On Sat, Mar 15, 2014 at 10:53 PM, <josef.pktd@gmail.com> wrote:



On Sat, Mar 15, 2014 at 11:30 PM, Charles R Harris <charlesr.harris@gmail.com> wrote:



On Sat, Mar 15, 2014 at 7:20 PM, <josef.pktd@gmail.com> wrote:



On Fri, Mar 14, 2014 at 11:41 PM, Nathaniel Smith <njs@pobox.com> wrote:
Hi all,

Here's the main blocker for adding a matrix multiply operator '@' to Python: we need to decide what we think its precedence and associativity should be. I'll explain what that means so we're on the same page, and what the choices are, and then we can all argue about it. But even better would be if we could get some data to guide our decision, and this would be a lot easier if some of you all can help; I'll suggest some ways you might be able to do that.

So! Precedence and left- versus right-associativity. If you already know what these are you can skim down until you see CAPITAL LETTERS.

We all know what precedence is. Code like this:
  a + b * c
gets evaluated as:
  a + (b * c)
because * has higher precedence than +. It "binds more tightly", as they say. Python's complete precedence able is here:
  http://docs.python.org/3/reference/expressions.html#operator-precedence

Associativity, in the parsing sense, is less well known, though it's just as important. It's about deciding how to evaluate code like this:
  a * b * c
Do we use
  a * (b * c)    # * is "right associative"
or
  (a * b) * c    # * is "left associative"
? Here all the operators have the same precedence (because, uh... they're the same operator), so precedence doesn't help. And mostly we can ignore this in day-to-day life, because both versions give the same answer, so who cares. But a programming language has to pick one (consider what happens if one of those objects has a non-default __mul__ implementation). And of course it matters a lot for non-associative operations like
  a - b - c
or
  a / b / c
So when figuring out order of evaluations, what you do first is check the precedence, and then if you have multiple operators next to each other with the same precedence, you check their associativity. Notice that this means that if you have different operators that share the same precedence level (like + and -, or * and /), then they have to all have the same associativity. All else being equal, it's generally considered nice to have fewer precedence levels, because these have to be memorized by users.

Right now in Python, every precedence level is left-associative, except for '**'. If you write these formulas without any parentheses, then what the interpreter will actually execute is:
  (a * b) * c
  (a - b) - c
  (a / b) / c
but
  a ** (b ** c)

Okay, that's the background. Here's the question. We need to decide on precedence and associativity for '@'. In particular, there are three different options that are interesting:

OPTION 1 FOR @:
Precedence: same as *
Associativity: left
My shorthand name for it: "same-left" (yes, very creative)

This means that if you don't use parentheses, you get:
   a @ b @ c  ->  (a @ b) @ c
   a * b @ c  ->  (a * b) @ c
   a @ b * c  ->  (a @ b) * c

OPTION 2 FOR @:
Precedence: more-weakly-binding than *
Associativity: right
My shorthand name for it: "weak-right"

This means that if you don't use parentheses, you get:
   a @ b @ c  ->  a @ (b @ c)
   a * b @ c  ->  (a * b) @ c
   a @ b * c  ->  a @ (b * c)

OPTION 3 FOR @:
Precedence: more-tightly-binding than *
Associativity: right
My shorthand name for it: "tight-right"

This means that if you don't use parentheses, you get:
   a @ b @ c  ->  a @ (b @ c)
   a * b @ c  ->  a * (b @ c)
   a @ b * c  ->  (a @ b) * c

We need to pick which of which options we think is best, based on whatever reasons we can think of, ideally more than "hmm, weak-right gives me warm fuzzy feelings" ;-). (In principle the other 2 possible options are tight-left and weak-left, but there doesn't seem to be any argument in favor of either, so we'll leave them out of the discussion.)

Some things to consider:

* and @ are actually not associative (in the math sense) with respect to each other, i.e., (a * b) @ c and a * (b @ c) in general give different results when 'a' is not a scalar. So considering the two expressions 'a * b @ c' and 'a @ b * c', we can see that each of these three options gives produces different results in some cases.

"Same-left" is the easiest to explain and remember, because it's just, "@ acts like * and /". So we already have to know the rule in order to understand other non-associative expressions like a / b / c or a - b - c, and it'd be nice if the same rule applied to things like a * b @ c so we only had to memorize *one* rule. (Of course there's ** which uses the opposite rule, but I guess everyone internalized that one in secondary school; that's not true for * versus @.) This is definitely the default we should choose unless we have a good reason to do otherwise.

BUT: there might indeed be a good reason to do otherwise, which is the whole reason this has come up. Consider:
    Mat1 @ Mat2 @ vec
Obviously this will execute much more quickly if we do
    Mat1 @ (Mat2 @ vec)
because that results in two cheap matrix-vector multiplies, while
    (Mat1 @ Mat2) @ vec
starts out by doing an expensive matrix-matrix multiply. So: maybe @ should be right associative, so that we get the fast behaviour without having to use explicit parentheses! /If/ these kinds of expressions are common enough that having to remember to put explicit parentheses in all the time is more of a programmer burden than having to memorize a special associativity rule for @. Obviously Mat @ Mat @ vec is more common than vec @ Mat @ Mat, but maybe they're both so rare that it doesn't matter in practice -- I don't know.

Also, if we do want @ to be right associative, then I can't think of any clever reasons to prefer weak-right over tight-right, or vice-versa. For the scalar multiplication case, I believe both options produce the same result in the same amount of time. For the non-scalar case, they give different answers. Do people have strong intuitions about what expressions like
  a * b @ c
  a @ b * c
should do actually? (I'm guessing not, but hey, you never know.)

And, while intuition is useful, it would be really *really* nice to be basing these decisions on more than *just* intuition, since whatever we decide will be subtly influencing the experience of writing linear algebra code in Python for the rest of time. So here's where I could use some help. First, of course, if you have any other reasons why one or the other of these options is better, then please share! But second, I think we need to know something about how often the Mat @ Mat @ vec type cases arise in practice. How often do non-scalar * and np.dot show up in the same expression? How often does it look like a * np.dot(b, c), and how often does it look like np.dot(a * b, c)? How often do we see expressions like np.dot(np.dot(a, b), c), and how often do we see expressions like np.dot(a, np.dot(b, c))? This would really help guide the debate. I don't have this data, and I'm not sure the best way to get it. A super-fancy approach would be to write a little script that uses the 'ast' module to count things automatically. A less fancy approach would be to just pick some code you've written, or a well-known package, grep through for calls to 'dot', and make notes on what you see. (An advantage of the less-fancy approach is that as a human you might be able to tell the difference between scalar and non-scalar *, or check whether it actually matters what order the 'dot' calls are done in.)

-n

--
Nathaniel J. Smith
Postdoctoral researcher - Informatics - University of Edinburgh
http://vorpus.org


_______________________________________________
NumPy-Discussion mailing list
NumPy-Discussion@scipy.org
http://mail.scipy.org/mailman/listinfo/numpy-discussion



I'm in favor of same-left because it's the easiest to remember.
with scalar factors it is how I read formulas.

Note that if there are no (interior) vectors involved then the two methods of association give theoretically identical results. But when there is a vector on the right and no vector on the left, then right association is more efficient and likely more numerically accurate.

What's so special about a vector on the right? What if I have a vector on the left, or, as is pretty common, a quadratic form?

A vector on the right is a fairly common pattern. If one were to use parenthesis as you did in your example to gain efficiency, one would write 'A@(B@(C@v))' as all the multiplications are then matrix -- vector, which is computationally cheaper than matrix -- matrix. When the '@' operator is right associative the parenthesis don't need to be used to get the same result. Of course, for the less common pattern of a single (row) vector on the left, left associativity would be preferred. For vectors on both ends it doesn't matter. So the choice is driven simply by which pattern is the most common.

Function composition works the same way: g@f@h(x) = g(f(h(x))). That is, the traditional notation goes right to left.

<snip>

Chuck