May be remove the python debugging? On Tue, May 13, 2014 at 4:08 AM, Florian Maile <f.maile@gmx.de> wrote:

Hello,

I’m really getting insane of building the tutorial. My steps were:

1. Unpacking the ZIP 2. Running bootstrap in the boost.python root directory 3. Configuration of user-config.jam as below:

# Copyright 2003, 2005 Douglas Gregor # Copyright 2004 John Maddock # Copyright 2002, 2003, 2004, 2007 Vladimir Prus # Distributed under the Boost Software License, Version 1.0. # (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt)

# This file is used to configure your Boost.Build installation. You can modify # this file in place, or you can place it in a permanent location so that it # does not get overwritten should you get a new version of Boost.Build. See: # # http://www.boost.org/boost-build2/doc/html/bbv2/overview/configuration.html # # for documentation about possible permanent locations.

# This file specifies which toolsets (C++ compilers), libraries, and other # tools are available. Often, you should be able to just uncomment existing # example lines and adjust them to taste. The complete list of supported tools, # and configuration instructions can be found at: # # http://boost.org/boost-build2/doc/html/bbv2/reference/tools.html #

# This file uses Jam language syntax to describe available tools. Mostly, # there are 'using' lines, that contain the name of the used tools, and # parameters to pass to those tools -- where paremeters are separated by # semicolons. Important syntax notes: # # - Both ':' and ';' must be separated from other tokens by whitespace # - The '\' symbol is a quote character, so when specifying Windows paths you # should use '/' or '\\' instead. # # More details about the syntax can be found at: # # http://boost.org/boost-build2/doc/html/bbv2/advanced.html#bbv2.advanced.jam_... #

# ------------------ # GCC configuration. # ------------------

# Configure gcc (default version). # using gcc ;

# Configure specific gcc version, giving alternative name to use. # using gcc : 3.2 : g++-3.2 ;

# ------------------- # MSVC configuration. # -------------------

# Configure msvc (default version, searched for in standard locations and PATH). # using msvc ;

# Configure specific msvc version (searched for in standard locations and PATH). using msvc : 10.0 : C:\\app\\tools\\MSVisualStudio2010\\VC\\bin\\cl.exe ;

# ---------------------- # Borland configuration. # ---------------------- # using borland ;

# ---------------------- # STLPort configuration. # ----------------------

# Configure specifying location of STLPort headers. Libraries must be either # not needed or available to the compiler by default. # using stlport : : /usr/include/stlport ;

# Configure specifying location of both headers and libraries explicitly. # using stlport : : /usr/include/stlport /usr/lib ;

# ----------------- # QT configuration. # -----------------

# Configure assuming QTDIR gives the installation prefix. # using qt ;

# Configure with an explicit installation prefix. # using qt : /usr/opt/qt ;

# --------------------- # Python configuration. # ---------------------

# Configure specific Python version. # using python : 3.1 : /usr/bin/python3 : /usr/include/python3.1 : /usr/lib ;

using python : 2.6

# Version : C:\\app\\Python26\\python.exe # Python Path : C:\\app\\Python26\\include # include path : C:\\app\\Python26\\libs # lib path(s) : <python-debugging>on <define>BOOST_ALL_NO_LIB=1 ;

1. Invoking bjam in the tutorial directory as below:

C:\User\Z182428\boost_1_55_0\libs\python\example>cd tutorial

C:\User\Z182428\boost_1_55_0\libs\python\example\tutorial>bjam link.jam: No such file or directory ...patience... ...patience... ...found 1674 targets... ...updating 53 targets... common.mkdir bin common.mkdir bin\msvc-10.0 common.mkdir bin\msvc-10.0\debug common.mkdir ..\..\..\..\bin.v2 common.mkdir ..\..\..\..\bin.v2\libs common.mkdir ..\..\..\..\bin.v2\libs\python common.mkdir ..\..\..\..\bin.v2\libs\python\build common.mkdir ..\..\..\..\bin.v2\libs\python\build\msvc-10.0 common.mkdir ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\numeric.obj numeric.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\list.obj list.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\long.obj long.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\dict.obj dict.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\tuple.obj tuple.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\str.obj str.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\slice.obj slice.cpp common.mkdir ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\converter compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\converter\fro m_python.obj from_python.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\converter\reg istry.obj registry.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\converter\typ e_id.obj type_id.cpp common.mkdir ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\enum.o bj enum.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\class. obj class.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\functi on.obj function.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\inheri tance.obj inheritance.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\life_s upport.obj life_support.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\pickle _support.obj pickle_support.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\errors.obj errors.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\module.obj module.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\converter\bui ltin_converters.obj builtin_converters.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\converter\arg _to_python_base.obj arg_to_python_base.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\iterat or.obj iterator.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\stl_it erator.obj stl_iterator.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object_protoc ol.obj object_protocol.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object_operat ors.obj object_operators.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\wrapper.obj wrapper.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\import.obj import.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\exec.obj exec.cpp compile-c-c++ ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\object\functi on_doc_signature.obj function_doc_signature.cpp msvc.link.dll ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\boost_python- vc100-gd-1_55.dll LINK : fatal error LNK1181: cannot open input file 'python26_d.lib'

call "C:\app\tools\msvisualstudio2010\vc\vcvarsall.bat" x86 >nul link /NOLOGO /INCREMENTAL:NO /DLL /DEBUG /MACHINE:X86 /MANIFEST /subsystem:conso le /out:"..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\boost_python-vc100 -gd-1_55.dll" /IMPLIB:"..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\boos t_python-vc100-gd-1_55.lib" /LIBPATH:"C:\app\Python26\libs" @"..\..\..\..\bin. v2\libs\python\build\msvc-10.0\debug\boost_python-vc100-gd-1_55.dll.rsp" if %ERRORLEVEL% NEQ 0 EXIT %ERRORLEVEL%

...failed msvc.link.dll ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug\boo st_python-vc100-gd-1_55.dll ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\debug \boost_python-vc100-gd-1_55.lib ..\..\..\..\bin.v2\libs\python\build\msvc-10.0\d ebug\boost_python-vc100-gd-1_55.pdb... compile-c-c++ bin\msvc-10.0\debug\hello.obj hello.cpp ...skipped <pbin\msvc-10.0\debug>hello_ext.dll for lack of <p..\..\..\..\bin.v2\ libs\python\build\msvc-10.0\debug>boost_python-vc100-gd-1_55.lib... ...skipped <pbin\msvc-10.0\debug>hello_ext.lib for lack of <p..\..\..\..\bin.v2\ libs\python\build\msvc-10.0\debug>boost_python-vc100-gd-1_55.lib... ...skipped <pbin\msvc-10.0\debug>hello_ext.pdb for lack of <p..\..\..\..\bin.v2\ libs\python\build\msvc-10.0\debug>boost_python-vc100-gd-1_55.lib... ...skipped <p.>boost_python-vc100-gd-1_55.dll for lack of <p..\..\..\..\bin.v2\l ibs\python\build\msvc-10.0\debug>boost_python-vc100-gd-1_55.dll... ...skipped <p.>hello_ext.dll for lack of <pbin\msvc-10.0\debug>hello_ext.dll... common.mkdir bin\hello.test common.mkdir bin\hello.test\msvc-10.0 common.mkdir bin\hello.test\msvc-10.0\debug ...skipped <pbin\hello.test\msvc-10.0\debug>hello for lack of <pbin\msvc-10.0\de bug>hello_ext.dll... ...failed updating 3 targets... ...skipped 7 targets... ...updated 43 targets...

C:\User\Z182428\boost_1_55_0\libs\python\example\tutorial>

I would be very grateful if someone could give me a clue !

Thank a lot in advance !

_______________________________________________ Cplusplus-sig mailing list Cplusplus-sig@python.org https://mail.python.org/mailman/listinfo/cplusplus-sig