Bugs item #1077587, was opened at 2004-12-02 09:02 Message generated for change (Comment added) made by prubin You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=100103&aid=1077587&group_id=103 Category: bounce detection Group: 2.1 (stable) Status: Open Resolution: None Priority: 5 Submitted By: Paul Rubin (prubin) Assigned to: Nobody/Anonymous (nobody) Summary: Memory Leak in Bounce Runner Initial Comment: Something is going bady wrong with the BouceRunner It is leaking memory. After it runs for a short time it has consumed hundreds of megabytes of memory. I kill it with -9 and it restarts and is fine for another couple of hours. Sometimes it does not restart and I have to stop and restart the mailman service. This is running on a Linux box with Redhat 9 and postfix 2.1.1 and mailman 2.1.5 and python 2.2.2 Below you will se a PS from right before I killed the process and below that one from a few seconds later. If you will tell me what you need I would really like to get to the bottom of this, I am killing the process like 10 times per day. If it eats too much memory before I catch it then the entire system fails. [root@tbnonline ~]# ps -U mailman -o pid,%cpu,% mem,stime,time,vsz,args PID %CPU %MEM STIME TIME VSZ COMMAND 12949 0.0 0.0 08:05 00:00:00 7068 /usr/bin/python /var/mailman/bin/mailmanctl -s -q start 12950 0.1 0.3 08:05 00:00:02 11176 /usr/bin/python /var/mailman/bin/qrunner -- runner=ArchRunner:0:1 -s 12951 18.9 70.8 08:05 00:08:40 931312 /usr/bin/python /var/mailman/bin/qrunner -- runner=BounceRunner:0:1 -s 12952 0.0 0.0 08:05 00:00:00 7040 /usr/bin/python /var/mailman/bin/qrunner -- runner=CommandRunner:0:1 -s 12953 0.0 0.1 08:05 00:00:00 9256 /usr/bin/python /var/mailman/bin/qrunner -- runner=IncomingRunner:0:1 -s 12954 0.0 0.1 08:05 00:00:00 7080 /usr/bin/python /var/mailman/bin/qrunner -- runner=NewsRunner:0:1 -s 12955 2.5 0.6 08:05 00:01:11 14172 /usr/bin/python /var/mailman/bin/qrunner -- runner=OutgoingRunner:0:1 -s 12956 0.8 0.2 08:05 00:00:24 10628 /usr/bin/python /var/mailman/bin/qrunner -- runner=VirginRunner:0:1 -s 12957 0.1 0.2 08:05 00:00:04 13272 /usr/bin/python /var/mailman/bin/qrunner -- runner=RetryRunner:0:1 -s [root@tbnonline ~]# ps -U mailman -o pid,%cpu,% mem,stime,time,vsz,args PID %CPU %MEM STIME TIME VSZ COMMAND 12949 0.0 0.1 08:05 00:00:00 7072 /usr/bin/python /var/mailman/bin/mailmanctl -s -q start 12950 0.0 0.3 08:05 00:00:02 11176 /usr/bin/python /var/mailman/bin/qrunner -- runner=ArchRunner:0:1 -s 12952 0.0 0.0 08:05 00:00:00 7040 /usr/bin/python /var/mailman/bin/qrunner -- runner=CommandRunner:0:1 -s 12953 0.0 0.2 08:05 00:00:00 9256 /usr/bin/python /var/mailman/bin/qrunner -- runner=IncomingRunner:0:1 -s 12954 0.0 0.1 08:05 00:00:00 7080 /usr/bin/python /var/mailman/bin/qrunner -- runner=NewsRunner:0:1 -s 12955 3.0 0.9 08:05 00:01:43 13584 /usr/bin/python /var/mailman/bin/qrunner -- runner=OutgoingRunner:0:1 -s 12956 1.2 0.6 08:05 00:00:41 10848 /usr/bin/python /var/mailman/bin/qrunner -- runner=VirginRunner:0:1 -s 12957 0.1 0.6 08:05 00:00:06 13284 /usr/bin/python /var/mailman/bin/qrunner -- runner=RetryRunner:0:1 -s 14900 29.8 1.1 08:51 00:02:47 13764 /usr/bin/python /var/mailman/bin/qrunner -- runner=BounceRunner:0:1 -s ----------------------------------------------------------------------

Comment By: Paul Rubin (prubin) Date: 2004-12-15 12:29

Message: Logged In: YES user_id=91557 I do not have a specific number of bounces per day. We send around 500,000 message per day with peak days around 1,000,000, we know that we have some bad addresses, but at any given time there should not be more than 5,000 bounce notices per day (full mailboxes are common) As far as I can tell only certain bounce notices cause the leak. We can go hours or days with memory being almost flat, then suddenly 200M vanishes in 2 or 3 minutes. Is there any way I could 'hack' the code to somehow grab the information about what bounce notice is causing the problem. Or to capture all bounce notices in some outof the way space that I could tar up an send to you for testing. If nothing else I could edit the aliases to copy all of the messages to a file and zip it down for you after a few days. Does any of this make any sense? ---------------------------------------------------------------------- Comment By: Tokio Kikuchi (tkikuchi) Date: 2004-12-14 19:19 Message: Logged In: YES user_id=67709 My FreeBSD4.7/Solaris8 installations have no such problems. How many bounces you get on this system? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=100103&aid=1077587&group_id=103