Mailman 3 October 2018 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker July 11, 2023

July 11, 2023

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem Feb. 18, 2023

Feb. 18, 2023

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How … [View More]

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell July 22, 2021

July 22, 2021

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program … [View More]makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil [View Less]

10 10

Problem with libgfortran installed with pip install numpy
by David Grote Nov. 12, 2018

Nov. 12, 2018

Hi - I have recently come across this problem. On my mac, I build a Fortran code, producing a shared object, that I import into Python along with numpy. This had been working fine until recently when I started seeing sag faults deep inside the Fortran code, usually in Fortran print statements. I tracked this down to a gfortran version issue. I use the brew installation of Python and gcc (using the most recent version, 8.2.0). gcc of course installs a version of libgfortran.dylib. Doing a lsof … [View More]

3 4

asanyarray vs. asarray
by Matti Picus Nov. 1, 2018

Nov. 1, 2018

12 24

Attribute hiding APIs for PyArrayObject
by Matti Picus Oct. 31, 2018

Oct. 31, 2018

TL;DR - should we revert the attribute-hiding constructs in ndarraytypes.h and unify PyArrayObject_fields with PyArrayObject? Background NumPy 1.8 deprecated direct access to PyArrayObject fields. It made PyArrayObject "opaque", and hid the fields behind a PyArrayObject_fields structure https://github.com/numpy/numpy/blob/v1.15.3/numpy/core/include/numpy/ndarra… with a comment about moving this to a private header. In order to access the fields, users are supposed to use … [View More]PyArray_FIELDNAME functions, like PyArray_DATA and PyArray_NDIM. It seems there were thoughts at the time that numpy might move away from a C-struct based underlying data structure. Other changes were also made to enum names, but those are relatively painless to find-and-replace. NumPy has a mechanism to manage deprecating APIs, C users define NPY_NO_DEPRICATED_API to a desired level, say NPY_1_8_API_VERSION, and can then access the API "as if" they were using NumPy 1.8. Users who do not define NPY_NO_DEPRICATED_API get a warning when compiling, and default to the pre-1.8 API (aliasing of PyArrayObject to PyArrayObject_fields and direct access to the C struct fields). This is convenient for downstream users, both since the new API does not provide much added value, and it is much easier to write a->nd than PyArray_NDIM(a). For instance, pandas uses direct assignment to the data field for fast json parsing https://github.com/pandas-dev/pandas/blob/master/pandas/_libs/src/ujson/pyt… via chunks. Working around the new API in pandas would require more engineering. Also, for example, cython has a mechanism to transpile python code into C, mapping slow python attribute lookup to fast C struct field access https://cython.readthedocs.io/en/latest/src/userguide/extension_types.html#… In a parallel but not really related universe, cython recently upgraded the object mapping so that we can quiet the annoying "size changed" runtime warning https://github.com/numpy/numpy/issues/11788 without requiring warning filters, but that requires updating the numpy.pxd file provided with cython, and it was proposed that NumPy actually vendor its own file rather than depending on the cython one (https://github.com/numpy/numpy/issues/11803). The problem We have now made further changes to our API. In NumPy 1.14 we changed UPDATEIFCOPY to WRITEBACKIFCOPY, and in 1.16 we would like to deprecate PyArray_SetNumericOps and PyArray_GetNumericOps. The strange warning when NPY_NO_DEPRICATED_API is annoying. The new API cannot be supported by cython without some deep surgery (https://github.com/cython/cython/pull/2640). When I tried dogfooding an updated numpy.pxd for the only cython code in NumPy, mtrand.pxy, I came across some of these issues (https://github.com/numpy/numpy/pull/12284). Forcing the new API will require downstream users to refactor code or re-engineer constructs, as in the pandas example above. The question Is the attribute-hiding effort worth it? Should we give up, revert the PyArrayObject/PyArrayObject_fields division and allow direct access from C to the numpy internals? Is there another path forward that is less painful? Matti [View Less]

7 6

Reminder: weekly status meeting 31.10 at 12:00 pacific time
by Matti Picus Oct. 30, 2018

Oct. 30, 2018

4 5

NumPy 1.15.4 release
by Charles R Harris Oct. 30, 2018

Oct. 30, 2018

Hi All, Just a heads up that I am planning on making a 1.15.4 release this coming weekend. The only fixes planned at this point are - BUG: Fix fill value in masked array '==' and '!=' ops, #12257 <https://github.com/numpy/numpy/pull/12257> - BUG: clear buffer_info_cache on scalar dealloc, #12249 <https://github.com/numpy/numpy/pull/12249> If there are other fixes that you think needed, please let me know. Chuck

1 0

Depreciating asfortranarray and ascontiguousarray
by Alex Rogozhnikov Oct. 30, 2018

Oct. 30, 2018

11 18

einops 0.1
by Alex Rogozhnikov Oct. 30, 2018

Oct. 30, 2018

1 0