☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)
The Buildbot has detected a new failure on builder PPC64LE RHEL8 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/559/builds/3499
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-RHEL8-ppc64le
Build Reason: <unknown> Blamelist: Alex Waygood <Alex.Waygood@Gmail.com>, Alexey Namyotkin <62434915+nametkin@users.noreply.github.com>, Barney Gale <barney.gale@gmail.com>, Ben Kallus <49924171+kenballus@users.noreply.github.com>, Brandt Bucher <brandtbucher@microsoft.com>, Carey Metcalfe <carey@cmetcalfe.ca>, Carl Meyer <carl@oddbird.net>, Charles Machalow <csm10495@gmail.com>, Cheryl Sabella <cheryl.sabella@gmail.com>, Christian Heimes <christian@python.org>, Christopher Chavez <chrischavez@gmx.us>, Cristián Maureira-Fredes <cmaureir@users.noreply.github.com>, Dong-hee Na <donghee.na@python.org>, Eric Snow <ericsnowcurrently@gmail.com>, Erlend E. Aasland <erlend.aasland@protonmail.com>, Furkan Onder <furkanonder@protonmail.com>, Gregory P. Smith <greg@krypto.org>, Gregory Szorc <gregory.szorc@gmail.com>, Guido van Rossum <guido@python.org>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Illia Volochii <illia.volochii@gmail.com>, Irit Katriel <1055913+iritkatriel@users.noreply.github.com>, Jelle Zi jlstra <jelle.zijlstra@gmail.com>, Jesper Noordsij <45041769+jnoordsij@users.noreply.github.com>, Jurica Bradarić <jbradaric@users.noreply.github.com>, Kirill Podoprigora <kirill.bast9@mail.ru>, Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>, Luccccifer <lukezhang764@gmail.com>, Mark Shannon <mark@hotpy.org>, Marta Gómez Macías <mgmacias@google.com>, Matthias Görgens <matthias.goergens@gmail.com>, Ned Batchelder <ned@nedbatchelder.com>, Ned Deily <nad@python.org>, Nikita Sobolev <mail@sobolevn.me>, Nyakku Shigure <sigure.qaq@gmail.com>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Paul Ganssle <1377457+pganssle@users.noreply.github.com>, Prince Roshan <princekrroshan01@gmail.com>, Ronald Oussoren <ronaldoussoren@mac.com>, Sam Bull <git@sambull.org>, Serhiy Storchaka <storchaka@gmail.com>, Soumendra Ganguly <67527439+8vasu@users.noreply.github.com>, Terry Jan Reedy <tjreedy@udel.edu>, Thomas Hisch <t.hisch@gmail.com>, William Sawyer <wmsawyer2609@gmail.com>, Youf u Zhang <1315097+zhangyoufu@users.noreply.github.com>, Zac Hatfield-Dodds <zac.hatfield.dodds@gmail.com>, chgnrdv <52372310+chgnrdv@users.noreply.github.com>, cptpcrd <31829097+cptpcrd@users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>, gsallam <123525874+gsallam@users.noreply.github.com>, han-solo <hanish0019@gmail.com>, partev <petrosyan@gmail.com>, thirumurugan <67573527+thirumurugan-git@users.noreply.github.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 7, done.
remote: Counting objects: 14% (1/7)
remote: Counting objects: 28% (2/7)
remote: Counting objects: 42% (3/7)
remote: Counting objects: 57% (4/7)
remote: Counting objects: 71% (5/7)
remote: Counting objects: 85% (6/7)
remote: Counting objects: 100% (7/7)
remote: Counting objects: 100% (7/7), done.
remote: Total 7 (delta 6), reused 7 (delta 6), pack-reused 0
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '0a7796052acb9cec8b13f8d0a5f304f56f26ec5b'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 0a7796052a gh-102856: Allow comments inside multi-line f-string expresions (#104006) Switched to and reset branch 'main'
Timeout (0:15:00)! Thread 0x00007fff9f7c4d70 (most recent call first): File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/selectors.py", line 415 in select File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/subprocess.py", line 2108 in _communicate File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/subprocess.py", line 1209 in communicate File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/test_gdb.py", line 112 in run_gdb File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/test_gdb.py", line 229 in get_stack_trace File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/test_gdb.py", line 936 in test_pycfunction File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/case.py", line 634 in run File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/case.py", line 690 in __call__ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 122 in run File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 122 in run File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 122 in run File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/unittest/runner.py", line 240 in run File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/test/__main__.py", line 2 in <module> File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/runpy.py", line 88 in _run_code File "/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/Lib/runpy.py", line 198 in _run_module_as_main make: *** [Makefile:1981: buildbottest] Error 1
Cannot open file '/home/buildbot/buildarea/3.x.cstratak-RHEL8-ppc64le/build/build_oot/test-results.xml' for upload
Test report
Failed tests:
- test_gdb
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/484/builds/3363
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: pablogsal-arch-x86_64
Build Reason: <unknown> Blamelist: Cristián Maureira-Fredes <cmaureir@users.noreply.github.com>, Ned Deily <nad@python.org>, Serhiy Storchaka <storchaka@gmail.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 15, done.
remote: Counting objects: 6% (1/15)
remote: Counting objects: 13% (2/15)
remote: Counting objects: 20% (3/15)
remote: Counting objects: 26% (4/15)
remote: Counting objects: 33% (5/15)
remote: Counting objects: 40% (6/15)
remote: Counting objects: 46% (7/15)
remote: Counting objects: 53% (8/15)
remote: Counting objects: 60% (9/15)
remote: Counting objects: 66% (10/15)
remote: Counting objects: 73% (11/15)
remote: Counting objects: 80% (12/15)
remote: Counting objects: 86% (13/15)
remote: Counting objects: 93% (14/15)
remote: Counting objects: 100% (15/15)
remote: Counting objects: 100% (15/15), done.
remote: Compressing objects: 10% (1/10)
remote: Compressing objects: 20% (2/10)
remote: Compressing objects: 30% (3/10)
remote: Compressing objects: 40% (4/10)
remote: Compressing objects: 50% (5/10)
remote: Compressing objects: 60% (6/10)
remote: Compressing objects: 70% (7/10)
remote: Compressing objects: 80% (8/10)
remote: Compressing objects: 90% (9/10)
remote: Compressing objects: 100% (10/10)
remote: Compressing objects: 100% (10/10), done.
remote: Total 15 (delta 5), reused 7 (delta 5), pack-reused 0
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '0a7796052acb9cec8b13f8d0a5f304f56f26ec5b'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 0a7796052a gh-102856: Allow comments inside multi-line f-string expresions (#104006) Switched to and reset branch 'main'
Objects/object.c:2211: _Py_ForgetReference: Assertion failed: invalid object chain Enable tracemalloc to get the memory block allocation traceback
Objects/object.c:2211: _Py_ForgetReference: Assertion failedobject address : 0x7f06593a3420 object refcount : 0 : invalid object chain Enable tracemalloc to get the memory block allocation traceback
object type : 0x55e2692ff300 object type name: int object repr : object address : 0x7f06582cdf00 object refcount : 0 object type : 0x55e26930abc0 object type name: str object repr : <refcnt 0 at 0x7f06593a3420>
Fatal Python error: _PyObject_AssertFailed: _PyObject_AssertFailed <refcnt 0 at 0x7f06582cdf00>Python runtime state: initialized
Thread 0x00007f06699656c0 (most recent call first): File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 37 in _run_output File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 424 in f File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.pyFatal Python error: "Aborted, line
989 in Current thread 0xrun 00007f066a7ee740 File (most recent call first): "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py <no Python frame> ", line 1052 in _bootstrap_inner File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1009 in _bootstrap
Current thread 0x00007f066a7ee740 (most recent call first): File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1471 in current_thread File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1122 in join File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 433 in test_in_threaded_subinterpreter File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 634 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 690 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__ File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/runner.py", line 240 in run File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 783 in _main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 738 in main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 802 in main File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/__main__.py", line 2 in <module> File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 88 in _run_code File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 198 in _run_module_as_main
Extension modules: _testcapi Extension modules: _testcapi, _xxsubinterpreters (total: 2) , _xxsubinterpretersmake: *** [Makefile:1981: buildbottest] Aborted (core dumped)
Cannot open file '/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/test-results.xml' for upload
Test report
Failed tests:
- test__xxsubinterpreters
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/545/builds/3846
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-z
Build Reason: <unknown> Blamelist: Alex Henrie <alexhenrie24@gmail.com>, Alex Waygood <Alex.Waygood@Gmail.com>, Alexey Namyotkin <62434915+nametkin@users.noreply.github.com>, Barney Gale <barney.gale@gmail.com>, Ben Kallus <49924171+kenballus@users.noreply.github.com>, Brandt Bucher <brandtbucher@microsoft.com>, Carey Metcalfe <carey@cmetcalfe.ca>, Carl Meyer <carl@oddbird.net>, Charles Machalow <csm10495@gmail.com>, Cheryl Sabella <cheryl.sabella@gmail.com>, Christian Heimes <christian@python.org>, Christopher Chavez <chrischavez@gmx.us>, Cristián Maureira-Fredes <cmaureir@users.noreply.github.com>, Dong-hee Na <donghee.na@python.org>, Eric Snow <ericsnowcurrently@gmail.com>, Erlend E. Aasland <erlend.aasland@protonmail.com>, Furkan Onder <furkanonder@protonmail.com>, Gregory P. Smith <greg@krypto.org>, Gregory Szorc <gregory.szorc@gmail.com>, Guido van Rossum <guido@python.org>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Illia Volochii <illia.volochii@gmail.com>, Irit Katriel <1055913+iritkatri el@users.noreply.github.com>, James Gerity <snoopjedi@gmail.com>, Jelle Zijlstra <jelle.zijlstra@gmail.com>, Jeong, YunWon <69878+youknowone@users.noreply.github.com>, Jesper Noordsij <45041769+jnoordsij@users.noreply.github.com>, Jonathan Protzenko <protz@microsoft.com>, Jurica Bradarić <jbradaric@users.noreply.github.com>, Kirill Podoprigora <kirill.bast9@mail.ru>, Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>, Luccccifer <lukezhang764@gmail.com>, Mark Shannon <mark@hotpy.org>, Marta Gómez Macías <mgmacias@google.com>, Matthias Görgens <matthias.goergens@gmail.com>, Ned Batchelder <ned@nedbatchelder.com>, Ned Deily <nad@python.org>, Nikita Sobolev <mail@sobolevn.me>, Nyakku Shigure <sigure.qaq@gmail.com>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Paul Ganssle <1377457+pganssle@users.noreply.github.com>, Prince Roshan <princekrroshan01@gmail.com>, Ronald Oussoren <ronaldoussoren@mac.com>, Sam Bull <git@sambull.org>, Sebastian Berg <sebastianb@nvidia.com>, S erhiy Storchaka <storchaka@gmail.com>, Soumendra Ganguly <67527439+8vasu@users.noreply.github.com>, Terry Jan Reedy <tjreedy@udel.edu>, Thomas Hisch <t.hisch@gmail.com>, William Sawyer <wmsawyer2609@gmail.com>, Youfu Zhang <1315097+zhangyoufu@users.noreply.github.com>, Zac Hatfield-Dodds <zac.hatfield.dodds@gmail.com>, chgnrdv <52372310+chgnrdv@users.noreply.github.com>, cptpcrd <31829097+cptpcrd@users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>, gsallam <123525874+gsallam@users.noreply.github.com>, han-solo <hanish0019@gmail.com>, partev <petrosyan@gmail.com>, penguin_wwy <940375606@qq.com>, sunmy2019 <59365878+sunmy2019@users.noreply.github.com>, thirumurugan <67573527+thirumurugan-git@users.noreply.github.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 13, done.
remote: Counting objects: 7% (1/13)
remote: Counting objects: 15% (2/13)
remote: Counting objects: 23% (3/13)
remote: Counting objects: 30% (4/13)
remote: Counting objects: 38% (5/13)
remote: Counting objects: 46% (6/13)
remote: Counting objects: 53% (7/13)
remote: Counting objects: 61% (8/13)
remote: Counting objects: 69% (9/13)
remote: Counting objects: 76% (10/13)
remote: Counting objects: 84% (11/13)
remote: Counting objects: 92% (12/13)
remote: Counting objects: 100% (13/13)
remote: Counting objects: 100% (13/13), done.
remote: Compressing objects: 50% (1/2)
remote: Compressing objects: 100% (2/2)
remote: Compressing objects: 100% (2/2), done.
remote: Total 7 (delta 6), reused 6 (delta 5), pack-reused 0
From https://github.com/python/cpython
- branch main -> FETCH_HEAD Note: switching to '0a7796052acb9cec8b13f8d0a5f304f56f26ec5b'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 0a7796052a gh-102856: Allow comments inside multi-line f-string expresions (#104006) Switched to and reset branch 'main'
find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2766: clean-retain-profile] Error 1 (ignored) In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13, inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ ./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d | ~~~~~^~~~~~~~~~~~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘word_to_string’, inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13: ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot); | ^ ./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=] 373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot); | ^
Timeout (0:15:00)! Thread 0x000003ff980f7080 (most recent call first): File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__ File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2 File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module> File "<frozen runpy>", line 88 in _run_code File "<frozen runpy>", line 198 in _run_module_as_main make: *** [Makefile:1977: buildbottest] Error 1
Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload
Test report
Failed tests:
- test_tools
Sincerely, -The Buildbot
participants (1)
-
buildbot＠python.org