Summary of the results of the build (if available):

22 May 2023

      The Buildbot has detected a new failure on builder s390x Fedora LTO + PGO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/545/builds/3839
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-z
Build Reason: <unknown>
Blamelist: Alex Henrie <alexhenrie24@gmail.com>, Alex Waygood <Alex.Waygood@Gmail.com>, Alexey Namyotkin <62434915+nametkin@users.noreply.github.com>, Barney Gale <barney.gale@gmail.com>, Ben Kallus <49924171+kenballus@users.noreply.github.com>, Brandt Bucher <brandtbucher@microsoft.com>, Carey Metcalfe <carey@cmetcalfe.ca>, Carl Meyer <carl@oddbird.net>, Charles Machalow <csm10495@gmail.com>, Cheryl Sabella <cheryl.sabella@gmail.com>, Christian Heimes <christian@python.org>, Christopher Chavez <chrischavez@gmx.us>, David Foster <david@dafoster.net>, Dong-hee Na <donghee.na@python.org>, Eric Snow <ericsnowcurrently@gmail.com>, Erlend E. Aasland <erlend.aasland@protonmail.com>, Furkan Onder <furkanonder@protonmail.com>, Gregory P. Smith <greg@krypto.org>, Gregory Szorc <gregory.szorc@gmail.com>, Guido van Rossum <guido@python.org>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Illia Volochii <illia.volochii@gmail.com>, Irit Katriel <1055913+iritkatriel@users.noreply.github.com>
, Jacob Bower <1978924+jbower-fb@users.noreply.github.com>, Jakub Kulík <Kulikjak@gmail.com>, James Gerity <snoopjedi@gmail.com>, Jelle Zijlstra <jelle.zijlstra@gmail.com>, Jeong, YunWon <69878+youknowone@users.noreply.github.com>, Jesper Noordsij <45041769+jnoordsij@users.noreply.github.com>, JohnJamesUtley <81572567+JohnJamesUtley@users.noreply.github.com>, Jonathan Protzenko <protz@microsoft.com>, Jurica Bradarić <jbradaric@users.noreply.github.com>, Kirill Podoprigora <kirill.bast9@mail.ru>, Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>, Mark Shannon <mark@hotpy.org>, Marta Gómez Macías <mgmacias@google.com>, Matthias Görgens <matthias.goergens@gmail.com>, Ned Batchelder <ned@nedbatchelder.com>, Nikita Sobolev <mail@sobolevn.me>, Nyakku Shigure <sigure.qaq@gmail.com>, Pablo Galindo Salgado <Pablogsal@gmail.com>, Paul Ganssle <1377457+pganssle@users.noreply.github.com>, Prince Roshan <princekrroshan01@gmail.com>, Ronald Oussoren <ronaldoussoren@mac.com>, Sa
m Bull <git@sambull.org>, Sam Carroll <70000253+samcarroll42@users.noreply.github.com>, Sebastian Berg <sebastianb@nvidia.com>, Serhiy Storchaka <storchaka@gmail.com>, Soumendra Ganguly <67527439+8vasu@users.noreply.github.com>, Terry Jan Reedy <tjreedy@udel.edu>, Thomas Hisch <t.hisch@gmail.com>, William Sawyer <wmsawyer2609@gmail.com>, Youfu Zhang <1315097+zhangyoufu@users.noreply.github.com>, Zac Hatfield-Dodds <zac.hatfield.dodds@gmail.com>, chgnrdv <52372310+chgnrdv@users.noreply.github.com>, cptpcrd <31829097+cptpcrd@users.noreply.github.com>, dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>, gsallam <123525874+gsallam@users.noreply.github.com>, han-solo <hanish0019@gmail.com>, partev <petrosyan@gmail.com>, penguin_wwy <940375606@qq.com>, sunmy2019 <59365878+sunmy2019@users.noreply.github.com>, thirumurugan <67573527+thirumurugan-git@users.noreply.github.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 41, done.

remote: Counting objects:   2% (1/40)

remote: Counting objects:   5% (2/40)

remote: Counting objects:   7% (3/40)

remote: Counting objects:  10% (4/40)

remote: Counting objects:  12% (5/40)

remote: Counting objects:  15% (6/40)

remote: Counting objects:  17% (7/40)

remote: Counting objects:  20% (8/40)

remote: Counting objects:  22% (9/40)

remote: Counting objects:  25% (10/40)

remote: Counting objects:  27% (11/40)

remote: Counting objects:  30% (12/40)

remote: Counting objects:  32% (13/40)

remote: Counting objects:  35% (14/40)

remote: Counting objects:  37% (15/40)

remote: Counting objects:  40% (16/40)

remote: Counting objects:  42% (17/40)

remote: Counting objects:  45% (18/40)

remote: Counting objects:  47% (19/40)

remote: Counting objects:  50% (20/40)

remote: Counting objects:  52% (21/40)

remote: Counting objects:  55% (22/40)

remote: Counting objects:  57% (23/40)

remote: Counting objects:  60% (24/40)

remote: Counting objects:  62% (25/40)

remote: Counting objects:  65% (26/40)

remote: Counting objects:  67% (27/40)

remote: Counting objects:  70% (28/40)

remote: Counting objects:  72% (29/40)

remote: Counting objects:  75% (30/40)

remote: Counting objects:  77% (31/40)

remote: Counting objects:  80% (32/40)

remote: Counting objects:  82% (33/40)

remote: Counting objects:  85% (34/40)

remote: Counting objects:  87% (35/40)

remote: Counting objects:  90% (36/40)

remote: Counting objects:  92% (37/40)

remote: Counting objects:  95% (38/40)

remote: Counting objects:  97% (39/40)

remote: Counting objects: 100% (40/40)

remote: Counting objects: 100% (40/40), done.

remote: Compressing objects:   3% (1/32)

remote: Compressing objects:   6% (2/32)

remote: Compressing objects:   9% (3/32)

remote: Compressing objects:  12% (4/32)

remote: Compressing objects:  15% (5/32)

remote: Compressing objects:  18% (6/32)

remote: Compressing objects:  21% (7/32)

remote: Compressing objects:  25% (8/32)

remote: Compressing objects:  28% (9/32)

remote: Compressing objects:  31% (10/32)

remote: Compressing objects:  34% (11/32)

remote: Compressing objects:  37% (12/32)

remote: Compressing objects:  40% (13/32)

remote: Compressing objects:  43% (14/32)

remote: Compressing objects:  46% (15/32)

remote: Compressing objects:  50% (16/32)

remote: Compressing objects:  53% (17/32)

remote: Compressing objects:  56% (18/32)

remote: Compressing objects:  59% (19/32)

remote: Compressing objects:  62% (20/32)

remote: Compressing objects:  65% (21/32)

remote: Compressing objects:  68% (22/32)

remote: Compressing objects:  71% (23/32)

remote: Compressing objects:  75% (24/32)

remote: Compressing objects:  78% (25/32)

remote: Compressing objects:  81% (26/32)

remote: Compressing objects:  84% (27/32)

remote: Compressing objects:  87% (28/32)

remote: Compressing objects:  90% (29/32)

remote: Compressing objects:  93% (30/32)

remote: Compressing objects:  96% (31/32)

remote: Compressing objects: 100% (32/32)

remote: Compressing objects: 100% (32/32), done.

remote: Total 41 (delta 10), reused 25 (delta 8), pack-reused 1

From https://github.com/python/cpython

branch                  main       -> FETCH_HEAD
Note: switching to 'f3466bc04008660c4a5c3ed6f70144f138ae2e7f'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f3466bc040 gh-98836: Extend PyUnicode_FromFormat() (GH-98838)
Switched to and reset branch 'main'
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:2766: clean-retain-profile] Error 1 (ignored)
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13,
inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18:
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13:
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
348 |         if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
|                                   ~~~~~^~~~~~~~~~~~~~~~~~~~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=]
390 |     memcpy(*toP, *fromP, bytesToCopy);
|     ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 |   char buf[1];
|        ^
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13:
./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
359 |     case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
358 |     case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:359:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
359 |     case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
360 |     case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
357 |     case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:356:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
356 |     case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:357:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
357 |     case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:358:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
358 |     case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
361 |     case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:360:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
360 |     case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:361:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
361 |     case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
362 |     case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
363 |     case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:362:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
362 |     case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:363:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
363 |     case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
365 |     case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
366 |     case 9:  EXTRACT_DIGIT(s, x, 100000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:365:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
365 |     case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:366:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
366 |     case 9:  EXTRACT_DIGIT(s, x, 100000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
367 |     case 8:  EXTRACT_DIGIT(s, x, 10000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
368 |     case 7:  EXTRACT_DIGIT(s, x, 1000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:367:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
367 |     case 8:  EXTRACT_DIGIT(s, x, 10000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:368:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
368 |     case 7:  EXTRACT_DIGIT(s, x, 1000000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
369 |     case 6:  EXTRACT_DIGIT(s, x, 100000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
370 |     case 5:  EXTRACT_DIGIT(s, x, 10000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:369:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
369 |     case 6:  EXTRACT_DIGIT(s, x, 100000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:370:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
370 |     case 5:  EXTRACT_DIGIT(s, x, 10000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
371 |     case 4:  EXTRACT_DIGIT(s, x, 1000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
372 |     case 3:  EXTRACT_DIGIT(s, x, 100UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
373 |     case 2:  EXTRACT_DIGIT(s, x, 10UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:371:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
371 |     case 4:  EXTRACT_DIGIT(s, x, 1000UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:372:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
372 |     case 3:  EXTRACT_DIGIT(s, x, 100UL, dot);
|              ^
./Modules/_decimal/libmpdec/io.c:373:14: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
373 |     case 2:  EXTRACT_DIGIT(s, x, 10UL, dot);
|              ^
Timeout (0:15:00)!
Thread 0x000003ff86577080 (most recent call first):
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/selectors.py", line 415 in select
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 2108 in _communicate
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 1209 in communicate
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/subprocess.py", line 550 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 25 in _run_quiet
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Tools/freeze/test/freeze.py", line 197 in freeze
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/test_tools/test_freeze.py", line 28 in test_freeze_simple_script
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 589 in _callTestMethod
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 634 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/case.py", line 690 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 122 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/suite.py", line 84 in __call__
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/unittest/runner.py", line 240 in run
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1115 in _run_suite
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/support/__init__.py", line 1241 in run_unittest
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/runtest.py", line 278 in runtest
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 783 in _main
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 738 in main
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/libregrtest/main.py", line 802 in main
File "/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/Lib/test/__main__.py", line 2 in <module>
File "<frozen runpy>", line 88 in _run_code
File "<frozen runpy>", line 198 in _run_module_as_main
make: *** [Makefile:1977: buildbottest] Error 1
Cannot open file '/home/dje/cpython-buildarea/3.x.edelsohn-fedora-z.lto-pgo/build/test-results.xml' for upload
Test report
Failed tests:

test_tools

Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder AMD64 Arch Linux TraceRefs 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/484/builds/3356
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: pablogsal-arch-x86_64
Build Reason: <unknown>
Blamelist: Erlend E. Aasland <erlend.aasland@protonmail.com>, Hugo van Kemenade <hugovk@users.noreply.github.com>, Serhiy Storchaka <storchaka@gmail.com>
BUILD FAILED: failed test (failure) uploading test-results.xml (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 48, done.

remote: Counting objects:   2% (1/47)

remote: Counting objects:   4% (2/47)

remote: Counting objects:   6% (3/47)

remote: Counting objects:   8% (4/47)

remote: Counting objects:  10% (5/47)

remote: Counting objects:  12% (6/47)

remote: Counting objects:  14% (7/47)

remote: Counting objects:  17% (8/47)

remote: Counting objects:  19% (9/47)

remote: Counting objects:  21% (10/47)

remote: Counting objects:  23% (11/47)

remote: Counting objects:  25% (12/47)

remote: Counting objects:  27% (13/47)

remote: Counting objects:  29% (14/47)

remote: Counting objects:  31% (15/47)

remote: Counting objects:  34% (16/47)

remote: Counting objects:  36% (17/47)

remote: Counting objects:  38% (18/47)

remote: Counting objects:  40% (19/47)

remote: Counting objects:  42% (20/47)

remote: Counting objects:  44% (21/47)

remote: Counting objects:  46% (22/47)

remote: Counting objects:  48% (23/47)

remote: Counting objects:  51% (24/47)

remote: Counting objects:  53% (25/47)

remote: Counting objects:  55% (26/47)

remote: Counting objects:  57% (27/47)

remote: Counting objects:  59% (28/47)

remote: Counting objects:  61% (29/47)

remote: Counting objects:  63% (30/47)

remote: Counting objects:  65% (31/47)

remote: Counting objects:  68% (32/47)

remote: Counting objects:  70% (33/47)

remote: Counting objects:  72% (34/47)

remote: Counting objects:  74% (35/47)

remote: Counting objects:  76% (36/47)

remote: Counting objects:  78% (37/47)

remote: Counting objects:  80% (38/47)

remote: Counting objects:  82% (39/47)

remote: Counting objects:  85% (40/47)

remote: Counting objects:  87% (41/47)

remote: Counting objects:  89% (42/47)

remote: Counting objects:  91% (43/47)

remote: Counting objects:  93% (44/47)

remote: Counting objects:  95% (45/47)

remote: Counting objects:  97% (46/47)

remote: Counting objects: 100% (47/47)

remote: Counting objects: 100% (47/47), done.

remote: Compressing objects:   2% (1/42)

remote: Compressing objects:   4% (2/42)

remote: Compressing objects:   7% (3/42)

remote: Compressing objects:   9% (4/42)

remote: Compressing objects:  11% (5/42)

remote: Compressing objects:  14% (6/42)

remote: Compressing objects:  16% (7/42)

remote: Compressing objects:  19% (8/42)

remote: Compressing objects:  21% (9/42)

remote: Compressing objects:  23% (10/42)

remote: Compressing objects:  26% (11/42)

remote: Compressing objects:  28% (12/42)

remote: Compressing objects:  30% (13/42)

remote: Compressing objects:  33% (14/42)

remote: Compressing objects:  35% (15/42)

remote: Compressing objects:  38% (16/42)

remote: Compressing objects:  40% (17/42)

remote: Compressing objects:  42% (18/42)

remote: Compressing objects:  45% (19/42)

remote: Compressing objects:  47% (20/42)

remote: Compressing objects:  50% (21/42)

remote: Compressing objects:  52% (22/42)

remote: Compressing objects:  54% (23/42)

remote: Compressing objects:  57% (24/42)

remote: Compressing objects:  59% (25/42)

remote: Compressing objects:  61% (26/42)

remote: Compressing objects:  64% (27/42)

remote: Compressing objects:  66% (28/42)

remote: Compressing objects:  69% (29/42)

remote: Compressing objects:  71% (30/42)

remote: Compressing objects:  73% (31/42)

remote: Compressing objects:  76% (32/42)

remote: Compressing objects:  78% (33/42)

remote: Compressing objects:  80% (34/42)

remote: Compressing objects:  83% (35/42)

remote: Compressing objects:  85% (36/42)

remote: Compressing objects:  88% (37/42)

remote: Compressing objects:  90% (38/42)

remote: Compressing objects:  92% (39/42)

remote: Compressing objects:  95% (40/42)

remote: Compressing objects:  97% (41/42)

remote: Compressing objects: 100% (42/42)

remote: Compressing objects: 100% (42/42), done.

remote: Total 48 (delta 13), reused 29 (delta 5), pack-reused 1

From https://github.com/python/cpython

branch                  main       -> FETCH_HEAD
Note: switching to 'f3466bc04008660c4a5c3ed6f70144f138ae2e7f'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f3466bc040 gh-98836: Extend PyUnicode_FromFormat() (GH-98838)
Switched to and reset branch 'main'
Objects/object.c:2211: _Py_ForgetReference: Assertion failed: invalid object chain
Enable tracemalloc to get the memory block allocation traceback
object address  : 0x7f9be5b91b00
object refcount : 0
object type     : 0x558c6f111660
object type name: tuple
object repr     : <refcnt 0 at 0x7f9be5b91b00>
Fatal Python error: _PyObject_AssertFailed: _PyObject_AssertFailed
Python runtime state: initialized
Thread 0x00007f9bf61c06c0 (most recent call first):
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 37 in _run_output
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 424 in f
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 989 in run
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1052 in _bootstrap_inner
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 1009 in _bootstrap
Current thread 0x00007f9bf7049740 (most recent call first):
File "<shim>", line ??? in <interpreter trampoline>
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 631 in wait
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/threading.py", line 976 in start
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/test__xxsubinterpreters.py", line 432 in test_in_threaded_subinterpreter
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 589 in _callTestMethod
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 634 in run
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/case.py", line 690 in __call__
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 122 in run
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/suite.py", line 84 in __call__
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/unittest/runner.py", line 240 in run
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1115 in _run_suite
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/support/__init__.py", line 1241 in run_unittest
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 294 in _test_module
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 330 in _runtest_inner2
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 373 in _runtest_inner
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 248 in _runtest
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/runtest.py", line 278 in runtest
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 365 in rerun_failed_tests
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 783 in _main
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 738 in main
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/libregrtest/main.py", line 802 in main
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/test/__main__.py", line 2 in <module>
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 88 in _run_code
File "/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/Lib/runpy.py", line 198 in _run_module_as_main
Extension modules: _testcapi, _xxsubinterpreters (total: 2)
make: *** [Makefile:1981: buildbottest] Aborted (core dumped)
Cannot open file '/buildbot/buildarea/3.x.pablogsal-arch-x86_64/build/test-results.xml' for upload
Test report
Failed tests:

test__xxsubinterpreters

Sincerely,
-The Buildbot

☠ Buildbot (Python): python/cpython - failed test (failure) uploading test-results.xml (failure) (main)

buildbot＠python.org

Summary of the results of the build (if available):

Captured traceback

Test report

Summary of the results of the build (if available):

Captured traceback

Test report

tags

participants (1)