Dear Adel Belayadi, I am new to Kwant, as per our previous discussion, here I am attaching my program, I have defined my strain region and function for uniaxial strain in armchair direction. Now I struggling with *how to introduce this function* in the program. Please correct me if I have understood it wrongly, Firstly we have to define graphene, by using the position of lattice points we have to apply pos_transform in a specified region, which will use the values of x and y co-ordinate from lattice placement due to lattice structure. The next doubt is like, as I using uniaxial strain in Y direction, it will squeeze lattice in X direction. So, the unstrained lattice point also has to shift accordingly. Right now I am only focusing on position displacement and not hopping. import numpy as np import scipy.io as spio from numpy import * import scipy.linalg as la import matplotlib as mpl import sympy as sym import kwant
#%%###################### # parameters L=20 # Length of device on both sides W=5 # Width of device t=-2.7 pot=0.5 c=0.05 angle=pi/2 # lattice type graphene = kwant.lattice.general([(1, 0), (sin(pi/6), cos(pi/6))], [(0, 0), (0, 1 / sqrt(3))], norbs=1) a, b = graphene.sublattices # scattering region def rectangle(pos): x, y = pos return 0 <= x <= L and 0<= y <= W
# strain_pos def pos_transform(pos,c,angle): x,y= pos if 5<x<10: ux=(cos(angle)**2-0.165*sin(angle)**2)*c*x uy=(sin(angle)**2-0.165*cos(angle)**2)*c*y return x+ux,y+uy else: return x,y
syst = kwant.Builder() syst[graphene.shape(rectangle, (0, 0))] = 0 syst=pos_transform((5,0),0.05,pi/2) #hoppings = (((0, 0), a, b), ((0, 1), a, b), ((-1, 1), a, b)) #syst[[kwant.builder.HoppingKind(*hopping) for hopping in hoppings]] = t kwant.plot(syst);
Thanks in advance. Regards, shrushti
On Fri, Jul 16, 2021 at 2:38 AM Adel Belayadi email@example.com wrote:
Dear Shrushti, it is straightforward to deal with strained graphene. In the region you want to make strain, just set the function which modifies the site position (this mainly depends on the amount and type of the strain). Second, once you have shifted the site position you need to shift the hopping as illustrated in the file provided by Mr. Antonio. here you find a simple script about how to shift the site position in the case of uniaxial strain (adjusted to you case)
def Triaxial_transform(pos, center, I): """ I is a parameter that lets us to control the intensity of the strain""" x, y = pos cx, cy = center, center # the center of the strain r=sqrt((x-cx)**2+(y-cy)**2) if r<sigma: ux = 2*I * x*y uy = I * (x**2 - y**2) return x + ux, y + uy else: return x, y
Then use this position to set your hopping as illustrated in a previous discussion [Ref-1].
You have to be careful in case you are using a strain in the z axis since you will not be able to plot the current. It is somehow tricky in this scenario.
I hop this will help Best wishes
Le jeu. 15 juil. 2021 à 14:19, firstname.lastname@example.org a écrit :
I want to create the graphene strained superlattice-like structure, having uniaxial strain defined at the specified region. Please, someone can suggest to me how to define the strained region and interface between unstrained and strained graphene regions. Thanks in Advance Shrushti