Mailman 3 May 2006 - Mailman-Users

Setting MIME as default for new Non-Digest subscribers
by Steve Reiter 31 Jul '11

31 Jul '11

Hi - I have searched FAQ and archives to find an answer. Hoping you can help. I have a new list (with previously imported addresses) for announcements only, and wish these announcements to be received immediately. I set the defaults to allow non-digest and to not allow digest. I wish to send out announcements in html, and so wish to make the default for new subscribers be MIME. While I see a setting under Digest Options (MIME_is_Default_Digest), I don't see any equivalent option under Non-Digest Options... and new subscribers continue to come in as plain text. QUESTIONS: In order to avoid having to manually change this option for each existing subscriber, is there a way to force all existing subscribers to receive MIME in Non-Digest mode? If not, is there a way to force all NEW subscribers to be enrolled with MIME as their default? Also, is there a way to "lock" the MIME switch on, so that users who try to change their option to plain text will be prevented from doing so? Thanks - Steve

4 3

MSN and HotMail "Eating" Messages
by fshagan 24 May '07

24 May '07

Recently, my Mailman list users who use either a HotMail or MSN.COM email address have not received any messages. Mailman does not record a "bounce" from these email addresses, but they do not receive any of the list traffic. When trying to send a message to a Mailman list, the user gets the following error message: "This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed." And it lists the Mailman list email address. However, Mailman does not receive a bounce message. (My server is not listed with SpamHaus.org, or any of the other blacklists, so it should not be a spam filter sort of thing). One user requested help from MSN, and they responded with: "You are experiencing this issue because your .Net Passport <user's email address here> Profile (which is extensively used for authentication purposes) is corrupted (not updated). In order to resolve this issue, I would suggest you to Update your .NET passport profile." They follow that with instructions to go to their MSN .NET Passport profile and re-type all the information by hand (not by cut and paste). Then a 15-step procedure is given to delete all cookies, history and temporary internet files and re-set the disk cache (space for files) to 10MB. They believe that will solve the problem but alas, it has not for the 4 users I have with MSN or HotMail email addresses. Anyone else run into this and resolved it? I didn't see anything in the archives. If any of you have users with MSN or HotMail addresses, be advised they probably will not be able to receive emails, but you will not get "bounce" messages. They only way they will know is if they try to post to a Mailman list.

3 2

Web admin slow
by Jon Harris 01 Dec '06

01 Dec '06

Hi List I have a (bit aged) Redhat 9 box (Pentium II/512Mb RAM) running Mailman 2.1.6 with Postfix. Its only has to run a single moderated mailing list sending out one email every day to around 20,000 subscribers. Sending out the emails is not problem - it works great. The major problem is logging in to approve the email. It (Apache/2.0.40) is so slow that it usually times out with a 500 error after you try and login. Is there a way of speeding up the web interface? Can I approve postings from the command line? There is a large archive as they have been running this for around 3 years. Will it speed up if we trash part of the archive. If so how can I trash archived data that is (say) over a year old? There was a thread on this problem, but it was not really resolved, and that user had 450,000 subscribers. Any help appreciated. Jon Harris

3 3

Redirect all -bounce emails
by Tom Kavanaugh 22 Sep '06

22 Sep '06

Hello Folks, I recently setup a mailman server with ver 2.1.6, and I am liking it so far. Since I am not with the IT Team of my organization, I am working around some mailman problems and this is where I need some ideas. I setup a few mail lists (including default mailman list) in name.comdomain, and worked with my IT folks to redirect <maillist>@ name.com to my mail server <mailist>@mine.name.com I do get a few <maillist-name>-bounce(a)name.com emails, and I would like to re-direct all these emails to mailman(a)name.com (or mailman(a)mine.name.com) Does someone have ideas how to accomplish this? I do not administer the company's mail servers. Folks here are not open to the list.name.com domain idea, for legacy reasons. I have a bunch of /etc/aliases entries for each of my mail lists on mine.name.com server. Is there a way I can use these alaises to re-firect <maillist-bounce>@ name.com to mailman(a)name.com Any help / ideas are appreciated. Thanks! Tom

3 11

message body is blank for some users
by Heal Secretary 03 Aug '06

03 Aug '06

Hello One of my users' messages are always sent out to list members with a blank body. I have tried unsubscribing him and resubscribing him. Same result. Most other members are posting fine (though some never bother!). What could be causing this and how can I run diagnostics to trace the problem? Or, even better, how can I fix it? I am running Mailman v 2.1.7. I am not allowed to upgrade to 2.1.8 as the installation is provided by a third party (CPanel) via my web host. Any ideas? Many thanks Nigel

4 10

Mailman move problem
by kevinc＠seaplace.org 28 Jul '06

28 Jul '06

Dear List - I recently have changed mail servers and my attempt at moving Mailman appears to have only partially succeeded. Currently: check_perms comes back fine - Good. cron is running the news_port command every 5 minutes (good cron check) -Good. The web interface works fine - all list look great - Good. Mail sent to a list appears in a qfile - Good. Qrunner is running - Good. Mailmanctrl is running - Good. Nothing is being sent to Postfix - Bad!!! Qfile In directory purged just in case, still nothing. System: Gentoo 2.6.13 running 2.6.13-gentoo.r3 kernel, 64-bit, on an AMD64 3000. Postfix - but nothing fancy - no virtual domains, etc. Mailman 2.1.5-r3 build via emerge into the standard location Help!!! <with a smile> Kevin

3 5

accepting posts based on a header-field
by IEM - network operating center 05 Jul '06

05 Jul '06

hi. i have searched the faq and asked google but haven't found anything for my problem (so forgive me if i missed something obvious): my basic problem is, that i want to forward mails from one mailing list to another (on both lists only subscribers can post): the setting is as follows: there is an "announce"-list and a "users"-list; mails going to the "announce"-list should also go to the "users"-list, so people don't have to subscribe to both lists the subscribers to both lists overlap, but there are a lot of users subscribed to only one of them. so my first attempt was, to just subscribe "users" to the "announce" list, but as soon as somebody who is subscribed to "announce" but NOT to "users" posts to the announce-list, the mail is held for approval in the "users" list. this is rather inconvenient. so my second thought was to auto-accept postings to the "users" list which has a special header-field (i thought that the "List-ID"-field would just be ok for my purposes). unfortunately i found that this wasn't possible (i am running debian and tried both 2.1.5-8sarge2 (which is basically 2.1.5 with some cross-site-scripting security issues fixed) and 2.1.8) the only header-field i found which could be used for auto-accepting is the the "Approved: <moderator-password>". so i did a quick hack to handle this at the MTA-level <sidenote> i didn't want to patch mailman itself, because this is only a rather long-term solution: wait until the patch gets accepted upstream; then wait until the upstream version is in debian (and with the debian way of releasing this will take years until it is in the stable branch which i prefer for my servers); in the meantime i could either run the newest mailman release (from source) or patch each and every security update of the debian-package. </sidenote> basically now my working setting is like this (using mailman, exim4, procmail) "users" is subscribed to "announce". mails for "users" are not directly delivered to the mailman-wrapper by the MTA but instead it is first piped through procmail. if any mail directed to "users" appears to come from "announce" (based on the "List-ID" header field) i add another header "Approved: <mod-pw>" with formail, before it gets delivered to the mailman-wrapper for "users". of course this is not very secure (but not much less secure then accepting mails based on the "From:" field) however, since this was a bit of work and somewhat hackish (though only configuration and no patching was involved) my question is: is there as simpler way to acchieve this? would an option for each mailing list to auto-accept mails with a special header (perferrably a regex) make sense (feature-request)? or - if my setup is of some use for others - should i post a short howto somewhere (where)? mfg.asd.r IOhannes

2 2

Custom footer based on sender's email
by Rob Jackson 29 Jun '06

29 Jun '06

I need to figure out how to add a footer to an e-mail coming from a specific user. I just can't seem to figure this out. I have created a module to weed out the address, but now I need to munge the body of the message. -Rob

4 22

spamming of my list
by Louis Headley 19 Jun '06

19 Jun '06

I have started to receive spam to my list. While my members are not recieving them (all posts must be approved), is there a way to discard all requests at once? At the moment, I must go thru the list one by one. THere as many as 40 per week. How can i stop people from spam my list? Help?

3 7

language encoding for archives
by kristina clair 02 Jun '06

02 Jun '06

Hello, I've noticed that changing the language preference for a list will change the character set for the list pages, but not for the archives. Do I need to modify the archive templates in order to have the archive pages use the same character set? Or is there another way? Thanks, Kristina

2 7

Mailman-Users May 2006