$MACOSX_DEPLOYMENT_TARGET mismatch
Hi there, I am trying to install readline and cx_Oracle on my Mac OSX 10.8.4. I've just installed python 2.7.3 standard in my $HOME dir and then I did: export PATH=$HOME/bin:$PATH ~/setuptools-0.7.7 python setup.py install --prefix=$HOME which worked. I tried to installed ipython 0.13.2 which seems to have worked but it fails to start because of readline. easy_install readline Searching for readline Reading https://pypi.python.org/simple/readline/ Best match: readline 6.2.4.1 Downloading https://pypi.python.org/packages/source/r/readline/readline-6.2.4.1.tar.gz#m... Processing readline-6.2.4.1.tar.gz Writing /var/folders/0c/n_0by3qj74bg5m68fxrw2kw40000gp/T/easy_install-3WQA6K/readline-6.2.4.1/setup.cfg Running readline-6.2.4.1/setup.py -q bdist_egg --dist-dir /var/folders/0c/n_0by3qj74bg5m68fxrw2kw40000gp/T/easy_install-3WQA6K/readline-6.2.4.1/egg-dist-tmp-eyGcUE error: Setup script exited with error: $MACOSX_DEPLOYMENT_TARGET mismatch: now "10.3" but "10.4" during configure How can solve this problem please? Thanks in advance, Alan -- Alan Wilter SOUSA da SILVA, DSc Bioinformatician, UniProt - PANDA, EMBL-EBI CB10 1SD, Hinxton, Cambridge, UK +44 1223 49 4588
This is really a build question, rather than a distributuion question -- I"d try the pythonmac list: http://mail.python.org/mailman/listinfo/pythonmac-sig I recall that readline is a bit of a pain on the Mac, but don't recall the solution (nor am I running 10.8 yet). Good luck, -Chris On Wed, Jul 3, 2013 at 6:55 AM, Alan <alanwilter@gmail.com> wrote:
Hi there,
I am trying to install readline and cx_Oracle on my Mac OSX 10.8.4. I've just installed python 2.7.3 standard in my $HOME dir and then I did:
export PATH=$HOME/bin:$PATH ~/setuptools-0.7.7 python setup.py install --prefix=$HOME
which worked.
I tried to installed ipython 0.13.2 which seems to have worked but it fails to start because of readline.
easy_install readline Searching for readline Reading https://pypi.python.org/simple/readline/ Best match: readline 6.2.4.1 Downloading https://pypi.python.org/packages/source/r/readline/readline-6.2.4.1.tar.gz#m... Processing readline-6.2.4.1.tar.gz Writing /var/folders/0c/n_0by3qj74bg5m68fxrw2kw40000gp/T/easy_install-3WQA6K/readline-6.2.4.1/setup.cfg Running readline-6.2.4.1/setup.py -q bdist_egg --dist-dir /var/folders/0c/n_0by3qj74bg5m68fxrw2kw40000gp/T/easy_install-3WQA6K/readline-6.2.4.1/egg-dist-tmp-eyGcUE error: Setup script exited with error: $MACOSX_DEPLOYMENT_TARGET mismatch: now "10.3" but "10.4" during configure
How can solve this problem please?
Thanks in advance,
Alan
-- Alan Wilter SOUSA da SILVA, DSc Bioinformatician, UniProt - PANDA, EMBL-EBI CB10 1SD, Hinxton, Cambridge, UK +44 1223 49 4588
_______________________________________________ Distutils-SIG maillist - Distutils-SIG@python.org http://mail.python.org/mailman/listinfo/distutils-sig
-- Christopher Barker, Ph.D. Oceanographer Emergency Response Division NOAA/NOS/OR&R (206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception Chris.Barker@noaa.gov
Well, I found out that if before compiling my python I set export MACOSX_DEPLOYMENT_TARGET=10.3 and then do all the rest, then I get easy_install to work. Besides, I had the same error trying to install cx_Oracle. So, somehow my python (or setuptools) need to build for "10.3". For me it's a bug in setuptools since the function that do this check and raise the error are from setuptools package. Alan On 3 July 2013 19:50, Chris Barker - NOAA Federal <chris.barker@noaa.gov>wrote:
This is really a build question, rather than a distributuion question -- I"d try the pythonmac list:
http://mail.python.org/mailman/listinfo/pythonmac-sig
I recall that readline is a bit of a pain on the Mac, but don't recall the solution (nor am I running 10.8 yet).
Good luck, -Chris
On Wed, Jul 3, 2013 at 6:55 AM, Alan <alanwilter@gmail.com> wrote:
Hi there,
I am trying to install readline and cx_Oracle on my Mac OSX 10.8.4. I've just installed python 2.7.3 standard in my $HOME dir and then I did:
export PATH=$HOME/bin:$PATH ~/setuptools-0.7.7 python setup.py install --prefix=$HOME
which worked.
I tried to installed ipython 0.13.2 which seems to have worked but it fails to start because of readline.
easy_install readline Searching for readline Reading https://pypi.python.org/simple/readline/ Best match: readline 6.2.4.1 Downloading
https://pypi.python.org/packages/source/r/readline/readline-6.2.4.1.tar.gz#m...
Processing readline-6.2.4.1.tar.gz Writing
/var/folders/0c/n_0by3qj74bg5m68fxrw2kw40000gp/T/easy_install-3WQA6K/readline-6.2.4.1/setup.cfg
Running readline-6.2.4.1/setup.py -q bdist_egg --dist-dir
/var/folders/0c/n_0by3qj74bg5m68fxrw2kw40000gp/T/easy_install-3WQA6K/readline-6.2.4.1/egg-dist-tmp-eyGcUE
error: Setup script exited with error: $MACOSX_DEPLOYMENT_TARGET mismatch: now "10.3" but "10.4" during configure
How can solve this problem please?
Thanks in advance,
Alan
-- Alan Wilter SOUSA da SILVA, DSc Bioinformatician, UniProt - PANDA, EMBL-EBI CB10 1SD, Hinxton, Cambridge, UK +44 1223 49 4588
_______________________________________________ Distutils-SIG maillist - Distutils-SIG@python.org http://mail.python.org/mailman/listinfo/distutils-sig
--
Christopher Barker, Ph.D. Oceanographer
Emergency Response Division NOAA/NOS/OR&R (206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception
Chris.Barker@noaa.gov
-- Alan Wilter SOUSA da SILVA, DSc Bioinformatician, UniProt - PANDA, EMBL-EBI CB10 1SD, Hinxton, Cambridge, UK +44 1223 49 4588
On Wed, Jul 3, 2013 at 12:12 PM, Alan <alanwilter@gmail.com> wrote:
Well, I found out that if before compiling my python I set
export MACOSX_DEPLOYMENT_TARGET=10.3
and then do all the rest, then I get easy_install to work.
cool - well done.
So, somehow my python (or setuptools) need to build for "10.3".
For me it's a bug in setuptools since the function that do this check and raise the error are from setuptools package.
I've just installed python 2.7.3 standard
How did you install it? not sure what "standard" is. The build is supposed to setup distutils to do the right thing, and I'm pretty sure it does with the binaries from python.org. I will note that unless you want to re-package (i.e. with py2app) and distribute to folks with old machines, you probably don't need to support way back to 10.3 -- the "intel build" on python.org is set up for 10.5 and greater, and may avoid this issue. -Chris -- Christopher Barker, Ph.D. Oceanographer Emergency Response Division NOAA/NOS/OR&R (206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception Chris.Barker@noaa.gov
participants (2)
-
Alan -
Chris Barker - NOAA Federal