Hi all, On behalf of the SciPy development team I'm pleased to announce the release candidate SciPy 1.6.0rc1. Please help us test this pre-release. Sources and binary wheels can be found at: https://pypi.org/project/scipy/ and at: https://github.com/scipy/scipy/releases/tag/v1.6.0rc1 One of a few ways to install the release candidate with pip: pip install scipy==1.6.0rc1 ========================== SciPy 1.6.0 Release Notes ========================== Note: Scipy 1.6.0 is not released yet! SciPy 1.6.0 is the culmination of 6 months of hard work. It contains many new features, numerous bug-fixes, improved test coverage and better documentation. There have been a number of deprecations and API changes in this release, which are documented below. All users are encouraged to upgrade to this release, as there are a large number of bug-fixes and optimizations. Before upgrading, we recommend that users check that their own code does not use deprecated SciPy functionality (to do so, run your code with ``python -Wd`` and check for ``DeprecationWarning`` s). Our development attention will now shift to bug-fix releases on the 1.6.x branch, and on adding new features on the master branch. This release requires Python 3.7+ and NumPy 1.16.5 or greater. For running on PyPy, PyPy3 6.0+ is required. Highlights of this release --------------------------------- - `scipy.ndimage` improvements: Fixes and ehancements to boundary extension modes for interpolation functions. Support for complex-valued inputs in many filtering and interpolation functions. New ``grid_mode`` option for `scipy.ndimage.zoom` to enable results consistent with scikit-image's ``rescale``. - `scipy.optimize.linprog` has fast, new methods for large, sparse problems from the ``HiGHS`` library. - `scipy.stats` improvements including new distributions, a new test, and enhancements to existing distributions and tests New features ============ `scipy.special` improvements ---------------------------------------- `scipy.special` now has improved support for 64-bit ``LAPACK`` backend `scipy.odr` improvements ----------------------------------- `scipy.odr` now has support for 64-bit integer ``BLAS`` `scipy.odr.ODR` has gained an optional ``overwrite`` argument so that existing files may be overwritten. `scipy.integrate` improvements ------------------------------------------ Some renames of functions with poor names were done, with the old names retained without being in the reference guide for backwards compatibility reasons: - ``integrate.simps`` was renamed to ``integrate.simpson`` - ``integrate.trapz`` was renamed to ``integrate.trapezoid`` - ``integrate.cumtrapz`` was renamed to ``integrate.cumulative_trapezoid`` `scipy.cluster` improvements --------------------------------------- `scipy.cluster.hierarchy.DisjointSet` has been added for incremental connectivity queries. `scipy.cluster.hierarchy.dendrogram` return value now also includes leaf color information in `leaves_color_list`. `scipy.interpolate` improvements -------------------------------------------- `scipy.interpolate.interp1d` has a new method ``nearest-up``, similar to the existing method ``nearest`` but rounds half-integers up instead of down. `scipy.io` improvements -------------------------------- Support has been added for reading arbitrary bit depth integer PCM WAV files from 1- to 32-bit, including the commonly-requested 24-bit depth. `scipy.linalg` improvements ------------------------------------- The new function `scipy.linalg.matmul_toeplitz` uses the FFT to compute the product of a Toeplitz matrix with another matrix. `scipy.linalg.sqrtm` and `scipy.linalg.logm` have performance improvements thanks to additional Cython code. Python ``LAPACK`` wrappers have been added for ``pptrf``, ``pptrs``, ``ppsv``, ``pptri``, and ``ppcon``. `scipy.linalg.norm` and the ``svd`` family of functions will now use 64-bit integer backends when available. `scipy.ndimage` improvements ----------------------------------------- `scipy.ndimage.convolve`, `scipy.ndimage.correlate` and their 1d counterparts now accept both complex-valued images and/or complex-valued filter kernels. All convolution-based filters also now accept complex-valued inputs (e.g. ``gaussian_filter``, ``uniform_filter``, etc.). Multiple fixes and enhancements to boundary handling were introduced to `scipy.ndimage` interpolation functions (i.e. ``affine_transform``, ``geometric_transform``, ``map_coordinates``, ``rotate``, ``shift``, ``zoom``). A new boundary mode, ``grid-wrap`` was added which wraps images periodically, using a period equal to the shape of the input image grid. This is in contrast to the existing ``wrap`` mode which uses a period that is one sample smaller than the original signal extent along each dimension. A long-standing bug in the ``reflect`` boundary condition has been fixed and the mode ``grid-mirror`` was introduced as a synonym for ``reflect``. A new boundary mode, ``grid-constant`` is now available. This is similar to the existing ndimage ``constant`` mode, but interpolation will still performed at coordinate values outside of the original image extent. This ``grid-constant`` mode is consistent with OpenCV's ``BORDER_CONSTANT`` mode and scikit-image's ``constant`` mode. Spline pre-filtering (used internally by ``ndimage`` interpolation functions when ``order >= 2``), now supports all boundary modes rather than always defaulting to mirror boundary conditions. The standalone functions ``spline_filter`` and ``spline_filter1d`` have analytical boundary conditions that match modes ``mirror``, ``grid-wrap`` and ``reflect``. `scipy.ndimage` interpolation functions now accept complex-valued inputs. In this case, the interpolation is applied independently to the real and imaginary components. The ``ndimage`` tutorials (https://docs.scipy.org/doc/scipy/reference/tutorial/ndimage.html) have been updated with new figures to better clarify the exact behavior of all of the interpolation boundary modes. `scipy.ndimage.zoom` now has a ``grid_mode`` option that changes the coordinate of the center of the first pixel along an axis from 0 to 0.5. This allows resizing in a manner that is consistent with the behavior of scikit-image's ``resize`` and ``rescale`` functions (and OpenCV's ``cv2.resize``). `scipy.optimize` improvements ----------------------------------------- `scipy.optimize.linprog` has fast, new methods for large, sparse problems from the ``HiGHS`` C++ library. ``method='highs-ds'`` uses a high performance dual revised simplex implementation (HSOL), ``method='highs-ipm'`` uses an interior-point method with crossover, and ``method='highs'`` chooses between the two automatically. These methods are typically much faster and often exceed the accuracy of other ``linprog`` methods, so we recommend explicitly specifying one of these three method values when using ``linprog``. `scipy.optimize.quadratic_assignment` has been added for approximate solution of the quadratic assignment problem. `scipy.optimize.linear_sum_assignment` now has a substantially reduced overhead for small cost matrix sizes `scipy.optimize.least_squares` has improved performance when the user provides the jacobian as a sparse jacobian already in ``csr_matrix`` format `scipy.optimize.linprog` now has an ``rr_method`` argument for specification of the method used for redundancy handling, and a new method for this purpose is available based on the interpolative decomposition approach. `scipy.signal` improvements -------------------------------------- `scipy.signal.gammatone` has been added to design FIR or IIR filters that model the human auditory system. `scipy.signal.iircomb` has been added to design IIR peaking/notching comb filters that can boost/attenuate a frequency from a signal. `scipy.signal.sosfilt` performance has been improved to avoid some previously- observed slowdowns `scipy.signal.windows.taylor` has been added--the Taylor window function is commonly used in radar digital signal processing `scipy.signal.gauss_spline` now supports ``list`` type input for consistency with other related SciPy functions `scipy.signal.correlation_lags` has been added to allow calculation of the lag/ displacement indices array for 1D cross-correlation. `scipy.sparse` improvements --------------------------------------- A solver for the minimum weight full matching problem for bipartite graphs, also known as the linear assignment problem, has been added in `scipy.sparse.csgraph.min_weight_full_bipartite_matching`. In particular, this provides functionality analogous to that of `scipy.optimize.linear_sum_assignment`, but with improved performance for sparse inputs, and the ability to handle inputs whose dense representations would not fit in memory. The time complexity of `scipy.sparse.block_diag` has been improved dramatically from quadratic to linear. `scipy.sparse.linalg` improvements ----------------------------------------------- The vendored version of ``SuperLU`` has been updated `scipy.fft` improvements --------------------------------- The vendored ``pocketfft`` library now supports compiling with ARM neon vector extensions and has improved thread pool behavior. `scipy.spatial` improvements --------------------------------------- The python implementation of ``KDTree`` has been dropped and ``KDTree`` is now implemented in terms of ``cKDTree``. You can now expect ``cKDTree``-like performance by default. This also means ``sys.setrecursionlimit`` no longer needs to be increased for querying large trees. ``transform.Rotation`` has been updated with support for Modified Rodrigues Parameters alongside the existing rotation representations (PR gh-12667). `scipy.spatial.transform.Rotation` has been partially cythonized, with some performance improvements observed `scipy.spatial.distance.cdist` has improved performance with the ``minkowski`` metric, especially for p-norm values of 1 or 2. `scipy.stats` improvements ------------------------------------ New distributions have been added to `scipy.stats`: - The asymmetric Laplace continuous distribution has been added as `scipy.stats.laplace_asymmetric`. - The negative hypergeometric distribution has been added as `scipy.stats.nhypergeom`. - The multivariate t distribution has been added as `scipy.stats.multivariate_t`. - The multivariate hypergeometric distribution has been added as `scipy.stats.multivariate_hypergeom`. The ``fit`` method has been overridden for several distributions (``laplace``, ``pareto``, ``rayleigh``, ``invgauss``, ``logistic``, ``gumbel_l``, ``gumbel_r``); they now use analytical, distribution-specific maximum likelihood estimation results for greater speed and accuracy than the generic (numerical optimization) implementation. The one-sample Cramér-von Mises test has been added as `scipy.stats.cramervonmises`. An option to compute one-sided p-values was added to `scipy.stats.ttest_1samp`, `scipy.stats.ttest_ind_from_stats`, `scipy.stats.ttest_ind` and `scipy.stats.ttest_rel`. The function `scipy.stats.kendalltau` now has an option to compute Kendall's tau-c (also known as Stuart's tau-c), and support has been added for exact p-value calculations for sample sizes ``> 171``. `stats.trapz` was renamed to `stats.trapezoid`, with the former name retained as an alias for backwards compatibility reasons. The function `scipy.stats.linregress` now includes the standard error of the intercept in its return value. The ``_logpdf``, ``_sf``, and ``_isf`` methods have been added to `scipy.stats.nakagami`; ``_sf`` and ``_isf`` methods also added to `scipy.stats.gumbel_r` The ``sf`` method has been added to `scipy.stats.levy` and `scipy.stats.levy_l` for improved precision. `scipy.stats.binned_statistic_dd` performance improvements for the following computed statistics: ``max``, ``min``, ``median``, and ``std``. We gratefully acknowledge the Chan-Zuckerberg Initiative Essential Open Source Software for Science program for supporting many of these improvements to `scipy.stats`. Deprecated features ================ `scipy.spatial` changes -------------------------------- Calling ``KDTree.query`` with ``k=None`` to find all neighbours is deprecated. Use ``KDTree.query_ball_point`` instead. ``distance.wminkowski`` was deprecated; use ``distance.minkowski`` and supply weights with the ``w`` keyword instead. Backwards incompatible changes ========================== `scipy` changes ---------------------- Using `scipy.fft` as a function aliasing ``numpy.fft.fft`` was removed after being deprecated in SciPy ``1.4.0``. As a result, the `scipy.fft` submodule must be explicitly imported now, in line with other SciPy subpackages. `scipy.signal` changes -------------------------------- The output of ``decimate``, ``lfilter_zi``, ``lfiltic``, ``sos2tf``, and ``sosfilt_zi`` have been changed to match ``numpy.result_type`` of their inputs. The window function ``slepian`` was removed. It had been deprecated since SciPy ``1.1``. `scipy.spatial` changes -------------------------------- ``cKDTree.query`` now returns 64-bit rather than 32-bit integers on Windows, making behaviour consistent between platforms (PR gh-12673). `scipy.stats` changes ----------------------------- The ``frechet_l`` and ``frechet_r`` distributions were removed. They were deprecated since SciPy ``1.0``. Other changes ============= ``setup_requires`` was removed from ``setup.py``. This means that users invoking ``python setup.py install`` without having numpy already installed will now get an error, rather than having numpy installed for them via ``easy_install``. This install method was always fragile and problematic, users are encouraged to use ``pip`` when installing from source. - - Fixed a bug in `scipy.optimize.dual_annealing` ``accept_reject`` calculation that caused uphill jumps to be accepted less frequently. - - The time required for (un)pickling of `scipy.stats.rv_continuous`, `scipy.stats.rv_discrete`, and `scipy.stats.rv_frozen` has been significantly reduced (gh12550). Inheriting subclasses should note that ``__setstate__`` no longer calls ``__init__`` upon unpickling. Authors ======= * @endolith * @vkk800 * aditya + * George Bateman + * Christoph Baumgarten * Peter Bell * Tobias Biester + * Keaton J. Burns + * Evgeni Burovski * Rüdiger Busche + * Matthias Bussonnier * Dominic C + * Corallus Caninus + * CJ Carey * Thomas A Caswell * chapochn + * Lucía Cheung * Zach Colbert + * Coloquinte + * Yannick Copin + * Devin Crowley + * Terry Davis + * Michaël Defferrard + * devonwp + * Didier + * divenex + * Thomas Duvernay + * Eoghan O'Connell + * Gökçen Eraslan * Kristian Eschenburg + * Ralf Gommers * Thomas Grainger + * GreatV + * Gregory Gundersen + * h-vetinari + * Matt Haberland * Mark Harfouche + * He He + * Alex Henrie * Chun-Ming Huang + * Martin James McHugh III + * Alex Izvorski + * Joey + * ST John + * Jonas Jonker + * Julius Bier Kirkegaard * Marcin Konowalczyk + * Konrad0 * Sam Van Kooten + * Sergey Koposov + * Peter Mahler Larsen * Eric Larson * Antony Lee * Gregory R. Lee * Loïc Estève * Jean-Luc Margot + * MarkusKoebis + * Nikolay Mayorov * G. D. McBain * Andrew McCluskey + * Nicholas McKibben * Sturla Molden * Denali Molitor + * Eric Moore * Shashaank N + * Prashanth Nadukandi + * nbelakovski + * Andrew Nelson * Nick + * Nikola Forró + * odidev * ofirr + * Sambit Panda * Dima Pasechnik * Tirth Patel + * Paweł Redzyński + * Vladimir Philipenko + * Philipp Thölke + * Ilhan Polat * Eugene Prilepin + * Vladyslav Rachek * Ram Rachum + * Tyler Reddy * Martin Reinecke + * Simon Segerblom Rex + * Lucas Roberts * Benjamin Rowell + * Eli Rykoff + * Atsushi Sakai * Moritz Schulte + * Daniel B. Smith * Steve Smith + * Jan Soedingrekso + * Victor Stinner + * Jose Storopoli + * Diana Sukhoverkhova + * Søren Fuglede Jørgensen * taoky + * Mike Taves + * Ian Thomas + * Will Tirone + * Frank Torres + * Seth Troisi * Ronald van Elburg + * Hugo van Kemenade * Paul van Mulbregt * Saul Ivan Rivas Vega + * Pauli Virtanen * Jan Vleeshouwers * Samuel Wallan * Warren Weckesser * Ben West + * Eric Wieser * WillTirone + * Levi John Wolf + * Zhiqing Xiao * Rory Yorke + * Yun Wang (Maigo) + * Egor Zemlyanoy + * ZhihuiChen0903 + * Jacob Zhong + A total of 121 people contributed to this release. People with a "+" by their names contributed a patch for the first time. This list of names is automatically generated, and may not be fully complete. Issues closed for 1.6.0 ------------------------------- * `#1323 <https://github.com/scipy/scipy/issues/1323>`__: ndimage.shift destroys data from edges (Trac #796) * `#1892 <https://github.com/scipy/scipy/issues/1892>`__: using rptfile= with an existing file causes a Fortran runtime... * `#1903 <https://github.com/scipy/scipy/issues/1903>`__: ndimage.rotate misses some values (Trac #1378) * `#1930 <https://github.com/scipy/scipy/issues/1930>`__: scipy.io.wavfile should be able to read 24 bit signed wave (Trac... * `#3158 <https://github.com/scipy/scipy/issues/3158>`__: Odd casting behaviour of signal.filtfilt * `#3203 <https://github.com/scipy/scipy/issues/3203>`__: interpolation.zoom incorrect output for certain cases * `#3645 <https://github.com/scipy/scipy/issues/3645>`__: BUG: stats: mstats.pearsonr calculation is wrong if the masks... * `#3665 <https://github.com/scipy/scipy/issues/3665>`__: Return Bunch objects from stats functions * `#4922 <https://github.com/scipy/scipy/issues/4922>`__: unexpected zero output values from zoom * `#5202 <https://github.com/scipy/scipy/issues/5202>`__: BUG: stats: Spurious warnings from the pdf method of several... * `#5223 <https://github.com/scipy/scipy/issues/5223>`__: Zoom does not return the same values when resizing a sub-array... * `#5396 <https://github.com/scipy/scipy/issues/5396>`__: scipy.spatial.distance.pdist documention bug * `#5489 <https://github.com/scipy/scipy/issues/5489>`__: ValueError: failed to create intent(cache|hide)|optional array--... * `#6096 <https://github.com/scipy/scipy/issues/6096>`__: loadmat drops dtype of empty arrays when squeeze_me=True * `#6713 <https://github.com/scipy/scipy/issues/6713>`__: sicpy.ndimage.zoom returns artefacts and boundaries in some cases * `#7125 <https://github.com/scipy/scipy/issues/7125>`__: Impossible to know number of dimensions in c function used by... * `#7324 <https://github.com/scipy/scipy/issues/7324>`__: scipy.ndimage.zoom bad interpolation when downsampling (zoom... * `#8131 <https://github.com/scipy/scipy/issues/8131>`__: BUG: geometric_transform wrap mode possible bug * `#8163 <https://github.com/scipy/scipy/issues/8163>`__: LSMR fails on some random values when providing an x0 * `#8210 <https://github.com/scipy/scipy/issues/8210>`__: Why should I choose order > 1 for scipy.ndimage.zoom? * `#8465 <https://github.com/scipy/scipy/issues/8465>`__: Unexpected behavior with reflect mode of ndimage.rotate * `#8776 <https://github.com/scipy/scipy/issues/8776>`__: cdist behavior with Minkowsky and np.inf * `#9168 <https://github.com/scipy/scipy/issues/9168>`__: documentation of pearson3 in scipy.stats unclear * `#9223 <https://github.com/scipy/scipy/issues/9223>`__: Faster implementation of scipy.sparse.block_diag * `#9476 <https://github.com/scipy/scipy/issues/9476>`__: Invalid index in signal.medfilt2d's QUICK_SELECT * `#9857 <https://github.com/scipy/scipy/issues/9857>`__: scipy.odr.Output.sd_beta is not standard error * `#9865 <https://github.com/scipy/scipy/issues/9865>`__: Strange behavior of \`ndimage.shift\` and \`ndimage.affine_transform\` * `#10042 <https://github.com/scipy/scipy/issues/10042>`__: Consider support for multivariate student-t distribution? * `#10134 <https://github.com/scipy/scipy/issues/10134>`__: gausshyper distribution accepts invalid parameters * `#10179 <https://github.com/scipy/scipy/issues/10179>`__: str+bytes concatenation error in test_lapack.py * `#10216 <https://github.com/scipy/scipy/issues/10216>`__: cKDTree.query_ball_point speed regression * `#10463 <https://github.com/scipy/scipy/issues/10463>`__: ENH: vectorize scipy.fft for more CPU architectures * `#10593 <https://github.com/scipy/scipy/issues/10593>`__: Rename \`sum\` ndimage function * `#10595 <https://github.com/scipy/scipy/issues/10595>`__: scipy.stats.ttest_1samp should support alternative hypothesis * `#10610 <https://github.com/scipy/scipy/issues/10610>`__: ndimage.interpolation.spline_filter1d default value of mode * `#10620 <https://github.com/scipy/scipy/issues/10620>`__: ndimage.interpolation.zoom() option to work like skimage.transform.resize() * `#10711 <https://github.com/scipy/scipy/issues/10711>`__: Array Shapes Not Aligned Bug in scipy.optimize._lsq.lsq_linear.py * `#10782 <https://github.com/scipy/scipy/issues/10782>`__: BUG: optimize: methods unknown to \`scipy.optimize.show_options\` * `#10892 <https://github.com/scipy/scipy/issues/10892>`__: Possible typo in an equation of optimize/dual_annealing * `#11020 <https://github.com/scipy/scipy/issues/11020>`__: signal.fftconvolve return a tuple including lag information * `#11093 <https://github.com/scipy/scipy/issues/11093>`__: scipy.interpolate.interp1d can not handle datetime64 * `#11170 <https://github.com/scipy/scipy/issues/11170>`__: Use manylinux2014 to get aarch64/ppc64le support * `#11186 <https://github.com/scipy/scipy/issues/11186>`__: BUG: stats: pearson3 CDF and SF functions incorrect when skew... * `#11366 <https://github.com/scipy/scipy/issues/11366>`__: DeprecationWarning due to invalid escape sequences * `#11403 <https://github.com/scipy/scipy/issues/11403>`__: Optimize raises "ValueError: \`x0\` violates bound constraints"... * `#11558 <https://github.com/scipy/scipy/issues/11558>`__: ENH: IIR comb filter * `#11559 <https://github.com/scipy/scipy/issues/11559>`__: BUG: iirdesign doesn't fail for frequencies above Nyquist * `#11567 <https://github.com/scipy/scipy/issues/11567>`__: scipy.signal.iirdesign doesn't check consistency of wp and ws... * `#11654 <https://github.com/scipy/scipy/issues/11654>`__: ENH: Add Negative Hypergeometric Distribution * `#11720 <https://github.com/scipy/scipy/issues/11720>`__: BUG: stats: wrong shape from median_absolute_deviation for arrays... * `#11746 <https://github.com/scipy/scipy/issues/11746>`__: BUG: stats: pearson3 returns size 1 arrays where other distributions... * `#11756 <https://github.com/scipy/scipy/issues/11756>`__: Improve and fix \*Spline docstrings and code * `#11758 <https://github.com/scipy/scipy/issues/11758>`__: BUG: of scipy.interpolate.CubicSpline when \`bc_type' is set... * `#11925 <https://github.com/scipy/scipy/issues/11925>`__: MAINT: remove character encoding check in CI? * `#11963 <https://github.com/scipy/scipy/issues/11963>`__: Test failures - TestLinprogIPSparseCholmod * `#12102 <https://github.com/scipy/scipy/issues/12102>`__: incorrect first moment of non central t-distribution * `#12113 <https://github.com/scipy/scipy/issues/12113>`__: scipy.stats.poisson docs for rate = 0 * `#12152 <https://github.com/scipy/scipy/issues/12152>`__: ENH: signal.gauss_spline should accept a list * `#12157 <https://github.com/scipy/scipy/issues/12157>`__: BUG: Iteration index initialisation is wrong in scipy.optimize.linesearch.scalar_search_wolfe2 * `#12162 <https://github.com/scipy/scipy/issues/12162>`__: Storing Rotation object in NumPy array returns an array with... * `#12176 <https://github.com/scipy/scipy/issues/12176>`__: cannot modify the slice of an array returned by \`wavfile.read\` * `#12190 <https://github.com/scipy/scipy/issues/12190>`__: retrieve leave colors from dendrogram * `#12196 <https://github.com/scipy/scipy/issues/12196>`__: PERF: scipy.linalg.pinv is very slow compared to numpy.linalg.pinv * `#12222 <https://github.com/scipy/scipy/issues/12222>`__: Interpolating categorical data (interp1d) * `#12231 <https://github.com/scipy/scipy/issues/12231>`__: Is the p-value of the Kruskal-Wallis test two-sided? * `#12249 <https://github.com/scipy/scipy/issues/12249>`__: ENH: least_squares: should not re-instanciate csr_matrix if already... * `#12264 <https://github.com/scipy/scipy/issues/12264>`__: DOC: optimize: linprog method-specific function signature * `#12290 <https://github.com/scipy/scipy/issues/12290>`__: DOC: Convex Hull areas are actually perimeters for 2-dimensional... * `#12308 <https://github.com/scipy/scipy/issues/12308>`__: integrate.solve_ivp with DOP853 method fails when yDot = 0 * `#12326 <https://github.com/scipy/scipy/issues/12326>`__: BUG: stats.exponnorm.pdf returns 0 for small K * `#12337 <https://github.com/scipy/scipy/issues/12337>`__: scipy.sparse.linalg.eigsh documentation is misleading * `#12339 <https://github.com/scipy/scipy/issues/12339>`__: scipy.io.wavfile.write documentation has wrong example * `#12340 <https://github.com/scipy/scipy/issues/12340>`__: sparse.lil_matrix.tocsr() fails silently on matrices with nzn... * `#12350 <https://github.com/scipy/scipy/issues/12350>`__: Create a 2-parameter version of the gamma distribution * `#12369 <https://github.com/scipy/scipy/issues/12369>`__: scipy.signal.correlate has an error in the documentation, examples... * `#12373 <https://github.com/scipy/scipy/issues/12373>`__: interp1d returns incorrect values for step functions * `#12378 <https://github.com/scipy/scipy/issues/12378>`__: interpolate.NearestNDInterpolator.__call__ & LinearNDInterpolator.__call__... * `#12411 <https://github.com/scipy/scipy/issues/12411>`__: scipy.stats.spearmanr mishandles nan variables with "propogate" * `#12413 <https://github.com/scipy/scipy/issues/12413>`__: DOC: Remove the "Basic functions" section from the SciPy tutorial. * `#12415 <https://github.com/scipy/scipy/issues/12415>`__: scipy.stats.dirichlet documentation issue * `#12419 <https://github.com/scipy/scipy/issues/12419>`__: least_squares ValueError with 'lm' method - regression from 1.4.1... * `#12431 <https://github.com/scipy/scipy/issues/12431>`__: Request for Python wrapper for LAPACK's ?pptrf (Cholesky factorization... * `#12458 <https://github.com/scipy/scipy/issues/12458>`__: spearmanr with entire NaN columns produces errors * `#12477 <https://github.com/scipy/scipy/issues/12477>`__: WIP: Addition of MLE for stats.invgauss/wald * `#12483 <https://github.com/scipy/scipy/issues/12483>`__: reading .wav fails when the file is too big on python 3.6.0 * `#12490 <https://github.com/scipy/scipy/issues/12490>`__: BUG: stats: logistic and genlogistic logpdf overflow for large... * `#12499 <https://github.com/scipy/scipy/issues/12499>`__: LinearNDInterpolator raises ValueError when value array has writeable=False... * `#12523 <https://github.com/scipy/scipy/issues/12523>`__: Wrong key in __odrpack.c * `#12547 <https://github.com/scipy/scipy/issues/12547>`__: typo in scipy/cluster/_hierarchy.pyx * `#12549 <https://github.com/scipy/scipy/issues/12549>`__: DOC: least_squares return type is poorly formatted. * `#12578 <https://github.com/scipy/scipy/issues/12578>`__: TST: test_bounds_infeasible_2 failing on wheels repo cron jobs * `#12585 <https://github.com/scipy/scipy/issues/12585>`__: ENH: Add Multivariate Hypergeometric Distribution * `#12604 <https://github.com/scipy/scipy/issues/12604>`__: unintuitive conversion in \`scipy.constants.lambda2nu\` * `#12606 <https://github.com/scipy/scipy/issues/12606>`__: DOC: Invalid syntax in example. * `#12665 <https://github.com/scipy/scipy/issues/12665>`__: List of possible bugs found by automated code analysis * `#12696 <https://github.com/scipy/scipy/issues/12696>`__: scipy.optimize.fminbound, numpy depreciation warning Creating... * `#12699 <https://github.com/scipy/scipy/issues/12699>`__: TestProjections.test_iterative_refinements_dense failure * `#12701 <https://github.com/scipy/scipy/issues/12701>`__: TestDifferentialEvolutionSolver::test_L4 failing * `#12719 <https://github.com/scipy/scipy/issues/12719>`__: Misleading scipy.signal.get_window() docstring with 'exponential'... * `#12740 <https://github.com/scipy/scipy/issues/12740>`__: circstd doesn't handle R = hypot(S, C) > 1 * `#12749 <https://github.com/scipy/scipy/issues/12749>`__: ENH: interp1d Matlab compatibility * `#12773 <https://github.com/scipy/scipy/issues/12773>`__: Meta-issue: ndimage spline boundary handling (NumFOCUS proposal) * `#12813 <https://github.com/scipy/scipy/issues/12813>`__: optimize.root(method="krylov") fails if options["tol_norm"] expects... * `#12815 <https://github.com/scipy/scipy/issues/12815>`__: stats.zscore inconsistent behavior when all values are the same * `#12840 <https://github.com/scipy/scipy/issues/12840>`__: scipy.signal.windows.dpss docstring typo * `#12874 <https://github.com/scipy/scipy/issues/12874>`__: Rotation.random vs stats.special_ortho_group * `#12881 <https://github.com/scipy/scipy/issues/12881>`__: FFT - documentation - examples - linspace construction * `#12904 <https://github.com/scipy/scipy/issues/12904>`__: BUG: parsing in loadarff() * `#12917 <https://github.com/scipy/scipy/issues/12917>`__: GitHub Actions nightly build triggered on forks * `#12919 <https://github.com/scipy/scipy/issues/12919>`__: BUG: numerical precision, use gammaln in nct.mean * `#12924 <https://github.com/scipy/scipy/issues/12924>`__: Rename Sample Based Integration Methods to Comply with Code of... * `#12940 <https://github.com/scipy/scipy/issues/12940>`__: Should the minimum numpy for AIX be bumped to 1.16.5 * `#12951 <https://github.com/scipy/scipy/issues/12951>`__: A possible typo in scipy.stats.weightedtau * `#12952 <https://github.com/scipy/scipy/issues/12952>`__: [Documentation question] Would it be more precise to specify... * `#12970 <https://github.com/scipy/scipy/issues/12970>`__: Documentation presents second order sections as the correct choice... * `#12982 <https://github.com/scipy/scipy/issues/12982>`__: Calculate standard error of the intercept in linregress * `#12985 <https://github.com/scipy/scipy/issues/12985>`__: Possible wrong link in scipy.stats.wilcoxon doc * `#12991 <https://github.com/scipy/scipy/issues/12991>`__: least_squares broken with float32 * `#13001 <https://github.com/scipy/scipy/issues/13001>`__: \`OptimizeResult.message\` from \`L-BFGS-B\` is a bytes, not... * `#13030 <https://github.com/scipy/scipy/issues/13030>`__: BUG: lint_diff.py still fails for backport PRs * `#13077 <https://github.com/scipy/scipy/issues/13077>`__: CI: codecov proper patch diffs * `#13085 <https://github.com/scipy/scipy/issues/13085>`__: Build failing on main branch after HiGHS solver merge * `#13088 <https://github.com/scipy/scipy/issues/13088>`__: BLD, BUG: wheel builds failure with HiGHS/optimize * `#13099 <https://github.com/scipy/scipy/issues/13099>`__: Wrong output format for empty sparse results of kron * `#13108 <https://github.com/scipy/scipy/issues/13108>`__: TST, CI: GitHub Actions MacOS Failures * `#13111 <https://github.com/scipy/scipy/issues/13111>`__: BUG, DOC: refguide check is failing * `#13127 <https://github.com/scipy/scipy/issues/13127>`__: ODR output file writing broken in conda env with system compilers * `#13134 <https://github.com/scipy/scipy/issues/13134>`__: FromTravis migration tracker * `#13140 <https://github.com/scipy/scipy/issues/13140>`__: BUG: signal: \`ss2tf\` incorrectly truncates output to integers. * `#13179 <https://github.com/scipy/scipy/issues/13179>`__: CI: lint is failing because of output to stderr * `#13182 <https://github.com/scipy/scipy/issues/13182>`__: Key appears twice in \`test_optimize.test_show_options\` * `#13191 <https://github.com/scipy/scipy/issues/13191>`__: \`scipy.linalg.lapack.dgesjv\` overwrites original arrays if... * `#13207 <https://github.com/scipy/scipy/issues/13207>`__: TST: Erratic test failure in test_cossin_separate Pull requests for 1.6.0 ------------------------------ * `#8032 <https://github.com/scipy/scipy/pull/8032>`__: ENH: Add in taylor window common in Radar processing * `#8779 <https://github.com/scipy/scipy/pull/8779>`__: CI: Run benchmarks * `#9361 <https://github.com/scipy/scipy/pull/9361>`__: ENH: Add Kendall's tau-a and tau-c variants to scipy.stats.kendalltau() * `#11068 <https://github.com/scipy/scipy/pull/11068>`__: ENH: Adds correlation_lags function to scipy.signal * `#11119 <https://github.com/scipy/scipy/pull/11119>`__: ENH: add Cramer-von-Mises (one-sample) test to scipy.stats * `#11249 <https://github.com/scipy/scipy/pull/11249>`__: ENH: optimize: interpolative decomposition redundancy removal... * `#11346 <https://github.com/scipy/scipy/pull/11346>`__: ENH: add fast toeplitz matrix multiplication using FFT * `#11413 <https://github.com/scipy/scipy/pull/11413>`__: ENH: Multivariate t-distribution (stale) * `#11563 <https://github.com/scipy/scipy/pull/11563>`__: ENH: exact p-value in stats.kendalltau() for sample sizes > 171 * `#11691 <https://github.com/scipy/scipy/pull/11691>`__: ENH: add a stack of reversal functions to linprog * `#12043 <https://github.com/scipy/scipy/pull/12043>`__: ENH: optimize: add HiGHS methods to linprog - continued * `#12061 <https://github.com/scipy/scipy/pull/12061>`__: Check parameter consistensy in signal.iirdesign * `#12067 <https://github.com/scipy/scipy/pull/12067>`__: MAINT: Cleanup OLDAPI in ndimage/src/_ctest.c * `#12069 <https://github.com/scipy/scipy/pull/12069>`__: DOC: Add developer guidelines for implementing the nan_policy... * `#12077 <https://github.com/scipy/scipy/pull/12077>`__: MAINT: malloc return value checks for cython * `#12080 <https://github.com/scipy/scipy/pull/12080>`__: MAINT: Remove suppress_warnings * `#12085 <https://github.com/scipy/scipy/pull/12085>`__: ENH: special: support ILP64 Lapack * `#12086 <https://github.com/scipy/scipy/pull/12086>`__: MAINT: Cleanup PyMODINIT_FUNC used during 2to3 * `#12097 <https://github.com/scipy/scipy/pull/12097>`__: ENH: stats: override stats.rayleigh.fit with analytical MLE * `#12112 <https://github.com/scipy/scipy/pull/12112>`__: DOC: Improve integrate.nquad docstring * `#12125 <https://github.com/scipy/scipy/pull/12125>`__: TST: Add a test for stats.gmean with negative input * `#12139 <https://github.com/scipy/scipy/pull/12139>`__: TST: Reduce flakiness in lsmr test * `#12142 <https://github.com/scipy/scipy/pull/12142>`__: DOC: add a note in poisson distribution when mu=0 and k=0 in... * `#12144 <https://github.com/scipy/scipy/pull/12144>`__: DOC: Update ndimage.morphology.distance_transform\* * `#12154 <https://github.com/scipy/scipy/pull/12154>`__: ENH: scipy.signal: allow lists in gauss_spline * `#12170 <https://github.com/scipy/scipy/pull/12170>`__: ENH: scipy.stats: add negative hypergeometric distribution * `#12177 <https://github.com/scipy/scipy/pull/12177>`__: MAINT: Correctly add input line to ValueError * `#12183 <https://github.com/scipy/scipy/pull/12183>`__: ENH: Use fromfile where possible * `#12186 <https://github.com/scipy/scipy/pull/12186>`__: MAINT: generalize tests in SphericalVoronoi * `#12198 <https://github.com/scipy/scipy/pull/12198>`__: TST: Fix str + bytes error * `#12199 <https://github.com/scipy/scipy/pull/12199>`__: ENH: match np.result_type behaviour in some scipy.signal functions * `#12200 <https://github.com/scipy/scipy/pull/12200>`__: ENH: add FIR and IIR gammatone filters to scipy.signal * `#12204 <https://github.com/scipy/scipy/pull/12204>`__: ENH: Add overwrite argument for odr.ODR() and its test. * `#12206 <https://github.com/scipy/scipy/pull/12206>`__: MAINT:lstsq: Switch to tranposed problem if the array is tall * `#12208 <https://github.com/scipy/scipy/pull/12208>`__: wavfile bugfixes and maintenance * `#12214 <https://github.com/scipy/scipy/pull/12214>`__: DOC: fix docstring of "sd_beta" of odr.Output. * `#12234 <https://github.com/scipy/scipy/pull/12234>`__: MAINT: prevent divide by zero warnings in scipy.optimize BFGS... * `#12235 <https://github.com/scipy/scipy/pull/12235>`__: REL: set version to 1.6.0.dev0 * `#12237 <https://github.com/scipy/scipy/pull/12237>`__: BUG: Fix exit condition for QUICK_SELECT pivot * `#12242 <https://github.com/scipy/scipy/pull/12242>`__: ENH: Rename ndimage.sum to ndimage.sum_labels (keep sum as alias) * `#12243 <https://github.com/scipy/scipy/pull/12243>`__: EHN: Update SuperLU * `#12244 <https://github.com/scipy/scipy/pull/12244>`__: MAINT: stats: avoid spurious warnings in ncx2.pdf * `#12245 <https://github.com/scipy/scipy/pull/12245>`__: DOC: Fixed incorrect default for mode in scipy.ndimage.spline_filter1d * `#12248 <https://github.com/scipy/scipy/pull/12248>`__: MAINT: clean up pavement.py * `#12250 <https://github.com/scipy/scipy/pull/12250>`__: ENH: Replaced csr_matrix() by tocsr() and complemented docstring * `#12253 <https://github.com/scipy/scipy/pull/12253>`__: TST, CI: turn on codecov patch diffs * `#12259 <https://github.com/scipy/scipy/pull/12259>`__: MAINT: Remove duplicated test for import cycles * `#12263 <https://github.com/scipy/scipy/pull/12263>`__: ENH: Rename LocalSearchWrapper bounds * `#12265 <https://github.com/scipy/scipy/pull/12265>`__: BUG optimize: Accept np.matrix in lsq_linear * `#12266 <https://github.com/scipy/scipy/pull/12266>`__: BUG: Fix paren error in dual annealing accept_reject calculation * `#12269 <https://github.com/scipy/scipy/pull/12269>`__: MAINT: Included mismatched shapes in error messages. * `#12279 <https://github.com/scipy/scipy/pull/12279>`__: MAINT: \`__array__\` and array protocols cannot be used in sparse. * `#12281 <https://github.com/scipy/scipy/pull/12281>`__: DOC: update wheel DL docs * `#12283 <https://github.com/scipy/scipy/pull/12283>`__: ENH: odr: ILP64 Blas support in ODR * `#12284 <https://github.com/scipy/scipy/pull/12284>`__: ENH: linalg: support for ILP64 BLAS/LAPACK in f2py wrappers * `#12286 <https://github.com/scipy/scipy/pull/12286>`__: ENH: Cythonize scipy.spatial.transform.Rotation * `#12287 <https://github.com/scipy/scipy/pull/12287>`__: ENH: Read arbitrary bit depth (including 24-bit) WAVs * `#12292 <https://github.com/scipy/scipy/pull/12292>`__: BLD: fix musl compilation * `#12293 <https://github.com/scipy/scipy/pull/12293>`__: MAINT: Fix a DeprecationWarning in validate_runtests_log.py. * `#12296 <https://github.com/scipy/scipy/pull/12296>`__: DOC: Clarify area/volume in scipy.spatial.ConvexHull docstrings * `#12302 <https://github.com/scipy/scipy/pull/12302>`__: CI: Run travis builds on master to keep cache up to date * `#12305 <https://github.com/scipy/scipy/pull/12305>`__: TST: Cleanup print statements in tests * `#12323 <https://github.com/scipy/scipy/pull/12323>`__: ENH: Add a Bunch-like class to use as a backwards compatible... * `#12324 <https://github.com/scipy/scipy/pull/12324>`__: BUG: io: Fix an error that occurs when attempting to raise a... * `#12327 <https://github.com/scipy/scipy/pull/12327>`__: DOC: clarify docstrings of \`query_ball_tree\` and \`query_pairs\` * `#12334 <https://github.com/scipy/scipy/pull/12334>`__: PERF: Improve cKDTree.query_ball_point constant time cython overhead * `#12338 <https://github.com/scipy/scipy/pull/12338>`__: DOC: improve consistency and clarity of docs in linalg and sparse/linalg * `#12341 <https://github.com/scipy/scipy/pull/12341>`__: DOC: add Examples for KDTree query_ball_tree and query_pairs * `#12343 <https://github.com/scipy/scipy/pull/12343>`__: DOC: add examples for special.eval_legendre() * `#12349 <https://github.com/scipy/scipy/pull/12349>`__: BUG: avoid overflow in sum() for 32-bit systems * `#12351 <https://github.com/scipy/scipy/pull/12351>`__: DOC: Fix example wavfile to be 16bit * `#12352 <https://github.com/scipy/scipy/pull/12352>`__: [BUG] Consider 0/0 division in DOP853 error estimation * `#12353 <https://github.com/scipy/scipy/pull/12353>`__: Fix exception causes in vq.py * `#12354 <https://github.com/scipy/scipy/pull/12354>`__: MAINT: Cleanup unneeded void\* cast in setlist.pxd * `#12355 <https://github.com/scipy/scipy/pull/12355>`__: TST: Remove hack for old win-amd64 bug * `#12356 <https://github.com/scipy/scipy/pull/12356>`__: ENH: Faster implementation of scipy.sparse.block_diag (#9411... * `#12357 <https://github.com/scipy/scipy/pull/12357>`__: MAINT,TST: update and run scipy/special/utils/convert.py * `#12358 <https://github.com/scipy/scipy/pull/12358>`__: TST: Check mstat.skewtest pvalue * `#12359 <https://github.com/scipy/scipy/pull/12359>`__: TST: Sparse matrix test with int64 indptr and indices * `#12363 <https://github.com/scipy/scipy/pull/12363>`__: DOC: ref. in CloughTocher2DInterpolator * `#12364 <https://github.com/scipy/scipy/pull/12364>`__: DOC: \`sparse_distance_matrix\` and \`count_neighbors\` examples * `#12371 <https://github.com/scipy/scipy/pull/12371>`__: MAINT, CI: bump to latest stable OpenBLAS * `#12372 <https://github.com/scipy/scipy/pull/12372>`__: MAINT: Minor cleanup of (c)KDTree tests * `#12374 <https://github.com/scipy/scipy/pull/12374>`__: DEP: Deprecate \`distance.wminkowski\` * `#12375 <https://github.com/scipy/scipy/pull/12375>`__: ENH: Add fast path for minkowski distance with p=1,2 and support... * `#12376 <https://github.com/scipy/scipy/pull/12376>`__: Fix exception causes in most of the codebase * `#12377 <https://github.com/scipy/scipy/pull/12377>`__: DOC: Quick fix - adds newline to correlation_lags docstring Examples... * `#12381 <https://github.com/scipy/scipy/pull/12381>`__: BENCH: remove obsolete goal_time param * `#12382 <https://github.com/scipy/scipy/pull/12382>`__: ENH: Replace KDTree with a thin wrapper over cKDTree * `#12385 <https://github.com/scipy/scipy/pull/12385>`__: DOC: improve docstrings of interpolate.NearestNDInterpolator.__call__... * `#12387 <https://github.com/scipy/scipy/pull/12387>`__: DOC/STY: add example to scipy.signal.correlate * `#12393 <https://github.com/scipy/scipy/pull/12393>`__: CI: Replace the existing check for non-ASCII characters with... * `#12394 <https://github.com/scipy/scipy/pull/12394>`__: CI: arm64 numpy now available * `#12395 <https://github.com/scipy/scipy/pull/12395>`__: ENH: improve stats.binned_statistic_dd performance * `#12396 <https://github.com/scipy/scipy/pull/12396>`__: DOC, MAINT: forward port 1.5.0 relnotes * `#12398 <https://github.com/scipy/scipy/pull/12398>`__: API: Disable len() and indexing of Rotation instances with single... * `#12399 <https://github.com/scipy/scipy/pull/12399>`__: MAINT: Replace some Unicode dash-like chars with an ASCII hyphen. * `#12402 <https://github.com/scipy/scipy/pull/12402>`__: update .mailmap * `#12404 <https://github.com/scipy/scipy/pull/12404>`__: MAINT: io: Change the encoding comment of test_mio.py to utf-8. * `#12416 <https://github.com/scipy/scipy/pull/12416>`__: CI: cache mingw, azure pipelines * `#12427 <https://github.com/scipy/scipy/pull/12427>`__: BUG: logic error in loop unrolling (cKDTree) * `#12432 <https://github.com/scipy/scipy/pull/12432>`__: DOC: Remove the "Basic functions" section from the SciPy tutorial. * `#12434 <https://github.com/scipy/scipy/pull/12434>`__: ENH:linalg: Add LAPACK wrappers pptrf/pptrs/ppsv/pptri/ppcon * `#12435 <https://github.com/scipy/scipy/pull/12435>`__: DOC: fix simplex math for scipy.stats.dirichlet documentation * `#12439 <https://github.com/scipy/scipy/pull/12439>`__: DOC: add API methods summary for NdPPoly * `#12443 <https://github.com/scipy/scipy/pull/12443>`__: BUG: stats: Improve calculation of exponnorm.pdf * `#12448 <https://github.com/scipy/scipy/pull/12448>`__: DOC: stats: Add "Examples" to the ansari docstring. * `#12450 <https://github.com/scipy/scipy/pull/12450>`__: ENH: add \`leaves_color_list\` for cluster.dendrogram dictionary. * `#12451 <https://github.com/scipy/scipy/pull/12451>`__: MAINT: remove "blacklist" terminology from code base * `#12452 <https://github.com/scipy/scipy/pull/12452>`__: DOC: clarify the meaning of whitening for cluster.vq.whiten() * `#12455 <https://github.com/scipy/scipy/pull/12455>`__: MAINT: clearer error message in setup.py * `#12457 <https://github.com/scipy/scipy/pull/12457>`__: ENH: stats: override stats.pareto.fit with analytical MLE * `#12460 <https://github.com/scipy/scipy/pull/12460>`__: check if column in spearman rho is entirely NaN or Inf * `#12463 <https://github.com/scipy/scipy/pull/12463>`__: DOC: improve and clean up \*Spline docstrings in fitpack2.py * `#12474 <https://github.com/scipy/scipy/pull/12474>`__: ENH: linalg: speedup _sqrtm_triu by moving tight loop to Cython * `#12476 <https://github.com/scipy/scipy/pull/12476>`__: ENH: add IIR comb filter to scipy.signal * `#12484 <https://github.com/scipy/scipy/pull/12484>`__: Fix documentation for minimize * `#12486 <https://github.com/scipy/scipy/pull/12486>`__: DOC: add a note in poisson distribution when mu=0 and k=0 in... * `#12491 <https://github.com/scipy/scipy/pull/12491>`__: MAINT: forward port 1.5.1 release notes * `#12508 <https://github.com/scipy/scipy/pull/12508>`__: Fix exception causes all over the codebase * `#12514 <https://github.com/scipy/scipy/pull/12514>`__: ENH: stats: override stats.invgauss.fit with analytical MLE * `#12519 <https://github.com/scipy/scipy/pull/12519>`__: PERF: Avoid np.zeros when custom initialization is needed anyway * `#12520 <https://github.com/scipy/scipy/pull/12520>`__: DOC: Minor RST section renaming. * `#12521 <https://github.com/scipy/scipy/pull/12521>`__: MAINT: Remove unused imports * `#12522 <https://github.com/scipy/scipy/pull/12522>`__: PERF: Get rid of unnececssary allocation in VarReader5.cread_fieldnames * `#12524 <https://github.com/scipy/scipy/pull/12524>`__: DOC: special: Set Axes3D rect to avoid clipping labels in plot. * `#12525 <https://github.com/scipy/scipy/pull/12525>`__: Fix large sparse nnz * `#12526 <https://github.com/scipy/scipy/pull/12526>`__: DOC: Remove double section and too long header underline. * `#12527 <https://github.com/scipy/scipy/pull/12527>`__: Improve error message for wrong interpolation type * `#12530 <https://github.com/scipy/scipy/pull/12530>`__: Move redundant logic outside loop for conditional speedup in... * `#12532 <https://github.com/scipy/scipy/pull/12532>`__: ENH: Add norm={"forward", "backward"} to \`scipy.fft\` * `#12535 <https://github.com/scipy/scipy/pull/12535>`__: MAINT: Avoid sphinx deprecated aliases for SeeAlso and Only * `#12540 <https://github.com/scipy/scipy/pull/12540>`__: BUG: fix odr.output.work_ind key bug and add its test. * `#12541 <https://github.com/scipy/scipy/pull/12541>`__: ENH: add solver for minimum weight full bipartite matching * `#12550 <https://github.com/scipy/scipy/pull/12550>`__: PERF: pickling speed of rv\* * `#12551 <https://github.com/scipy/scipy/pull/12551>`__: DOC: fix typo in cluster/_hierarchy.pyx * `#12552 <https://github.com/scipy/scipy/pull/12552>`__: CI: Cleanup travis pip installs * `#12556 <https://github.com/scipy/scipy/pull/12556>`__: BUG: Fix problem with Scipy.integrate.solve_bvp for big problems * `#12557 <https://github.com/scipy/scipy/pull/12557>`__: MAINT: Use extern templates to improve sparsetools compile time * `#12558 <https://github.com/scipy/scipy/pull/12558>`__: MAINT: Remove hack to allow scipy.fft to act like a function * `#12563 <https://github.com/scipy/scipy/pull/12563>`__: MAINT: Remove unused mu0 in special/orthogonal.py * `#12564 <https://github.com/scipy/scipy/pull/12564>`__: DOC: fix return type docstring for least_squares * `#12565 <https://github.com/scipy/scipy/pull/12565>`__: DOC: stats: respond to query about Kruskal-Wallis test being... * `#12566 <https://github.com/scipy/scipy/pull/12566>`__: BUG: Interpolate: use stable sort * `#12568 <https://github.com/scipy/scipy/pull/12568>`__: Updated documentation for as_quat * `#12571 <https://github.com/scipy/scipy/pull/12571>`__: DEP: remove deprecated slepian window * `#12573 <https://github.com/scipy/scipy/pull/12573>`__: DEP: remove \`frechet_l\` and \`frechet_r\` * `#12575 <https://github.com/scipy/scipy/pull/12575>`__: BUG: stats: fix multinomial.pmf NaNs when params sum > 1 * `#12576 <https://github.com/scipy/scipy/pull/12576>`__: MAINT: remove warning from LSQSphereBivariateSpline * `#12582 <https://github.com/scipy/scipy/pull/12582>`__: ENH: Multivariate t-distribution * `#12587 <https://github.com/scipy/scipy/pull/12587>`__: ENH: speed up rvs of gengamma in scipy.stats * `#12588 <https://github.com/scipy/scipy/pull/12588>`__: DOC: add Examples add see also sections for LinearNDInterpolator,... * `#12597 <https://github.com/scipy/scipy/pull/12597>`__: ENH: Add single-sided p-values to t-tests * `#12599 <https://github.com/scipy/scipy/pull/12599>`__: Small update to scipy FFT tutorial * `#12600 <https://github.com/scipy/scipy/pull/12600>`__: ENH: disjoint set data structure * `#12602 <https://github.com/scipy/scipy/pull/12602>`__: BUG: add const for Read-only views in interpnd.pyx * `#12605 <https://github.com/scipy/scipy/pull/12605>`__: BUG: correct \`np.asanyarray\` use in \`scipy.constants.lambda2nu\` * `#12610 <https://github.com/scipy/scipy/pull/12610>`__: MAINT: forward port 1.5.2 release notes * `#12612 <https://github.com/scipy/scipy/pull/12612>`__: MAINT: stats: Use explicit keyword parameters instead of \`\*\*kwds\`. * `#12616 <https://github.com/scipy/scipy/pull/12616>`__: DOC: make explicit docstring that interpolate.interp1d only accepts... * `#12618 <https://github.com/scipy/scipy/pull/12618>`__: DOC: Minor doc formatting. * `#12640 <https://github.com/scipy/scipy/pull/12640>`__: MAINT: stats: fix issues with scipy.stats.pearson3 docs, moment,... * `#12647 <https://github.com/scipy/scipy/pull/12647>`__: TST: Add Boost ellipr[cdfgj]_data test data * `#12648 <https://github.com/scipy/scipy/pull/12648>`__: DOC: Update special/utils/README with instructions * `#12649 <https://github.com/scipy/scipy/pull/12649>`__: DOC: simplified pip quickstart guide * `#12650 <https://github.com/scipy/scipy/pull/12650>`__: DOC: stats: Fix boxcox docstring: lambda can be negative. * `#12655 <https://github.com/scipy/scipy/pull/12655>`__: DOC: update Steering Council members listed in governance docs * `#12659 <https://github.com/scipy/scipy/pull/12659>`__: rv_sample expect bug * `#12663 <https://github.com/scipy/scipy/pull/12663>`__: DOC: optimize: try to fix linprog method-specific documentation * `#12664 <https://github.com/scipy/scipy/pull/12664>`__: BUG: stats: Fix logpdf with large negative values for logistic... * `#12666 <https://github.com/scipy/scipy/pull/12666>`__: MAINT: Fixes from static analysis * `#12667 <https://github.com/scipy/scipy/pull/12667>`__: ENH: Adding Modified Rodrigues Parameters to the Rotation class * `#12670 <https://github.com/scipy/scipy/pull/12670>`__: DOC: Update documentation for Gamma distribution * `#12673 <https://github.com/scipy/scipy/pull/12673>`__: API: Unconditionally return np.intp from cKDTree.query * `#12677 <https://github.com/scipy/scipy/pull/12677>`__: MAINT: Add Autogenerated notice to ufuncs.pyi * `#12682 <https://github.com/scipy/scipy/pull/12682>`__: MAINT: Remove _util._valarray * `#12688 <https://github.com/scipy/scipy/pull/12688>`__: MAINT: add f2py-generated scipy.integrate files to .gitignore * `#12689 <https://github.com/scipy/scipy/pull/12689>`__: BENCH: simplify benchmark setup, remove benchmarks/run.py * `#12694 <https://github.com/scipy/scipy/pull/12694>`__: scipy/stats: Add laplace_asymmetric continuous distribution * `#12695 <https://github.com/scipy/scipy/pull/12695>`__: DOC: update Ubuntu quickstart; conda compilers now work! * `#12698 <https://github.com/scipy/scipy/pull/12698>`__: MAINT: Replace np.max with np.maximum * `#12700 <https://github.com/scipy/scipy/pull/12700>`__: TST: bump test precision for constrained trustregion test * `#12702 <https://github.com/scipy/scipy/pull/12702>`__: TST: bump test tolerance for \`DifferentialEvolutionSolver.test_L4\` * `#12703 <https://github.com/scipy/scipy/pull/12703>`__: BUG: Improve input validation for sepfir2d * `#12708 <https://github.com/scipy/scipy/pull/12708>`__: MAINT: fix a typo in scipy.sparse * `#12709 <https://github.com/scipy/scipy/pull/12709>`__: BUG: bvls can fail catastrophically to converge * `#12711 <https://github.com/scipy/scipy/pull/12711>`__: MAINT: Use platform.python_implementation to determine IS_PYPY * `#12713 <https://github.com/scipy/scipy/pull/12713>`__: TST: Fix flaky test_lgmres * `#12716 <https://github.com/scipy/scipy/pull/12716>`__: DOC: add examples and tutorial links for interpolate functions... * `#12717 <https://github.com/scipy/scipy/pull/12717>`__: DOC: Fix Issue #5396 * `#12725 <https://github.com/scipy/scipy/pull/12725>`__: ENH: Support complex-valued images and kernels for many ndimage... * `#12729 <https://github.com/scipy/scipy/pull/12729>`__: DEP: remove setup_requires * `#12732 <https://github.com/scipy/scipy/pull/12732>`__: BENCH: skip benchmarks instead of hiding them when SCIPY_XSLOW=0 * `#12734 <https://github.com/scipy/scipy/pull/12734>`__: CI: Don't ignore line-length in the lint_diff check. * `#12736 <https://github.com/scipy/scipy/pull/12736>`__: DOC: Fix signal.windows.get_window() 'exponential' docstring * `#12737 <https://github.com/scipy/scipy/pull/12737>`__: ENH: stats: override stats.gumbel_r.fit and stats.gumbel_l.fit... * `#12738 <https://github.com/scipy/scipy/pull/12738>`__: ENH: stats: override stats.logistic.fit with system of equations... * `#12743 <https://github.com/scipy/scipy/pull/12743>`__: BUG: Avoid negative variances in circular statistics * `#12744 <https://github.com/scipy/scipy/pull/12744>`__: Prevent build error on GNU/Hurd * `#12746 <https://github.com/scipy/scipy/pull/12746>`__: TST: parameterize the test cases in test_ndimage.py * `#12752 <https://github.com/scipy/scipy/pull/12752>`__: DOC: Add examples for some root finding functions. * `#12754 <https://github.com/scipy/scipy/pull/12754>`__: MAINT, CI: Azure windows deps multiline * `#12756 <https://github.com/scipy/scipy/pull/12756>`__: ENH: stats: Add an sf method to levy for improved precision in... * `#12757 <https://github.com/scipy/scipy/pull/12757>`__: ENH: stats: Add an sf method to levy_l for improved precision. * `#12765 <https://github.com/scipy/scipy/pull/12765>`__: TST, MAINT: infeasible_2 context * `#12767 <https://github.com/scipy/scipy/pull/12767>`__: Fix spline interpolation boundary handling for modes reflect... * `#12769 <https://github.com/scipy/scipy/pull/12769>`__: DOC: syntax error in scipy.interpolate.bspl * `#12770 <https://github.com/scipy/scipy/pull/12770>`__: ENH: add nearest-up rounding to scipy.interpolate.interp1d * `#12771 <https://github.com/scipy/scipy/pull/12771>`__: TST: fix invalid input unit test for scipy.signal.gammatone * `#12775 <https://github.com/scipy/scipy/pull/12775>`__: ENH: Adds quadratic_assignment with two methods * `#12776 <https://github.com/scipy/scipy/pull/12776>`__: ENH: add grid-constant boundary handling in ndimage interpolation... * `#12777 <https://github.com/scipy/scipy/pull/12777>`__: Add Taylor Window function - Common in Radar DSP * `#12779 <https://github.com/scipy/scipy/pull/12779>`__: ENH: Improvements to pocketfft thread pool and ARM neon vectorization * `#12788 <https://github.com/scipy/scipy/pull/12788>`__: API: Rename cKDTree n_jobs argument to workers * `#12792 <https://github.com/scipy/scipy/pull/12792>`__: DOC: remove THANKS.txt file in favor of scipy.org * `#12793 <https://github.com/scipy/scipy/pull/12793>`__: Add new flag to authors tool * `#12802 <https://github.com/scipy/scipy/pull/12802>`__: BENCH: add scipy.ndimage.interpolation benchmarks * `#12803 <https://github.com/scipy/scipy/pull/12803>`__: Do not pin the version of numpy in unsupported python versions * `#12810 <https://github.com/scipy/scipy/pull/12810>`__: CI: fix 32-bit Linux build failure on Azure CI runs * `#12812 <https://github.com/scipy/scipy/pull/12812>`__: ENH: support interpolation of complex-valued images * `#12814 <https://github.com/scipy/scipy/pull/12814>`__: BUG: nonlin_solve shouldn't pass non-vector dx to tol_norm * `#12818 <https://github.com/scipy/scipy/pull/12818>`__: Update ckdtree.pyx * `#12822 <https://github.com/scipy/scipy/pull/12822>`__: MAINT: simplify directed_hausdorff * `#12827 <https://github.com/scipy/scipy/pull/12827>`__: DOC: Fix wrong name w being used instead of worN in docs. * `#12831 <https://github.com/scipy/scipy/pull/12831>`__: DOC: fix typo in sparse/base.py * `#12835 <https://github.com/scipy/scipy/pull/12835>`__: MAINT: stats: Improve vonmises PDF calculation. * `#12839 <https://github.com/scipy/scipy/pull/12839>`__: ENH: scipy.stats: add multivariate hypergeometric distribution * `#12843 <https://github.com/scipy/scipy/pull/12843>`__: changed M to N in windows.dpss * `#12846 <https://github.com/scipy/scipy/pull/12846>`__: MAINT: update minimum NumPy version to 1.16.5 * `#12847 <https://github.com/scipy/scipy/pull/12847>`__: DOC: Unify the formula in docs of scipy.stats.pearsonr() * `#12849 <https://github.com/scipy/scipy/pull/12849>`__: DOC: polish QAP docs for consistency and readability * `#12852 <https://github.com/scipy/scipy/pull/12852>`__: ENH, MAINT: Bring KDTree interface to feature-parity with cKDTree * `#12858 <https://github.com/scipy/scipy/pull/12858>`__: DOC: use :doi: and :arxiv: directives for references * `#12872 <https://github.com/scipy/scipy/pull/12872>`__: lazily import multiprocessing.Pool in MapWrapper * `#12878 <https://github.com/scipy/scipy/pull/12878>`__: DOC: document ScalarFunction * `#12882 <https://github.com/scipy/scipy/pull/12882>`__: MAINT: stats: Change a test to use <= instead of strictly less... * `#12885 <https://github.com/scipy/scipy/pull/12885>`__: numpy.linspace calls edited to ensure correct spacing. * `#12886 <https://github.com/scipy/scipy/pull/12886>`__: DOC: stats: Add 'versionadded' to cramervonmises docstring. * `#12899 <https://github.com/scipy/scipy/pull/12899>`__: TST: make a couple of tests expected to fail on 32-bit architectures * `#12903 <https://github.com/scipy/scipy/pull/12903>`__: DOC: update Windows build guide and move into contributor guide * `#12907 <https://github.com/scipy/scipy/pull/12907>`__: DOC: clarify which array the precenter option applies to * `#12908 <https://github.com/scipy/scipy/pull/12908>`__: MAINT: spatial: Remove two occurrences of unused variables in... * `#12909 <https://github.com/scipy/scipy/pull/12909>`__: ENH: stats: Add methods gumbel_r._sf and gumbel_r._isf * `#12910 <https://github.com/scipy/scipy/pull/12910>`__: CI: travis: Remove some unnecessary code from .travis.yml. * `#12911 <https://github.com/scipy/scipy/pull/12911>`__: Minor fixes to dendrogram plotting * `#12921 <https://github.com/scipy/scipy/pull/12921>`__: CI: don't run GitHub Actions on fork or in cron job * `#12927 <https://github.com/scipy/scipy/pull/12927>`__: MAINT: rename integrate.simps to simpson * `#12934 <https://github.com/scipy/scipy/pull/12934>`__: MAINT: rename trapz and cumtrapz to (cumulative\_)trapezoid * `#12936 <https://github.com/scipy/scipy/pull/12936>`__: MAINT: fix numerical precision in nct.stats * `#12938 <https://github.com/scipy/scipy/pull/12938>`__: MAINT: fix linter on master * `#12941 <https://github.com/scipy/scipy/pull/12941>`__: Update minimum AIX pinnings to match non AIX builds * `#12955 <https://github.com/scipy/scipy/pull/12955>`__: BUG: Fixed wrong NaNs check in scipy.stats.weightedtau * `#12958 <https://github.com/scipy/scipy/pull/12958>`__: ENH: stats: Implement _logpdf, _sf and _isf for nakagami. * `#12962 <https://github.com/scipy/scipy/pull/12962>`__: Correcting that p should be in [0,1] for a variety of discrete... * `#12964 <https://github.com/scipy/scipy/pull/12964>`__: BUG: added line.strip() to split_data_line() * `#12968 <https://github.com/scipy/scipy/pull/12968>`__: ENH: stats: Use only an analytical formula or scalar root-finding... * `#12971 <https://github.com/scipy/scipy/pull/12971>`__: MAINT: Declare support for Python 3.9 * `#12972 <https://github.com/scipy/scipy/pull/12972>`__: MAINT: Remove redundant Python < 3.6 code * `#12980 <https://github.com/scipy/scipy/pull/12980>`__: DOC: Update documentation on optimize.rosen * `#12983 <https://github.com/scipy/scipy/pull/12983>`__: ENH: improvements to stats.linregress * `#12990 <https://github.com/scipy/scipy/pull/12990>`__: DOC: Clarify that using sos as output type for iirdesign can... * `#12992 <https://github.com/scipy/scipy/pull/12992>`__: DOC: capitalization and formatting in lsmr * `#12995 <https://github.com/scipy/scipy/pull/12995>`__: DOC: stats: Several documentation fixes. * `#12996 <https://github.com/scipy/scipy/pull/12996>`__: BUG: Improve error messages for \`range\` arg of binned_statistic_dd * `#12998 <https://github.com/scipy/scipy/pull/12998>`__: MAINT: approx_derivative with FP32 closes #12991 * `#13004 <https://github.com/scipy/scipy/pull/13004>`__: TST: isinstance(OptimizeResult.message, str) closes #13001 * `#13006 <https://github.com/scipy/scipy/pull/13006>`__: Keep correct dtype when loading empty mat arrays. * `#13009 <https://github.com/scipy/scipy/pull/13009>`__: MAINT: clip SLSQP step within bounds * `#13012 <https://github.com/scipy/scipy/pull/13012>`__: DOC: fix bilinear_zpk example labels * `#13013 <https://github.com/scipy/scipy/pull/13013>`__: ENH: Add \`subset\` and \`subsets\` methods to \`DisjointSet\`... * `#13029 <https://github.com/scipy/scipy/pull/13029>`__: MAINT: basinhopping callback for initial mininmisation * `#13032 <https://github.com/scipy/scipy/pull/13032>`__: DOC: fix docstring errors in in stats.wilcoxon * `#13036 <https://github.com/scipy/scipy/pull/13036>`__: BUG: forward port lint_diff shims * `#13041 <https://github.com/scipy/scipy/pull/13041>`__: MAINT: dogbox ensure x is within bounds closes #11403 * `#13042 <https://github.com/scipy/scipy/pull/13042>`__: MAINT: forward port 1.5.4 release notes * `#13046 <https://github.com/scipy/scipy/pull/13046>`__: DOC: Update optimize.least_squares doc for all tolerance must... * `#13052 <https://github.com/scipy/scipy/pull/13052>`__: Typo fix for cluster documentation * `#13054 <https://github.com/scipy/scipy/pull/13054>`__: BUG: fix \`scipy.optimize.show_options\` for unknown methods.... * `#13056 <https://github.com/scipy/scipy/pull/13056>`__: MAINT: fft: Fix a C++ compiler warning. * `#13057 <https://github.com/scipy/scipy/pull/13057>`__: Minor fixes on doc of function csr_tocsc * `#13058 <https://github.com/scipy/scipy/pull/13058>`__: DOC: stats: Replace np.float with np.float64 in a tutorial file. * `#13059 <https://github.com/scipy/scipy/pull/13059>`__: DOC: stats: Update the "Returns" section of the linregress docstring. * `#13060 <https://github.com/scipy/scipy/pull/13060>`__: MAINT: clip_x_for_func should be private * `#13061 <https://github.com/scipy/scipy/pull/13061>`__: DOC: signal.win -> signal.windows.win in Examples * `#13063 <https://github.com/scipy/scipy/pull/13063>`__: MAINT: Add suite-sparse and sksparse installation check * `#13070 <https://github.com/scipy/scipy/pull/13070>`__: MAINT: stats: Remove a couple obsolete comments. * `#13073 <https://github.com/scipy/scipy/pull/13073>`__: BUG: Fix scalar_search_wolfe2 to resolve #12157 * `#13078 <https://github.com/scipy/scipy/pull/13078>`__: CI, MAINT: migrate Lint to Azure * `#13081 <https://github.com/scipy/scipy/pull/13081>`__: BLD: drop Python 3.6 support (NEP 29) * `#13082 <https://github.com/scipy/scipy/pull/13082>`__: MAINT: update minimum NumPy version to 1.16.5 in a couple more... * `#13083 <https://github.com/scipy/scipy/pull/13083>`__: DOC: update toolchain.rst * `#13086 <https://github.com/scipy/scipy/pull/13086>`__: DOC: Update the Parameters section of the correlation docstring * `#13087 <https://github.com/scipy/scipy/pull/13087>`__: ENH:signal: Speed-up Cython implementation of _sosfilt * `#13089 <https://github.com/scipy/scipy/pull/13089>`__: BLD, BUG: add c99 compiler flag to HiGHS basiclu library * `#13091 <https://github.com/scipy/scipy/pull/13091>`__: BUG: Fix GIL handling in _sosfilt * `#13094 <https://github.com/scipy/scipy/pull/13094>`__: DOC: clarify "location" in docstring of cKDTree.query * `#13095 <https://github.com/scipy/scipy/pull/13095>`__: Zoom resize update * `#13097 <https://github.com/scipy/scipy/pull/13097>`__: BUG: fix CubicSpline(..., bc_type="periodic") #11758 * `#13100 <https://github.com/scipy/scipy/pull/13100>`__: BUG: sparse: Correct output format of kron * `#13107 <https://github.com/scipy/scipy/pull/13107>`__: ENH: faster linear_sum_assignment for small cost matrices * `#13110 <https://github.com/scipy/scipy/pull/13110>`__: CI, MAINT: refguide/asv checks to azure * `#13112 <https://github.com/scipy/scipy/pull/13112>`__: CI: fix MacOS CI * `#13113 <https://github.com/scipy/scipy/pull/13113>`__: CI: Install word list package for refguide-check * `#13115 <https://github.com/scipy/scipy/pull/13115>`__: BUG: add value range check for signal.iirdesign() * `#13116 <https://github.com/scipy/scipy/pull/13116>`__: CI: Don't report name errors after an exception in refguide-check * `#13117 <https://github.com/scipy/scipy/pull/13117>`__: CI: move sdist/pre-release test Azure * `#13119 <https://github.com/scipy/scipy/pull/13119>`__: Improve error message on friedmanchisquare function * `#13121 <https://github.com/scipy/scipy/pull/13121>`__: Fix factorial() for NaN on Python 3.10 * `#13123 <https://github.com/scipy/scipy/pull/13123>`__: BLD: Specify file extension for language standard version tests * `#13128 <https://github.com/scipy/scipy/pull/13128>`__: TST: skip Fortran I/O test for ODR * `#13130 <https://github.com/scipy/scipy/pull/13130>`__: TST: skip factorial() float tests on Python 3.10 * `#13136 <https://github.com/scipy/scipy/pull/13136>`__: CI:Add python dbg run to GH Actions * `#13138 <https://github.com/scipy/scipy/pull/13138>`__: CI: Port coverage, 64-bit BLAS, GCC 4.8 build to azure * `#13139 <https://github.com/scipy/scipy/pull/13139>`__: Fix edge case for mode='nearest' in ndimage.interpolation functions * `#13141 <https://github.com/scipy/scipy/pull/13141>`__: BUG: signal: Fix data type of the numerator returned by ss2tf. * `#13144 <https://github.com/scipy/scipy/pull/13144>`__: MAINT: stats: restrict gausshyper z > -1 * `#13146 <https://github.com/scipy/scipy/pull/13146>`__: typo in csr.py * `#13148 <https://github.com/scipy/scipy/pull/13148>`__: BUG: stats: fix typo in stable rvs per gh-12870 * `#13149 <https://github.com/scipy/scipy/pull/13149>`__: DOC: spatial/stats: cross-ref random rotation matrix functions * `#13151 <https://github.com/scipy/scipy/pull/13151>`__: MAINT: stats: Fix a test and a couple PEP-8 issues. * `#13152 <https://github.com/scipy/scipy/pull/13152>`__: MAINT: stats: Use np.take_along_axis in the private function... * `#13154 <https://github.com/scipy/scipy/pull/13154>`__: ENH: stats: Implement defined handling of constant inputs in... * `#13156 <https://github.com/scipy/scipy/pull/13156>`__: DOC: maintain equal display range for ndimage.zoom example * `#13159 <https://github.com/scipy/scipy/pull/13159>`__: CI: Azure: Don't run tests on merge commits, except for coverage * `#13160 <https://github.com/scipy/scipy/pull/13160>`__: DOC: stats: disambiguate location-shifted/noncentral * `#13161 <https://github.com/scipy/scipy/pull/13161>`__: BUG: DifferentialEvolutionSolver.__del__ can fail in garbage... * `#13163 <https://github.com/scipy/scipy/pull/13163>`__: BUG: stats: fix bug in spearmanr nan propagation * `#13167 <https://github.com/scipy/scipy/pull/13167>`__: MAINT: stats: Fix a test. * `#13169 <https://github.com/scipy/scipy/pull/13169>`__: BUG: stats: Fix handling of misaligned masks in mstats.pearsonr. * `#13178 <https://github.com/scipy/scipy/pull/13178>`__: CI: testing.yml --> macos.yml * `#13181 <https://github.com/scipy/scipy/pull/13181>`__: CI: fix lint * `#13190 <https://github.com/scipy/scipy/pull/13190>`__: BUG: optimize: fix a duplicate key bug for \`test_show_options\` * `#13192 <https://github.com/scipy/scipy/pull/13192>`__: BUG:linalg: Add overwrite option to gejsv wrapper * `#13194 <https://github.com/scipy/scipy/pull/13194>`__: BUG: slsqp should be able to use rel_step * `#13203 <https://github.com/scipy/scipy/pull/13203>`__: fix typos * `#13209 <https://github.com/scipy/scipy/pull/13209>`__: TST:linalg: set the seed for cossin test * `#13212 <https://github.com/scipy/scipy/pull/13212>`__: [DOC] Backtick and directive consistency. Checksums ========= MD5 ~~~ 8c563522f671e5d748e2d1e2a534b359 scipy-1.6.0rc1-cp37-cp37m-macosx_10_9_x86_64.whl fbe44b3f1560a5c028478f62b1564ed4 scipy-1.6.0rc1-cp37-cp37m-manylinux1_i686.whl 2a8e26081fd7c594c9379172a0b6abd7 scipy-1.6.0rc1-cp37-cp37m-manylinux1_x86_64.whl af63e2db90bfda2db424a49c51332094 scipy-1.6.0rc1-cp37-cp37m-manylinux2014_aarch64.whl d3a80c09c6f4690400a79d4a72374812 scipy-1.6.0rc1-cp37-cp37m-win32.whl 3e5dc5cd18831561f48ebc2b0142bda7 scipy-1.6.0rc1-cp37-cp37m-win_amd64.whl dd2e8c978e5efe5624574f3679e15108 scipy-1.6.0rc1-cp38-cp38-macosx_10_9_x86_64.whl dcd9b3d5e38df4e20853c876a4f65bf2 scipy-1.6.0rc1-cp38-cp38-manylinux1_i686.whl c589adc371aad5d78c86973a7eee8173 scipy-1.6.0rc1-cp38-cp38-manylinux1_x86_64.whl be4bd0a23aafda1ab97cead43e36890a scipy-1.6.0rc1-cp38-cp38-manylinux2014_aarch64.whl ee964284fb7c2e5814a3caf0e33621c5 scipy-1.6.0rc1-cp38-cp38-win32.whl 885363bc091a2abbc274f6fb6ef62c53 scipy-1.6.0rc1-cp38-cp38-win_amd64.whl 7aed9c106050211a43958294138747de scipy-1.6.0rc1-cp39-cp39-macosx_10_9_x86_64.whl 6fca7d8e11d486b5295ed604098356e5 scipy-1.6.0rc1-cp39-cp39-manylinux1_i686.whl 96393118e93a621fbc33850497e3daf9 scipy-1.6.0rc1-cp39-cp39-manylinux1_x86_64.whl 3c7493a013406b7374b5f2150d590833 scipy-1.6.0rc1-cp39-cp39-manylinux2014_aarch64.whl 8e5bfac2a1fbb621f9ba2093dcfb2631 scipy-1.6.0rc1-cp39-cp39-win32.whl c07dc01ae349dbd3f6440ffb47255c66 scipy-1.6.0rc1-cp39-cp39-win_amd64.whl e852074d5b39fcb2c625cba9034efeb6 scipy-1.6.0rc1.tar.gz 123a35d8d77f8ab77ce18b512c6c2ff5 scipy-1.6.0rc1.tar.xz c84945633b4aba069d5916950ffb43d5 scipy-1.6.0rc1.zip SHA256 ~~~~~~ 180e8f6db2e9e3f6596ae33e448b1ed1a5d31d3f77310b54cc3a887f12a6664d scipy-1.6.0rc1-cp37-cp37m-macosx_10_9_x86_64.whl 8bbdc8d0bc8e7db55783f48468af538e5c3021e75f9139b0f26ed585ac38dd16 scipy-1.6.0rc1-cp37-cp37m-manylinux1_i686.whl 418bc9e5fe95ba7e8dc3bd1fec441e841a4134f68b74882509007b91f7414d07 scipy-1.6.0rc1-cp37-cp37m-manylinux1_x86_64.whl b5f4a350db2220c324ccc39de1cdcc0e58110e12d0f44fa83755dd5f18fe15d9 scipy-1.6.0rc1-cp37-cp37m-manylinux2014_aarch64.whl 683f9ef98f407f4d47fb4a344b76ef06d695bc34624974d206480088c2675be4 scipy-1.6.0rc1-cp37-cp37m-win32.whl bf38fbef5332561ec80ca1f25d6e7949fd055f9907c233d80706c8651459ec9e scipy-1.6.0rc1-cp37-cp37m-win_amd64.whl 888230f30db1cfd26ddc08f0664ed7188cbf4b53342c4a2508aba23fc4bead44 scipy-1.6.0rc1-cp38-cp38-macosx_10_9_x86_64.whl 300e9fe90c5394fb7efa94cb092a69a33603d103909d0272d8df1d51b08269cd scipy-1.6.0rc1-cp38-cp38-manylinux1_i686.whl c206a17ffcdf85078ab58917ff097cf41e151bcd7415774c09708a6850a456f8 scipy-1.6.0rc1-cp38-cp38-manylinux1_x86_64.whl 658fd197a49895f8a88d47fd45b57d832c7c48c00c2c7ef01349029791f95c90 scipy-1.6.0rc1-cp38-cp38-manylinux2014_aarch64.whl f779c8189dd5ea7c6bf69d514203df65bf6ffda13b885c069a575cdb7eb731c8 scipy-1.6.0rc1-cp38-cp38-win32.whl 6300f24b169bd6060cc83e1ce98071d05f338e5d45d2bd0f5930616bd52034d6 scipy-1.6.0rc1-cp38-cp38-win_amd64.whl b5a72d1267be5a93c678722e22f5ea7b851979b1266a86e23c6a47564fd64bf7 scipy-1.6.0rc1-cp39-cp39-macosx_10_9_x86_64.whl 85f6c3ba2ea021a1f20447e87b726904e731a01b716ae992a1fbe1b3d0f567f5 scipy-1.6.0rc1-cp39-cp39-manylinux1_i686.whl 6b26aa4970d384f5d69c430a67b55fd3be6ac9a7e4797edd9d1532d3bc3cb837 scipy-1.6.0rc1-cp39-cp39-manylinux1_x86_64.whl 9e8b6dd6debbaa8b9b4299e03553e5bbc696a8104e1511c681d7591c00b568b2 scipy-1.6.0rc1-cp39-cp39-manylinux2014_aarch64.whl 7b946bdfc746471bac3d87b82370bb746f53c185f52d8f794abf09201cae2544 scipy-1.6.0rc1-cp39-cp39-win32.whl ff8fc9af8a7c9c96f3f6f0f6621730b63f1b8dc105d9c33c6e843ed4e571440f scipy-1.6.0rc1-cp39-cp39-win_amd64.whl 11c855fb7726b54a0eb34c46a0a073c28983fe4c7665d9ee41656100c150e736 scipy-1.6.0rc1.tar.gz 5ac98e1ba1e49d2e0e11970203e9e08c3f41840b6d486ffe8292a237c9391c18 scipy-1.6.0rc1.tar.xz 1de1ee679cc0393b78c9bd035b333c267a58bf243f44e67e7eabd234c0b5ea8a scipy-1.6.0rc1.zip