Mailman 3 February 2002 - Mailman-Users

Release 2.1
by Maurice Lafleur Feb. 27, 2002

Feb. 27, 2002

Is it known yet: A) When will MM 2.1 be available B) If it will incorporate foreign language support for admin and lookup pages Best regards, MGL Get your own FREE E-mail address at http://www.linuxfreemail.com Linux FREE Mail is 100% FREE, 100% Linux, 100% better, and 100% yours!

1 0

Reply-to address is missing hostname.
by Eric Zuck Feb. 27, 2002

Feb. 27, 2002

I am currently using mailman version 2.01. I am set up on a Linux box (Redhat 7.0): say foobar in domain mydomain.com Everything is woking pretty much OK. I can post by sending to list(a)foobar.mydomain.com The problem is that when I do a reply (replis are configured as to 'this list'), the reply goes to: list(a)mydomain.com When I want them to go to list(a)foobar.mydomain.com I can get around this by setting an explicit return-to address, but this doesn't work for the -owner etc. lists. Is there something dimple that I can do? Something I've overlooked? Some documentation I haven't read? (If RTFM, which manual?) Thanks, -Eric Zuck

1 0

Re: [Mailman-Users] I Suppose that MailMan doesn't work with IPLANET/NETSCAPE Messaging?
by cms＠balius.com Feb. 27, 2002

Feb. 27, 2002

Serigo, NMS and iMS are _not_ the same product. I hate what we (I work for Sun) did with the branding. Most products we simply rebranded iPlanet but when it comes to mail that really is not fair and it could be the same thing for other products as well. iMS is the best components of 3 products, PMDF (MTA), SIMS (Domain Hosting), and NMS (store,pop,imap,webmail). Note that SIMS gets its MTA from PMDF as well. >From the other posts that I've read you are using NMS 4.15. If your software license premits it upgrade to iMS as fast as you can. (iMS 5.2 may have just RTM'd today.) I've done such upgrades not hard to do. The learning curve is the MTA. While I run mailman here at home, due to local issues, it runs on a different machine than iMS. Mailman uses the local MTA (sendmail) which then forwards everything off to iMS for delivery. Eventually I'll migrate the mailman installation I have running over to be all iMS. Majordomo and Mailman have similar interfaces with the MTA (wrapper) and since I know that Majordomo has been done with PMDF, I'm willing to bet that Mailman can be integrated with iMS. As for NMS, I am blissfully ignorant about most parts of it. I know many us in Sun can not wait until that product is EOL'd. Regards, Chad ----- Original Message ----- From: Jon Carnes <jonc(a)haht.com> Date: Wednesday, February 27, 2002 12:57 pm Subject: Re: [Mailman-Users] I Suppose that MailMan doesn't work with IPLANET/NETSCAPE Messaging? > > Thanks for your comments. At the present I have Iplanet > Messaging as > > Mail server and Apache as WebServer. > > > > The web server component is working Ok. I just followed the > > instructions. > > > > About the mail server the situation is: > > > > - The aliases for the mailing list are created. > > - Every mail for the list is redirected to the wrapper > > - I`ve tested the redirection of the mail with another script > ... and > > it worked. > > - No error appears on the iplanet logs > > - No error appears on the Mailman logs > > - UID`s are correct > > I assume you mean GID's here, since mailman does not use UID's but > does use > Group ID's to check for rights... > > > > > Anyway ... when I send an email to the list, the users never > receive it > > back! > > > > Any idea of what can be wrong, or who can I debug the process? > > > > Did you create a user called mailman and a group called mailman? > Did you > setup the crontab for the user mailman so that it runs qrunner > every minute? > What happens when you run qrunner manually (check out the cron > entries for > the valid format)? > > Jon Carnes > > > ------------------------------------------------------ > Mailman-Users maillist - Mailman-Users(a)python.org > http://mail.python.org/mailman/listinfo/mailman-users >

1 0

reverse-chronological order
by Kirez Korgan Feb. 27, 2002

Feb. 27, 2002

I would expect this is a very standard concern that people have: by default, all my archives are in chronological order -- which is patently stupid. This means that new messages accumulate toward the bottom, so on a high-volume list, you must scroll down the page to see the newest message. My question is: how can I change my archives to reverse-chronological order? I was surprised that there was no toggle for this in the admindb. cheers, Kirez

2 1

Re: [Mailman-Users] I Suppose that MailMan doesn't work with IPLANET/NETSCAPE Messaging?
by Anna Fong Feb. 27, 2002

Feb. 27, 2002

> Can anyone just tell me if it is possible put this solution to work? > IPLANET+MAILMAN+SOLARIS Yes, I have Mailman on Solaris working with iPlanet. However, I am using sendmail as the mail server. -------------------------------------------------------- Anna Q. Fong, Webmaster California Data Exchange Center

1 0

wildcards in members accepted for posting
by Jonas Meurer Feb. 27, 2002

Feb. 27, 2002

Hello, Is it possible to set wildcards in the field 'Addresses of members accepted for postings to this list without implicit approval requirement' in Privacy Options? Like every addr from domain xyz.com is allowed to post without approval requirement. If yes, how? *(a)xyz.com or xyz.com Thanks Jonas -- Du willst einen Windows-PC als Gateway für ein NetBSD-System benutzen? Benutzt du auch Nägel, um einen Hammer in die Wand zu schlagen? -- Phillipp Schulte in doc

1 0

byte-compiling mm_cfg.py?
by Charles Sebold Feb. 27, 2002

Feb. 27, 2002

Should mm_cfg.py be byte-compiled? I would think not, unless one were prepared to recompile it every time mm_cfg.py is changed. Is that correct? (Debian's default install allows one to recompile changed Python source by running "dpkg-reconfigure mailman", and it will automatically generate a .pyc of your mm_cfg file; when I realized that, I wondered if perhaps some of my old options were being propagated in place of newer ones.) -- Charles Sebold 14th of Adar, 5762 LCMS - Office of Information Systems http://unix.ois.org/ *** Opinions expressed herein are not necessarily *** *** those of the Lutheran Church - Missouri Synod ***

2 2

Odd Issues after install.
by Flint Heart Feb. 27, 2002

Feb. 27, 2002

I seem to be encountering a VERY odd issue with mailman. My system is a bit odd to start with. Its running debian stable with the 2.4 series kernel and reiserfs fs. Trying to log in as a user on the web causes a listing of allot of the contents of /dev/ . seems like several of the web interface pages work in this fashion.. I can admin things properly but users just have no luck and I don't like the idea of a script dumping a listing of the contents of my /dev/ Has anyone seen anything similar or have any suggestions for me to try. Thanks, N-Tropy

1 0

Error in Mailman 2.0.6
by Eduardo Fabian Diaz Velez Feb. 27, 2002

Feb. 27, 2002

Hello .. I Install the version 2.0.6 and gives the following error, they could help me Thank you, Fabian @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ [----- Mailman Version: 2.0.6 -----] [----- Traceback ------] Traceback (most recent call last): File "/usr/local/mailman/scripts/driver", line 66, in run_main from Mailman.Logging.StampedLogger import StampedLogger File "/usr/local/mailman/Mailman/Logging/StampedLogger.py", line 18, in ? import time ImportError: No module named time [----- Python Information -----] sys.version = 2.2 (#1, Feb 26 2002, 13:08:59) [GCC 2.95.3 20010315 (release)] sys.executable = /usr/local/bin/python sys.prefix = /usr/local sys.exec_prefix= /usr/local sys.path = /usr/local sys.platform = sunos5 [----- Environment Variables -----] PYTHONPATH: /usr/local/mailman SERVER_SOFTWARE: Apache/1.3.22 Ben-SSL/1.44 (Unix) SCRIPT_FILENAME: /usr/local/mailman/cgi-bin/admin SERVER_ADMIN: sistemas(a)salvador.edu.ar SCRIPT_NAME: /mailman/admin SERVER_SIGNATURE: REQUEST_METHOD: GET HTTP_HOST: www.mail.salvador.edu.ar SERVER_PROTOCOL: HTTP/1.1 QUERY_STRING: TZ: GMT+3 REQUEST_URI: /mailman/admin HTTP_ACCEPT: */* HTTP_USER_AGENT: Mozilla/4.0 (compatible; MSIE 6.0; Windows 98) HTTP_CONNECTION: Keep-Alive SERVER_NAME: www.mail.salvador.edu.ar REMOTE_ADDR: 200.47.54.72 REMOTE_PORT: 2288 HTTP_ACCEPT_LANGUAGE: es-ar SERVER_PORT: 80 GATEWAY_INTERFACE: CGI/1.1 HTTP_ACCEPT_ENCODING: gzip, deflate SERVER_ADDR: 10.250.6.2 DOCUMENT_ROOT: /usr/local/apache/htdocs

1 0

Delivery exception on Mailman
by Roger Wagner Feb. 27, 2002

Feb. 27, 2002

Hi I need a help for anybody because have this problem : Error Log showed this: Delivery exception: EOF read where object expected Traceback (innermost last): File: "./usrlib/mailman/Mailman/handlers/Hold.py", line 177, in process File: "./usrlib/mailman/Mailman/handlers/Hold.py", line 218,in hold_for_approval File: "./usrlib/mailman/Mailman/Listadmin.py", line 144, in HoldMessage File: "./usrlib/mailman/Mailman/Listadmin.py", line 69, in __opendb EOFError: EOF read where object expected I'm running Mailman 2.0.8, released on Nov 27 2001. Thanks, Roger Wagner ------------------------------------------------- This mail sent through IMP: correio.faccat.br

3 6