Public bug reported: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group (what I've done), or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using bin/newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases* but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are created from scratch. Thank you. ** Affects: mailman Importance: Undecided Status: New ** Affects: mailman (Ubuntu) Importance: Undecided Status: New ** Affects: mailman (Debian) Importance: Undecided Status: New ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these file get created from scratch and which I describe below for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be meet: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix need read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group need write access to those files at any time Currently, the following behavior has been observed. - When creating a new list on command line, using newlist as follow: '# - newlist -u virtualhost foobar', the files will be created as follow + When creating a new list on command line, using newlist script as + follow: + + # newlist -u virtualhost foobar + + the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch - using bin/genaliases + using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db - Note that in both case, files were not present. Thus, they were created + Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these file get created from scratch and which I describe below for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be meet: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them - I. Postfix need read access to the aliases.db file + I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 - II. Mailman group need write access to those files at any time + II. Mailman group needs a write access to those files at any time Currently, the following behavior has been observed. When creating a new list on command line, using newlist script as follow: - # newlist -u virtualhost foobar + # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these file get created from scratch and which I describe below for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be meet: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time - Currently, the following behavior has been observed. + The following behavior has been observed: When creating a new list on command line, using newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these file get created from scratch and which I describe below for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be meet: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *db file, after running POSTALIAS(1) - command to be sure that Mailman group has write permissions. + command to be sure that Mailman group has write permissions, at least + when the files are create from scratch. + + Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when - these file get created from scratch and which I describe below for the - Mailman data/aliases table only but the problem is identical for the - Mailman data/virtual-mailman map. + these files are created from scratch. + + Here I describe the current behavior for the Mailman data/aliases table + only but the problem is identical for the Mailman data/virtual-mailman + map. In order, the following conditions have to be meet: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are create from scratch. Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. - In order, the following conditions have to be meet: + In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are create from scratch. Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. - The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because - the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). + The problem here is that with those permissions, creating a list through + Mailman interface later on will result in a permissions denied error + because the Mailman group, through the wrapper, cannot write (update) + the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set - correct permissions on resulting *db file, after running POSTALIAS(1) + correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are create from scratch. Thank you. ** Also affects: mailman (Ubuntu) Importance: Undecided Status: New ** Also affects: mailman (Debian) Importance: Undecided Status: New ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least - when the files are create from scratch. + when the files are created from scratch. Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: - When creating a new list on command line, using newlist script as + When creating a new list on command line, using bin/newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are created from scratch. Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using bin/newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" - # chmod 0660 data/aliases + # chmod 0660 data/aliases.db but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are created from scratch. Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman group or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using bin/newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" - # chmod 0660 data/aliases.db + # chmod 0660 data/aliases* but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are created from scratch. Thank you. ** Description changed: Dear project leader At least in version 2.1.23, there is a bug regarding permissions set for Mailman data/aliases table and Mailman data/virtual-mailman map when these files are created from scratch. Here I describe the current behavior for the Mailman data/aliases table only but the problem is identical for the Mailman data/virtual-mailman map. In order, the following conditions have to be met: - Postfix need read access to the aliases.db file - Mailman like to be owner of those files and the Mailman group needs write access to them I. Postfix needs a read access to the aliases.db file We can either set permissions as 0660 and add postfix user to mailman - group or set the permissions as 0664 + group (what I've done), or set the permissions as 0664 II. Mailman group needs a write access to those files at any time The following behavior has been observed: When creating a new list on command line, using bin/newlist script as follow: # newlist -u virtualhost foobar the files will be created as follow: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db The same thing has been observed when recreating the file from scratch using bin/genaliases: -rw-rw---- 1 root list aliases -rw-r----- 1 root list aliases.db Note that in both cases, files were not present. Thus, they were created from scratch. As you can see here, the Mailman data/aliases table is created with the expected group and permissions but the data/aliases.db file is only writable by owner. From the POSTALIAS(1) command point of view, that is the expected behavior: The file is created with the same group and other read permissions as their source file. The problem here is that with those permissions, creating a list through Mailman interface later on will result in a permissions denied error because the Mailman group, through the wrapper, cannot write (update) the aliases.db file (no write permissions). That is really a problem. Of course, one can just pre-create the files as follow: # cd /var/lib/mailman # sg list -c "touch data/aliases && postalias data/aliases" # chmod 0660 data/aliases* but that seem tedious. What if at some point (for any reason), the files get recreated from scratch? So, from my point of view, the MTA/Postfix.py module should always set correct permissions on resulting *.db file, after running POSTALIAS(1) command to be sure that Mailman group has write permissions, at least when the files are created from scratch. Thank you. -- You received this bug notification because you are a member of Mailman Coders, which is subscribed to GNU Mailman. https://bugs.launchpad.net/bugs/1696066 Title: Postfix module - Mailman wrapper - Couldn't write data/aliases.db and data/virtual-mailman.db files To manage notifications about this bug go to: https://bugs.launchpad.net/mailman/+bug/1696066/+subscriptions