![](https://secure.gravatar.com/avatar/25e6ab39c74f685a555048a24a374bc0.jpg?s=120&d=mm&r=g)
chris@gwydion.net said:
I have another domain, bar.com, which has an Apache vhost properly configured etc, and all that. Exim will handle mail for bar.com.
How to I make mailman establish the list fubar@bar.com?
For a small number of domains with unique listnames - ie listname@foo.com & listname@bar.com being the same list is not a real problem to you, you can just set the domain name in the list config and things work correctly - including by the way http://www.foo.com/mailman/ listinfo/ only listing the lists that match that domain. This is exactly what I do with the exim.org box which has a few other personalities.
Distinct listnames can be done by one install of mailman per domain (this might actually be a virtualised install where its mostly symlinked - there is a partial mention of this in the exim/mailman howto.
Real management of multiple virtual domains is something for the future... you also need to remember that there may be multiple near identical mail domains (I accept mail for www.exim.org as well as exim.org).
Nigel.
-- [ - Opinions expressed are personal and may not be shared by VData - ] [ Nigel Metheringham Nigel.Metheringham@VData.co.uk ] [ Phone: +44 1423 850000 Fax +44 1423 858866 ]
![](https://secure.gravatar.com/avatar/db1255f634fdf5613179f207e78aef70.jpg?s=120&d=mm&r=g)
This does not work 100% for me. I have multiple domains. Sending mail to list1@foo.com and list2@bar.com works but when the subscribers get the mails, the mails appear to be from list1@foo.com and list2@foo.com (should be list2@bar.com) The FROM: and REPLY TO: fields are in other words wrong.
The web-interface works perfectly. The signatures in the emails also correctly refers to list1@foo.com and list2@bar.com. In the admininterface you may explicit spesify "Reply-To:" but that doesn't work for me.
Is my MTA misconfigured ? I am using 2.0beta5, redhat and sendmail
Vidar
On Thu, 28 Sep 2000, Nigel Metheringham wrote:
![](https://secure.gravatar.com/avatar/92f5a450a976e327149e8367ffad0947.jpg?s=120&d=mm&r=g)
On Thu, Sep 28, 2000 at 01:48:33PM +0200, Vidar Langseid wrote:
For me (with 2.0b5, Debian, and exim), the "Host name this list prefers" setting on the general admin page controls the domain name used for outgoing mail.
-- "Two words: Windows survives." - Craig Mundie, Microsoft senior strategist "So does syphillis. Good thing we have penicillin." - Matthew Alton Geek Code 3.1: GCS d- s+: a- C++ UL++$ P+>+++ L+++>++++ E- W--(++) N+ o+ !K w---$ O M- V? PS+ PE Y+ PGP t 5++ X+ R++ tv b+ DI++++ D G e* h+ r++ y+
![](https://secure.gravatar.com/avatar/00ccb75314518d4bff40c18a51de8194.jpg?s=120&d=mm&r=g)
On Thu, 28 Sep 2000, Nigel Metheringham wrote:
Can you do this such that if multiple domain names (eg: foo.com and bar.com) point the same machine, that it will accept traffic on stuff to both list@foo.com and list@bar.com? I was thinking of changing a machine name and don't want to hose all my existing users...want to continue accepting mail at the old name, but hopefully have it going out from the new name. One of the posts in this thread made it sound like I can definitely control the name outgoing mail appears to come from. I just want to make sure a single list will accept stuff sent to two machine names...
Tim
--
- tim.pepper@opensales dot com * Venimus, Vidimus, *
- http://www.opensales.com * Dolavimus *
![](https://secure.gravatar.com/avatar/91e2e9c7ebcb0732bc0df6cb671dd30c.jpg?s=120&d=mm&r=g)
hello ...
yes, this is possible. Though, this needs to be setup in your:
- MTA (virtual mapping)
- httpd.conf (or whatever your sebserver uses) aliasing.
it is not difficult.
t.
On Fri, Sep 29, 2000 at 10:20:59AM -0700, Tim Pepper wrote:
-- Artificial Intelligence stands no chance against Natural Stupidity.
![](https://secure.gravatar.com/avatar/db1255f634fdf5613179f207e78aef70.jpg?s=120&d=mm&r=g)
This does not work 100% for me. I have multiple domains. Sending mail to list1@foo.com and list2@bar.com works but when the subscribers get the mails, the mails appear to be from list1@foo.com and list2@foo.com (should be list2@bar.com) The FROM: and REPLY TO: fields are in other words wrong.
The web-interface works perfectly. The signatures in the emails also correctly refers to list1@foo.com and list2@bar.com. In the admininterface you may explicit spesify "Reply-To:" but that doesn't work for me.
Is my MTA misconfigured ? I am using 2.0beta5, redhat and sendmail
Vidar
On Thu, 28 Sep 2000, Nigel Metheringham wrote:
![](https://secure.gravatar.com/avatar/92f5a450a976e327149e8367ffad0947.jpg?s=120&d=mm&r=g)
On Thu, Sep 28, 2000 at 01:48:33PM +0200, Vidar Langseid wrote:
For me (with 2.0b5, Debian, and exim), the "Host name this list prefers" setting on the general admin page controls the domain name used for outgoing mail.
-- "Two words: Windows survives." - Craig Mundie, Microsoft senior strategist "So does syphillis. Good thing we have penicillin." - Matthew Alton Geek Code 3.1: GCS d- s+: a- C++ UL++$ P+>+++ L+++>++++ E- W--(++) N+ o+ !K w---$ O M- V? PS+ PE Y+ PGP t 5++ X+ R++ tv b+ DI++++ D G e* h+ r++ y+
![](https://secure.gravatar.com/avatar/00ccb75314518d4bff40c18a51de8194.jpg?s=120&d=mm&r=g)
On Thu, 28 Sep 2000, Nigel Metheringham wrote:
Can you do this such that if multiple domain names (eg: foo.com and bar.com) point the same machine, that it will accept traffic on stuff to both list@foo.com and list@bar.com? I was thinking of changing a machine name and don't want to hose all my existing users...want to continue accepting mail at the old name, but hopefully have it going out from the new name. One of the posts in this thread made it sound like I can definitely control the name outgoing mail appears to come from. I just want to make sure a single list will accept stuff sent to two machine names...
Tim
--
- tim.pepper@opensales dot com * Venimus, Vidimus, *
- http://www.opensales.com * Dolavimus *
![](https://secure.gravatar.com/avatar/91e2e9c7ebcb0732bc0df6cb671dd30c.jpg?s=120&d=mm&r=g)
hello ...
yes, this is possible. Though, this needs to be setup in your:
- MTA (virtual mapping)
- httpd.conf (or whatever your sebserver uses) aliasing.
it is not difficult.
t.
On Fri, Sep 29, 2000 at 10:20:59AM -0700, Tim Pepper wrote:
-- Artificial Intelligence stands no chance against Natural Stupidity.
participants (5)
-
Dave Sherohman
-
Nigel Metheringham
-
tim
-
Tim Pepper
-
Vidar Langseid