Mailman 3 February 2014 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker 11 Jul '23

11 Jul '23

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem 18 Feb '23

18 Feb '23

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How do I avoid these messages to appear? I know that I could in principle use numpy.seterr. However, I do NOT want to remove these warnings for other potential divide/multiply/sqrt etc errors. Only when I am using a "where", to in fact avoid such warnings! Note that the warnings only happen once, but since I am going to release that code, I would like to avoid the user to get such messages which are irrelevant here (because I am testing, with the where, when NOT to divide by zero or take a sqrt of a negative number). thanks! Eric

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell 22 Jul '21

22 Jul '21

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

C-API: multidimensional array indexing?
by Johann Bauer 31 Mar '16

31 Mar '16

Dear experts, is there a C-API function for numpy which implements Python's multidimensional indexing? Say, I have a 2d-array PyArrayObject * M; and an index int i; how do I extract the i-th row or column M[i,:] respectively M[:,i]? I am looking for a function which gives again a PyArrayObject * and which is a view to M (no copied data; the result should be another PyArrayObject whose data and strides points to the correct memory portion of M). I searched the API documentation, Google and mailing lists for quite a long time but didn't find anything. Can you help me? Thanks, Johann

3 3

taking a 2D uneven surface slice
by Bryan Woods 04 Dec '14

04 Dec '14

I'm trying to do something that at first glance I think should be simple but I can't quite figure out how to do it. The problem is as follows: I have a 3D grid Values[Nx, Ny, Nz] I want to slice Values at a 2D surface in the Z dimension specified by Z_index[Nx, Ny] and return a 2D slice[Nx, Ny]. It is not as simple as Values[:,:,Z_index]. I tried this: >>> values.shape (4, 5, 6) >>> coords.shape (4, 5) >>> slice = values[:,:,coords] >>> slice.shape (4, 5, 4, 5) >>> slice = np.take(values, coords, axis=2) >>> slice.shape (4, 5, 4, 5) >>> Obviously I could create an empty 2D slice and then fill it by using np.ndenumerate to fill it point by point by selecting values[i, j, Z_index[i, j]]. This just seems too inefficient and not very pythonic.

3 3

building 32 bit numpy on 64 bit linux
by David Jones 19 May '14

19 May '14

I'm trying to compile 32-bit numpy on a 64 bit Centos 6 system, but fails with the message: "Broken toolchain: cannot link a simple C program" It get's the compile flags right, but not the linker: C compiler: gcc -pthread -fno-strict-aliasing -g -O2 -m32 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC compile options: '-Inumpy/core/src/private -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -Inumpy/core/include -I/opt/python/ia32/include/python2.7 -c' gcc: _configtest.c gcc -pthread _configtest.o -o _configtest _configtest.o: could not read symbols: File in wrong format collect2: ld returned 1 exit status I'm bulding it using a 32bit python build that I compiled on the same system. I tried: OPT="-m32" FOPT="-m32" python setup.py build and setarch x86_64 -B python setup.py build But with the same results. Someone worked around this by altering ccompiler.py, but I'm trying to find a cleaner solution. See:http://stackoverflow.com/questions/11265057/how-do-i-install-a-32-bit-v… Is there a standard way of doing this? Regards, David J.

3 13

Default builds of OpenBLAS development branch are now fork safe
by Nathaniel Smith 07 Apr '14

07 Apr '14

Hey all, Just a heads up: thanks to the tireless work of Olivier Grisel, the OpenBLAS development branch is now fork-safe when built with its default threading support. (It is still not thread-safe when built using OMP for threading and gcc, but this is not the default.) Gory details: https://github.com/xianyi/OpenBLAS/issues/294 Check it out - if it works you might want to consider lobbying your favorite distro to backport it. -n

10 61

1.8.1 release
by Charles R Harris 06 Mar '14

06 Mar '14

Hi All, A lot of fixes have gone into the 1.8.x branch and it looks about time to do a bugfix release. There are a couple of important bugfixes still to backport, but if all goes well next weekend, March 1, looks like a good target date. So give the current 1.8.x branch a try so as to check that it covers your most urgent bugfix needs. Chuck

9 18

ndarray is not a sequence
by Anthony Scopatz 04 Mar '14

04 Mar '14

Hello All, The semantics of this seem quite insane to me: In [1]: import numpy as np In [2]: import collections In [4]: isinstance(np.arange(5), collections.Sequence) Out[4]: False In [6]: np.version.full_version Out[6]: '1.9.0.dev-eb40f65' Is there any possibility that ndarray could inherit (in the last place) from collections.Sequence? It seems like this would only be a 1 - 5 line fix somewhere. I just spent a few hours tracking down a bug related to this. Thanks for considering! Be Well Anthony

7 10

proper way to test Numpy version in C/C++
by Ghislain Vaillant 03 Mar '14

03 Mar '14

Hi everyone, I have got code for some python wrappers of a scientific library which needs to support both Numpy 1.6 and later versions. The build of the wrapper (using swig) stopped working because of the deprecated API introduced in v1.7. The error only concerns the renaming of some macros from NPY_XXX to NPY_ARRAY_XXX. I was thinking to just check for the Numpy version at build time and add corresponding #define to provide the necessary renaming in case the build is done with Numpy v1.6. How can I robustly test for Numpy's version API in C ? Ghis

1 1