-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Paulo,
Paulo Dinis wrote:
Thank's for your responde. Where can I do this ?
" Is the personalization option turned on for this list? If it is not, then you will get an error like this when you try to add personalized variables to the footer. It can be set to either Yes or Full two blocks above the footer option block on the non-digest options page."
As I said, you would set this just above where you set the list footer on the non-digest options page. The section states: "Should Mailman personalize each non-digest delivery? This is often useful for announce-only lists, but read the details section for a discussion of important performance issues."
Also, please reply to the list so that the answers will be in the archive for others to benefit from in the future.
Hope this helps,
Todd OpenPGP -> KeyID: 0xD654075A | URL: www.pobox.com/~tmz/pgp
I want to be the white man's brother, not his brother-in-law. -- Martin Luther King, Jr.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: When crypto is outlawed bayl bhgynjf jvyy unir cevinpl.
iD8DBQFAEGRouv+09NZUB1oRAj9hAKDr0c/QTXdLMSuIYMWbNd77n0z0cQCeMIy3 JUKbHn0rbmWL4eeDt/HR8h4= =Mkrh -----END PGP SIGNATURE-----
As suggested, the only 3 options available are:
1 - Can subscribers choose to receive mail immediately, rather than in batched digests? 2 - Header added to mail sent to regular list members 3 - Footer added to mail sent to regular list members
None is available to turn on/off the option to "The section states: "Should Mailman personalize each non-digest delivery? " I´m using cpanel and version 2.1.3.
Paulo Dinis
Certified Safety Tecnician Ergonomist Website : http://www.paulodinis.com/
-----Original Message----- From: Todd [mailto:Freedom_Lover@pobox.com] Sent: sexta-feira, 23 de Janeiro de 2004 0:02 To: Paulo Dinis Cc: mailman-users@python.org Subject: Re: [Mailman-Users] personalization - take 2
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi Paulo,
Paulo Dinis wrote:
Thank's for your responde. Where can I do this ?
" Is the personalization option turned on for this list? If it is not, then you will get an error like this when you try to add personalized variables to the footer. It can be set to either Yes or Full two blocks above the footer option block on the non-digest options page."
As I said, you would set this just above where you set the list footer on the non-digest options page. The section states: "Should Mailman personalize each non-digest delivery? This is often useful for announce-only lists, but read the details section for a discussion of important performance issues."
Also, please reply to the list so that the answers will be in the archive for others to benefit from in the future.
Hope this helps,
Todd OpenPGP -> KeyID: 0xD654075A | URL: www.pobox.com/~tmz/pgp
I want to be the white man's brother, not his brother-in-law. -- Martin Luther King, Jr.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: When crypto is outlawed bayl bhgynjf jvyy unir cevinpl.
iD8DBQFAEGRouv+09NZUB1oRAj9hAKDr0c/QTXdLMSuIYMWbNd77n0z0cQCeMIy3 JUKbHn0rbmWL4eeDt/HR8h4= =Mkrh -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Paulo Dinis wrote:
As suggested, the only 3 options available are:
1 - Can subscribers choose to receive mail immediately, rather than in batched digests? 2 - Header added to mail sent to regular list members 3 - Footer added to mail sent to regular list members
None is available to turn on/off the option to "The section states: "Should Mailman personalize each non-digest delivery? "
You'll have to get the admin for your server to allow list owners to enable personalization. This is done by adding:
OWNERS_CAN_ENABLE_PERSONALIZATION = 1to $prefix/Mailman/mm_cfg.py (where $prefix is the path where mailman was installed). Once that's done and the qrunners are restarted, you should have the extra option to enable personalization for your list.
I´m using cpanel and version 2.1.3.
Ugh. Have fun. Ask them to give you the source code changes for the GPL code they are distributing. It's fun. They just ignore you like the GPL means nothing. Wonderful people, those cPanel folks are.
Todd OpenPGP -> KeyID: 0xD654075A | URL: www.pobox.com/~tmz/pgp
There are no differences but differences of degree between different degrees of difference and no difference. -- William James, under nitrous oxide; 1882
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: When crypto is outlawed bayl bhgynjf jvyy unir cevinpl.
iD8DBQFAEKLOuv+09NZUB1oRAsPRAKDl/516+D9enJ/DmAs1B/YBOgmOXQCgtXa+ /L7J6RDTYE+5qS3jb7gvgJg= =CDW6 -----END PGP SIGNATURE-----
Hello to all,
As suggested on a pior post, I´ve contacted my webhost technical support and I can now customize in the non-digest pages the personalization. ( I do not have the access needed to perform the correction ). Thank´s for the help specially Tod. However I´m still having a problem with Portuguese language. The text used in several "text field " comes unreadable. Exemple : Altere a sua inscrição neste local : http://paulodinis.com/mailman/options/forum_paulodinis.com/paulo.dinis%40pau... Should come list this "Altera a sua inscrição (...)" All auto-response comes like this. How can I solve this ? Any Portuguese fellow have the same problem ?
Thank´s, Paulo Dinis Non technical user
-----Original Message----- From: Todd [mailto:Freedom_Lover@pobox.com] Sent: sexta-feira, 23 de Janeiro de 2004 4:28 To: mailman-users@python.org Subject: Re: [Mailman-Users] personalization - take 2
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Paulo Dinis wrote:
As suggested, the only 3 options available are:
1 - Can subscribers choose to receive mail immediately, rather than in batched digests? 2 - Header added to mail sent to regular list members 3 - Footer added to mail sent to regular list members
None is available to turn on/off the option to "The section states: "Should Mailman personalize each non-digest delivery? "
You'll have to get the admin for your server to allow list owners to enable personalization. This is done by adding:
OWNERS_CAN_ENABLE_PERSONALIZATION = 1to $prefix/Mailman/mm_cfg.py (where $prefix is the path where mailman was installed). Once that's done and the qrunners are restarted, you should have the extra option to enable personalization for your list.
I´m using cpanel and version 2.1.3.
Ugh. Have fun. Ask them to give you the source code changes for the GPL code they are distributing. It's fun. They just ignore you like the GPL means nothing. Wonderful people, those cPanel folks are.
Todd OpenPGP -> KeyID: 0xD654075A | URL: www.pobox.com/~tmz/pgp
There are no differences but differences of degree between different degrees of difference and no difference. -- William James, under nitrous oxide; 1882
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: When crypto is outlawed bayl bhgynjf jvyy unir cevinpl.
iD8DBQFAEKLOuv+09NZUB1oRAsPRAKDl/516+D9enJ/DmAs1B/YBOgmOXQCgtXa+ /L7J6RDTYE+5qS3jb7gvgJg= =CDW6 -----END PGP SIGNATURE-----
participants (2)
-
Paulo Dinis -
Todd