☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#builders/545/builds/3682
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-z
Build Reason: <unknown>
Blamelist: 180909 734461790@qq.com, AN Long aisk@users.noreply.github.com, Adam Turner 9087854+AA-Turner@users.noreply.github.com, Adrian Garcia Badaracco 1755071+adriangb@users.noreply.github.com, Adrien mrnycticorax@gmail.com, Aidan Melen aidan-melen@protonmail.com, Alex Gaynor alex.gaynor@gmail.com, Alex Waygood Alex.Waygood@Gmail.com, Alexander Belopolsky abalkin@users.noreply.github.com, Ali-Akber Saifee ali@indydevs.org, Allan Lago 35788148+alago1@users.noreply.github.com, Ankit Kumar Pandey 93041495+itsankitkp@users.noreply.github.com, Bar Harel bharel@barharel.com, Barney Gale barney.gale@gmail.com, Benjamin Peterson benjamin@python.org, Boris Verkhovskiy boris.verk@gmail.com, Brett Simmers swtaarrs@users.noreply.github.com, Carl Meyer carl@oddbird.net, Carol Willing carolcode@willingconsulting.com, Christopher Chavez chrischavez@gmx.us, Dan Hemberger 846186+hemberger@users.noreply.github.com, Daniel Versoza daniel.ve3@gmail.com, Do
ng-hee Na donghee.na@python.org, Eddie Elizondo eduardo.elizondorueda@gmail.com, Eric Snow ericsnowcurrently@gmail.com, Eric Wieser wieser.eric@gmail.com, Erlend E. Aasland erlend.aasland@protonmail.com, Ethan Furman ethan@stoneleaf.us, Ezio Melotti ezio.melotti@gmail.com, Finn Womack flan313@gmail.com, Franek Magiera framagie@gmail.com, Furkan Onder furkanonder@protonmail.com, Giampaolo Rodola g.rodola@gmail.com, Gordon Messmer gordon.messmer@gmail.com, Howie Zhao howiezhaohr@hotmail.com, Hugo van Kemenade hugovk@users.noreply.github.com, Inada Naoki songofacandy@gmail.com, Irit Katriel 1055913+iritkatriel@users.noreply.github.com, Itamar Ostricher itamarost@gmail.com, Itayazolay itayazolay@gmail.com, Jaime Alonso Lorenzo jaimealonsolorenzo@gmail.com, James Hilton-Balfe gobot1234yt@gmail.com, Jason R. Coombs jaraco@jaraco.com, Jelle Zijlstra jelle.zijlstra@gmail.com, JosephSBoyle 48555120+JosephSBoyle@users.noreply.github.com, Joshua He
rman 30265+zitterbewegung@users.noreply.github.com, Juhi Chandalia jkchandalia@gmail.com, Kirill 80244920+Eclips4@users.noreply.github.com, Kumar Aditya 59607654+kumaraditya303@users.noreply.github.com, Lysandros Nikolaou lisandrosnik@gmail.com, Marek Marczykowski-Górecki marmarek@invisiblethingslab.com, Mark Shannon mark@hotpy.org, Michael Blahay mblahay@users.noreply.github.com, Miro Hrončok miro@hroncok.cz, Ned Batchelder ned@nedbatchelder.com, Nick Burns nburns@users.noreply.github.com, Nikita Sobolev mail@sobolevn.me, Oleg Iarygin oleg@arhadthedev.net, Olga Matoula olgamatoula@gmail.com, Pablo Galindo Salgado Pablogsal@gmail.com, Paul Ganssle 1377457+pganssle@users.noreply.github.com, Paul Moore p.f.moore@gmail.com, Petr Viktorin encukou@gmail.com, Pradyun Gedam pradyunsg@gmail.com, Prince Roshan princekrroshan01@gmail.com, Rafael Fontenelle rffontenelle@users.noreply.github.com, Randy 69558016+san-juan1667@users.noreply.github.com,
Raymond Hettinger rhettinger@users.noreply.github.com, Reese Hyde 34076153+rmehyde@users.noreply.github.com, Richard Hajek richard.m.hajek@gmail.com, Rodolfo M. Pereira rodolfomp123@gmail.com, Samuel Sloniker sam@kj7rrv.com, Senthil Kumaran senthil@python.org, Sergii Dymchenko kit1980@gmail.com, Shantanu 12621235+hauntsaninja@users.noreply.github.com, Skip Montanaro skip.montanaro@gmail.com, Stanislav Syekirin syekirin@gmail.com, Stanley 46876382+slateny@users.noreply.github.com, Stefano Rivera stefano@rivera.za.net, Steve Dower steve.dower@python.org, Terry Jan Reedy tjreedy@udel.edu, Tian Gao gaogaotiantian@hotmail.com, Tomas R tomas.roun8@gmail.com, Wheeler Law wheeler.law@outlook.com, William Andrea william.j.andrea@gmail.com, Zachary Ware zach@python.org, chgnrdv 52372310+chgnrdv@users.noreply.github.com, jb2170 email@jb2170.com, partev petrosyan@gmail.com, sunmy2019 59365878+sunmy2019@users.noreply.github.com, yuki
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 217, done.
remote: Counting objects: 0% (1/211)
remote: Counting objects: 1% (3/211)
remote: Counting objects: 2% (5/211)
remote: Counting objects: 3% (7/211)
remote: Counting objects: 4% (9/211)
remote: Counting objects: 5% (11/211)
remote: Counting objects: 6% (13/211)
remote: Counting objects: 7% (15/211)
remote: Counting objects: 8% (17/211)
remote: Counting objects: 9% (19/211)
remote: Counting objects: 10% (22/211)
remote: Counting objects: 11% (24/211)
remote: Counting objects: 12% (26/211)
remote: Counting objects: 13% (28/211)
remote: Counting objects: 14% (30/211)
remote: Counting objects: 15% (32/211)
remote: Counting objects: 16% (34/211)
remote: Counting objects: 17% (36/211)
remote: Counting objects: 18% (38/211)
remote: Counting objects: 19% (41/211)
remote: Counting objects: 20% (43/211)
remote: Counting objects: 21% (45/211)
remote: Counting objects: 22% (47/211)
remote: Counting objects: 23% (49/211)
remote: Counting objects: 24% (51/211)
remote: Counting objects: 25% (53/211)
remote: Counting objects: 26% (55/211)
remote: Counting objects: 27% (57/211)
remote: Counting objects: 28% (60/211)
remote: Counting objects: 29% (62/211)
remote: Counting objects: 30% (64/211)
remote: Counting objects: 31% (66/211)
remote: Counting objects: 32% (68/211)
remote: Counting objects: 33% (70/211)
remote: Counting objects: 34% (72/211)
remote: Counting objects: 35% (74/211)
remote: Counting objects: 36% (76/211)
remote: Counting objects: 37% (79/211)
remote: Counting objects: 38% (81/211)
remote: Counting objects: 39% (83/211)
remote: Counting objects: 40% (85/211)
remote: Counting objects: 41% (87/211)
remote: Counting objects: 42% (89/211)
remote: Counting objects: 43% (91/211)
remote: Counting objects: 44% (93/211)
remote: Counting objects: 45% (95/211)
remote: Counting objects: 46% (98/211)
remote: Counting objects: 47% (100/211)
remote: Counting objects: 48% (102/211)
remote: Counting objects: 49% (104/211)
remote: Counting objects: 50% (106/211)
remote: Counting objects: 51% (108/211)
remote: Counting objects: 52% (110/211)
remote: Counting objects: 53% (112/211)
remote: Counting objects: 54% (114/211)
remote: Counting objects: 55% (117/211)
remote: Counting objects: 56% (119/211)
remote: Counting objects: 57% (121/211)
remote: Counting objects: 58% (123/211)
remote: Counting objects: 59% (125/211)
remote: Counting objects: 60% (127/211)
remote: Counting objects: 61% (129/211)
remote: Counting objects: 62% (131/211)
remote: Counting objects: 63% (133/211)
remote: Counting objects: 64% (136/211)
remote: Counting objects: 65% (138/211)
remote: Counting objects: 66% (140/211)
remote: Counting objects: 67% (142/211)
remote: Counting objects: 68% (144/211)
remote: Counting objects: 69% (146/211)
remote: Counting objects: 70% (148/211)
remote: Counting objects: 71% (150/211)
remote: Counting objects: 72% (152/211)
remote: Counting objects: 73% (155/211)
remote: Counting objects: 74% (157/211)
remote: Counting objects: 75% (159/211)
remote: Counting objects: 76% (161/211)
remote: Counting objects: 77% (163/211)
remote: Counting objects: 78% (165/211)
remote: Counting objects: 79% (167/211)
remote: Counting objects: 80% (169/211)
remote: Counting objects: 81% (171/211)
remote: Counting objects: 82% (174/211)
remote: Counting objects: 83% (176/211)
remote: Counting objects: 84% (178/211)
remote: Counting objects: 85% (180/211)
remote: Counting objects: 86% (182/211)
remote: Counting objects: 87% (184/211)
remote: Counting objects: 88% (186/211)
remote: Counting objects: 89% (188/211)
remote: Counting objects: 90% (190/211)
remote: Counting objects: 91% (193/211)
remote: Counting objects: 92% (195/211)
remote: Counting objects: 93% (197/211)
remote: Counting objects: 94% (199/211)
remote: Counting objects: 95% (201/211)
remote: Counting objects: 96% (203/211)
remote: Counting objects: 97% (205/211)
remote: Counting objects: 98% (207/211)
remote: Counting objects: 99% (209/211)
remote: Counting objects: 100% (211/211)
remote: Counting objects: 100% (211/211), done.
remote: Compressing objects: 0% (1/118)
remote: Compressing objects: 1% (2/118)
remote: Compressing objects: 2% (3/118)
remote: Compressing objects: 3% (4/118)
remote: Compressing objects: 4% (5/118)
remote: Compressing objects: 5% (6/118)
remote: Compressing objects: 6% (8/118)
remote: Compressing objects: 7% (9/118)
remote: Compressing objects: 8% (10/118)
remote: Compressing objects: 9% (11/118)
remote: Compressing objects: 10% (12/118)
remote: Compressing objects: 11% (13/118)
remote: Compressing objects: 12% (15/118)
remote: Compressing objects: 13% (16/118)
remote: Compressing objects: 14% (17/118)
remote: Compressing objects: 15% (18/118)
remote: Compressing objects: 16% (19/118)
remote: Compressing objects: 17% (21/118)
remote: Compressing objects: 18% (22/118)
remote: Compressing objects: 19% (23/118)
remote: Compressing objects: 20% (24/118)
remote: Compressing objects: 21% (25/118)
remote: Compressing objects: 22% (26/118)
remote: Compressing objects: 23% (28/118)
remote: Compressing objects: 24% (29/118)
remote: Compressing objects: 25% (30/118)
remote: Compressing objects: 26% (31/118)
remote: Compressing objects: 27% (32/118)
remote: Compressing objects: 28% (34/118)
remote: Compressing objects: 29% (35/118)
remote: Compressing objects: 30% (36/118)
remote: Compressing objects: 31% (37/118)
remote: Compressing objects: 32% (38/118)
remote: Compressing objects: 33% (39/118)
remote: Compressing objects: 34% (41/118)
remote: Compressing objects: 35% (42/118)
remote: Compressing objects: 36% (43/118)
remote: Compressing objects: 37% (44/118)
remote: Compressing objects: 38% (45/118)
remote: Compressing objects: 39% (47/118)
remote: Compressing objects: 40% (48/118)
remote: Compressing objects: 41% (49/118)
remote: Compressing objects: 42% (50/118)
remote: Compressing objects: 43% (51/118)
remote: Compressing objects: 44% (52/118)
remote: Compressing objects: 45% (54/118)
remote: Compressing objects: 46% (55/118)
remote: Compressing objects: 47% (56/118)
remote: Compressing objects: 48% (57/118)
remote: Compressing objects: 49% (58/118)
remote: Compressing objects: 50% (59/118)
remote: Compressing objects: 51% (61/118)
remote: Compressing objects: 52% (62/118)
remote: Compressing objects: 53% (63/118)
remote: Compressing objects: 54% (64/118)
remote: Compressing objects: 55% (65/118)
remote: Compressing objects: 56% (67/118)
remote: Compressing objects: 57% (68/118)
remote: Compressing objects: 58% (69/118)
remote: Compressing objects: 59% (70/118)
remote: Compressing objects: 60% (71/118)
remote: Compressing objects: 61% (72/118)
remote: Compressing objects: 62% (74/118)
remote: Compressing objects: 63% (75/118)
remote: Compressing objects: 64% (76/118)
remote: Compressing objects: 65% (77/118)
remote: Compressing objects: 66% (78/118)
remote: Compressing objects: 67% (80/118)
remote: Compressing objects: 68% (81/118)
remote: Compressing objects: 69% (82/118)
remote: Compressing objects: 70% (83/118)
remote: Compressing objects: 71% (84/118)
remote: Compressing objects: 72% (85/118)
remote: Compressing objects: 73% (87/118)
remote: Compressing objects: 74% (88/118)
remote: Compressing objects: 75% (89/118)
remote: Compressing objects: 76% (90/118)
remote: Compressing objects: 77% (91/118)
remote: Compressing objects: 78% (93/118)
remote: Compressing objects: 79% (94/118)
remote: Compressing objects: 80% (95/118)
remote: Compressing objects: 81% (96/118)
remote: Compressing objects: 82% (97/118)
remote: Compressing objects: 83% (98/118)
remote: Compressing objects: 84% (100/118)
remote: Compressing objects: 85% (101/118)
remote: Compressing objects: 86% (102/118)
remote: Compressing objects: 87% (103/118)
remote: Compressing objects: 88% (104/118)
remote: Compressing objects: 89% (106/118)
remote: Compressing objects: 90% (107/118)
remote: Compressing objects: 91% (108/118)
remote: Compressing objects: 92% (109/118)
remote: Compressing objects: 93% (110/118)
remote: Compressing objects: 94% (111/118)
remote: Compressing objects: 95% (113/118)
remote: Compressing objects: 96% (114/118)
remote: Compressing objects: 97% (115/118)
remote: Compressing objects: 98% (116/118)
remote: Compressing objects: 99% (117/118)
remote: Compressing objects: 100% (118/118)
remote: Compressing objects: 100% (118/118), done.
Receiving objects: 0% (1/217)
Receiving objects: 1% (3/217)
Receiving objects: 2% (5/217)
Receiving objects: 3% (7/217)
Receiving objects: 4% (9/217)
Receiving objects: 5% (11/217)
Receiving objects: 6% (14/217)
Receiving objects: 7% (16/217)
Receiving objects: 8% (18/217)
Receiving objects: 9% (20/217)
Receiving objects: 10% (22/217)
Receiving objects: 11% (24/217)
Receiving objects: 12% (27/217)
Receiving objects: 13% (29/217)
Receiving objects: 14% (31/217)
Receiving objects: 15% (33/217)
Receiving objects: 16% (35/217)
Receiving objects: 17% (37/217)
Receiving objects: 18% (40/217)
Receiving objects: 19% (42/217)
Receiving objects: 20% (44/217)
Receiving objects: 21% (46/217)
Receiving objects: 22% (48/217)
Receiving objects: 23% (50/217)
Receiving objects: 24% (53/217)
Receiving objects: 25% (55/217)
Receiving objects: 26% (57/217)
Receiving objects: 27% (59/217)
Receiving objects: 28% (61/217)
Receiving objects: 29% (63/217)
Receiving objects: 30% (66/217)
Receiving objects: 31% (68/217)
Receiving objects: 32% (70/217)
Receiving objects: 33% (72/217)
Receiving objects: 34% (74/217)
Receiving objects: 35% (76/217)
Receiving objects: 36% (79/217)
Receiving objects: 37% (81/217)
Receiving objects: 38% (83/217)
Receiving objects: 39% (85/217)
Receiving objects: 40% (87/217)
Receiving objects: 41% (89/217)
Receiving objects: 42% (92/217)
Receiving objects: 43% (94/217)
Receiving objects: 44% (96/217)
Receiving objects: 45% (98/217)
Receiving objects: 46% (100/217)
Receiving objects: 47% (102/217)
Receiving objects: 48% (105/217)
Receiving objects: 49% (107/217)
Receiving objects: 50% (109/217)
Receiving objects: 51% (111/217)
Receiving objects: 52% (113/217)
Receiving objects: 53% (116/217)
Receiving objects: 54% (118/217)
Receiving objects: 55% (120/217)
Receiving objects: 56% (122/217)
Receiving objects: 57% (124/217)
Receiving objects: 58% (126/217)
Receiving objects: 59% (129/217)
Receiving objects: 60% (131/217)
Receiving objects: 61% (133/217)
Receiving objects: 62% (135/217)
Receiving objects: 63% (137/217)
Receiving objects: 64% (139/217)
Receiving objects: 65% (142/217)
Receiving objects: 66% (144/217)
Receiving objects: 67% (146/217)
Receiving objects: 68% (148/217)
Receiving objects: 69% (150/217)
Receiving objects: 70% (152/217)
Receiving objects: 71% (155/217)
Receiving objects: 72% (157/217)
Receiving objects: 73% (159/217)
Receiving objects: 74% (161/217)
Receiving objects: 75% (163/217)
Receiving objects: 76% (165/217)
Receiving objects: 77% (168/217)
Receiving objects: 78% (170/217)
Receiving objects: 79% (172/217)
Receiving objects: 80% (174/217)
Receiving objects: 81% (176/217)
Receiving objects: 82% (178/217)
Receiving objects: 83% (181/217)
Receiving objects: 84% (183/217)
Receiving objects: 85% (185/217)
Receiving objects: 86% (187/217)
Receiving objects: 87% (189/217)
Receiving objects: 88% (191/217)
Receiving objects: 89% (194/217)
Receiving objects: 90% (196/217)
Receiving objects: 91% (198/217)
Receiving objects: 92% (200/217)
Receiving objects: 93% (202/217)
Receiving objects: 94% (204/217)
Receiving objects: 95% (207/217)
Receiving objects: 96% (209/217)
Receiving objects: 97% (211/217)
Receiving objects: 98% (213/217)
Receiving objects: 99% (215/217)
remote: Total 217 (delta 119), reused 148 (delta 93), pack-reused 6
Receiving objects: 100% (217/217)
Receiving objects: 100% (217/217), 910.10 KiB | 8.83 MiB/s, done.
Resolving deltas: 0% (0/119)
Resolving deltas: 1% (2/119)
Resolving deltas: 2% (3/119)
Resolving deltas: 3% (4/119)
Resolving deltas: 4% (5/119)
Resolving deltas: 5% (6/119)
Resolving deltas: 6% (8/119)
Resolving deltas: 7% (9/119)
Resolving deltas: 8% (10/119)
Resolving deltas: 9% (11/119)
Resolving deltas: 10% (12/119)
Resolving deltas: 11% (14/119)
Resolving deltas: 12% (15/119)
Resolving deltas: 13% (16/119)
Resolving deltas: 14% (17/119)
Resolving deltas: 15% (18/119)
Resolving deltas: 16% (20/119)
Resolving deltas: 17% (21/119)
Resolving deltas: 18% (22/119)
Resolving deltas: 19% (23/119)
Resolving deltas: 20% (24/119)
Resolving deltas: 21% (25/119)
Resolving deltas: 22% (27/119)
Resolving deltas: 23% (28/119)
Resolving deltas: 24% (29/119)
Resolving deltas: 25% (30/119)
Resolving deltas: 26% (31/119)
Resolving deltas: 27% (33/119)
Resolving deltas: 28% (34/119)
Resolving deltas: 29% (35/119)
Resolving deltas: 30% (36/119)
Resolving deltas: 31% (37/119)
Resolving deltas: 32% (39/119)
Resolving deltas: 33% (40/119)
Resolving deltas: 34% (41/119)
Resolving deltas: 35% (42/119)
Resolving deltas: 36% (43/119)
Resolving deltas: 37% (45/119)
Resolving deltas: 38% (46/119)
Resolving deltas: 39% (47/119)
Resolving deltas: 40% (48/119)
Resolving deltas: 41% (49/119)
Resolving deltas: 42% (50/119)
Resolving deltas: 43% (52/119)
Resolving deltas: 44% (53/119)
Resolving deltas: 45% (54/119)
Resolving deltas: 46% (55/119)
Resolving deltas: 47% (57/119)
Resolving deltas: 48% (58/119)
Resolving deltas: 49% (59/119)
Resolving deltas: 50% (60/119)
Resolving deltas: 51% (61/119)
Resolving deltas: 52% (62/119)
Resolving deltas: 53% (64/119)
Resolving deltas: 54% (65/119)
Resolving deltas: 55% (66/119)
Resolving deltas: 56% (67/119)
Resolving deltas: 57% (68/119)
Resolving deltas: 58% (70/119)
Resolving deltas: 59% (71/119)
Resolving deltas: 60% (72/119)
Resolving deltas: 61% (73/119)
Resolving deltas: 62% (74/119)
Resolving deltas: 63% (75/119)
Resolving deltas: 64% (77/119)
Resolving deltas: 65% (78/119)
Resolving deltas: 66% (79/119)
Resolving deltas: 67% (80/119)
Resolving deltas: 68% (81/119)
Resolving deltas: 69% (83/119)
Resolving deltas: 70% (84/119)
Resolving deltas: 71% (85/119)
Resolving deltas: 72% (86/119)
Resolving deltas: 73% (87/119)
Resolving deltas: 74% (89/119)
Resolving deltas: 75% (90/119)
Resolving deltas: 76% (91/119)
Resolving deltas: 77% (92/119)
Resolving deltas: 78% (93/119)
Resolving deltas: 79% (95/119)
Resolving deltas: 80% (96/119)
Resolving deltas: 81% (97/119)
Resolving deltas: 82% (98/119)
Resolving deltas: 83% (99/119)
Resolving deltas: 84% (100/119)
Resolving deltas: 85% (102/119)
Resolving deltas: 86% (103/119)
Resolving deltas: 87% (104/119)
Resolving deltas: 88% (105/119)
Resolving deltas: 89% (106/119)
Resolving deltas: 90% (108/119)
Resolving deltas: 91% (109/119)
Resolving deltas: 92% (110/119)
Resolving deltas: 93% (111/119)
Resolving deltas: 94% (112/119)
Resolving deltas: 95% (114/119)
Resolving deltas: 96% (115/119)
Resolving deltas: 97% (116/119)
Resolving deltas: 98% (117/119)
Resolving deltas: 99% (118/119)
Resolving deltas: 100% (119/119)
Resolving deltas: 100% (119/119), completed with 42 local objects.
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '67d140dba72dc2cb661d55878384464de46719e7'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 67d140dba7 gh-83925: Make asyncio.subprocess communicate similar to non-asyncio (#18650) Switched to and reset branch 'main'
find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2711: clean-retain-profile] Error 1 (ignored) Objects/obmalloc.c:886:1: warning: ‘always_inline’ function might not be inlinable [-Wattributes] 886 | arena_map_get(OMState *state, pymem_block *p, int create) | ^~~~~~~~~~~~~ Objects/obmalloc.c:886:1: warning: ‘always_inline’ function might not be inlinable [-Wattributes] 886 | arena_map_get(OMState *state, pymem_block *p, int create) | ^~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^
Timeout (0:15:00)! Thread 0x000003ff96f77080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2075 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1207 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1106 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1232 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 281 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 317 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 360 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 235 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 265 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:1956: buildbottest] Error 1
Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload
Test report
Failed tests:
- test_tools
Sincerely, -The Buildbot
participants (1)
-
buildbot@python.org