Thanks for the update Matthew, it's great to see so much activity on this issue. Looks like we are headed in the right direction --and getting close. Thanks to all that are putting time into this. -Chris

On May 15, 2015, at 1:37 PM, Matthew Brett wrote:

Hi,

...

On Fri, May 15, 2015 at 1:07 PM, Chris Barker wrote: Hi folks.,

I did a little "intro to scipy" session as part of a larger Python class the other day, and was dismayed to find that "pip install numpy" still dosn't work on Windows.

Thanks mostly to Matthew Brett's work, the whole scipy stack is pip-installable on OS-X, it would be really nice if we had that for Windows.

And no, saying "you should go get Python(x,y) or Anaconda, or Canopy, or...) is really not a good solution. That is indeed the way to go if someone is primarily focusing on computational programming, but if you have a web developer, or someone new to Python for general use, they really should be able to just grab numpy and play around with it a bit without having to start all over again.

My solution was to point folks to Chris Gohlke's site -- which is a Fabulous resource --

THANK YOU CHRISTOPH!

But I still think that we should have the basic scipy stack on PyPi as Windows Wheels...

IIRC, the last run through on this discussion got stuck on the "what hardware should it support" -- wheels do not allow a selection at installc time, so we'd have to decide what instruction set to support, and just stick with that. Which would mean that:

some folks would get a numpy/scipy that would run a bit slower than it might and some folks would get one that wouldn't run at all on their machine.

But I don't see any reason that we can't find a compromise here -- do a build that supports most machines, and be done with it. Even now, people have to go get (one way or another) a MKL-based build to get optimum performance anyway -- so if we pick an instruction set support by, say (an arbitrary, and impossible to determine) 95% of machines out there -- we're good to go.

I take it there are licensing issues that prevent us from putting Chris' Binaries up on PyPi?

Yes, unfortunately we can't put MKL binaries on pypi because of the MKL license - see https://github.com/numpy/numpy/wiki/Numerical-software-on-Windows#blas--lapa.... Also see discussion in the containing thread of http://mail.scipy.org/pipermail/numpy-discussion/2014-March/069701.html .

...

But are there technical issues I'm forgetting here, or do we just need to come to a consensus as to hardware version to support and do it?

There has been some progress on this - see

https://github.com/scipy/scipy/issues/4829

I think there's a move afoot to have a Google hangout or similar on this exact topic : https://github.com/scipy/scipy/issues/2829#issuecomment-101303078 - maybe we could hammer out a policy there? Once we have got numpy and scipy built in a reasonable way, I think we will be most of the way there...

Cheers,

Matthew _______________________________________________ NumPy-Discussion mailing list NumPy-Discussion@scipy.org http://mail.scipy.org/mailman/listinfo/numpy-discussion

On Sun, May 17, 2015 at 3:06 AM, Ralf Gommers wrote:

Binaries which crash for ~1% of users (which ATLAS-SSE2 would result in) are still not acceptable I think.

what instruction set would an OpenBLAS build support? wouldn't we still need to select a lowest common denominator instructions set to support? And SEE2 was introduced with the Pentium 4in 2001 -- that is a very long time ago! I think the 1% number came from a survey of firefox downloads -- that may well not be representative of the numpy-using population. and depending on HOW it failed, 1% might be OK if we could give a reasonable error message (which maybe we can't...) -Chris -- Christopher Barker, Ph.D. Oceanographer Emergency Response Division NOAA/NOS/OR&R (206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception Chris.Barker@noaa.gov

On Sun, May 17, 2015 at 9:23 PM, Matthew Brett wrote:

I believe OpenBLAS does run-time selection too.

very cool! then an excellent option if we can get it to work (make that you can get it to work, I'm not doing squat in this effort other than nudging...) I think we discussed before having a check and error clause in

__init__.py saying something like "You have a really old computer, you can't use this binary, please go to sourceforge and download the exe installer...".

If we can to that, then there is NO reason not to put up binaries that _may_ not support some tiny percentage of users. though maybe with OpenBLAS we don't need to anyway. Thanks again to y'all for working on this. -Chris -- Christopher Barker, Ph.D. Oceanographer Emergency Response Division NOAA/NOS/OR&R (206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception Chris.Barker@noaa.gov

numpy and scipy wheels for python2.6-3.4 have been uploaded on binstar last month and are installable with pip: https://binstar.org/carlkl/numpy https://binstar.org/carlkl/scipy The toolchains can be downloaded from https://bitbucket.org/carlkl/mingw-w64-for-python/downloads with some explanations given in https://bitbucket.org/carlkl/mingw-w64-for-python/downloads/mingwpy-2015-04-... Carl 2015-05-18 23:28 GMT+02:00 Sturla Molden :

On 18/05/15 21:57, Chris Barker wrote:

...

On Sun, May 17, 2015 at 9:23 PM, Matthew Brett mailto:matthew.brett@gmail.com> wrote:

I believe OpenBLAS does run-time selection too.

very cool! then an excellent option if we can get it to work (make that you can get it to work, I'm not doing squat in this effort other than nudging...)

Carl Kleffner has built binary wheels for NumPy and SciPy with OpenBLAS configured for run-time hardware detection. I don't remember at the top of my head where you can download them for testing. IIRC there remaining test failures were not related to OpenBLAS.

Sturla

_______________________________________________ NumPy-Discussion mailing list NumPy-Discussion@scipy.org http://mail.scipy.org/mailman/listinfo/numpy-discussion

On Mon, May 18, 2015 at 6:34 AM, Nathaniel Smith wrote:

On Sun, May 17, 2015 at 3:06 AM, Ralf Gommers wrote:

...

There's the switch to OpenBLAS and building the right selection mechanism for which arch to use: http://article.gmane.org/gmane.comp.python.distutils.devel/20350. That seems now feasible to complete on a reasonable time-scale, and the problems with OpenBLAS seem to be mostly solved. Binaries which crash for ~1% of users (which ATLAS-SSE2 would result in) are still not acceptable I think.

Where are you getting this SSE2 number from btw?

This is info Matthew just collected from Firefox crash reports: https://github.com/scipy/scipy/issues/4829#issuecomment-100354752 The most detailed

public survey source for consumer hardware that I know is the Steam hardware survey:

http://store.steampowered.com/hwsurvey

It's somewhat biased towards higher-end hardware b/c it targets gamers, but there is plenty of less-high-end hardware on there as well -- notice that 20% of the surveyed computers are using intel graphics. And they're reporting that 99.92% of surveyed computers have SSE*3* support, and 100.00% have SSE2. So assuming the significant digits are accurate, this puts the upper bound on SSE2 failure on these systems at ~0.05%. Even if gamers are 10x likelier to have new hardware then the rest of the world, 1% still seems to be at least an order of magnitude too high?

That would make life easier..... Ralf

On Mon, May 18, 2015 at 6:56 AM, Nathaniel Smith wrote:

On Sun, May 17, 2015 at 9:45 PM, Ralf Gommers wrote:

...

On Mon, May 18, 2015 at 6:34 AM, Nathaniel Smith wrote:

...

On Sun, May 17, 2015 at 3:06 AM, Ralf Gommers wrote:

...

There's the switch to OpenBLAS and building the right selection mechanism for which arch to use: http://article.gmane.org/gmane.comp.python.distutils.devel/20350.

That

...

...

...

seems now feasible to complete on a reasonable time-scale, and the problems with OpenBLAS seem to be mostly solved. Binaries which crash for ~1% of users (which ATLAS-SSE2 would result in) are still not acceptable I think.

Where are you getting this SSE2 number from btw?

This is info Matthew just collected from Firefox crash reports: https://github.com/scipy/scipy/issues/4829#issuecomment-100354752

Ah, hmm. I guess it's possible that decade-old machines are less reliable and overrepresented in crash reports, but who knows :-)

It might become reasonable at some point to just go ahead and put up binaries (ideally with some check so that they fail in a human-readable way), and see how many people email us. If it's too many we can always take the wheels down again.

We should probably do that for the next release, if and only if we cannot make the switch to OpenBLAS in time. Ralf

On Sun, May 17, 2015 at 8:22 AM, Sturla Molden wrote:

Matthew Brett wrote:

...

Yes, unfortunately we can't put MKL binaries on pypi because of the MKL license - see

I believe we can, because we asked Intel for permission. From what I heard the response was positive.

We would need something formal from Intel saying that they do not require us to hold our users to their standard redistribution terms and that they waive the requirement that we be responsible for any damage to Intel that happens as a result of people using our binaries. I'm guessing we don't have this, but I'm happy to be corrected, Cheers, Matthew

On 17/05/15 20:54, Ralf Gommers wrote:

I suspect; OpenBLAS seems like the way to go (?).

I think OpenBLAS is currently the most promising candidate to replace ATLAS. But we need to build OpenBLAS with MinGW gcc, due to AT&T syntax in the assembly code. I am not sure if the old toolchain is good enough, or if we will need Carl Kleffner's binaries. Sturla

On Sun, May 17, 2015 at 7:50 PM, Matthew Brett wrote:

On Sun, May 17, 2015 at 8:22 AM, Sturla Molden

wrote:

...

Matthew Brett wrote:

...

Yes, unfortunately we can't put MKL binaries on pypi because of the MKL license - see

I believe we can, because we asked Intel for permission. From what I heard the response was positive.

We would need something formal from Intel saying that they do not require us to hold our users to their standard redistribution terms and that they waive the requirement that we be responsible for any damage to Intel that happens as a result of people using our binaries.

I'm guessing we don't have this, but I'm happy to be corrected,

I don't think permission from Intel is the blocking issue for putting these binaries up on PyPI. Even with Intel's permission, we would be putting up proprietary binaries on a page that is explicitly claiming that the files linked therein are BSD-licensed. The binaries could not be redistributed with any GPLed module, say, pygsl. We could host them on numpy.org on their own page that clearly explained the license of those files, but I think PyPI is out. -- Robert Kern

On Sun, May 17, 2015 at 9:09 PM, Chris Barker wrote:

On Sun, May 17, 2015 at 12:11 PM, Robert Kern wrote:

...

I don't think permission from Intel is the blocking issue for putting these binaries up on PyPI. Even with Intel's permission, we would be putting up proprietary binaries on a page that is explicitly claiming that the files linked therein are BSD-licensed. The binaries could not be redistributed with any GPLed module, say, pygsl.

We could host them on numpy.org on their own page that clearly explained the license of those files, but I think PyPI is out.

Can't PyPi re-direct -- so they can actualy be hosted somewhere else, but "pip install numpy" would still work?

There's two issues here: (1) we can't actually use the intel stuff (MKL, icc) under its regular license without having our release managers accepting personal liability. Which isn't going to happen. (2) The problem isn't whether they're hosted on PyPI, it's whether the people downloading them get warned about what they're downloading. The whole point is that we *don't* want 'pip install numpy' to work in this case, because it's too seamless. -n -- Nathaniel J. Smith -- http://vorpus.org

----- Original Message -----

From: Matthew Brett To: Discussion of Numerical Python Cc: Sent: Monday, May 18, 2015 6:32 AM Subject: Re: [Numpy-discussion] binary wheels for numpy?

...

On Sun, May 17, 2015 at 9:09 PM, Chris Barker wrote:

...

On Sun, May 17, 2015 at 12:11 PM, Robert Kern wrote:

...

I don't think permission from Intel is the blocking issue for

...

...

...

these binaries up on PyPI. Even with Intel's permission, we would be putting up proprietary binaries on a page that is explicitly claiming that

On Sun, May 17, 2015 at 9:27 PM, Nathaniel Smith wrote: putting the files

...

...

...

linked therein are BSD-licensed. The binaries could not be redistributed with any GPLed module, say, pygsl.

We could host them on numpy.org on their own page that clearly explained the license of those files, but I think PyPI is out.

Can't PyPi re-direct -- so they can actualy be hosted somewhere else, but "pip install numpy" would still work?

There's two issues here: (1) we can't actually use the intel stuff (MKL, icc) under its regular license without having our release managers accepting personal liability. Which isn't going to happen. (2) The problem isn't whether they're hosted on PyPI, it's whether the people downloading them get warned about what they're downloading. The whole point is that we *don't* want 'pip install numpy' to work in this case, because it's too seamless.

But you could use allow-external or allow-all-external: --allow-external <package> Allow the installation of a package even if it is externally hosted --allow-all-external Allow the installation of all packages that are externally hosted https://pip.pypa.io/en/latest/reference/pip_wheel.html#allow-external

On Fri, May 15, 2015 at 6:56 PM, wrote:

Unrelated to the pip/wheel discussion.

In my experience by far the easiest to get something running to play with is using Winpython. Download and unzip (and maybe add to system path) and most of the data analysis stack is available.

Sure -- if someone comes to me wanting to use python for scientific/computational computing, I point them to one of the distributions -- maybe I'll add WinPython to that list now. But if someone is already using python for, say web development, then they already have an installation up and running, and I want to give them an easy option to add numpy (and secondarily scipy) to what they have easily. And it looks like we are almost there, thanks to a lot of work by a few key folks -- thanks! -Chris -- Christopher Barker, Ph.D. Oceanographer Emergency Response Division NOAA/NOS/OR&R (206) 526-6959 voice 7600 Sand Point Way NE (206) 526-6329 fax Seattle, WA 98115 (206) 526-6317 main reception Chris.Barker@noaa.gov