Mailman 3 December 2009 - Mailman-Users

Hello List
by Wayne Cook Dec. 16, 2009

Dec. 16, 2009

Here's my first post to this list :) I'm setting up a mailing list and I only want the list administrator to be able to post messages to the list, can this be set as some kind of default setting? Thanks Wayne

3 2

Re: [Mailman-Users] Web interface domain woes
by Gary R. Schmidt Dec. 15, 2009

Dec. 15, 2009

On Tue, December 15, 2009 13:25, Stephen J. Turnbull wrote: > Barry Warsaw writes: > > On Dec 14, 2009, at 02:58 PM, Mark Sapiro wrote: > > > > >Run fux_url? > > > > Freudian slip? :) > > Definite "Typo of the Month" candidate! > Nah, he's just a closet Kiwi![1] Cheers, Gary B-) 1 - New Zealanders, called "Kiwis", have an accent that says "fush and chups".

1 0

Web interface domain woes
by John Lieber Dec. 15, 2009

Dec. 15, 2009

I nearly complete setting up my new list server however I am running into a problem with the web interface. The interface is resolving to a different FQDN than what I want. I have edited the mm_cfg_py and restarted mailman (added DEFAULT_URL_HOST and DEFAULT_MAIL_HOST) and am at a loss as to what to do next.... Thank you in advance, Johnathen (Host: OS X Tiger, Mailman 2.1.11, Postfix) Postfix resolves to the correct domain and can send/receive emails...

4 3

Error running bin/mailmanctl restart
by Paul Kleeberg Dec. 15, 2009

Dec. 15, 2009

In my migration of a MacOS 10.5.8 server from mailman 2.1.9 to 2.1.12, I discovered I had to install Python 2.5.4 and XCode 3.2.1 to get a compiler. It compiled with the command: /configure --prefix=/usr/share/mailman --with-cgi-gid=_www --with-mail-gid=mail --with-mailhost=domain.com --with-urlhost=domain.com But now when I try and run I get: server:mailman-2.1.12 paul$ sudo /usr/share/mailman/bin/mailmanctl restart Restarting Mailman's master qrunner PID unreadable in: /usr/share/mailman/data/master-qrunner.pid [Errno 2] No such file or directory: '/usr/share/mailman/data/master-qrunner.pid' Is qrunner even running? I find the .pid file in: /private/var/mailman/data/master-qrunner.pid Should I be adding something to the configure command? Paul -- Paul Kleeberg paul(a)fpen.org

2 1

Mass Removal
by certuspersonality Dec. 14, 2009

Dec. 14, 2009

I am unable to use commands on my server, so I am looking for a way to mass-remove all subscribers from a given list. As I can view all list subscribers on a long screen, the easiest for me would be to mark the individual subscribers in the column 'unsub', but it would take a long time to this for each member individually. Is it possible to mark all members in the 'unsub' column in one go? Herward

4 3

Mailman 2.1.13rc1 released
by Mark Sapiro Dec. 14, 2009

Dec. 14, 2009

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I am happy to announce the first release candidate of Mailman 2.1.13. Mailman 2.1.13 is a bug fix release and contains a new localization for the Asturian language. Python 2.4 is the minimum supported, but Python 2.5.or 2.6 is recommended. See the changelog at <https://launchpad.net/mailman/2.1/2.1.13rc1> for more details. Mailman is free software for managing email mailing lists and e-newsletters. Mailman is used for all the python.org and SourceForge.net mailing lists, as well as at hundreds of other sites. For more information, please see: http://www.list.org http://www.gnu.org/software/mailman Mailman 2.1.13 can be downloaded from https://launchpad.net/mailman/2.1/ http://ftp.gnu.org/gnu/mailman/ Note to translators: The mailman.pot is up to date in this release and has been merged with the individual message catalogs. If possible, please review your translations and submit any changes before December 21 if you want to get them in the 2.1.13 final release. - -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (MingW32) iEYEARECAAYFAksmk3EACgkQVVuXXpU7hpMFvQCdFQV4sgxkVEDuUNlgiNALXe6/ 3jYAnAn/5+SQSPby3c3eG7MJhC187cA6 =Pby4 -----END PGP SIGNATURE-----

1 0

Distutils is not available or is incomplete for /usr/bin/python
by Paul Kleeberg Dec. 14, 2009

Dec. 14, 2009

I am upgrading a MacOSX 10.5.8 Server with Mailman 2.1.9 to 2.1.12. In attempting to ./configure mailman, I encounter the following: Distutils is not available or is incomplete for /usr/bin/python Here is the version information I have on Python: Python 2.5.1 (r251:54863, Feb 6 2009, 19:02:12) [GCC 4.0.1 (Apple Inc. build 5465)] on darwin Suggestions on how to proceed? I have marginal skills. Paul -- Paul Kleeberg paul(a)fpen.org

1 0

Creating aliases for moved lists
by Paul Kleeberg Dec. 13, 2009

Dec. 13, 2009

I have moved several lists to a new box with virtual domains. I have moved /archives and /lists, used with_list and fix_url but I remembered something about aliases and looked and saw ~/mailman/data/aliases does not contain the moved lists. Is that a manual build, a command I should run, or is there something else I can do to merge the two files? Paul -- Paul Kleeberg paul(a)fpen.org

3 2

How to get relative paths in MM admin/moderator links?
by skip＠pobox.com Dec. 12, 2009

Dec. 12, 2009

We're running MM 2.1.9 at work. I noticed much to my chagrin today that all the links in the admin interface appear to be absolute URLs. At work they have this annoying habit of never using the FQDN for hosts, so our MM machine is just "lists". I can edit the URL to use the FQDN and thus get to the website via our VPN, but all the links are still http://lists/mailman/... Is there some way to tell MM to use relative URLs or at least to not include the http://hostname part? Thanks, -- Skip Montanaro - skip(a)pobox.com - http://www.smontanaro.net/

2 2

Moving lists on one box with several virtual hosts
by Paul Kleeberg Dec. 11, 2009

Dec. 11, 2009

I have several Mailman lists on one box that has several virtual sites. I need to move them to a new box and I want to change the web address for users to manage their addresses from virtual1.tld to www.virtual1.tld. Looking at both config_list and with_list, I do not see a way to do that. I see how I may assign a domain for the list, but not one that assigns a domain for the web address to the list. I would not think I needed to do this but whenever I try and access the list page with virtual1.tld it succeeds and it fails with www.virtual1.tld. Thanks for any help you can provide. Paul -- Paul Kleeberg paul(a)fpen.org

2 1