The Buildbot has detected a new failure on builder aarch64 Fedora Stable Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1153/builds/272

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: cstratak-fedora-stable-aarch64

Build Reason: <unknown> Blamelist:

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 45, done.
remote: Counting objects: 2% (1/44)
remote: Counting objects: 4% (2/44)
remote: Counting objects: 6% (3/44)
remote: Counting objects: 9% (4/44)
remote: Counting objects: 11% (5/44)
remote: Counting objects: 13% (6/44)
remote: Counting objects: 15% (7/44)
remote: Counting objects: 18% (8/44)
remote: Counting objects: 20% (9/44)
remote: Counting objects: 22% (10/44)
remote: Counting objects: 25% (11/44)
remote: Counting objects: 27% (12/44)
remote: Counting objects: 29% (13/44)
remote: Counting objects: 31% (14/44)
remote: Counting objects: 34% (15/44)
remote: Counting objects: 36% (16/44)
remote: Counting objects: 38% (17/44)
remote: Counting objects: 40% (18/44)
remote: Counting objects: 43% (19/44)
remote: Counting objects: 45% (20/44)
remote: Counting objects: 47% (21/44)
remote: Counting objects: 50% (22/44)
remote: Counting objects: 52% (23/44)
remote: Counting objects: 54% (24/44)
remote: Counting objects: 56% (25/44)
remote: Counting objects: 59% (26/44)
remote: Counting objects: 61% (27/44)
remote: Counting objects: 63% (28/44)
remote: Counting objects: 65% (29/44)
remote: Counting objects: 68% (30/44)
remote: Counting objects: 70% (31/44)
remote: Counting objects: 72% (32/44)
remote: Counting objects: 75% (33/44)
remote: Counting objects: 77% (34/44)
remote: Counting objects: 79% (35/44)
remote: Counting objects: 81% (36/44)
remote: Counting objects: 84% (37/44)
remote: Counting objects: 86% (38/44)
remote: Counting objects: 88% (39/44)
remote: Counting objects: 90% (40/44)
remote: Counting objects: 93% (41/44)
remote: Counting objects: 95% (42/44)
remote: Counting objects: 97% (43/44)
remote: Counting objects: 100% (44/44)
remote: Counting objects: 100% (44/44), done.
remote: Compressing objects: 2% (1/36)
remote: Compressing objects: 5% (2/36)
remote: Compressing objects: 8% (3/36)
remote: Compressing objects: 11% (4/36)
remote: Compressing objects: 13% (5/36)
remote: Compressing objects: 16% (6/36)
remote: Compressing objects: 19% (7/36)
remote: Compressing objects: 22% (8/36)
remote: Compressing objects: 25% (9/36)
remote: Compressing objects: 27% (10/36)
remote: Compressing objects: 30% (11/36)
remote: Compressing objects: 33% (12/36)
remote: Compressing objects: 36% (13/36)
remote: Compressing objects: 38% (14/36)
remote: Compressing objects: 41% (15/36)
remote: Compressing objects: 44% (16/36)
remote: Compressing objects: 47% (17/36)
remote: Compressing objects: 50% (18/36)
remote: Compressing objects: 52% (19/36)
remote: Compressing objects: 55% (20/36)
remote: Compressing objects: 58% (21/36)
remote: Compressing objects: 61% (22/36)
remote: Compressing objects: 63% (23/36)
remote: Compressing objects: 66% (24/36)
remote: Compressing objects: 69% (25/36)
remote: Compressing objects: 72% (26/36)
remote: Compressing objects: 75% (27/36)
remote: Compressing objects: 77% (28/36)
remote: Compressing objects: 80% (29/36)
remote: Compressing objects: 83% (30/36)
remote: Compressing objects: 86% (31/36)
remote: Compressing objects: 88% (32/36)
remote: Compressing objects: 91% (33/36)
remote: Compressing objects: 94% (34/36)
remote: Compressing objects: 97% (35/36)
remote: Compressing objects: 100% (36/36)
remote: Compressing objects: 100% (36/36), done.
remote: Total 45 (delta 21), reused 19 (delta 8), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: switching to 'FETCH_HEAD'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c <new-branch-name>

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at f1c1afd45b [3.12] gh-86291: linecache: get module name from __spec__ if available (GH-22908) (GH-115731) Switched to and reset branch '3.12'

Objects/longobject.c: In function ‘long_format_binary’: Objects/longobject.c:2122:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 2122 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1998:9: note: ‘kind’ was declared here 1998 | int kind; | ^~~~ Objects/longobject.c: In function ‘long_to_decimal_string_internal’: Objects/longobject.c:1945:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 1945 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1769:9: note: ‘kind’ was declared here 1769 | int kind; | ^~~~

make: *** [Makefile:2019: buildbottest] Error 2

Test report

Failed tests:

• test_typing

Test leaking resources:

• test_typing: memory blocks

Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7 Refleaks 3.12 while building Python. Full details are available at: https://buildbot.python.org/all/#/builders/1177/builds/271

Buildbot URL: https://buildbot.python.org/all/

Worker for this Build: cstratak-RHEL7-x86_64

Build Reason: <unknown> Blamelist:

BUILD FAILED: failed test (failure)

Summary of the results of the build (if available):

==

Captured traceback

remote: Enumerating objects: 45, done.
remote: Counting objects: 2% (1/44)
remote: Counting objects: 4% (2/44)
remote: Counting objects: 6% (3/44)
remote: Counting objects: 9% (4/44)
remote: Counting objects: 11% (5/44)
remote: Counting objects: 13% (6/44)
remote: Counting objects: 15% (7/44)
remote: Counting objects: 18% (8/44)
remote: Counting objects: 20% (9/44)
remote: Counting objects: 22% (10/44)
remote: Counting objects: 25% (11/44)
remote: Counting objects: 27% (12/44)
remote: Counting objects: 29% (13/44)
remote: Counting objects: 31% (14/44)
remote: Counting objects: 34% (15/44)
remote: Counting objects: 36% (16/44)
remote: Counting objects: 38% (17/44)
remote: Counting objects: 40% (18/44)
remote: Counting objects: 43% (19/44)
remote: Counting objects: 45% (20/44)
remote: Counting objects: 47% (21/44)
remote: Counting objects: 50% (22/44)
remote: Counting objects: 52% (23/44)
remote: Counting objects: 54% (24/44)
remote: Counting objects: 56% (25/44)
remote: Counting objects: 59% (26/44)
remote: Counting objects: 61% (27/44)
remote: Counting objects: 63% (28/44)
remote: Counting objects: 65% (29/44)
remote: Counting objects: 68% (30/44)
remote: Counting objects: 70% (31/44)
remote: Counting objects: 72% (32/44)
remote: Counting objects: 75% (33/44)
remote: Counting objects: 77% (34/44)
remote: Counting objects: 79% (35/44)
remote: Counting objects: 81% (36/44)
remote: Counting objects: 84% (37/44)
remote: Counting objects: 86% (38/44)
remote: Counting objects: 88% (39/44)
remote: Counting objects: 90% (40/44)
remote: Counting objects: 93% (41/44)
remote: Counting objects: 95% (42/44)
remote: Counting objects: 97% (43/44)
remote: Counting objects: 100% (44/44)
remote: Counting objects: 100% (44/44), done.
remote: Compressing objects: 2% (1/36)
remote: Compressing objects: 5% (2/36)
remote: Compressing objects: 8% (3/36)
remote: Compressing objects: 11% (4/36)
remote: Compressing objects: 13% (5/36)
remote: Compressing objects: 16% (6/36)
remote: Compressing objects: 19% (7/36)
remote: Compressing objects: 22% (8/36)
remote: Compressing objects: 25% (9/36)
remote: Compressing objects: 27% (10/36)
remote: Compressing objects: 30% (11/36)
remote: Compressing objects: 33% (12/36)
remote: Compressing objects: 36% (13/36)
remote: Compressing objects: 38% (14/36)
remote: Compressing objects: 41% (15/36)
remote: Compressing objects: 44% (16/36)
remote: Compressing objects: 47% (17/36)
remote: Compressing objects: 50% (18/36)
remote: Compressing objects: 52% (19/36)
remote: Compressing objects: 55% (20/36)
remote: Compressing objects: 58% (21/36)
remote: Compressing objects: 61% (22/36)
remote: Compressing objects: 63% (23/36)
remote: Compressing objects: 66% (24/36)
remote: Compressing objects: 69% (25/36)
remote: Compressing objects: 72% (26/36)
remote: Compressing objects: 75% (27/36)
remote: Compressing objects: 77% (28/36)
remote: Compressing objects: 80% (29/36)
remote: Compressing objects: 83% (30/36)
remote: Compressing objects: 86% (31/36)
remote: Compressing objects: 88% (32/36)
remote: Compressing objects: 91% (33/36)
remote: Compressing objects: 94% (34/36)
remote: Compressing objects: 97% (35/36)
remote: Compressing objects: 100% (36/36)
remote: Compressing objects: 100% (36/36), done.
remote: Total 45 (delta 21), reused 19 (delta 8), pack-reused 1
From https://github.com/python/cpython

• branch 3.12 -> FETCH_HEAD Note: checking out 'FETCH_HEAD'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at f1c1afd... [3.12] gh-86291: linecache: get module name from __spec__ if available (GH-22908) (GH-115731) Switched to and reset branch '3.12'

make: *** [Makefile:2013: buildbottest] Error 2

Test report

Failed tests:

• test_typing

Test leaking resources:

• test_typing: memory blocks

Sincerely, -The Buildbot