Summary of the results of the build (if available):

10 May 2023

      The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/545/builds/3755
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-z
Build Reason: <unknown>
Blamelist: Adam Turner <9087854+AA-Turner@users.noreply.github.com>, Alex Waygood <Alex.Waygood@Gmail.com>, Alexey Namyotkin <62434915+nametkin@users.noreply.github.com>, Amethyst Reese <amethyst@n7.gg>, Anže Pečar <anze@pecar.me>, Arjun <ccldarjun@icloud.com>, Arthur Pastel <arthur.pastel@gmail.com>, Barney Gale <barney.gale@gmail.com>, Barry Warsaw <barry@python.org>, Ben Faulhaber <111227622+faulhaberben@users.noreply.github.com>, Brandt Bucher <brandtbucher@microsoft.com>, Burak Saler <59198732+buraksaler@users.noreply.github.com>, Carey Metcalfe <carey@cmetcalfe.ca>, Carl Meyer <carl@oddbird.net>, Christopher Chavez <chrischavez@gmx.us>, David Foster <david@dafoster.net>, Dong-hee Na <donghee.na@python.org>, Eric Snow <ericsnowcurrently@gmail.com>, Erlend E. Aasland <erlend.aasland@protonmail.com>, Ethan Furman <ethan@stoneleaf.us>, Franek Magiera <framagie@gmail.com>, Gleb Smirnoff <glebius@FreeBSD.org>, Gregory P. Smith <greg@krypto.org>, Hugo van Kemenade <hugovk@users.nore
ply.github.com>, Irit Katriel <1055913+iritkatriel@users.noreply.github.com>, Itamar Ostricher <itamarost@gmail.com>, Jacob Bower <1978924+jbower-fb@users.noreply.github.com>, Jakub Kulík <Kulikjak@gmail.com>, Jelle Zijlstra <jelle.zijlstra@gmail.com>, John Belmonte <john@neggie.net>, JohnJamesUtley <81572567+JohnJamesUtley@users.noreply.github.com>, Jonathan Protzenko <protz@microsoft.com>, Joshua Herman <zitterbewegung@gmail.com>, Juhi Chandalia <jkchandalia@gmail.com>, Jurica Bradarić <jbradaric@users.noreply.github.com>, Ken Jin <kenjin@python.org>, Kevin Krakauer <kevinGC@users.noreply.github.com>, Kirill Podoprigora <80244920+Eclips4@users.noreply.github.com>, Kirill Podoprigora <kirill.bast9@mail.ru>, Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>, Liam Gersten <gerstenliam@gmail.com>, Lysandros Nikolaou <lisandrosnik@gmail.com>, Mariusz Felisiak <felisiak.mariusz@gmail.com>, Mark Shannon <mark@hotpy.org>, Michael Blahay <mblahay@users.noreply.github.com>,
Nathaniel J. Smith <njs@pobox.com>, Nikita Sobolev <mail@sobolevn.me>, Oleg Iarygin <oleg@arhadthedev.net>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Paul Ganssle <1377457+pganssle@users.noreply.github.com>, Paul Ganssle <git@m.ganssle.io>, Petr Viktorin <encukou@gmail.com>, Pieter Eendebak <pieter.eendebak@gmail.com>, Prince Roshan <princekrroshan01@gmail.com>, Rafael Fontenelle <rffontenelle@users.noreply.github.com>, Sam Carroll <70000253+samcarroll42@users.noreply.github.com>, Sam Morris <sam@robots.org.uk>, Sebastian Pipping <sebastian@pipping.org>, Serhiy Storchaka <storchaka@gmail.com>, Shantanu <12621235+hauntsaninja@users.noreply.github.com>, Terry Jan Reedy <tjreedy@udel.edu>, Thomas Grainger <tagrain@gmail.com>, Tian Gao <gaogaotiantian@hotmail.com>, Tim Hoffmann <2836374+timhoffm@users.noreply.github.com>, Tomas R <tomas.roun8@gmail.com>, Victor Stinner <vstinner@python.org>, Yuxin Wu <ppwwyyxxc@gmail.com>, Zhang Na <44800775+loongson-zn@users.noreply.github.com>, and
rei kulakov <andrei.avk@gmail.com>, chgnrdv <52372310+chgnrdv@users.noreply.github.com>, jx124 <64946984+jx124@users.noreply.github.com>, samschott <sam.schott@outlook.com>, sunmy2019 <59365878+sunmy2019@users.noreply.github.com>, ymki4360 <132453923+ymki4360@users.noreply.github.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 40, done.

remote: Counting objects:   2% (1/39)

remote: Counting objects:   5% (2/39)

remote: Counting objects:   7% (3/39)

remote: Counting objects:  10% (4/39)

remote: Counting objects:  12% (5/39)

remote: Counting objects:  15% (6/39)

remote: Counting objects:  17% (7/39)

remote: Counting objects:  20% (8/39)

remote: Counting objects:  23% (9/39)

remote: Counting objects:  25% (10/39)

remote: Counting objects:  28% (11/39)

remote: Counting objects:  30% (12/39)

remote: Counting objects:  33% (13/39)

remote: Counting objects:  35% (14/39)

remote: Counting objects:  38% (15/39)

remote: Counting objects:  41% (16/39)

remote: Counting objects:  43% (17/39)

remote: Counting objects:  46% (18/39)

remote: Counting objects:  48% (19/39)

remote: Counting objects:  51% (20/39)

remote: Counting objects:  53% (21/39)

remote: Counting objects:  56% (22/39)

remote: Counting objects:  58% (23/39)

remote: Counting objects:  61% (24/39)

remote: Counting objects:  64% (25/39)

remote: Counting objects:  66% (26/39)

remote: Counting objects:  69% (27/39)

remote: Counting objects:  71% (28/39)

remote: Counting objects:  74% (29/39)

remote: Counting objects:  76% (30/39)

remote: Counting objects:  79% (31/39)

remote: Counting objects:  82% (32/39)

remote: Counting objects:  84% (33/39)

remote: Counting objects:  87% (34/39)

remote: Counting objects:  89% (35/39)

remote: Counting objects:  92% (36/39)

remote: Counting objects:  94% (37/39)

remote: Counting objects:  97% (38/39)

remote: Counting objects: 100% (39/39)

remote: Counting objects: 100% (39/39), done.

remote: Compressing objects:   4% (1/25)

remote: Compressing objects:   8% (2/25)

remote: Compressing objects:  12% (3/25)

remote: Compressing objects:  16% (4/25)

remote: Compressing objects:  20% (5/25)

remote: Compressing objects:  24% (6/25)

remote: Compressing objects:  28% (7/25)

remote: Compressing objects:  32% (8/25)

remote: Compressing objects:  36% (9/25)

remote: Compressing objects:  40% (10/25)

remote: Compressing objects:  44% (11/25)

remote: Compressing objects:  48% (12/25)

remote: Compressing objects:  52% (13/25)

remote: Compressing objects:  56% (14/25)

remote: Compressing objects:  60% (15/25)

remote: Compressing objects:  64% (16/25)

remote: Compressing objects:  68% (17/25)

remote: Compressing objects:  72% (18/25)

remote: Compressing objects:  76% (19/25)

remote: Compressing objects:  80% (20/25)

remote: Compressing objects:  84% (21/25)

remote: Compressing objects:  88% (22/25)

remote: Compressing objects:  92% (23/25)

remote: Compressing objects:  96% (24/25)

remote: Compressing objects: 100% (25/25)

remote: Compressing objects: 100% (25/25), done.

remote: Total 40 (delta 17), reused 23 (delta 14), pack-reused 1

From https://github.com/python/cpython

branch                  main       -> FETCH_HEAD
Note: switching to 'ce8d3db25660b029fa589a2072f4daf2a8723c50'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at ce8d3db256 gh-101819: Adapt _io._BufferedIOBase_Type methods to Argument Clinic (#104355)
Switched to and reset branch 'main'
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:2713: clean-retain-profile] Error 1 (ignored)
Objects/obmalloc.c:886:1: warning: ‘always_inline’ function might not be inlinable [-Wattributes]
886 | arena_map_get(OMState *state, pymem_block *p, int create)
| ^~~~~~~~~~~~~
Objects/obmalloc.c:886:1: warning: ‘always_inline’ function might not be inlinable [-Wattributes]
886 | arena_map_get(OMState *state, pymem_block *p, int create)
| ^~~~~~~~~~~~~
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13,
inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18:
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13:
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13:
./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
359 |     case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
358 |     case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
359 |     case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
360 |     case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
357 |     case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
356 |     case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
357 |     case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
358 |     case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
361 |     case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
360 |     case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
361 |     case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
362 |     case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
363 |     case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
362 |     case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
363 |     case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
365 |     case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
366 |     case 9:  EXTRACT_DIGIT(s, x, 100000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
365 |     case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
366 |     case 9:  EXTRACT_DIGIT(s, x, 100000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
367 |     case 8:  EXTRACT_DIGIT(s, x, 10000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
368 |     case 7:  EXTRACT_DIGIT(s, x, 1000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
367 |     case 8:  EXTRACT_DIGIT(s, x, 10000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
368 |     case 7:  EXTRACT_DIGIT(s, x, 1000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
369 |     case 6:  EXTRACT_DIGIT(s, x, 100000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
370 |     case 5:  EXTRACT_DIGIT(s, x, 10000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
369 |     case 6:  EXTRACT_DIGIT(s, x, 100000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
370 |     case 5:  EXTRACT_DIGIT(s, x, 10000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
371 |     case 4:  EXTRACT_DIGIT(s, x, 1000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
372 |     case 3:  EXTRACT_DIGIT(s, x, 100UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
373 |     case 2:  EXTRACT_DIGIT(s, x, 10UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
371 |     case 4:  EXTRACT_DIGIT(s, x, 1000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
372 |     case 3:  EXTRACT_DIGIT(s, x, 100UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
373 |     case 2:  EXTRACT_DIGIT(s, x, 10UL, dot);
|              ^
Timeout (0:15:00)!
Thread 0x000003ff9fe77080 (most recent call first):
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2075 in _communicate
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1207 in communicate
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 198 in freeze
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1106 in _run_suite
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1232 in run_unittest
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module>
File "<frozen runpy>", line 88 in _run_code
File "<frozen runpy>", line 198 in _run_module_as_main
make: *** [Makefile:1958: buildbottest] Error 1
Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload
Test report
Failed tests:

test_tools

Sincerely,
-The Buildbot

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)

buildbot＠python.org

Summary of the results of the build (if available):

Captured traceback

Test report

tags

participants (1)