Mailman 3 March 2019 - NumPy-Discussion

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem 18 Feb '23

18 Feb '23

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How do I avoid these messages to appear? I know that I could in principle use numpy.seterr. However, I do NOT want to remove these warnings for other potential divide/multiply/sqrt etc errors. Only when I am using a "where", to in fact avoid such warnings! Note that the warnings only happen once, but since I am going to release that code, I would like to avoid the user to get such messages which are irrelevant here (because I am testing, with the where, when NOT to divide by zero or take a sqrt of a negative number). thanks! Eric

5 4

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell 22 Jul '21

22 Jul '21

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

Does numpy depend upon a Fortran library?
by Marc F Paterno 10 Apr '19

10 Apr '19

Hello, I have encountered a problem with a binary incompatibility between the Fortran runtime library installed with numpy when using 'pip install --user numpy', and that used by the rest of my program, which is built using gfortran from GCC 8.2. The numpy installation uses libgfortran.5.dylib, and GCC 8.2 provides libgfortran.5.dylib. While investigating the source of this problem, I downloaded the numpy source (https://files.pythonhosted.org/packages/04/b6/d7faa70a3e3eac39f943cc6a6a64c…), and tried building it. The resulting libraries have no coupling to any Fortran library that I can find. I can find no Fortran source code files in the numpy source, except in tests or documentation. I am working on a MacBook laptop, running macOS Mojave, and so am using the Accelerate framework to supply BLAS. I do not understand why the pip installation of numpy includes a Fortran runtime library. Can someone explain to me what I am missing? thanks Marc

5 6

Beginner Help: Generating HTML using Sphinx
by Sanchi Vaishnavi 02 Apr '19

02 Apr '19

I was learning to get to $ make html to work. These are the final steps that I used on my test branch in my numpy repo: $ sphinx-build -b html doc/source builddir > >> build succeeded, 165 warnings. $ make html >> make: *** No rule to make target `html’. Stop. I checked one of the resultant HTML pages, and the changes had been made as expected. But to make sense of the last message, on reading on forums (StackOverflow), I found that I got that error because I was in the directory which* did not* contain the makefile. So: $ cd doc > $ make html > >> sphinx-build: error: unrecognized arguments: --keep-going > >> make: *** [html] Error 2 I can't make sense of the last two errors. I had followed the instructions from NumPy <http://www.numpy.org/devdocs/docs/howto_build_docs.html#sphinx-extensions> and Sphinx-doc <http://www.sphinx-doc.org/en/master/usage/quickstart.html#running-the-build> . I realize that this question is not about NumPy, so I appreciate any resource you can point me to. Thank you! Sanchi https://github.com/chelwin

5 8

Complex Normal Generator in NEP-19 extension
by Kevin Sheppard 31 Mar '19

31 Mar '19

One part of moving randomgen closer to fulfilling NEP-19 is rationalizing the API, especially new features not in RandomState. Matti Picus has made a lot of progress in getting it integrated, especially the part of replacing RandomState shimed version of the new generator. There is only one new method in the generator, a scalar generator for complex normals. It is scalar in the sense that it is the complex version of np.random.normal, and so supports broadcasting. This was written based on some GH comments. This would be a new API and so it needs to come here first to see if there is any support. If there is support, then it will appear in the new RandomGenerator, but not the RandomState replacement. If not, then we can just delete it. Kevin

3 3

Re: [Numpy-discussion] Complex Normal Generator in NEP-19 extension
by Peter Creasey 30 Mar '19

30 Mar '19

If there is support, then it will appear in the new RandomGenerator, but > not the RandomState replacement. If not, then we can just delete it. > > +1 for complex normal generation.

1 0

Outreachy applicant introduction
by Parul Unofficial 30 Mar '19

30 Mar '19

Hello! I'm Parul Aggarwal, a pre-final year student from India pursuing my bachelor's in Computer Science. I'm comfortable programming in C++ and Python and have also worked previously on some projects based on flask, Django. I'm an outreachy applicant and really excited to contribute to this large community and I hope, I'm not too late to start with my contributions. Any guidance regarding the same would be really helpful. Thank You! Best Parul Aggarwal

2 1

[Outreachy Program][Improve C API documentation for NumPy]
by hagar haytham 30 Mar '19

30 Mar '19

Hey I am Hagar Haytham, a Computer Engineering student. I have some experience in python. I would like to be a part from this community and contribute to it. I am just making sure that you're still accepting applicants and hope i am not too late as I am still familiarizing myself with the environment. Thanks Hagar

1 0

Outreachy applicant introduction
by Maya Dara Sofia Pasiliao 29 Mar '19

29 Mar '19

Hello, My name is Maya Pasiliao, a computer science undergraduate in NYC. I am an outreachy applicant as well and have seen some of the instructions for getting started in the other emails. I just wanted to introduce myself and say I am eager to get started. Best, Maya Pasiliao

3 2

Outreachy Applicant
by Aishwarya Dash 28 Mar '19

28 Mar '19

Hi, I'm Aishwarya Dash, an applicant for Outreachy. I am quite interested to work on the documentation for Numpy, and I would really appreciate guidelines on how to contribute to the docs and what ideas I should work on in order to make my application better.

3 2

NumPy-Discussion March 2019