Mailman 3 November 2003 - Mailman-Users

Fw: Can't Subscribe To My List
by Rejean Proulx Nov. 4, 2003

Nov. 4, 2003

I just installed mailman and set up a mailing list. When I try to send a subscribe message locally, here is what I get. What have I forgotten to do? The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'blindetext-request(a)interfree.ca'. Subject '', Account: 'rejean', Server: 'interfree.ca', Protocol: SMTP, Server Response: '451 Cannot check <blindetext-request(a)interfree.ca> at this time - please try later', … [View More]

2 1

Re: help
by Paul H Byerly Nov. 4, 2003

Nov. 4, 2003

Chris Duggan wrote: >Hey there i have recently installed your mialing list onto my site. When i >come to test it i fill in the registration fields it comes up with a "page >cannot be displyed" > >i have put the subscription form here > >www.avrils-angel.com/mailinglist.htm > >Please could you advise us on whats going wrong? we are a little unsure >as to how your list works :/ This is not a Mailman issue. The form points to http://216.171.65.115/… [View More]

1 0

Newlist Automation script
by Kory Wheatley Nov. 3, 2003

Nov. 3, 2003

Question, has anyone developed an automation script that would create a new mailing list and subscribe users to it by reading a file. I need to develop a create that does the above process, where a mailing list and the owner is created by just reading the information provided in a file, (along with the users that need to be subscribed to the new list). This process would continually run in cron. I was planning on writing something, but I didn't know if someone else already have sometime … [View More]

1 0

Problem with archrunner using large %'s of cpu (read faq & archives)
by Jay West Nov. 3, 2003

Nov. 3, 2003

I'm using Mailman 2.1.2 on FreeBSD v4.8-Release, built using the port. MTA is sendmail 8.12.8p1 Very frequently I will see the ArchRunner process using 99+ % of cpu. I have searched the archives and found lots of messages about qrunners using large percentages of cpu, but they all seem to talk about the fixes being related to actual mail processing (sendmail), not archRunner. I am assuming that if the problem was mail delivery or reception I would be seeing the large cpu use on a different … [View More]

6 12

Can't Subscribe To My List
by Rejean Proulx Nov. 3, 2003

Nov. 3, 2003

I just installed mailman and set up a mailing list. When I try to send a subscribe message locally, here is what I get. What have I forgotten to do? The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'blindetext-request(a)interfree.ca'. Subject '', Account: 'rejean', Server: 'interfree.ca', Protocol: SMTP, Server Response: '451 Cannot check <blindetext-request(a)interfree.ca> at this time - please try later', Port: 25,… [View More]

1 0

Removing Umbrella-Like List Approvals for Moderated List
by Mark T. Valites Nov. 3, 2003

Nov. 3, 2003

(Please cc me on reply as I am not currently a list member...) Here at my institution, I have one list that is periodically synched from cron with all staff member e-mail addresses. Any request or subscription attempt from a non-staff e-mail address is rejected. All posts to the list must be approved. The list setup has worked well for the last several years, but recently some non-staff members are interested in some of the list content. The folks in places higher than I mandated the … [View More]

1 0

Threading and In-Reply-To
by McKeever Chris Nov. 3, 2003

Nov. 3, 2003

I have noticed that the threading on our archive does not work, looking through the Mailman Faq/Archive, I have learned that this is typically caused by the In-Reply-To not being supported via the Mail Client. Looking at the headers from our Mailman installation, I have confirmed that In-Reply-To is in fact missing. Looking at other Mailman list posts, I have found that the In-Reply-To seems to grab its value from the references: In-Reply-To: <1067854896.5a3ce47640987(a)toaster.best-off.… [View More]

2 1

Help
by Billy Hamm Nov. 3, 2003

Nov. 3, 2003

We have a new server running Linux 9 and Mailman is installed with it. We've setup a list but cannot get delivery from it. Is there a place where we can get support for Mailman? Thanks, Billy Hamm Denver

2 1

how do i change the all list manager passwords at the same time
by Isaac Perez Nov. 3, 2003

Nov. 3, 2003

i can change the site password with: mmsitepass <newpassword> but how do i change the list managers passwords for all the list at the same time?

2 1

Re: [Mailman-Users] Would like to move or remove some headers
by Michael Wood Nov. 3, 2003

Nov. 3, 2003

Thanks Jon, It did indeed work like magic. Mike At 08:53 AM 11/3/2003, Jon Carnes wrote: >Just edit and save the file. The next time Python runs that particular >module it will check for changes to the source - see the changed source >file - and then re-compile using the new file. It's "automagic"! > >Jon > >On Sat, 2003-11-01 at 14:06, Michael Wood wrote: > > Hi Jon, > > > > Thanks for your help with this. Once I make these changes, do I need to > … [View More]> recompile the CookHeaders.py file? If so, how do I call the compiler? > > > > Mike > > > > At 10:26 PM 10/31/2003, you wrote: > > >Edit ~mailman/Mailman/Handlers/CookHeaders.py > > >Remove any of the "list-..." headers you don't want out of the file. > > >Be sure to back up the file first! > > > > > >Jon Carnes > > > > > >If you feel more comfortable having a consultant do it, let me know > > >($60/hour @ 1hr = $60) > > >http://www.trilug.org/~jonc > > > > > >On Fri, 2003-10-31 at 22:36, Michael Wood wrote: > > > > Thanks, > > > > > > > > We're using 2.0. I'm new to using the archives; how do I find this, > how do > > > > you search for things in the archives? What string should I search for? > > > > > > > > Mike > > > > > > > > >No programming at all - if you are using version 2.1.x. The toggle > is in > > > > >the web-admin on the General options page (near the bottom). > > > > > > > > > >If your using 2.0, the archives have it laid out very nicely. It takes > > > > >all of 5 minutes to remove the headers. > > > > > > > > > >Good Luck - Jon Carnes > > > > > > > > At 06:50 PM 10/31/2003, you wrote: > > > > >On Fri, 2003-10-31 at 20:52, Michael Wood wrote: > > > > > > All of our lists are closed and our members are internal; they > > > don't need > > > > > > or want to subscribe or unsubscribe, etc. > > > > > > > > > > > > As it is, the headers and the subscribe/unsubscribe, etc. lines are > > > > > filling > > > > > > the page. We'd like to either remove them or move them below the > > > message > > > > > > area. Is there a way to do this? Does it require programming? > If so > > > where > > > > > > can I hire someone to make the modification? > > > > > > > > > > > > > > Michael Wood > > SmarTech Data Driven Solutions, Inc. > > 2455 DeWitt St. > > Clovis, CA 93612 > > 323 255-2145 > > 559 349-2806 (cell) > > 559 272-5155 (fax) > > > > Michael Wood SmarTech Data Driven Solutions, Inc. 2455 DeWitt St. Clovis, CA 93612 323 255-2145 559 349-2806 (cell) 559 272-5155 (fax) [View Less]

1 0