Mailman 3 September 2020 - NumPy-Discussion

mixed mode arithmetic
by Neal Becker July 11, 2023

July 11, 2023

I've been browsing the numpy source. I'm wondering about mixed-mode arithmetic on arrays. I believe the way numpy handles this is that it never does mixed arithmetic, but instead converts arrays to a common type. Arguably, that might be efficient for a mix of say, double and float. Maybe not. But for a mix of complex and a scalar type (say, CDouble * Double), it's clearly suboptimal in efficiency. So, do I understand this correctly? If so, is that something we should improve?

4 6

Invalid value encoutered : how to prevent numpy.where to do this?
by Eric Emsellem Feb. 19, 2023

Feb. 19, 2023

Dear all, I have a code using lots of "numpy.where" to make some constrained calculations as in: data = arange(10) result = np.where(data == 0, 0., 1./data) # or data1 = arange(10) data2 = arange(10)+1.0 result = np.where(data1 > data2, np.sqrt(data1-data2), np.sqrt(data2-data2)) which then produces warnings like: /usr/bin/ipython:1: RuntimeWarning: invalid value encountered in sqrt or for the first example: /usr/bin/ipython:1: RuntimeWarning: divide by zero encountered in divide How do I avoid these messages to appear? I know that I could in principle use numpy.seterr. However, I do NOT want to remove these warnings for other potential divide/multiply/sqrt etc errors. Only when I am using a "where", to in fact avoid such warnings! Note that the warnings only happen once, but since I am going to release that code, I would like to avoid the user to get such messages which are irrelevant here (because I am testing, with the where, when NOT to divide by zero or take a sqrt of a negative number). thanks! Eric

5 4

Documentation Team meeting - Monday June 8th
by Melissa Mendonça Dec. 4, 2022

Dec. 4, 2022

Hi all! A reminder that on Monday, June 8, we have another documentation team meeting at 3PM UTC**. If you wish to join on Zoom, you need to use this link https://zoom.us/j/420005230 Here's the permanent hackmd document with the meeting notes: https://hackmd.io/oB_boakvRqKR-_2jRV-Qjg <https://www.google.com/url?q=https%3A%2F%2Fhackmd.io%2FoB_boakvRqKR-_2jRV-Q…> Hope to see you around (especially if you want to introduce yourself or discuss ideas for Google Season of Docs). ** You can click this link to get the correct time at your timezone: https://www.timeanddate.com/worldclock/fixedtime.html?msg=NumPy+Documentati… - Melissa

6 74

[Feature Request] Add alias of np.concatenate as np.concat
by Iordanis Fostiropoulos May 11, 2022

May 11, 2022

In regard to Feature Request: https://github.com/numpy/numpy/issues/16469 It was suggested to sent to the mailing list. I think I can make a strong point as to why the support for this naming convention would make sense. Such as it would follow other frameworks that often work alongside numpy such as tensorflow. For backward compatibility, it can simply be an alias to np.concatenate I often convert portions of code from tf to np, it is as simple as changing the base module from tf to np. e.g. np.expand_dims -> tf.expand_dims. This is done either in debugging (e.g. converting tf to np without eager execution to debug portion of the code), or during prototyping, e.g. develop in numpy and convert in tf. I find myself more than at one occasion to getting syntax errors because of this particular function np.concatenate. It is unnecessarily long. I imagine there are more people that also run into the same problems. Pandas uses concat (torch on the other extreme uses simply cat, which I don't think is as descriptive).

7 6

Re: [Numpy-discussion] example reading binary Fortran file
by Neil Martinsen-Burrell July 23, 2021

July 23, 2021

David Froger <david.froger.info <at> gmail.com> writes: > Hy,My question is about reading Fortran binary file (oh no this question > again...) I've posted this before, but I finally got it cleaned up for the Cookbook. For this purpose I use a subclass of file that has methods for reading unformatted Fortran data. See http://www.scipy.org/Cookbook/FortranIO/FortranFile. I'd gladly see this in numpy or scipy somewhere, but I'm not sure where it belongs. > program makeArray > implicit none > integer,parameter:: nx=10,ny=20 > real(4),dimension(nx,ny):: ux,uy,p > integer :: i,j > open(11,file='uxuyp.bin',form='unformatted') > do i = 1,nx > do j = 1,ny > ux(i,j) = real(i*j) > uy(i,j) = real(i)/real(j) > p (i,j) = real(i) + real(j) > enddo > enddo > write(11) ux,uy > write(11) p > close(11) > end program makeArray When I run the above program compiled with gfortran on my Intel Mac, I can read it back with:: >>> import numpy as np >>> from fortranfile import FortranFile >>> f=FortranFile('uxuyp.bin', endian='<') >>> uxuy = f.readReals(prec='f') # 'f' for default reals >>> len(uxuy) 400 >>> ux = np.array(uxuy[:200]).reshape((20,10)).T >>> uy = np.array(uxuy[200:]).reshape((20,10)).T >>> p = f.readReals('f').reshape((20,10)).T >>> ux array([[ 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20.], [ 2., 4., 6., 8., 10., 12., 14., 16., 18., 20., 22., 24., 26., 28., 30., 32., 34., 36., 38., 40.], [ 3., 6., 9., 12., 15., 18., 21., 24., 27., 30., 33., 36., 39., 42., 45., 48., 51., 54., 57., 60.], [ 4., 8., 12., 16., 20., 24., 28., 32., 36., 40., 44., 48., 52., 56., 60., 64., 68., 72., 76., 80.], [ 5., 10., 15., 20., 25., 30., 35., 40., 45., 50., 55., 60., 65., 70., 75., 80., 85., 90., 95., 100.], [ 6., 12., 18., 24., 30., 36., 42., 48., 54., 60., 66., 72., 78., 84., 90., 96., 102., 108., 114., 120.], [ 7.,Proxy-Connection: keep-alive Cache-Control: max-age=0 14., 21., 28., 35., 42., 49., 56., 63., 70., 77., 84., 91., 98., 105., 112., 119., 126., 133., 140.], [ 8., 16., 24., 32., 40., 48., 56., 64., 72., 80., 88., 96., 104., 112., 120., 128., 136., 144., 152., 160.], [ 9., 18., 27., 36., 45., 54., 63., 72., 81., 90., 99., 108., 117., 126., 135., 144., 153., 162., 171., 180.], [ 10., 20., 30., 40., 50., 60., 70., 80., 90., 100., 110., 120., 130., 140., 150., 160., 170., 180., 190., 200.]]) >>> uy array([[ 1. , 0.5 , 0.33333334, 0.25 , 0.2 , 0.16666667, 0.14285715, 0.125 , 0.11111111, 0.1 , 0.09090909, 0.08333334, 0.07692308, 0.07142857, 0.06666667, 0.0625 , 0.05882353, 0.05555556, 0.05263158, 0.05 ], [ 2. , 1. , 0.66666669, 0.5 , 0.40000001, 0.33333334, 0.2857143 , 0.25 , 0.22222222, 0.2 , 0.18181819, 0.16666667, 0.15384616, 0.14285715, 0.13333334, 0.125 , 0.11764706, 0.11111111, 0.10526316, 0.1 ], [ 3. , 1.5 , 1. , 0.75 , 0.60000002, 0.5 , 0.42857143, 0.375 , 0.33333334, 0.30000001, 0.27272728, 0.25 , 0.23076923, 0.21428572, 0.2 , 0.1875 , 0.17647059, 0.16666667, 0.15789473, 0.15000001], [ 4. , 2. , 1.33333337, 1. , 0.80000001, 0.66666669, 0.5714286 , 0.5 , 0.44444445, 0.40000001, 0.36363637, 0.33333334, 0.30769232, 0.2857143 , 0.26666668, 0.25 , 0.23529412, 0.22222222, 0.21052632, 0.2 ], [ 5. , 2.5 , 1.66666663, 1.25 , 1. , 0.83333331, 0.71428573, 0.625 , 0.55555558, 0.5 , 0.45454547, 0.41666666, 0.38461539, 0.35714287, 0.33333334, 0.3125 , 0.29411766, 0.27777779, 0.2631579 , 0.25 ], [ 6. , 3. , 2. , 1.5 , 1.20000005, 1. , 0.85714287, 0.75 , 0.66666669, 0.60000002, 0.54545456, 0.5 , 0.46153846, 0.42857143, 0.40000001, 0.375 , 0.35294119, 0.33333334, 0.31578946, 0.30000001], [ 7. , 3.5 , 2.33333325, 1.75 , 1.39999998, 1.16666663, 1. , 0.875 , 0.77777779, 0.69999999, 0.63636363, 0.58333331, 0.53846157, 0.5 , 0.46666667, 0.4375 , 0.41176471, 0.3888889 , 0.36842105, 0.34999999], [ 8. , 4. , 2.66666675, 2. , 1.60000002, 1.33333337, 1.14285719, 1. , 0.8888889 , 0.80000001, 0.72727275, 0.66666669, 0.61538464, 0.5714286 , 0.53333336, 0.5 , 0.47058824, 0.44444445, 0.42105263, 0.40000001], [ 9. , 4.5 , 3. , 2.25 , 1.79999995, 1.5 , 1.28571427, 1.125 , 1. , 0.89999998, 0.81818181, 0.75 , 0.69230771, 0.64285713, 0.60000002, 0.5625 , 0.52941179, 0.5 , 0.47368422, 0.44999999], [ 10. , 5. , 3.33333325, 2.5 , 2. , 1.66666663, 1.42857146, 1.25 , 1.11111116, 1. , 0.90909094, 0.83333331, 0.76923078, 0.71428573, 0.66666669, 0.625 , 0.58823532, 0.55555558, 0.52631581, 0.5 ]]) >>> p array([[ 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21.], [ 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22.], [ 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23.], [ 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24.], [ 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25.], [ 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26.], [ 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27.], [ 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28.], [ 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29.], [ 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30.]]) Note that you have to provide the shape information for ux and uy because fortran writes them together as a stream of 400 numbers. -Neil

10 10

start of an array (tensor) and dataframe API standardization initiative
by Ralf Gommers Nov. 14, 2020

Nov. 14, 2020

Hi all, I'd like to share this announcement blog post about the creation of a consortium for array and dataframe API standardization here: https://data-apis.org/blog/announcing_the_consortium/. It's still in the beginning stages, but starting to take shape. We have participation from one or more maintainers of most array and tensor libraries - NumPy, TensorFlow, PyTorch, MXNet, Dask, JAX, Xarray. Stephan Hoyer, Travis Oliphant and myself have been providing input from a NumPy perspective. The effort is very much related to some of the interoperability work we've been doing in NumPy (e.g. it could provide an answer to what's described in https://numpy.org/neps/nep-0037-array-module.html#requesting-restricted-sub… ). At this point we're looking for feedback from maintainers at a high level (see the blog post for details). Also important: the python-record-api tooling and data in its repo has very granular API usage data, of the kind we could really use when making decisions that impact backwards compatibility. Cheers, Ralf

4 7

Einops cross-linking from einsum
by Alex Rogozhnikov Oct. 3, 2020

Oct. 3, 2020

3 3

NumPy Community Meeting Wednesday
by Sebastian Berg Sept. 30, 2020

Sept. 30, 2020

Hi all, There will be a NumPy Community meeting Wednesday September 16th at 1pm Pacific Time (20:00 UTC). Everyone is invited and encouraged to join in and edit the work-in-progress meeting topics and notes at: https://hackmd.io/76o-IxCjQX2mOXO_wwkcpg?both Best wishes Sebastian

1 0

datetime64/timedelta64 support in linspace
by Lee Johnston Sept. 30, 2020

Sept. 30, 2020

I propose adding support for datetime64/timedelta64 in linspace and solicit feedback on the feature. As is, linspace raises UFuncTypeError when parameters start and stop are datetime64/timedelta64. The complementary function arange supports these types. Work was started on this feature in PR 14700 <https://github.com/numpy/numpy/pull/14700> but has stalled and I would like to complete it, but there are some issues worth getting feedback on. 1. Supporting datetime64/timedelta64 will require a special case code path within linspace. The code path is selected based on the start parameter data type. 2. The output dtype has to be explicitly set. 3. The step size resolution is determined by the lesser resolution of start and dtype. Issue 3 may lead to an unexpected result for an end-user. For example, >>> import numpy as np >>> np.linspace(np.timedelta64(0, "s"), np.timedelta64(1, "s"), 4, dtype="timedelta64[ms]") array([ 0, 0, 0, 1000], dtype='timedelta64[ms]') The existing solution in PR 14700 does not override the end-user's start and dtype resolution. In this case, the end-user would have to set both start and dtype to "ms" resolution to get the expected result. >>> np.linspace(np.timedelta64(0, "ms"), np.timedelta64(1, "s"), 4, dtype="timedelta64[ms]") array([ 0, 333, 666, 1000], dtype='timedelta64[ms]') In PR 14700, there is some discussion of "NaT" handling. In my implementation, "NaT" works the same as "NaN" and I am not aware of any corner cases.

2 1

ANN: SfePy 2020.3
by Robert Cimrman Sept. 29, 2020

Sept. 29, 2020

I am pleased to announce the release of SfePy 2020.3. Description ----------- SfePy (simple finite elements in Python) is a software for solving systems of coupled partial differential equations by finite element methods. It is distributed under the new BSD license. Home page: https://sfepy.org Mailing list: https://mail.python.org/mm3/mailman3/lists/sfepy.python.org/ Git (source) repository, issue tracker: https://github.com/sfepy/sfepy Highlights of this release -------------------------- - new script for visualizations based on pyvista - generalized Yeoh hyperelastic term + example For full release notes see [1]. Cheers, Robert Cimrman [1] http://docs.sfepy.org/doc/release_notes.html#id1 --- Contributors to this release in alphabetical order: Robert Cimrman Jan Heczko Vladimir Lukes

1 0