Mailman 3 December 2009 - Mailman-Users

2 Emails
by Fitzpatrick, Ted Dec. 21, 2009

Dec. 21, 2009

Hi, Why do some subscribers receive 2 emails from the mailing list? 1 email from listname@ourdomain, and a duplicate message from listname-bounces@ourdomain ? Thanks! Ted

2 1

Trouble enabling HTML messages.
by Steve Dec. 21, 2009

Dec. 21, 2009

Hi. I have a mailing list running in GNU Mailman version 2.1.11 I would like for my users to be able to send HTML emails to the list. In the section called "Content Filtering" I checked "No" to the question ++++++++++++++++++ Should Mailman convert text/html parts to plain text? This conversion happens after MIME attachments have been stripped. +++++++++++++++++++ And I checked "No" for the question ++++++++++++++++++++++ Should Mailman collapse multipart/alternative to its first part content? (Edit collapse_alternatives) ++++++++++++++++++++++++ No luck. The HTML still gets strippped . Is there anything else I can try? Thanks in advance Steve

2 1

Site administrative broadcast to all lists and all list members - server wide
by Brandon Rodak Dec. 21, 2009

Dec. 21, 2009

I have searched for a way to send a "server-wide" broadcast message to all admins and subscribers and found the following (which I have yet to try): "Send a message with an Urgent: header that contains the admin password and it's supposed to be sent as a direct message to all subscribers" What I find a but confusing is how to specify an "Urgent" header. Does this person mean to say place "Urgent" in the subject line with the Admin password? In other words, I am not sure how to specify or manipulate a message's "header" with Mailman. Anybody have any ideas/thoughts or am I missing something obvious? Thanks for any and all help - Brandon

3 3

glitch or something I missed?
by Hicks, Robert CTR Dec. 21, 2009

Dec. 21, 2009

I setup mailman and I have a user that sent me the following: === I am the list administrator for several deckplates in District 13. Yesterday I had 2 submissions (different subjects) by the same person to 3 different deckplates. When I went to approve them, both messages were there but there was only one big box covering both messages to approve, discard, etc. Usually there is a separate approval box for each message. Anyway, I checked approve on all 3 deckplates, but only the message with the earliest date was released. I've never had this happen before. Usually there is an approval box for each message and I have released several at once in the past. Is this a glitch in the system? === Did I miss a config option maybe? Bob

2 1

Iphone and Mailman
by Jan Behrens Dec. 19, 2009

Dec. 19, 2009

Hello, I'm using mailman 2.1.9 on a suse11 linux server with qmail und i found a strange behaviour: whenever i send an email to the list via the mail.app on my IPhone, sent images are lost. when i send the same email to that list with Mail on my macbook, everything is okay. since mail works normally and mail.app send its pictures via email to other people, it seems to be a small problem with the parsing of an iphone mail. Is there anything known about that or a workaround? i googled und used your manuals but haven't found anything. best regards Jan

3 2

Re: [Mailman-Users] Hello List
by b19141＠anl.gov Dec. 18, 2009

Dec. 18, 2009

Wayne Cook <wcook(a)mycoachonline.com> wrote: >Here's my first post to this list :) > >I'm setting up a mailing list and I only want the list administrator >to be able to post messages to the list, can this be set as some kind >of default setting? > >Thanks >Wayne Change the list configuration so that all subscribers are moderated. And then set each current subscriber to "moderated" via one click on the membership admin web page. ---------------------------------------------------------------------- Barry S. Finkel Computing and Information Systems Division Argonne National Laboratory Phone: +1 (630) 252-7277 9700 South Cass Avenue Facsimile:+1 (630) 252-4601 Building 240, Room 5.B.8 Internet: BSFinkel(a)anl.gov Argonne, IL 60439-4828 IBMMAIL: I1004994

6 11

Code comments
by Lindsay Haisley Dec. 18, 2009

Dec. 18, 2009

Given that definitive documentation for Mailman isn't really consolidated in one place, I often find that the code comments in the Mailman program files (~mailman/Mailman/*) can be very helpful in answering questions or solving problems with Mailman. I've worked with code in many languages that is so cryptically commented, with variable names that were so non-descriptive (Dan Bernstein's qmail code comes to mind) as to be totally useless if one wanted to look under the hood for help. Mailman code is quite the opposite - well organized with copious comments which can be very helpful if one knows even a little about the program structure. Even if you don't grok python, or OO programming, there's a lot to be learned here. -- Lindsay Haisley | "Everything works | PGP public key FMP Computer Services | if you let it" | available at 512-259-1190 | (The Roadie) | http://pubkeys.fmp.com http://www.fmp.com | |

2 1

Searching across lists and making global changes
by Brian Luria Dec. 18, 2009

Dec. 18, 2009

Have multiple mailing lists under one domain Is there any way to search across all lists for a certain member and make a global change to their email or name? As an administrator, if a user changes their email, I often have to search each list for the member to locate them (1) and then change their info (2) Thank you. -- Brian J. Luria DVM, DACVIM Bluepearl Veterinary Partners Florida Veterinary Specialists Tampa: (813) 933-8944 Clearwater: (727) 572-0132 Brandon: (813) 571-3303 www.bluepearlvet.com

3 3

Re: [Mailman-Users] Error running bin/mailmanctl restart
by Paul Kleeberg Dec. 17, 2009

Dec. 17, 2009

Mark has been helping me with this off-line but I thought I would send this to the list to see if there are others who are aware of the solution. I have been using the following on a clean install of Mac Server 10.5.8 and upgrading Mailman 2.1.9 to 2.1.12: ./configure --prefix=/usr/share/mailman --with-cgi-gid=_www --with-mail-gid=mail --with-mailhost=domain.com --with-urlhost=domain.com --with-var-prefix=/var/mailman --with-groupname=_mailman and get the following error: ***** Installation directory /var/mailman is not configured properly! ***** Directory must be owned by group _mailman: /var/mailman /var/mailman is has the settings root:wheel while the files inside are root:_mailman. Do I need to change the group of the /var/mailman directory for the install? I know that change is probably not significant, but I an not sure enough of my knowledge to know. Once I get this right, I plan on upgrading a 10.6.2 production server running 2.1.12rc1 to 2.1.12. Thanks! Paul -- Paul Kleeberg paul(a)fpen.org On Dec 16, 2009, at 3:53 PM, Mark Sapiro wrote: > Paul Kleeberg wrote: > >> You are correct. /var points to /private/var but /private/var/mailman >> is owned by root:wheel. Should I chgrp to _mailman which is the group >> of all the files inside or use >> >> --with-groupname=wheel > > > As long as the subordinate directories are all group _mailman and > SETGID, the group of var-prefix itself doesn't matter. > > And you should configure with --with-groupname=_mailman to match the > group of the existing install.

5 8

Help with an error
by Paul Kleeberg Dec. 17, 2009

Dec. 17, 2009

Migrated mailman from one box to another with a slight name change on the virtual hosts. Ran: 3) bin/withlist -l -r fix_url <listname> -u <www.domain.tld> to fix the web page URLs 4) 'bin/arch --wipe' 5) 'bin/genaliases' to create the alias file. In attending to a subscription request to a sunsetted list (the request came before the migration) via the web interface, I received an error. Here is the mailman error log (I have modified e-mail addresses and the domain name): Dec 13 08:35:55 2009 admin(81221): @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ admin(81221): [----- Mailman Version: 2.1.12rc1 -----] admin(81221): [----- Traceback ------] admin(81221): Traceback (most recent call last): admin(81221): File "/usr/share/mailman/scripts/driver", line 112, in run_main admin(81221): main() admin(81221): File "/BinaryCache/mailman/mailman-132~28/Root/usr/share/mailman/Mailman/Cgi/admindb.py", line 164, in main admin(81221): File "/BinaryCache/mailman/mailman-132~28/Root/usr/share/mailman/Mailman/Cgi/admindb.py", line 773, in process_form admin(81221): AttributeError: 'str' object has no attribute 'get' admin(81221): [----- Python Information -----] admin(81221): sys.version = 2.6.1 (r261:67515, Jul 7 2009, 23:51:51) [GCC 4.2.1 (Apple Inc. build 5646)] admin(81221): sys.executable = /usr/bin/python admin(81221): sys.prefix = /System/Library/Frameworks/Python.framework/Versions/2.6 admin(81221): sys.exec_prefix = /System/Library/Frameworks/Python.framework/Versions/2.6 admin(81221): sys.path = /System/Library/Frameworks/Python.framework/Versions/2.6 admin(81221): sys.platform = darwin admin(81221): [----- Environment Variables -----] admin(81221): HTTP_REFERER: http://www.mydomain.com/mailman/admindb/cds-mneug admin(81221): VERSIONER_PYTHON_PREFER_32_BIT: no admin(81221): SERVER_SOFTWARE: Apache/2.2.13 (Unix) mod_ssl/2.2.13 OpenSSL/0.9.8k PHP/5.3.0 admin(81221): SCRIPT_NAME: /mailman/admindb admin(81221): SERVER_SIGNATURE: <address>Apache/2.2.13 (Unix) mod_ssl/2.2.13 OpenSSL/0.9.8k PHP/5.3.0 Server at www.mydomain.com Port 80</address> admin(81221): admin(81221): REQUEST_METHOD: POST admin(81221): PATH_INFO: /cds-mneug admin(81221): HTTP_ORIGIN: http://www.mydomain.com admin(81221): SERVER_PROTOCOL: HTTP/1.1 admin(81221): QUERY_STRING: admin(81221): CONTENT_LENGTH: 68 admin(81221): HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_2; en-us) AppleWebKit/531.21.8 (KHTML, like Gecko) Version/4.0.4 Safari/531.21.10 admin(81221): HTTP_CONNECTION: keep-alive admin(81221): HTTP_COOKIE: cds-mneug+admin=280200000069abfb244b732800000034333533356532663261346266343665306538363832656532373233366562336164363434613735; himss-cpoe+admin=2802000000693ffb244b732800000062393066626336636632356230643436303966616139343438303762323736373235643530616237; __utma=235507584.16807.1171413544.1260036906.1260212869.32; __utmz=235507584.1258473236.29.5.utmcsr=myhq.com|utmccn=(referral)|utmcmd=referral|utmcct=/ admin(81221): SERVER_NAME: www.mydomain.com admin(81221): REMOTE_ADDR: 192.168.1.7 admin(81221): PATH_TRANSLATED: /Library/WebServer/mydomain/cds-mneug admin(81221): SERVER_PORT: 80 admin(81221): SERVER_ADDR: 192.168.1.1 admin(81221): DOCUMENT_ROOT: /Library/WebServer/mydomain admin(81221): HTTP_X_COLLABORATION_WIKIS: Enabled admin(81221): PYTHONPATH: /usr/share/mailman admin(81221): SCRIPT_FILENAME: /usr/share/mailman/cgi-bin/admindb admin(81221): SERVER_ADMIN: admin(a)mydomain.com admin(81221): SCRIPT_URI: http://www.mydomain.com/mailman/admindb/cds-mneug admin(81221): HTTP_HOST: www.mydomain.com admin(81221): SCRIPT_URL: /mailman/admindb/cds-mneug admin(81221): REQUEST_URI: /mailman/admindb/cds-mneug admin(81221): HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 admin(81221): GATEWAY_INTERFACE: CGI/1.1 admin(81221): REMOTE_PORT: 54251 admin(81221): HTTP_ACCEPT_LANGUAGE: en-us admin(81221): HTTP_X_COLLABORATION_BLOGS: Enabled admin(81221): __CF_USER_TEXT_ENCODING: 0x46:0:0 admin(81221): VERSIONER_PYTHON_VERSION: 2.6 admin(81221): CONTENT_TYPE: application/x-www-form-urlencoded admin(81221): HTTP_ACCEPT_ENCODING: gzip, deflate I am wondering, was this error due to the migration and I do not need to do anything, or is there something else I need to do? Paul -- Paul Kleeberg paul(a)fpen.org

2 3