Mailman 3 April 2011 - Mailman-Users

Running two list with same email prefix
by Andrea Cappelli Feb. 27, 2024

Feb. 27, 2024

Hi all, I'm running a mail server with Debian Lenny, MTA is Postfix and i will use postfix-to-mailma.py script to run list I would set up Mailman for running mailing list with same email prefix on different domains, obvious with different list names For example we have ml.domain1.com and ml.domain2.net, i would like to have LISTADDRESS LISTNAME tech(a)ml.domain1.com tech-ml.domain1.com tech(a)ml.domain.2.net tech-ml.domain2.net In this way i can have the same address on differente … [View More]

4 5

Hide list address?
by Ricardo Kleemann Nov. 16, 2023

Nov. 16, 2023

Hi, Is there any way to configure Mailman such that, for an announcement-only type list, when a message is sent to the list, the To: shows the member's address, rather than the list address? Some list software allows the ability to hide the list address itself, so that address is not advertised. I couldn't find any configuration specific to that.

7 6

Add "sender's name/email" to BODY of mail as header?
by Mal Feb. 16, 2021

Feb. 16, 2021

I want all mails sent to the list to come from the list's email address... But, in this case, if the user forgets to sign their name at the bottom of their mail body, effectively the mail to the list is anonymous...! Is there a way to add the user name (or email address) to the top of each mail so that the mails have the name of the sender, while the mail itself comes from the list address? I have looked high and low for an answer, but noone seems to have the solution. Thank you! Mal

9 14

Mailman CGI Error-Group mismatch error
by Wang, Mary Y Sept. 9, 2020

Sept. 9, 2020

Hi, I received the following error this morning. So I rerun configure again with the following command: ./configure --with-cgi-id=apache --prefix=/var/mailman. I'm still getting the same error. Is there any place that I can look for so that I can debug this problem better? Perhaps, looking at the config history file or something. Any other places that I can check the cause of this error? "Mailman CGI error!!! The Mailman CGI wrapper encountered a fatal error. This entry is being stored … [View More]

3 3

Setting MIME as default for new Non-Digest subscribers
by Steve Reiter July 31, 2011

July 31, 2011

Hi - I have searched FAQ and archives to find an answer. Hoping you can help. I have a new list (with previously imported addresses) for announcements only, and wish these announcements to be received immediately. I set the defaults to allow non-digest and to not allow digest. I wish to send out announcements in html, and so wish to make the default for new subscribers be MIME. While I see a setting under Digest Options (MIME_is_Default_Digest), I don't see any equivalent option under … [View More]

4 3

Mailman list sends but doesn't receive mail.
by JRC Groups May 10, 2011

May 10, 2011

Hello, All. I've just set up my first Mailman mailing list in OS X Server. It sends mail as welcome notifications were received by several different members subscribed to the mailing list. However, it doesn't seem to be receiving e-mail. All attempts I've made have resulted in Delivery Failure Notifications. This is the text returned with this Delivery Failure Notifications: > Delivery to the following recipient failed permanently: > > list(a)3domain.com > > Technical … [View More]

4 42

per-list personalization without enabling OWNERS_CAN_ENABLE...
by William Yardley May 3, 2011

May 3, 2011

http://wiki.list.org/pages/viewpage.action?pageId=4030545 seems to suggest that it's possible to enable personalization (for headers / footers of messages), without enabling VERP itself (for the envelope-sender of messages). Is that correct? Some of the mailing list messages I have seen seem to imply that you have to also Also, is it possible to toggle personalization under the hood (using withlist / config_list to set 'mlist.personalize = 2') /without/ enabling … [View More]

2 4

RELEASED: Mailman 3.0 alpha 7
by Barry Warsaw April 30, 2011

April 30, 2011

I am very happy to announce the release of the seventh alpha for Mailman 3.0, code named "Mission". Here are some of the highlights of a release with lots of new stuff (a more detailed NEWS.txt file excerpt is below). * Significant improvements to the subscription model. Users can now subscribe to mailing lists with either an explicit address or a "preferred" address. When a user changes her preferred address, all of her subscriptions automatically track this change. All this and more … [View More]have also all been exposed to the REST API. * New rules for member and non-member moderation. This effectively ports and updates Mailman 2's moderation rules to the Mailman 3 framework. * Support for SMTP AUTH added. * The default password encryption scheme can be defined in the configuration file, and all passwords are by default encrypted (using SSHA1). * 'bin/mailman status' command added to provide command line status of the master queue runner process. * 'bin/mailman info' now prints the REST API root url and credentials. * Basic Auth support for the REST API was added. (thanks Jimmy Bergman) * Python 2.7 is supported. I'm really excited about this release because it will provide a great baseline for our Google Summer of Code students. If you've been putting off taking a look at Mailman 3, I encourage you to download it and play with it. My goal is for a final release on 11.11.11 so there will not be too many more alphas. Now is the best time to influence our design decisions. The tarball can be downloaded from Launchpad or the Cheeseshop: https://launchpad.net/mailman http://pypi.python.org/pypi/mailman The full documentation is also online: http://packages.python.org/mailman/docs/README.html Enjoy, -Barry 3.0 alpha 7 -- "Mission" ======================== (2011-04-29) Architecture ------------ * Significant updates to the subscription model. Members can now subscribe with a preferred address, and changes to that will be immediately reflected in mailing list subscriptions. Users who subscribe with an explicit address can easily change to a different address, as long as that address is verified. (LP: #643949) * IUsers and IMembers are now assigned a unique, random, immutable id. * IUsers now have created_on and .preferred_address properties. * IMembers now have a .user attribute for easy access to the subscribed user. * When created with add_member(), passwords are always stored encrypted. * In all interfaces, "email" refers to the textual email address while "address" refers to the `IAddress` object. * mailman.chains.base.Chain no longer self registers. * New member and nonmember moderation rules and chains. This effectively ports moderation rules from Mailman 2 and replaces attributes such as member_moderation_action, default_member_moderation, and generic_nonmember_action. Now, nonmembers exist as subscriptions on a mailing list and members have a moderation_action attribute which describes the disposition for postings from that address. * Member.is_moderated was removed because of the above change. * default_member_action and default_nonmember_action were added to mailing lists. * All sender addresses are registered (unverified) with the user manager by the incoming queue runner. This way, nonmember moderation rules will always have an IAddress that they can subscribe to the list (as MemberRole.nonmember). * Support for SMTP AUTH added via smtp_user and smtp_pass configuration variables in the [mta] section. (LP: #490044) * IEmailValidator interface for pluggable validation of email addresses. * .subscribe() is moved from the IAddress to the IMailingList * IAddresses get their registered_on attribute set when the object is created. Configuration ------------- * [devmode] section gets a new 'testing' variable. * Added password_scheme and password_length settings for defining the default password encryption scheme. * creator_pw_file and site_pw_file are removed. Commands -------- * 'bin/mailman start' does a better job of producing an error when Mailman is already running. * 'bin/mailman status' added for providing command line status on the master queue runner watcher process. * 'bin/mailman info' now prints the REST root url and credentials. * mmsitepass removed; there is no more site password. REST ---- * Add Basic Auth support for REST API security. (Jimmy Bergman) * Include the fqdn_listname and email address in the member JSON representation. * Added reply_goes_to_list, send_welcome_msg, welcome_msg, default_member_moderation to the mailing list's writable attributes in the REST service. (Jimmy Bergman) * Expose the new membership model to the REST API. Canonical member resource URLs are now much shorter and live in their own top-level namespace instead of within the mailing list's namespace. * /addresses/<email>/memberships gets all the memberships for a given email address. * /users is a new top-level URL under which user information can be accessed. Posting to this creates new users. * Users can subscribe to mailing lists through the REST API. * Domains can be deleted via the REST API. * PUT and PATCH to a list configuration now returns a 204 (No Content). Build ----- * Support Python 2.7. (LP: #667472) * Disable site-packages in buildout.cfg because of LP: #659231. * Don't include eggs/ or parts/ in the source tarball. (LP: #656946) * flufl.lock is now required instead of locknix. Bugs fixed ---------- * Typo in scan_message(). (LP: #645897) * Typo in add_member(). (LP: #710182) (Florian Fuchs) * Re-enable bounce detectors. (LP: #756943) * Clean up many pyflakes problems; ditching pylint. [View Less]

2 2

Call for volunteers: convert wiki to Moin
by Barry Warsaw April 29, 2011

April 29, 2011

For many years, Atlassian has provided the GNU Mailman project with free (as in beer) wiki hosting on their proprietary platform. This has included a free license, free hosting, and free support. We are very grateful to them for this, as our wiki contains lots of useful information that help you, the members of our Mailman community. The current wiki was offered to us at a time when we didn't really have any other options. However, GNU Mailman is free software and a GNU project, so it is … [View More]

1 0

Question about excessive bounces
by Mike.Mcrae＠csiro.au April 29, 2011

April 29, 2011

Hi, I administrate two Mailman mailing lists at ScienceByEmailHTML and ScienceByEmailPlain. We have approximately 39 000 addresses in the former list, and about 1000 in the latter. I have a question about the bounces we receive. We have the lists set so after five bounces, the address is automatically disabled. An notification is sent alerting us to the disabled account, where we then delete the address from our own records as well as Mailman. Depending on the week, we can get over a hundred … [View More]

3 3