Mailman 3 November 2017 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker July 11, 2023

July 11, 2023

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem Feb. 18, 2023

Feb. 18, 2023

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How … [View More]

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell July 22, 2021

July 22, 2021

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program … [View More]makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil [View Less]

10 10

Type annotations for NumPy
by Stephan Hoyer Dec. 5, 2017

Dec. 5, 2017

There's been growing interest in supporting PEP-484 style type annotations in NumPy: https://github.com/numpy/numpy/issues/7370 This would allow NumPy users to add type-annotations to their code that uses NumPy, which they could check with mypy, pycharm or pytype. For example: def f(x: np.ndarray) -> np.ndarray: """Identity function on a NumPy array.""" return x Eventually, we could include data types and potentially array shapes as part of the type. This gets quite a bit more … [View More]

11 20

Deprecate matrices in 1.15 and remove in 1.17?
by Marten van Kerkwijk Dec. 3, 2017

Dec. 3, 2017

Hi All, I wondered if the move to python3-only starting with numpy 1.17 would be a good reason to act on what we all seem to agree: that the matrix class was a bad idea, with its overriding of multiplication and lack of support for stacks of matrices. For 1.17, minimum python supposedly is >=3.5, so we will be guaranteed to have the matrix multiply operator @ available, and hence there is arguably even less of a case for keeping the matrix class; removing it would allow taking out quite a … [View More]

15 25

Re: [Numpy-discussion] Is there a way that indexing a matrix of data with a matrix of indices?
by Eric Hermes Nov. 30, 2017

Nov. 30, 2017

On Wed, 2017-11-29 at 12:00 -0500, numpy-discussion-request(a)python.org wrote: > Date: Wed, 29 Nov 2017 14:56:28 +0000 (UTC) > From: "ZHUO QL (KDr2)" <zhuoql(a)yahoo.com> > To: Discussion of Numerical Python <numpy-discussion(a)python.org> > Subject: [Numpy-discussion] Is there a way that indexing a matrix of > data with a matrix of indices? > Message-ID: <360382279.3966234.1511967388050(a)mail.yahoo.com> > Content-Type: text/plain; charset="utf-8" > … [View More]

2 1

Is there a way that indexing a matrix of data with a matrix of indices?
by ZHUO QL (KDr2) Nov. 29, 2017

Nov. 29, 2017

Hi, all suppose: - D, is the data matrix, its shape is M x N- I, is the indices matrix, its shape is M x K, K<=N Is there a efficient way to get a Matrix R with the same shape of I so that R[x,y] = D[x, I[x,y]] ? A nested for-loop or list-comprehension is too slow for me. Thanks. ---- ZHUO QL (KDr2) http://kdr2.com

2 1

Re: [Numpy-discussion] Proposal of timeline for dropping Python 2.7 support
by Nathaniel Smith Nov. 17, 2017

Nov. 17, 2017

See Thomas's reply quoted below (it was rejected by the mailing list since he's not subscribed): On Nov 9, 2017 01:24, "Thomas Kluyver" <thomas(a)kluyver.me.uk> wrote: On Thu, Nov 9, 2017, at 08:52 AM, Nathaniel Smith wrote: On Nov 8, 2017 23:59, "Ralf Gommers" <ralf.gommers(a)gmail.com> wrote: Regarding http://www.python3statement.org/: I'd say that as long as there are people who want to spend their energy on the LTS release (contributors *and* enough maintainer power to … [View More]

11 16

PyArray_GETITEM and PyArray_SETITEM
by Mmanu Chaturvedi Nov. 17, 2017

Nov. 17, 2017

Hello All, I need to make use of the limited numpy API access Pybind11 gives, in order to add a feature to it. It seems to give access to functions from numpy_api.py [1]. I need to use PyArray_GETITEM and PyArray_SETITEM in order to get and set array elements [2], these functions / macros are not exposed via numpy_api.py, but are in `numpy/ndarraytypes.h`. We were wondering why aren't PyArray_GETITEM and PyArray_SETITEM exposed like the rest of numpy API? Is it possible to replicate the … [View More]

3 2

Upcoming revision of the BLAS standard
by Nathaniel Smith Nov. 15, 2017

Nov. 15, 2017

Hi NumPy and SciPy developers, Apparently there is some work afoot to update the BLAS standard, with a working document here: https://docs.google.com/document/d/1DY4ImZT1coqri2382GusXgBTTTVdBDvtD5I14QH… This seems like something where we might want to get involved in, so that the new standard works for us, and James Demmel (the first author on that proposal and a professor here at Berkeley) suggested they'd be interested to hear our thoughts. I'm not sure exactly what the process is here -- … [View More]

2 1