Mailman 3 December 2015 - Mailman-Users

Hide list address?
by Ricardo Kleemann 16 Nov '23

16 Nov '23

Hi, Is there any way to configure Mailman such that, for an announcement-only type list, when a message is sent to the list, the To: shows the member's address, rather than the list address? Some list software allows the ability to hide the list address itself, so that address is not advertised. I couldn't find any configuration specific to that.

7 6

Using cronjob to remove and add members to a mailing list
by Jerry Barnabee 10 Aug '22

10 Aug '22

I want to be able to run a cronjob on my server that uses a php script to add new users and/or remove users from a mailing list. Not having any luck finding any simple examples. My thought is that the php script would get email addresses from a database (which I can do) and then feed them to a mailman command line to either add or remove a user. The cronjob is entered via Cpanel. Have several cronjobs that modify databases but have never tried something that would actually execute a unix command. Thanks, Pineyscripter

3 3

Add "sender's name/email" to BODY of mail as header?
by Mal 16 Feb '21

16 Feb '21

I want all mails sent to the list to come from the list's email address... But, in this case, if the user forgets to sign their name at the bottom of their mail body, effectively the mail to the list is anonymous...! Is there a way to add the user name (or email address) to the top of each mail so that the mails have the name of the sender, while the mail itself comes from the list address? I have looked high and low for an answer, but noone seems to have the solution. Thank you! Mal

9 14

Mailman CGI Error-Group mismatch error
by Wang, Mary Y 09 Sep '20

09 Sep '20

Hi, I received the following error this morning. So I rerun configure again with the following command: ./configure --with-cgi-id=apache --prefix=/var/mailman. I'm still getting the same error. Is there any place that I can look for so that I can debug this problem better? Perhaps, looking at the config history file or something. Any other places that I can check the cause of this error? "Mailman CGI error!!! The Mailman CGI wrapper encountered a fatal error. This entry is being stored in your syslog: Group mismatch error. Mailman expected the CGI wrapper script to be executed as group "nobody", but the system's web server executed the CGI script as group "apache". Try tweaking the web server to run the script as group "nobody", or re-run configure, providing the command line option `--with-cgi-gid=apache'." Thanks Mary

3 3

changing domains on Mailman implementation
by Keith Seyffarth 20 Sep '18

20 Sep '18

Is there an efficient way to change the domain name that mailman is affiliated with? I have two mailing lists that were created for an organization before that organization had their own domain. At the time the organization was sure they did not want their own domain and would not be getting a domain. Since then, they have chosen to get a domain and set up a web site. I would like to move their mailing lists onto their domain. It looks like the process for this is: 1) get the list of subscribers 2) delete the mailing list from the one domain (losing the archives) 3) create the mailing list on the new domain 4) subscribe the list of subscribers This process doesn't seem too difficult, but I would prefer to keep the archives, if possible. Both domains are on the same server, running CentOS7 and PLESK 12.5, if that makes a difference. Thanks, Keith

2 2

DMARC hack
by Allan Hansen 10 Apr '16

10 Apr '16

Hi, I have waited almost a year for AOL and Yahoo to admit that they messed up and to remove their DMARC policy. My AOL and Yahoo subscribers are pretty upset at me because I won’t let them post. A number now have two subscriptions, one for posting (from GMail) and another for receiving the messages. So against my better judgement, I included this hack in Cleanse.py; 22c22 < from email.Utils import formataddr, parseaddr — >from email.Utils import formataddr 69,74d68 < < # Added to deal with DMARC issuej < name, addrs = parseaddr(msg.get('from')) < addrs += '.invalid' < del msg['from'] < msg['from'] = formataddr((name, addrs)) \ No newline at end of file I found it in the discussion list. I don’t get compile errors, but Cleanse.pyc is not being updated. I have stopped and restarted Mailman and I have also rebooted, but same non-action. I have not tried ‘compileall’ and am not eager to, either (permissions, where to invoke, etc). Any suggestions? The host OS is Mac OS X Server 10.5.8 with Mailman 2.1.14 Yours, Allan

5 15

mails send from sendmail with commandline to mailman become 'Message has implicit destination'
by MichaelLeung 29 Dec '15

29 Dec '15

hi all anyone had face this problem before ? if i send the mail from a client end , like thunder, mailman can read it correctly .

3 36

Re: [Mailman-Users] Moderated approval via email
by Adrian Pepper 21 Dec '15

21 Dec '15

I struggled with this problem until I unearthed this gem from the archive. In addition we were using aliases as moderators, so I thought that was the key problem, but subsequent testing suggests there is no such restriction. Is that correct? So it is alright to use an alias as list administrator or moderator, but moderator recipients must simply know the "trick" of replying to the contained message, not the overall message. I usually use an "heirloom-mailx"-like MUA and I assumed it was not smart enough to generate correct headers. But now I'm reasonably sure I could create a working response to the sub-message in a number of ways. I have a means to save a message into a mailbox where I can view it with Thunderbird on my workstation. But I don't really use Thunderbird much, mostly just to look at messages heavy with graphics and other noise. Took me a while to work out that you need to "Open all attachments" (somewhat hidden in a non-obvious menu, and there didn't seem to be a selective option) which would give you a window you could reply to. And voila! I finally managed to get that pending posting to disappear! And after I removed my email address from both owner and moderator boxes, I still seemed to be able to dicard another pending posting. I struggled so long with this I thought I'd post my dumpster diving and added observations in case it helped anyone else. I didn't find anything like the following in a FAQ. Note also, that this moderation message is a multipart/mixed message and the part that says "If you reply to this message, keeping the Subject: header intact ..." is it's own message/rfc822 part and it's that message part you must reply to with the Approved: <password> line, not the "outer" message. Perhaps mention of this should be added. My apologies if it's already there and my web and keyword searches overlooked it. Now I know what to look for, I find more recent coverage on the list. https://www.mail-archive.com/mailman-users@python.org/msg64564.html (May 2014) Adrian. Mark Sapiro msapiro at value.net wrote Thu Feb 10 01:58:46 CET 2005 > > Previous message: [Mailman-Users] Moderated approval via email > Next message: [Mailman-Users] Auto Subscriptions to Mailman list > Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] > > Pantejo, Barbara FTL wrote: > > > >As the list admin/moderator, I received an email to approve a posting to a > >particular mailing list, but the instructions on approving via a reply email > >is confusing: > > > >"If you reply to this message and include an Approved: header with the list > >password in it, the message will be approved for posting to the list. The > >Approved: header can also appear in the first line of the body of the > >reply." > > > >What does "header" mean and where on a reply email does it exist? Does > >"header" mean the Subject line? > > > >Does this mean one of the following?: > >1) Clear out the Subject line of the email and place "Approved:{list > >password}" > > No. > > >2) Reply with the Subject line intact and place "Approved:{list password}" > >as the first line of the reply message. > > Yes > > >3) Something else... > > If your MUA allows it, you can actually add the Approved: <password> > line in the headers of the reply as a separate header, not in the > Subject:. > > >I tried option 1 and 2 and it did not work. Should there be a space between > >the colon and {list password}? > > > 2) should work. A space is conventional, but not required. The password > must be the list admin password or the list moderator password. The > site password is explicitly not accepted to discourage sending it in > plain text e-mail. > > Note also, that this moderation message is a multipart/mixed message > and the part that says "If you reply to this message, keeping the > Subject: header intact ..." is it's own message/rfc822 part and it's > that message part you must reply to with the Approved: <password> > line, not the "outer" message. > > I.e. the reply must be to the <listname>-request address, not the > <listname>-owner address, and the subject must be the "confirm > long-string-of-hex-digits" subject, not the "<listname> post from > <poster> requires approval" subject. > > -- > Mark Sapiro <msapiro at value.net> The highway is for gamblers, > San Francisco Bay Area, California better use your sense - B. Dylan

2 1

Using mailman output in web page documentation
by Adrian Pepper 18 Dec '15

18 Dec '15

I found it convenient to use mechanical dumps of mailman pages in attempting to create some moderator documentation, intended primarily for local use at the university where I work. Such dumped pages do not contain any formal copyright/left statement beyond alt="GNU's NOT Unix" 1. Is there a suitable comment one could/should (should not?) add to attribute the source of such excerpts to GNU (GFDL?). I use HTML dumps rather than screenshots so that I can modify them to create a mockup of a page which refers to a particular mailing list by name, and actually links variously to the real mailman server links, or further mockups as seems appropriate (to me). In addition, form items such as radio buttons will tend to appear in the manner the particular browser will display them on the real page. Adrian Pepper P.S. That's enough to start. Further analysis and tangential questions "2. and 3." exist already, perhaps in response to followups.

3 2

Encoding problem with 2.15 to 2.18 upgrade with Finnish
by Eva Isaksson 14 Dec '15

14 Dec '15

Hi, I have a charset encoding problem that I'm unable to solve. I've been reading FAQs and list archives with little success. Our lists are in Finnish. The setup: our mailman installation uses its own translation file that is different from the Finnish translation that comes with the release. Because of that, mailman is on hold, and gets upgraded manually so that we can msfmt our own mailman.po. We have been running 2.15, on Debian, but because of the DMARC situation it's time to upgrade to 2.18.. Our upgrades have been rather routine so far, but this time we ran into problems. Suddenly, the character encoding was producing quite unreadable interfaces. Believing that the translation file was now supposed to be in utf-8 instead of iso-8859-1 I tried to re-encode all relevant files and change the mm_cfg.py values accordingly. This did not help at all. I've tried to check whether there have been any changes to mailman that could explain this, but no luck. - Eva Isaksson

2 1