Mailman 3 September 2019 - docs

[issue22128] patch: steer people away from codecs.open
by Frank van Dijk 17 Apr '21

17 Apr '21

New submission from Frank van Dijk: stackoverflow.com has a zillion answers recommending the use of codecs.open() as a unicode capable drop in replacement for open(). This probably means that there is still a lot of code being written that uses codecs.open(). That's bad thing because of codecs.open()'s lack of newline conversion. A lot of that code will - have compatibility issues when it is moved between unix and windows - silently break text files on windows, leading to issues further downstream (confusing other tools, messing up revision control histories) The problem has been fixed with io.open() in 2.x and open() in 3.x. Unfortunately the 2.7 unicode HOWTO still recommends the use of codecs.open(). The 2.7 and the 3.x documentation of codecs.open() doesn't refer the reader to better alternatives. The attached patches fix that. The only downside I see is that newly written code that uses the better alternatives would be incompatible with 2.5 and older. However croaking on a small minority of systems is better than silently disrupting workflows, causing platform incompatibilities, and inviting flaky workarounds. The 2.7 patch makes the unicode HOWTO recommend io.open() instead of codecs.open(). Both patches change the codecs.open() documentation to refer to io.open() or (on 3.x) open(). Additionally I removed the "data loss" explanation from codecs.open()'s note about its lack of newline conversion. It is not particularly helpful information and it is not entirely correct (data loss could also have been avoided by doing newline conversion before encoding and after decoding) ---------- assignee: docs@python components: Documentation files: codecsopen2.patch keywords: patch messages: 224632 nosy: Frank.van.Dijk, docs@python priority: normal severity: normal status: open title: patch: steer people away from codecs.open type: behavior versions: Python 2.7, Python 3.4, Python 3.5 Added file: http://bugs.python.org/file36234/codecsopen2.patch _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue22128> _______________________________________

7 11

[issue37741] importlib.metadata docs not showing up in the module index
by Brett Cannon 15 Apr '21

15 Apr '21

New submission from Brett Cannon <brett(a)python.org>: If you look at https://docs.python.org/3.9/py-modindex.html#cap-i you will see that importlib.metadata isn't listed (same goes for the 3.8 docs). Or are you leaving it out due to it being provisional? ---------- assignee: docs@python components: Documentation messages: 348872 nosy: barry, brett.cannon, docs@python, jaraco priority: normal severity: normal status: open title: importlib.metadata docs not showing up in the module index versions: Python 3.8, Python 3.9 _______________________________________ Python tracker <report(a)bugs.python.org> <https://bugs.python.org/issue37741> _______________________________________

7 19

[issue28197] range.index mismatch with documentation
by Vedran Čačić 15 Apr '21

15 Apr '21

New submission from Vedran Čačić: Look at this: >>> from collections.abc import Sequence >>> help(Sequence.index) index(self, value, start=0, stop=None) S.index(value, [start, [stop]]) -> integer -- return first index of value. Raises ValueError if the value is not present. >>> issubclass(range, Sequence) True >>> help(range.index) index(...) rangeobject.index(value, [start, [stop]]) -> integer -- return index of value. Raise ValueError if the value is not present. So far, so good. But: >>> range(9).index(2, 1, 5) TypeError: index() takes exactly one argument (3 given) Of course it's not essential, but the docs shouldn't lie. And if range _is_ a Sequence, then it should have the complete interface of a Sequence. Including start and end arguments for .index: they are optional from the point of call, not from the point of implementation. :-) ---------- assignee: docs@python components: Documentation, Library (Lib) messages: 276908 nosy: docs@python, veky priority: normal severity: normal status: open title: range.index mismatch with documentation type: behavior versions: Python 3.5, Python 3.6 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue28197> _______________________________________

6 17

[issue20364] Rename & explain sqlite3.Cursor.execute 'parameters' param
by Terry J. Reedy 14 Apr '21

14 Apr '21

New submission from Terry J. Reedy: "execute(sql[, parameters]) Executes an SQL statement. The SQL statement may be parametrized (i. e. placeholders instead of SQL literals). The sqlite3 module supports two kinds of placeholders: question marks (qmark style) and named placeholders (named style)." Experimental facts based on experiments with the code example in the doc, using 3.4.b2: 'parameters' is a single subscriptable collection parameter, sequence or dict, that might be called seq_dict. It is positional only, so whatever name is used is a dummy. Only one placeholder style can be used in a given SQL statement string. If question marks are used, seq_dict must be a sequence. If names are used, seq_dict can be either a sequence or dict or subclass thereof. A UserDict is treated as a sequence and raises KeyError(0). Possible text that encompasses the above, replacing the last sentence: "A statement may use one of two kinds of placeholders: question marks (qmark style) or named placeholders (named style). For qmark style, seq_dict must be a sequence. For named style, it can be either a sequence or dict instance. Len(seq_dict) must match the number of placeholders." After cleaning up the test file, I will verify on 2.7 and upload. ---------- assignee: docs@python components: Documentation, Library (Lib) messages: 208908 nosy: docs@python, terry.reedy priority: normal severity: normal stage: patch review status: open title: Rename & explain sqlite3.Cursor.execute 'parameters' param type: behavior versions: Python 2.7, Python 3.3, Python 3.4 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue20364> _______________________________________

7 12

[issue34398] Docs search does not index glossary
by Jonathan Fine 02 Apr '21

02 Apr '21

New submission from Jonathan Fine <jfine2358(a)gmail.com>: The docs contain a very useful page https://docs.python.org/3.5/glossary.html. However, the search feature does not index the glossary. Thus, the search https://docs.python.org/3.5/search.html?q=iterable does not produce the helpful glossary entry === iterable An object capable of returning its members one at a time. Examples of iterables include all sequence types (such as list, str, and tuple) and some non-sequence types like dict, file objects, and objects of any [...] === #788509 is the only docs issue I could find, whose title contains glossary. It gives insight into the thoughts then about the tutorial. In msg44460 Skip Montaro says (1) that the glossary is "for the tutorial", and (2) he'd like to improve links into the tutorial. I suggest that part of the fix for this issue is on the home page page Glossary in the first grouping "Parts of the documentation." ---------- assignee: docs@python components: Documentation messages: 323503 nosy: docs@python, jfine2358 priority: normal severity: normal status: open title: Docs search does not index glossary type: behavior versions: Python 2.7, Python 3.4, Python 3.5, Python 3.6, Python 3.7, Python 3.8 _______________________________________ Python tracker <report(a)bugs.python.org> <https://bugs.python.org/issue34398> _______________________________________

6 12

[issue35026] Winreg's documentation lacks mentioning required permission at some points
by George Fischhof 28 Mar '21

28 Mar '21

New submission from George Fischhof <george(a)fischhof.hu>: Winreg's documentation lacks mentioning required permission at some points Hi there, on page https://docs.python.org/3/library/winreg.html it is not mentioned in the description of the following functions: winreg.DeleteKey winreg.DeleteKeyEx winreg.DeleteValue that they require KEY_SET_VALUE when the registry key is opened. It is mentioned for example at: winreg.SetValue with the following text: The key identified by the key parameter must have been opened with KEY_SET_VALUE access. BR, George ---------- assignee: docs@python components: Documentation messages: 328034 nosy: docs@python, georgefischhof priority: normal severity: normal status: open title: Winreg's documentation lacks mentioning required permission at some points type: enhancement versions: Python 3.7 _______________________________________ Python tracker <report(a)bugs.python.org> <https://bugs.python.org/issue35026> _______________________________________

4 4

[issue21297] skipinitialspace in the csv module only skips spaces, not "whitespace" in general
by Daniel Andersson 26 Mar '21

26 Mar '21

New submission from Daniel Andersson: Regarding the `skipinitialspace` parameter to the different CSV reader dialects in the `csv` module, the official documentation asserts: When True, whitespace immediately following the delimiter is ignored. and the `help(csv)` style module documentation says: * skipinitialspace - specifies how to interpret whitespace which immediately follows a delimiter. It defaults to False, which means that whitespace immediately following a delimiter is part of the following field. "Whitespace" is a bit too general in both cases (at least a red herring in the second case), since it only skips spaces and not e.g. tabs [1]. In `Modules/_csv.c`, it more correctly describes the parameter. At line 81: int skipinitialspace; /* ignore spaces following delimiter? */ and the actual implementation at line 638: else if (c == ' ' && dialect->skipinitialspace) /* ignore space at start of field */ ; No-one will probably assume that the whole UTF-8 spectrum of "whitespace" is skipped, but at least I initially assumed that the tab character was included. [1]: http://en.wikipedia.org/wiki/Whitespace_character ---------- assignee: docs@python components: Documentation, Library (Lib) messages: 216780 nosy: Daniel.Andersson, docs@python priority: normal severity: normal status: open title: skipinitialspace in the csv module only skips spaces, not "whitespace" in general type: behavior versions: Python 2.7, Python 3.1, Python 3.2, Python 3.3, Python 3.4, Python 3.5 _______________________________________ Python tracker <report(a)bugs.python.org> <http://bugs.python.org/issue21297> _______________________________________

6 9

[issue37405] socket.getsockname() returns string instead of tuple
by Brent Gardner 23 Mar '21

23 Mar '21

New submission from Brent Gardner <bggardner(a)gmail.com>: In Python 3.5.3, a socket with type AF_CAN returns a tuple in the form `(interface, )` from getsockname(). In Python 3.7.3, getsockname() returns a string (the name of the interface). The documentation states "a tuple is used for the AF_CAN address family". The string will break code that worked in 3.5.3 by raising errors such as "Value Error: too many values to unpack (expected 2)". Example: #3.5.3 import socket s = socket.socket(socket.AF_CAN, socket.SOCK_RAW, socket.CAN_RAW) s.bind(('vcan0',)) # requires tuple s.getsockname() # returns tuple: ('vcan0', 29) #3.7.3 import socket s = socket.socket(socket.AF_CAN, socket.SOCK_RAW, socket.CAN_RAW) s.bind(('vcan0',)) # requires tuple s.getsockname() # returns string: 'vcan0' ---------- assignee: docs@python components: Documentation messages: 346559 nosy: Brent Gardner, docs@python priority: normal severity: normal status: open title: socket.getsockname() returns string instead of tuple versions: Python 3.7 _______________________________________ Python tracker <report(a)bugs.python.org> <https://bugs.python.org/issue37405> _______________________________________

6 11

[issue35118] Add peek() or first() method in queue
by Windson Yang 23 Mar '21

23 Mar '21

New submission from Windson Yang <wiwindson(a)gmail.com>: I found other languages like Java and C++ have the method to access the first value in Queue like first() and peek(). Since we use deque_ to create Queue now, it's easy to implement in python using the index. Otherwise, we can add this to the document? I also found some discussion_ here. .. _deque: https://github.com/python/cpython/blob/master/Lib/queue.py#L205 .. _discussion https://mail.python.org/pipermail/python-list/2010-March/569930.html ---------- assignee: docs@python components: Documentation messages: 328963 nosy: Windson Yang, docs@python priority: normal severity: normal status: open title: Add peek() or first() method in queue type: enhancement versions: Python 2.7, Python 3.4, Python 3.5, Python 3.6, Python 3.7, Python 3.8 _______________________________________ Python tracker <report(a)bugs.python.org> <https://bugs.python.org/issue35118> _______________________________________

3 11

[issue37860] Add netlify deploy preview for docs
by Ashwin Ramaswami 22 Mar '21

22 Mar '21

New submission from Ashwin Ramaswami <aramaswamis(a)gmail.com>: It would be good to preview the cpython documentation on PRs using Netlify. See https://github.com/python/core-workflow/issues/348 ---------- assignee: docs@python components: Documentation messages: 349752 nosy: docs@python, epicfaace priority: normal severity: normal status: open title: Add netlify deploy preview for docs versions: Python 3.9 _______________________________________ Python tracker <report(a)bugs.python.org> <https://bugs.python.org/issue37860> _______________________________________

6 15