Mailman 3 November 2014 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker 11 Jul '23

11 Jul '23

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem 18 Feb '23

18 Feb '23

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How do I avoid these messages to appear? I know that I could in principle use numpy.seterr. However, I do NOT want to remove these warnings for other potential divide/multiply/sqrt etc errors. Only when I am using a "where", to in fact avoid such warnings! Note that the warnings only happen once, but since I am going to release that code, I would like to avoid the user to get such messages which are irrelevant here (because I am testing, with the where, when NOT to divide by zero or take a sqrt of a negative number). thanks! Eric

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell 22 Jul '21

22 Jul '21

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

C-API: multidimensional array indexing?
by Johann Bauer 31 Mar '16

31 Mar '16

Dear experts, is there a C-API function for numpy which implements Python's multidimensional indexing? Say, I have a 2d-array PyArrayObject * M; and an index int i; how do I extract the i-th row or column M[i,:] respectively M[:,i]? I am looking for a function which gives again a PyArrayObject * and which is a view to M (no copied data; the result should be another PyArrayObject whose data and strides points to the correct memory portion of M). I searched the API documentation, Google and mailing lists for quite a long time but didn't find anything. Can you help me? Thanks, Johann

3 3

Generalize hstack/vstack --> stack; Block matrices like in matlab
by Stefan Otte 09 Jan '16

09 Jan '16

Hey, quite often I work with block matrices. Matlab offers the convenient notation [ a b; c d ] to stack matrices. The numpy equivalent is kinda clumsy: vstack([hstack([a,b]), hstack([c,d])]) I wrote the little function `stack` that does exactly that: stack([[a, b], [c, d]]) In my case `stack` replaced `hstack` and `vstack` almost completely. If you're interested in including it in numpy I created a pull request [1]. I'm looking forward to getting some feedback! Best, Stefan [1] https://github.com/numpy/numpy/pull/5057

12 24

PR added: frozen dimensions in gufunc signatures
by Jaime Fernández del Río 23 Jun '15

23 Jun '15

Hi, I have just sent a PR (https://github.com/numpy/numpy/pull/5015), adding the possibility of having frozen dimensions in gufunc signatures. As a proof of concept, I have added a `cross1d` gufunc to `numpy.core.umath_tests`: In [1]: import numpy as np In [2]: from numpy.core.umath_tests import cross1d In [3]: cross1d.signature Out[3]: '(3),(3)->(3)' In [4]: a = np.random.rand(1000, 3) In [5]: b = np.random.rand(1000, 3) In [6]: np.allclose(np.cross(a, b), cross1d(a, b)) Out[6]: True In [7]: %timeit np.cross(a, b) 10000 loops, best of 3: 76.1 us per loop In [8]: %timeit cross1d(a, b) 100000 loops, best of 3: 13.1 us per loop In [9]: c = np.random.rand(1000, 2) In [10]: d = np.random.rand(1000, 2) In [11]: cross1d(c, d) --------------------------------------------------------------------------- ValueError Traceback (most recent call last) <ipython-input-11-72c66212e40c> in <module>() ----> 1 cross1d(c, d) ValueError: cross1d: Operand 0 has a mismatch in its core dimension 0, with gufunc signature (3),(3)->(3) (size 2 is different from 3) The speed up over `np.cross` is nice, and while `np.cross` is not the best of examples, as it needs to handle more sizes, in many cases this will allow producing gufuncs that work without a Python wrapper redoing checks that are best left to the iterator, such as dimension sizes. It still needs tests, but before embarking on fully developing those, I wanted to make sure that there is an interest on this. I would also like to further enhance gufuncs providing computed dimensions, e.g. making it possible to e.g. define `pairwise_cross` with signature '(n, 3)->($m, 3)', where the $ indicates that m is a computed dimension, that would have to be calculated by a function passed to the gufunc constructor and stored in the gufunc object, based on the other core dimensions. In this case it would make $m be n*(n-1), so that all pairwise cross products between 3D vectors could be computed. The syntax with '$' is kind of crappy, so any suggestions on how to better express this in the signature are more than welcome, as well as any feedback on the merits (or lack of them) of implementing this. Jaime -- (\__/) ( O.o) ( > <) Este es Conejo. Copia a Conejo en tu firma y ayúdale en sus planes de dominación mundial.

4 4

Problem with _dotblas.pyd when using Matplotlib for 3d plot
by Geoffrey Mégardon 19 Mar '15

19 Mar '15

Hi, I am on Windows 8.1, 64-bit, using the usual version of Anaconda-64-bit for windows. I just come from the mailing list of matplotlib: my PC is not able to do 3D plot with matplotlib. Python crashes completely if I try to plot something in 3D and to show it: "Python.exe has stopped working..." The main problem in resolving my issue is that the python traceback and the faulthandler package do not succeed in catching the errors. Only the Windows crash report allows us to see what happened before the crash. The windows report tells that the file _dotblas.pyd from numpy is likely responsible for the crash. So I tried a simple: import numpy; numpy.test() numpy.test() does not work! I dont get any traceback from python. It just crashes as before: "Python.exe has stopped working..." And again, the Windows report blames _dotblas.pyd :) Here the new Windows report for the numpy.test(), I highlighted the lines which blame _dotblas.pyd: Version=1 EventType=APPCRASH EventTime=130608138227608275 ReportType=2 Consent=1 UploadTime=130608138229728384 ReportIdentifier=216b16d2-6f5c-11e4-bec3-48d22435da2b IntegratorReportIdentifier=216b16d1-6f5c-11e4-bec3-48d22435da2b NsAppName=python.exe Response.BucketId=398b7eee350a0fd8a7a96f705d3488f6 Response.BucketTable=4 Response.LegacyBucketId=85979911964 Response.type=4 Sig[0].Name=Application Name Sig[0].Value=python.exe Sig[1].Name=Application Version Sig[1].Value=0.0.0.0 Sig[2].Name=Application Timestamp Sig[2].Value=53b4679e *Sig[3].Name=Fault Module NameSig[3].Value=_dotblas.pyd* Sig[4].Name=Fault Module Version Sig[4].Value=0.0.0.0 Sig[5].Name=Fault Module Timestamp Sig[5].Value=545678cb Sig[6].Name=Exception Code Sig[6].Value=c000001d Sig[7].Name=Exception Offset Sig[7].Value=0000000000324022 DynamicSig[1].Name=OS Version DynamicSig[1].Value=6.3.9600.2.0.0.768.101 DynamicSig[2].Name=Locale ID DynamicSig[2].Value=2057 DynamicSig[22].Name=Additional Information 1 DynamicSig[22].Value=f32f DynamicSig[23].Name=Additional Information 2 DynamicSig[23].Value=f32feb95f950f918532aa47b4372840e DynamicSig[24].Name=Additional Information 3 DynamicSig[24].Value=9882 DynamicSig[25].Name=Additional Information 4 DynamicSig[25].Value=98823b6c7f579b24e92112ab827fe4a1 UI[2]=C:\Anaconda\python.exe UI[3]=python.exe has stopped working UI[4]=Windows can check online for a solution to the problem. UI[5]=Check online for a solution and close the program UI[6]=Check online for a solution later and close the program UI[7]=Close the program LoadedModule[0]=C:\Anaconda\python.exe LoadedModule[1]=C:\WINDOWS\SYSTEM32\ntdll.dll LoadedModule[2]=C:\WINDOWS\system32\KERNEL32.DLL LoadedModule[3]=C:\WINDOWS\system32\KERNELBASE.dll LoadedModule[4]=C:\Anaconda\python27.dll LoadedModule[5]=C:\WINDOWS\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.8387_none_08e793bfa83a89b5\MSVCR90.dll LoadedModule[6]=C:\WINDOWS\system32\USER32.dll LoadedModule[7]=C:\WINDOWS\system32\ADVAPI32.dll LoadedModule[8]=C:\WINDOWS\system32\SHELL32.dll LoadedModule[9]=C:\WINDOWS\system32\GDI32.dll LoadedModule[10]=C:\WINDOWS\system32\msvcrt.dll LoadedModule[11]=C:\WINDOWS\SYSTEM32\sechost.dll LoadedModule[12]=C:\WINDOWS\system32\RPCRT4.dll LoadedModule[13]=C:\WINDOWS\SYSTEM32\combase.dll LoadedModule[14]=C:\WINDOWS\system32\SHLWAPI.dll LoadedModule[15]=C:\WINDOWS\system32\IMM32.DLL LoadedModule[16]=C:\WINDOWS\system32\MSCTF.dll LoadedModule[17]=C:\Anaconda\DLLs\_socket.pyd LoadedModule[18]=C:\WINDOWS\system32\WS2_32.dll LoadedModule[19]=C:\WINDOWS\system32\NSI.dll LoadedModule[20]=C:\Anaconda\DLLs\_ssl.pyd LoadedModule[21]=C:\Anaconda\DLLs\_ctypes.pyd LoadedModule[22]=C:\WINDOWS\system32\ole32.dll LoadedModule[23]=C:\WINDOWS\system32\OLEAUT32.dll LoadedModule[24]=C:\Anaconda\DLLs\_hashlib.pyd LoadedModule[25]=C:\WINDOWS\SYSTEM32\CRYPTSP.dll LoadedModule[26]=C:\WINDOWS\system32\rsaenh.dll LoadedModule[27]=C:\WINDOWS\SYSTEM32\bcrypt.dll LoadedModule[28]=C:\WINDOWS\SYSTEM32\CRYPTBASE.dll LoadedModule[29]=C:\WINDOWS\SYSTEM32\bcryptPrimitives.dll LoadedModule[30]=C:\Users\User\AppData\Roaming\Python-Eggs\faulthandler-2.4-py2.7-win-amd64.egg-tmp\faulthandler.pyd LoadedModule[31]=C:\Anaconda\lib\site-packages\numpy\core\multiarray.pyd LoadedModule[32]=C:\Anaconda\lib\site-packages\numpy\core\umath.pyd LoadedModule[33]=C:\Anaconda\lib\site-packages\numpy\core\_dotblas.pyd LoadedModule[34]=C:\Anaconda\lib\site-packages\numpy\core\libiomp5md.dll LoadedModule[35]=C:\Anaconda\lib\site-packages\numpy\core\scalarmath.pyd LoadedModule[36]=C:\Anaconda\lib\site-packages\numpy\lib\_compiled_base.pyd LoadedModule[37]=C:\Anaconda\lib\site-packages\numpy\linalg\lapack_lite.pyd LoadedModule[38]=C:\Anaconda\lib\site-packages\numpy\linalg\_umath_linalg.pyd LoadedModule[39]=C:\Anaconda\lib\site-packages\numpy\fft\fftpack_lite.pyd LoadedModule[40]=C:\Anaconda\lib\site-packages\numpy\random\mtrand.pyd LoadedModule[41]=C:\Anaconda\DLLs\_multiprocessing.pyd State[0].Key=Transport.DoneStage1 State[0].Value=1 FriendlyEventName=Stopped working ConsentKey=APPCRASH AppName=python.exe AppPath=C:\Anaconda\python.exe NsPartner=windows NsGroup=windows8 ApplicationIdentity=5B036AF1EC2E20F320DBF28D119DE93D Any idea, of what I can do? I try to reinstall anaconda, I also try conda remove numpy and conda install numpy. That does not seem to change anything. -- -- MEGARDON Geoffrey

5 4

Numpy 'None' comparison FutureWarning
by Demitri Muna 31 Jan '15

31 Jan '15

Hi, I just encountered the following in my code: FutureWarning: comparison to `None` will result in an elementwise object comparison in the future. I'm very concerned about this. This is a very common programming pattern (lazy loading): class A(object): def __init__(self): self._some_array = None @property def some_array(self): if self._some_array == None: # perform some expensive setup of array return self._some_array It seems to me that the new behavior will break this pattern. I think that redefining the "==" operator is a little too aggressive here. It strikes me as very nonstandard and not at all obvious to someone reading the code that the comparison is a very special case for numpy objects. Unless there's some aspect I'm missing here, I think an element-wise comparator should be more explicit. Cheers, Demitri _________________________________________ Demitri Muna Department of Astronomy Le Ohio State University http://trillianverse.org http://scicoder.org

5 6

New function `count_unique` to generate contingency tables.
by Warren Weckesser 25 Jan '15

25 Jan '15

I created a pull request (https://github.com/numpy/numpy/pull/4958) that defines the function `count_unique`. `count_unique` generates a contingency table from a collection of sequences. For example, In [7]: x = [1, 1, 1, 1, 2, 2, 2, 2, 2] In [8]: y = [3, 4, 3, 3, 3, 4, 5, 5, 5] In [9]: (xvals, yvals), counts = count_unique(x, y) In [10]: xvals Out[10]: array([1, 2]) In [11]: yvals Out[11]: array([3, 4, 5]) In [12]: counts Out[12]: array([[3, 1, 0], [1, 1, 3]]) It can be interpreted as a multi-argument generalization of `np.unique(x, return_counts=True)`. It overlaps with Pandas' `crosstab`, but I think this is a pretty fundamental counting operation that fits in numpy. Matlab's `crosstab` (http://www.mathworks.com/help/stats/crosstab.html) and R's `table` perform the same calculation (with a few more bells and whistles). For comparison, here's Pandas' `crosstab` (same `x` and `y` as above): In [28]: import pandas as pd In [29]: xs = pd.Series(x) In [30]: ys = pd.Series(y) In [31]: pd.crosstab(xs, ys) Out[31]: col_0 3 4 5 row_0 1 3 1 0 2 1 1 3 And here is R's `table`: > x <- c(1,1,1,1,2,2,2,2,2) > y <- c(3,4,3,3,3,4,5,5,5) > table(x, y) y x 3 4 5 1 3 1 0 2 1 1 3 Is there any interest in adding this (or some variation of it) to numpy? Warren

5 11

Re: [Numpy-discussion] Fwd: numpy.i and std::complex
by Glen Mabey 14 Dec '14

14 Dec '14

Hello, Ok, here's my attempt -- https://github.com/gmabey/numpy/compare/swig-std-complex Glen On Oct 27, 2014, at 11:13 AM, Bill Spotz <wfspotz(a)sandia.gov> wrote: > Supporting std::complex<> was just low enough priority for me that I decided to wait until someone expressed interest ... and now, many years later, someone finally has. > > I would be happy to include this into numpy.i, but I would like to see some tests in the numpy repository demonstrating that it works. These could be relatively short and simple, and since float and double are the only scalar data types that I could foresee supporting, there would not be a need for testing the large numbers of data types that the other tests cover. > > I would also want to protect the references to C++ objects with '#ifdef __cplusplus', but that is easy enough. > > -Bill > > On Oct 27, 2014, at 9:06 AM, Glen Mabey <gmabey(a)swri.org> wrote: > >> Hello, >> >> I was very excited to learn about numpy.i for easy numpy+swigification of C code -- it's really handy. >> >> Knowing that swig wraps C code, I wasn't too surprised that there was the issue with complex data types (as described at http://docs.scipy.org/doc/numpy/reference/swig.interface-file.html#other-co…), but still it was pretty disappointing because most of my data is complex, and I'm invoking methods written to use C++'s std::complex class. >> >> After quite a bit of puzzling and not much help from previous mailing list posts, I created this very brief but very useful file, which I call numpy_std_complex.i -- >> >> /* -*- C -*- (not really, but good for syntax highlighting) */ >> #ifdef SWIGPYTHON >> >> %include "numpy.i" >> >> %include <std_complex.i> >> >> %numpy_typemaps(std::complex<float>, NPY_CFLOAT , int) >> %numpy_typemaps(std::complex<double>, NPY_CDOUBLE, int) >> >> #endif /* SWIGPYTHON */ >> >> >> I'd really like for this to be included alongside numpy.i -- but maybe I overestimate the number of numpy users who use complex data (let your voice be heard!) and who also end up using std::complex in C++ land. >> >> Or if anyone wants to improve upon this usage I would be very happy to hear about what I'm missing. >> >> I'm sure there's a documented way to submit this file to the git repo, but let me simultaneously ask whether list subscribers think this is worthwhile and ask someone to add+push it for me … >> >> Thanks, >> Glen Mabey >> _______________________________________________ >> NumPy-Discussion mailing list >> NumPy-Discussion(a)scipy.org >> http://mail.scipy.org/mailman/listinfo/numpy-discussion > > ** Bill Spotz ** > ** Sandia National Laboratories Voice: (505)845-0170 ** > ** P.O. Box 5800 Fax: (505)284-0154 ** > ** Albuquerque, NM 87185-0370 Email: wfspotz(a)sandia.gov ** > > _______________________________________________ > NumPy-Discussion mailing list > NumPy-Discussion(a)scipy.org > http://mail.scipy.org/mailman/listinfo/numpy-discussion

2 2