☠ Buildbot (Python): python/cpython - failed test (failure) (3.11)
The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/947/builds/1066
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>, Serhiy Storchaka <storchaka@gmail.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 65, done.
remote: Counting objects: 2% (1/43)
remote: Counting objects: 4% (2/43)
remote: Counting objects: 6% (3/43)
remote: Counting objects: 9% (4/43)
remote: Counting objects: 11% (5/43)
remote: Counting objects: 13% (6/43)
remote: Counting objects: 16% (7/43)
remote: Counting objects: 18% (8/43)
remote: Counting objects: 20% (9/43)
remote: Counting objects: 23% (10/43)
remote: Counting objects: 25% (11/43)
remote: Counting objects: 27% (12/43)
remote: Counting objects: 30% (13/43)
remote: Counting objects: 32% (14/43)
remote: Counting objects: 34% (15/43)
remote: Counting objects: 37% (16/43)
remote: Counting objects: 39% (17/43)
remote: Counting objects: 41% (18/43)
remote: Counting objects: 44% (19/43)
remote: Counting objects: 46% (20/43)
remote: Counting objects: 48% (21/43)
remote: Counting objects: 51% (22/43)
remote: Counting objects: 53% (23/43)
remote: Counting objects: 55% (24/43)
remote: Counting objects: 58% (25/43)
remote: Counting objects: 60% (26/43)
remote: Counting objects: 62% (27/43)
remote: Counting objects: 65% (28/43)
remote: Counting objects: 67% (29/43)
remote: Counting objects: 69% (30/43)
remote: Counting objects: 72% (31/43)
remote: Counting objects: 74% (32/43)
remote: Counting objects: 76% (33/43)
remote: Counting objects: 79% (34/43)
remote: Counting objects: 81% (35/43)
remote: Counting objects: 83% (36/43)
remote: Counting objects: 86% (37/43)
remote: Counting objects: 88% (38/43)
remote: Counting objects: 90% (39/43)
remote: Counting objects: 93% (40/43)
remote: Counting objects: 95% (41/43)
remote: Counting objects: 97% (42/43)
remote: Counting objects: 100% (43/43)
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 5% (1/17)
remote: Compressing objects: 11% (2/17)
remote: Compressing objects: 17% (3/17)
remote: Compressing objects: 23% (4/17)
remote: Compressing objects: 29% (5/17)
remote: Compressing objects: 35% (6/17)
remote: Compressing objects: 41% (7/17)
remote: Compressing objects: 47% (8/17)
remote: Compressing objects: 52% (9/17)
remote: Compressing objects: 58% (10/17)
remote: Compressing objects: 64% (11/17)
remote: Compressing objects: 70% (12/17)
remote: Compressing objects: 76% (13/17)
remote: Compressing objects: 82% (14/17)
remote: Compressing objects: 88% (15/17)
remote: Compressing objects: 94% (16/17)
remote: Compressing objects: 100% (17/17)
remote: Compressing objects: 100% (17/17), done.
remote: Total 65 (delta 28), reused 28 (delta 26), pack-reused 22
From https://github.com/python/cpython
- branch 3.11 -> FETCH_HEAD Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in ctypes.util._is_elf() (GH-114394) (GH-114445) Switched to and reset branch '3.11'
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 Kill <WorkerThread #5 running test=test_posix pid=2546671 time=25 min> process group Warning -- Failed to wait for <WorkerThread #5 running test=test_posix pid=2546671 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 1959685396, "json_file": {"file": 11, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2546671 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback Kill <WorkerThread #1 running test=test_posix pid=2582292 time=25 min> process group Warning -- Failed to wait for <WorkerThread #1 running test=test_posix pid=2582292 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 1959685396, "json_file": {"file": 4, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2582292 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback make: *** [Makefile:1848: buildbottest] Error 2
Test report
Failed tests:
- test_posix
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1037/builds/1185
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 34, done.
remote: Counting objects: 4% (1/23)
remote: Counting objects: 8% (2/23)
remote: Counting objects: 13% (3/23)
remote: Counting objects: 17% (4/23)
remote: Counting objects: 21% (5/23)
remote: Counting objects: 26% (6/23)
remote: Counting objects: 30% (7/23)
remote: Counting objects: 34% (8/23)
remote: Counting objects: 39% (9/23)
remote: Counting objects: 43% (10/23)
remote: Counting objects: 47% (11/23)
remote: Counting objects: 52% (12/23)
remote: Counting objects: 56% (13/23)
remote: Counting objects: 60% (14/23)
remote: Counting objects: 65% (15/23)
remote: Counting objects: 69% (16/23)
remote: Counting objects: 73% (17/23)
remote: Counting objects: 78% (18/23)
remote: Counting objects: 82% (19/23)
remote: Counting objects: 86% (20/23)
remote: Counting objects: 91% (21/23)
remote: Counting objects: 95% (22/23)
remote: Counting objects: 100% (23/23)
remote: Counting objects: 100% (23/23), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 34 (delta 16), reused 16 (delta 16), pack-reused 11
From https://github.com/python/cpython
- branch 3.11 -> FETCH_HEAD Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in ctypes.util._is_elf() (GH-114394) (GH-114445) Switched to and reset branch '3.11'
find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory find: ‘build’: No such file or directory make[2]: [Makefile:2602: clean-retain-profile] Error 1 (ignored) renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 In file included from Python/bltinmodule.c:6: In function ‘_PyObject_VectorcallTstate’, inlined from ‘_PyObject_VectorcallTstate’ at ./Include/internal/pycore_call.h:77:1, inlined from ‘map_next’ at Python/bltinmodule.c:1371:14: ./Include/internal/pycore_call.h:90:16: warning: ‘small_stack’ may be used uninitialized [-Wmaybe-uninitialized] 90 | return _PyObject_MakeTpCall(tstate, callable, args, nargs, kwnames); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./Include/abstract.h:866, from ./Include/Python.h:100, from Python/bltinmodule.c:3: ./Include/cpython/abstract.h: In function ‘map_next’: ./Include/cpython/abstract.h:47:24: note: by argument 3 of type ‘struct PyObject * const *’ to ‘_PyObject_MakeTpCall’ declared here 47 | PyAPI_FUNC(PyObject *) _PyObject_MakeTpCall( | ^~~~~~~~~~~~~~~~~~~~ Python/bltinmodule.c:1343:15: note: ‘small_stack’ declared here 1343 | PyObject *small_stack[_PY_FASTCALL_SMALL_STACK]; | ^~~~~~~~~~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^~~ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ In function ‘utf8_toUtf8’, inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3, inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9: ./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into a region of size 1 overflows the destination [-Wstringop-overflow=] 390 | memcpy(*toP, *fromP, bytesToCopy); | ^ ./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’: ./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1 1041 | char buf[1]; | ^ renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 Kill <WorkerThread #4 running test=test_posix pid=2511432 time=25 min> process group Warning -- Failed to wait for <WorkerThread #4 running test=test_posix pid=2511432 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 2150061723, "json_file": {"file": 10, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2511432 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback Kill <WorkerThread #1 running test=test_posix pid=2531617 time=25 min> process group Warning -- Failed to wait for <WorkerThread #1 running test=test_posix pid=2531617 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 2150061723, "json_file": {"file": 4, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2531617 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback make: *** [Makefile:1848: buildbottest] Error 2
Test report
Failed tests:
- test_posix
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang Installed 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/1010/builds/1190
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 34, done.
remote: Counting objects: 3% (1/27)
remote: Counting objects: 7% (2/27)
remote: Counting objects: 11% (3/27)
remote: Counting objects: 14% (4/27)
remote: Counting objects: 18% (5/27)
remote: Counting objects: 22% (6/27)
remote: Counting objects: 25% (7/27)
remote: Counting objects: 29% (8/27)
remote: Counting objects: 33% (9/27)
remote: Counting objects: 37% (10/27)
remote: Counting objects: 40% (11/27)
remote: Counting objects: 44% (12/27)
remote: Counting objects: 48% (13/27)
remote: Counting objects: 51% (14/27)
remote: Counting objects: 55% (15/27)
remote: Counting objects: 59% (16/27)
remote: Counting objects: 62% (17/27)
remote: Counting objects: 66% (18/27)
remote: Counting objects: 70% (19/27)
remote: Counting objects: 74% (20/27)
remote: Counting objects: 77% (21/27)
remote: Counting objects: 81% (22/27)
remote: Counting objects: 85% (23/27)
remote: Counting objects: 88% (24/27)
remote: Counting objects: 92% (25/27)
remote: Counting objects: 96% (26/27)
remote: Counting objects: 100% (27/27)
remote: Counting objects: 100% (27/27), done.
remote: Compressing objects: 20% (1/5)
remote: Compressing objects: 40% (2/5)
remote: Compressing objects: 60% (3/5)
remote: Compressing objects: 80% (4/5)
remote: Compressing objects: 100% (5/5)
remote: Compressing objects: 100% (5/5), done.
remote: Total 34 (delta 22), reused 22 (delta 22), pack-reused 7
From https://github.com/python/cpython
- branch 3.11 -> FETCH_HEAD Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in ctypes.util._is_elf() (GH-114394) (GH-114445) Switched to and reset branch '3.11'
configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING:
Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information.
./Modules/timemodule.c:151:13: warning: code will never be executed [-Wunreachable-code] 151 | PyErr_SetString(PyExc_OverflowError, | ^~~~~~~~~~~~~~~ 1 warning generated. ./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed [-Wunreachable-code] 3116 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark code as explicitly dead 3115 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) ./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed [-Wunreachable-code] 4059 | parser->m_characterDataHandler(parser->m_handlerArg, parser->m_dataBuf, | ^~~~~~ ./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark code as explicitly dead 4058 | else if (0 && parser->m_characterDataHandler) | ^ | /* DISABLES CODE */ ( ) 2 warnings generated. renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sysconfigdata__linux_s390x-linux-gnu.py to 644 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/__pycache__/_sysconfigdata__linux_s390x-linux-gnu.cpython-311.pyc to 644 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_contextvars.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/cmath.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/array.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/math.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_bisect.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_random.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_heapq.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_zoneinfo.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_datetime.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_json.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_lsprof.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_opcode.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_queue.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_statistics.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_struct.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_typing.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_asyncio.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/fcntl.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/unicodedata.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/grp.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/spwd.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_pickle.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/select.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_socket.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/syslog.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/mmap.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_xxsubinterpreters.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_posixsubprocess.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_csv.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/audioop.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testclinic.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testimportmultiple.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testinternalcapi.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testmultiphase.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testcapi.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testbuffer.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_xxtestfuzz.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_crypt.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_curses_panel.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/readline.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_md5.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha1.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_curses.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_hashlib.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha256.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha3.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_ssl.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha512.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_dbm.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_gdbm.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/termios.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/resource.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_blake2.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/ossaudiodev.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/zlib.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/binascii.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_bz2.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_lzma.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_multibytecodec.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/pyexpat.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_kr.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_elementtree.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_jp.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sqlite3.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_cn.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_tw.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_iso2022.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_hk.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_ctypes_test.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_posixshmem.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_multiprocessing.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/xxlimited.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/xxlimited_35.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_tkinter.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_decimal.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_ctypes.cpython-311-s390x-linux-gnu.so to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/ to 755 changing mode of /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/__pycache__ to 755 WARNING: The scripts pip3 and pip3.11 are installed in '/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin' which is not on PATH. Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location. WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Kill <WorkerThread #6 running test=test_posix pid=2480597 time=25 min> process group Warning -- Failed to wait for <WorkerThread #6 running test=test_posix pid=2480597 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin/python3.11', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": false, "match_tests": [], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": false, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 712361634, "json_file": {"file": 24, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/subprocess.py:1127: ResourceWarning: subprocess 2480597 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback Kill <WorkerThread #1 running test=test_posix pid=2494893 time=25 min> process group Warning -- Failed to wait for <WorkerThread #1 running test=test_posix pid=2494893 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin/python3.11', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": false, "match_tests": [], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": false, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 712361634, "json_file": {"file": 4, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/subprocess.py:1127: ResourceWarning: subprocess 2494893 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback
Test report
Failed tests:
- test_posix
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide Clang 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/982/builds/1192
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 34, done.
remote: Counting objects: 4% (1/25)
remote: Counting objects: 8% (2/25)
remote: Counting objects: 12% (3/25)
remote: Counting objects: 16% (4/25)
remote: Counting objects: 20% (5/25)
remote: Counting objects: 24% (6/25)
remote: Counting objects: 28% (7/25)
remote: Counting objects: 32% (8/25)
remote: Counting objects: 36% (9/25)
remote: Counting objects: 40% (10/25)
remote: Counting objects: 44% (11/25)
remote: Counting objects: 48% (12/25)
remote: Counting objects: 52% (13/25)
remote: Counting objects: 56% (14/25)
remote: Counting objects: 60% (15/25)
remote: Counting objects: 64% (16/25)
remote: Counting objects: 68% (17/25)
remote: Counting objects: 72% (18/25)
remote: Counting objects: 76% (19/25)
remote: Counting objects: 80% (20/25)
remote: Counting objects: 84% (21/25)
remote: Counting objects: 88% (22/25)
remote: Counting objects: 92% (23/25)
remote: Counting objects: 96% (24/25)
remote: Counting objects: 100% (25/25)
remote: Counting objects: 100% (25/25), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 34 (delta 18), reused 18 (delta 18), pack-reused 9
From https://github.com/python/cpython
- branch 3.11 -> FETCH_HEAD Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in ctypes.util._is_elf() (GH-114394) (GH-114445) Switched to and reset branch '3.11'
configure: WARNING: s390x-ibm-linux-gnu/clang is not supported configure: WARNING:
Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the CPython core team, see https://peps.python.org/pep-0011/ for more information.
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 Kill <WorkerThread #2 running test=test_posix pid=2447394 time=25 min> process group Warning -- Failed to wait for <WorkerThread #2 running test=test_posix pid=2447394 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 1941146400, "json_file": {"file": 6, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2447394 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback Kill <WorkerThread #1 running test=test_posix pid=2467815 time=25 min> process group Warning -- Failed to wait for <WorkerThread #1 running test=test_posix pid=2467815 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 1941146400, "json_file": {"file": 4, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2467815 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback make: *** [Makefile:1848: buildbottest] Error 2
Test report
Failed tests:
- test_posix
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora Rawhide 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/999/builds/1191
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
remote: Enumerating objects: 34, done.
remote: Counting objects: 3% (1/27)
remote: Counting objects: 7% (2/27)
remote: Counting objects: 11% (3/27)
remote: Counting objects: 14% (4/27)
remote: Counting objects: 18% (5/27)
remote: Counting objects: 22% (6/27)
remote: Counting objects: 25% (7/27)
remote: Counting objects: 29% (8/27)
remote: Counting objects: 33% (9/27)
remote: Counting objects: 37% (10/27)
remote: Counting objects: 40% (11/27)
remote: Counting objects: 44% (12/27)
remote: Counting objects: 48% (13/27)
remote: Counting objects: 51% (14/27)
remote: Counting objects: 55% (15/27)
remote: Counting objects: 59% (16/27)
remote: Counting objects: 62% (17/27)
remote: Counting objects: 66% (18/27)
remote: Counting objects: 70% (19/27)
remote: Counting objects: 74% (20/27)
remote: Counting objects: 77% (21/27)
remote: Counting objects: 81% (22/27)
remote: Counting objects: 85% (23/27)
remote: Counting objects: 88% (24/27)
remote: Counting objects: 92% (25/27)
remote: Counting objects: 96% (26/27)
remote: Counting objects: 100% (27/27)
remote: Counting objects: 100% (27/27), done.
remote: Compressing objects: 20% (1/5)
remote: Compressing objects: 40% (2/5)
remote: Compressing objects: 60% (3/5)
remote: Compressing objects: 80% (4/5)
remote: Compressing objects: 100% (5/5)
remote: Compressing objects: 100% (5/5), done.
remote: Total 34 (delta 22), reused 22 (delta 22), pack-reused 7
From https://github.com/python/cpython
- branch 3.11 -> FETCH_HEAD Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in ctypes.util._is_elf() (GH-114394) (GH-114445) Switched to and reset branch '3.11'
Objects/longobject.c: In function ‘long_format_binary’: Objects/longobject.c:2062:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 2062 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1938:25: note: ‘kind’ was declared here 1938 | enum PyUnicode_Kind kind; | ^~~~ Objects/longobject.c: In function ‘long_to_decimal_string_internal’: Objects/longobject.c:1885:13: warning: ‘kind’ may be used uninitialized [-Wmaybe-uninitialized] 1885 | else if (kind == PyUnicode_1BYTE_KIND) { | ^ Objects/longobject.c:1720:25: note: ‘kind’ was declared here 1720 | enum PyUnicode_Kind kind; | ^~~~ renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11 renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11 renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11 Kill <WorkerThread #6 running test=test_posix pid=2399861 time=25 min> process group Warning -- Failed to wait for <WorkerThread #6 running test=test_posix pid=2399861 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 1755663280, "json_file": {"file": 13, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2399861 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback Kill <WorkerThread #1 running test=test_posix pid=2422343 time=25 min> process group Warning -- Failed to wait for <WorkerThread #1 running test=test_posix pid=2422343 time=25 min 30 sec> completion (timeout=30.0 sec): TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/python', '-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests": ["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests": [], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false, "pgo_extended": false, "output_on_failure": false, "timeout": 1200.0, "verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null, "use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true, "random_seed": 1755663280, "json_file": {"file": 4, "file_type": "UNIX_FD"}, "__runtests__": true}'], 30.0) /home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/Lib/subprocess.py:1127: ResourceWarning: subprocess 2422343 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback make: *** [Makefile:1848: buildbottest] Error 2
Test report
Failed tests:
- test_posix
Sincerely, -The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8 LTO + PGO 3.11 while building python/cpython. Full details are available at: https://buildbot.python.org/all/#/builders/945/builds/1215
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-rhel8-z
Build Reason: <unknown> Blamelist: Miss Islington (bot) <31488909+miss-islington@users.noreply.github.com>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
==
Captured traceback
Traceback (most recent call last): File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_nntplib.py", line 332, in setUpClass cls.server = cls.NNTP_CLASS(cls.NNTP_HOST, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/nntplib.py", line 341, in __init__ self._base_init(readermode) File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/nntplib.py", line 355, in _base_init self.welcome = self._getresp() ^^^^^^^^^^^^^^^ File "/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/nntplib.py", line 490, in _getresp raise NNTPProtocolError(resp) nntplib.NNTPProtocolError: /home/news/bin/nnrpd: error while loading shared libraries: libperl.so.5.32: cannot open shared object file: No such file or directory
Test report
Failed tests:
- test_nntplib
Failed subtests:
- setUpClass - test.test_nntplib.NetworkedNNTPTests
Sincerely, -The Buildbot
participants (1)
-
buildbot＠python.org