
remote: Counting objects: 6% (2/29)
remote: Counting objects: 10% (3/29)
remote: Counting objects: 13% (4/29)
remote: Counting objects: 17% (5/29)
remote: Counting objects: 20% (6/29)
remote: Counting objects: 24% (7/29)
remote: Counting objects: 27% (8/29)
remote: Counting objects: 31% (9/29)
remote: Counting objects: 34% (10/29)
remote: Counting objects: 37% (11/29)
remote: Counting objects: 41% (12/29)
remote: Counting objects: 44% (13/29)
remote: Counting objects: 48% (14/29)
remote: Counting objects: 51% (15/29)
remote: Counting objects: 55% (16/29)
remote: Counting objects: 58% (17/29)
remote: Counting objects: 62% (18/29)
remote: Counting objects: 65% (19/29)
remote: Counting objects: 68% (20/29)
remote: Counting objects: 72% (21/29)
remote: Counting objects: 75% (22/29)
remote: Counting objects: 79% (23/29)
remote: Counting objects: 82% (24/29)
remote: Counting objects: 86% (25/29)
remote: Counting objects: 89% (26/29)
remote: Counting objects: 93% (27/29)
remote: Counting objects: 96% (28/29)
remote: Counting objects: 100% (29/29)
remote: Counting objects: 100% (29/29), done.
remote: Compressing objects: 3% (1/27)
remote: Compressing objects: 7% (2/27)
remote: Compressing objects: 11% (3/27)
remote: Compressing objects: 14% (4/27)
remote: Compressing objects: 18% (5/27)
remote: Compressing objects: 22% (6/27)
remote: Compressing objects: 25% (7/27)
remote: Compressing objects: 29% (8/27)
remote: Compressing objects: 33% (9/27)
remote: Compressing objects: 37% (10/27)
remote: Compressing objects: 40% (11/27)
remote: Compressing objects: 44% (12/27)
remote: Compressing objects: 48% (13/27)
remote: Compressing objects: 51% (14/27)
remote: Compressing objects: 55% (15/27)
remote: Compressing objects: 59% (16/27)
remote: Compressing objects: 62% (17/27)
remote: Compressing objects: 66% (18/27)
remote: Compressing objects: 70% (19/27)
remote: Compressing objects: 74% (20/27)
remote: Compressing objects: 77% (21/27)
remote: Compressing objects: 81% (22/27)
remote: Compressing objects: 85% (23/27)
remote: Compressing objects: 88% (24/27)
remote: Compressing objects: 92% (25/27)
remote: Compressing objects: 96% (26/27)
remote: Compressing objects: 100% (27/27)
remote: Compressing objects: 100% (27/27), done.
remote: Total 29 (delta 3), reused 18 (delta 2), pack-reused 0
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '26c0e5e03a8603eccfd98045bc69fde2e24682e3'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 26c0e5e03a gh-108082: Remove _PyErr_WriteUnraisableMsg() (GH-111643) Switched to and reset branch 'main'
configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING:
Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information.
make: *** [Makefile:2065: buildbottest] Error 3
Test report
Sincerely, -The Buildbot
participants (1)
-
buildbot＠python.org