Mailman 3 June 2016 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker July 11, 2023

July 11, 2023

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem Feb. 18, 2023

Feb. 18, 2023

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How … [View More]

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell July 22, 2021

July 22, 2021

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program … [View More]makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil [View Less]

10 10

Design feedback solicitation
by Pavlyk, Oleksandr July 14, 2016

July 14, 2016

Hi, I am new to this list, so I will start with an introduction. My name is Oleksandr Pavlyk. I now work at Intel Corp. on the Intel Distribution for Python, and previously worked at Wolfram Research for 12 years. My latest project was to write a mirror to numpy.random, named numpy.random_intel. The module uses MKL to sample from different distributions for efficiency. It provides support for different underlying algorithms for basic pseudo-random number generation, i.e. in addition to MT19937,… [View More]

3 4

Accelerate or OpenBLAS for numpy / scipy wheels?
by Matthew Brett July 1, 2016

July 1, 2016

Hi, I just succeeded in getting an automated dual arch build of numpy and scipy, using OpenBLAS. See the last three build jobs in these two build matrices: https://travis-ci.org/matthew-brett/numpy-wheels/builds/140388119 https://travis-ci.org/matthew-brett/scipy-wheels/builds/140684673 Tests are passing on 32 and 64-bit. I didn't upload these to the usual Rackspace container at wheels.scipy.org to avoid confusion. So, I guess the question now is - should we switch to shipping OpenBLAS … [View More]

7 13

Benchmark regression feeds
by Pauli Virtanen June 29, 2016

June 29, 2016

Hi, In case someone is interested in getting notifications of performance regressions in the Numpy and Scipy benchmarks, this is available as Atom feeds at: https://pv.github.io/numpy-bench/regressions.xml https://pv.github.io/scipy-bench/regressions.xml -- Pauli Virtanen

2 1

Is numpy.test() supposed to be multithreaded?
by Michael Ward June 29, 2016

June 29, 2016

Heya, I'm not a numbers guy, but I maintain servers for scientists and researchers who are. Someone pointed out that our numpy installation on a particular server was only using one core. I'm unaware of the who/how the previous version of numpy/OpenBLAS were installed, so I installed them from scratch, and confirmed that the users test code now runs on multiple cores as expected, drastically increasing performance time. Now the user is writing back to say, "my test code is fast now, but … [View More]

5 5

ANN: Bokeh 0.12 Released
by Bryan Van de Ven June 28, 2016

June 28, 2016

Hi all, On behalf of the Bokeh team, I am pleased to announce the release of version 0.12.0 of Bokeh! This release was a major update, and was focused on areas of layout and styling, new JavaScript APIs for BokehJS, and improvements to the Bokeh Server. But there were many additional improvements in other areas as well. Rather than try to describe all the changes here, I encourage every one to check out the new project blog: https://bokeh.github.io/blog/2016/6/28/release-0-12/ which has … [View More]

1 0

Pip download stats for numpy
by Matthew Brett June 26, 2016

June 26, 2016

Hi, I just ran a query on pypi downloads [1] using the BigQuery interface to pypi stats [2]. It lists the numpy files downloaded from pypi via a pip install, over the last two weeks, ordered by the number of downloads: 1 100595 numpy-1.11.0.tar.gz 2 97754 numpy-1.11.0-cp27-cp27mu-manylinux1_x86_64.whl 3 38471 numpy-1.8.1-cp27-cp27mu-manylinux1_x86_64.whl 4 20874 numpy-1.11.0-cp27-none-win_amd64.whl 5 20049 numpy-1.11.0-cp27-cp27m-macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.… [View More]

2 1

Numpy 1.11.1 release
by Charles R Harris June 26, 2016

June 26, 2016

Hi All, I'm pleased to announce the release of Numpy 1.11.1. This release supports Python 2.6 - 2.7, and 3.2 - 3.5 and fixes bugs and regressions found in Numpy 1.11.0 as well as making several build related improvements. Wheels for Linux, Windows, and OSX can be found on PyPI. Sources are available on both PyPI and Sourceforge <https://sourceforge.net/projects/numpy/files/NumPy/1.11.1/>. Thanks to all who were involved in this release, and a special thanks to Matthew Brett for his … [View More]

1 0