NumPy-Discussion January 2012

numpy-discussion@python.org

99 participants
89 discussions

Re: [Numpy-discussion] example reading binary Fortran file

by Neil Martinsen-Burrell

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

4 months, 1 week

C-API: multidimensional array indexing?

by Johann Bauer

Dear experts, is there a C-API function for numpy which implements Python's multidimensional indexing? Say, I have a 2d-array PyArrayObject * M; and an index int i; how do I extract the i-th row or column M[i,:] respectively M[:,i]? I am looking for a function which gives again a PyArrayObject * and which is a view to M (no copied data; the result should be another PyArrayObject whose data and strides points to the correct memory portion of M). I searched the API documentation, Google and mailing lists for quite a long time but didn't find anything. Can you help me? Thanks, Johann

5 years, 8 months

SVD errors

by mtrumpis＠berkeley.edu

Hello list.. I've run into two SVD errors over the last few days. Both errors are identical in numpy/scipy. I've submitted a ticket for the 1st problem (numpy ticket #990). Summary is: some builds of the lapack_lite module linking against system LAPACK (not the bundled dlapack_lite.o, etc) give a "LinAlgError: SVD did not converge" exception on my matrix. This error does occur using Mac's Accelerate framework LAPACK, and a coworker's Ubuntu LAPACK version. It does not seem to happen using ATLAS LAPACK (nor using Octave/Matlab on said Ubuntu) Just today I've come across a negative singular value cropping up in an SVD of a different matrix. This error does occur on my ATLAS LAPACK based numpy, as well as on the Ubuntu setup. And once again, it does not happen in Octave/Matlab. I'm using numpy 1.3.0.dev6336 -- don't know what the Ubuntu box is running. Here are some npy files for the two different cases: https://cirl.berkeley.edu/twiki/pub/User/MikeTrumpis/noconverge_operator.npy https://cirl.berkeley.edu/twiki/pub/User/MikeTrumpis/negsval_operator.npy Mike

8 years, 5 months

example reading binary Fortran file

by David Froger

Hy, My question is about reading Fortran binary file (oh no this question again...) Until now, I was using the unpack module like that : def lread(f,fourBeginning,fourEnd,*tuple): from struct import unpack """Reading a Fortran binary file in litte-endian""" if fourBeginning: f.seek(4,1) for array in tuple: for elt in xrange(array.size): transpose(array).flat[elt] = unpack(array.dtype.char,f.read(array.itemsize))[0] if fourEnd: f.seek(4,1) After googling, I read that fopen and npfille was deprecated, and we should use numpy.fromfile and ndarray.tofile, but despite of the documentaion, the cookbook, the mailling list and google, I don't succed in making a simple example. Considering the simple Fortran code below what is the Python script to read the four arrrays? What about if my pc is little endian and the file big endian? I think it will be a good idea to put the Fortran writting-arrays code and the Python reading-array script in the cookbook and maybe a page to help people comming from Fortran to start with Python ? Best, David Froger program makeArray implicit none integer,parameter:: nx=10,ny=20 real(4),dimension(nx,ny):: ux,uy,p integer :: i,j open(11,file='uxuyp.bin',form='unformatted') do i = 1,nx do j = 1,ny ux(i,j) = real(i*j) uy(i,j) = real(i)/real(j) p (i,j) = real(i) + real(j) enddo enddo write(11) ux,uy write(11) p close(11) end program makeArray

8 years, 9 months

dtype '|S0' not understood

by David Warde-Farley

Howdy, It seems it's possible using e.g. In [25]: dtype([('foo', str)])Out[25]: dtype([('foo', '|S0')]) to get yourself a zero-length string. However dtype('|S0') results in a TypeError: data type not understood. I understand the stupidity of creating a 0-length string field but it's conceivable that it's accidental. For example, it could lead to a situation where you've created that field, are missing all the data you had meant to put in it, serialize with np.save, and upon np.load aren't able to get _any_ of your data back because the dtype descriptor is considered bogus (can you guess why I thought of this scenario?). It seems that either dtype(str) should do something more sensible than zero-length string, or it should be possible to create it with dtype('| S0'). Which should it be? David

9 years, 1 month

Long-standing issue with using numpy in embedded CPython

by Yang Zhang

It turns out that there's a long-standing problem in numpy that prevents it from being used in embedded CPython environments: http://stackoverflow.com/questions/7592565/when-embedding-cpython-in-java-w… http://mail.scipy.org/pipermail/numpy-discussion/2009-July/044046.html Is there any fix or workaround for this? Thanks. -- Yang Zhang http://yz.mit.edu/

9 years, 2 months

"Symbol table not found" compiling numpy from git repository on Windows

by John Salvatier

Hello, I'm trying to compile numpy on Windows 7 using the command: "python setup.py config --compiler=mingw32 build" but I get an error about a symbol table not found. Anyone know how to work around this or what to look into? building library "npymath" sources Building msvcr library: "C:\Python26\libs\libmsvcr90.a" (from C:\Windows\winsxs\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_750b37ff97f4f68b\msvcr90.dll) objdump.exe: C:\Windows\winsxs\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_750b37ff97f4f68b\msvcr90.dll: File format not recognized Traceback (most recent call last): File "setup.py", line 214, in <module> setup_package() File "setup.py", line 207, in setup_package configuration=configuration ) File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\core.py", line 186, in setup return old_setup(**new_attr) File "C:\Python26\lib\distutils\core.py", line 152, in setup dist.run_commands() File "C:\Python26\lib\distutils\dist.py", line 975, in run_commands self.run_command(cmd) File "C:\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\command\build.py", line 37, in run old_build.run(self) File "C:\Python26\lib\distutils\command\build.py", line 134, in run self.run_command(cmd_name) File "C:\Python26\lib\distutils\cmd.py", line 333, in run_command self.distribution.run_command(command) File "C:\Python26\lib\distutils\dist.py", line 995, in run_command cmd_obj.run() File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\command\build_src.py", line 152, in run self.build_sources() File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\command\build_src.py", line 163, in build_sources self.build_library_sources(*libname_info) File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\command\build_src.py", line 298, in build_library_sources sources = self.generate_sources(sources, (lib_name, build_info)) File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\command\build_src.py", line 385, in generate_sources source = func(extension, build_dir) File "numpy\core\setup.py", line 646, in get_mathlib_info st = config_cmd.try_link('int main(void) { return 0;}') File "C:\Python26\lib\distutils\command\config.py", line 257, in try_link self._check_compiler() File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\command\config.py", line 45, in _check_compiler old_config._check_compiler(self) File "C:\Python26\lib\distutils\command\config.py", line 107, in _check_compiler dry_run=self.dry_run, force=1) File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\ccompiler.py", line 560, in new_compiler compiler = klass(None, dry_run, force) File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\mingw32ccompiler.py", line 94, in __init__ msvcr_success = build_msvcr_library() File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\mingw32ccompiler.py", line 362, in build_msvcr_library generate_def(dll_file, def_file) File "C:\Users\jsalvatier\workspace\numpy\numpy\distutils\mingw32ccompiler.py", line 282, in generate_def raise ValueError("Symbol table not found") ValueError: Symbol table not found Thank you, John

9 years, 4 months

dtype comparison, hash

by Andreas Kloeckner

Hi all, Two questions: - Are dtypes supposed to be comparable (i.e. implement '==', '!=')? - Are dtypes supposed to be hashable? PyCUDA and PyOpenCL assume both in a few places, but at least hashability doesn't seem to be true. (If so, __hash__ should be implemented to throw an error. If not, we found a bug in the hash implementation.) Thanks! Andreas

9 years, 8 months

Moving to gcc 4.* for win32 installers ?

by David Cournapeau

Hi, I was wondering if we could finally move to a more recent version of compilers for official win32 installers. This would of course concern the next release cycle, not the ones where beta/rc are already in progress. Basically, the pros: - we will have to move at some point - gcc 4.* seem less buggy, especially C++ and fortran. - no need to maintain msvcr90 vodoo The cons: - it will most likely break the ABI - we need to recompile atlas (but I can take care of it) - the biggest: it is difficult to combine gfortran with visual studio (more exactly you cannot link gfortran runtime to a visual studio executable). The only solution I could think of would be to recompile the gfortran runtime with Visual Studio, which for some reason does not sound very appealing :) Thoughts ? cheers, David

9 years, 9 months

Numpy 1.5.1/1.6.1 doesn't build doc with sphinx 1.1.2

by Sandro Tosi

Hello, with the new sphinx, v1.1.2, numpy documentation of 1.5.1 or 1.6.1 doesn't build. The full log of the debian package build is at: http://people.debian.org/~jwilk/tmp/python-numpy_1.6.1-3_i386.build attached is the file left in /tmp by sphinx for the error. Could you please give it a look? Cheers, -- Sandro Tosi (aka morph, morpheus, matrixhasu) My website: http://matrixhasu.altervista.org/ Me at Debian: http://wiki.debian.org/SandroTosi

9 years, 9 months

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

NumPy-Discussion January 2012