Mailman 3 November 2012 - Python-Dev

PEP 1, PEP Purpose and Guidelines
by barry＠zope.com 18 May '21

18 May '21

It has been a while since I posted a copy of PEP 1 to the mailing lists and newsgroups. I've recently done some updating of a few sections, so in the interest of gaining wider community participation in the Python development process, I'm posting the latest revision of PEP 1 here. A version of the PEP is always available on-line at http://www.python.org/peps/pep-0001.html Enjoy, -Barry -------------------- snip snip -------------------- PEP: 1 Title: PEP Purpose and Guidelines Version: $Revision: 1.36 $ Last-Modified: $Date: 2002/07/29 18:34:59 $ Author: Barry A. Warsaw, Jeremy Hylton Status: Active Type: Informational Created: 13-Jun-2000 Post-History: 21-Mar-2001, 29-Jul-2002 What is a PEP? PEP stands for Python Enhancement Proposal. A PEP is a design document providing information to the Python community, or describing a new feature for Python. The PEP should provide a concise technical specification of the feature and a rationale for the feature. We intend PEPs to be the primary mechanisms for proposing new features, for collecting community input on an issue, and for documenting the design decisions that have gone into Python. The PEP author is responsible for building consensus within the community and documenting dissenting opinions. Because the PEPs are maintained as plain text files under CVS control, their revision history is the historical record of the feature proposal[1]. Kinds of PEPs There are two kinds of PEPs. A standards track PEP describes a new feature or implementation for Python. An informational PEP describes a Python design issue, or provides general guidelines or information to the Python community, but does not propose a new feature. Informational PEPs do not necessarily represent a Python community consensus or recommendation, so users and implementors are free to ignore informational PEPs or follow their advice. PEP Work Flow The PEP editor, Barry Warsaw <peps(a)python.org>, assigns numbers for each PEP and changes its status. The PEP process begins with a new idea for Python. It is highly recommended that a single PEP contain a single key proposal or new idea. The more focussed the PEP, the more successfully it tends to be. The PEP editor reserves the right to reject PEP proposals if they appear too unfocussed or too broad. If in doubt, split your PEP into several well-focussed ones. Each PEP must have a champion -- someone who writes the PEP using the style and format described below, shepherds the discussions in the appropriate forums, and attempts to build community consensus around the idea. The PEP champion (a.k.a. Author) should first attempt to ascertain whether the idea is PEP-able. Small enhancements or patches often don't need a PEP and can be injected into the Python development work flow with a patch submission to the SourceForge patch manager[2] or feature request tracker[3]. The PEP champion then emails the PEP editor <peps(a)python.org> with a proposed title and a rough, but fleshed out, draft of the PEP. This draft must be written in PEP style as described below. If the PEP editor approves, he will assign the PEP a number, label it as standards track or informational, give it status 'draft', and create and check-in the initial draft of the PEP. The PEP editor will not unreasonably deny a PEP. Reasons for denying PEP status include duplication of effort, being technically unsound, not providing proper motivation or addressing backwards compatibility, or not in keeping with the Python philosophy. The BDFL (Benevolent Dictator for Life, Guido van Rossum) can be consulted during the approval phase, and is the final arbitrator of the draft's PEP-ability. If a pre-PEP is rejected, the author may elect to take the pre-PEP to the comp.lang.python newsgroup (a.k.a. python-list(a)python.org mailing list) to help flesh it out, gain feedback and consensus from the community at large, and improve the PEP for re-submission. The author of the PEP is then responsible for posting the PEP to the community forums, and marshaling community support for it. As updates are necessary, the PEP author can check in new versions if they have CVS commit permissions, or can email new PEP versions to the PEP editor for committing. Standards track PEPs consists of two parts, a design document and a reference implementation. The PEP should be reviewed and accepted before a reference implementation is begun, unless a reference implementation will aid people in studying the PEP. Standards Track PEPs must include an implementation - in the form of code, patch, or URL to same - before it can be considered Final. PEP authors are responsible for collecting community feedback on a PEP before submitting it for review. A PEP that has not been discussed on python-list(a)python.org and/or python-dev(a)python.org will not be accepted. However, wherever possible, long open-ended discussions on public mailing lists should be avoided. Strategies to keep the discussions efficient include, setting up a separate SIG mailing list for the topic, having the PEP author accept private comments in the early design phases, etc. PEP authors should use their discretion here. Once the authors have completed a PEP, they must inform the PEP editor that it is ready for review. PEPs are reviewed by the BDFL and his chosen consultants, who may accept or reject a PEP or send it back to the author(s) for revision. Once a PEP has been accepted, the reference implementation must be completed. When the reference implementation is complete and accepted by the BDFL, the status will be changed to `Final.' A PEP can also be assigned status `Deferred.' The PEP author or editor can assign the PEP this status when no progress is being made on the PEP. Once a PEP is deferred, the PEP editor can re-assign it to draft status. A PEP can also be `Rejected'. Perhaps after all is said and done it was not a good idea. It is still important to have a record of this fact. PEPs can also be replaced by a different PEP, rendering the original obsolete. This is intended for Informational PEPs, where version 2 of an API can replace version 1. PEP work flow is as follows: Draft -> Accepted -> Final -> Replaced ^ +----> Rejected v Deferred Some informational PEPs may also have a status of `Active' if they are never meant to be completed. E.g. PEP 1. What belongs in a successful PEP? Each PEP should have the following parts: 1. Preamble -- RFC822 style headers containing meta-data about the PEP, including the PEP number, a short descriptive title (limited to a maximum of 44 characters), the names, and optionally the contact info for each author, etc. 2. Abstract -- a short (~200 word) description of the technical issue being addressed. 3. Copyright/public domain -- Each PEP must either be explicitly labelled as placed in the public domain (see this PEP as an example) or licensed under the Open Publication License[4]. 4. Specification -- The technical specification should describe the syntax and semantics of any new language feature. The specification should be detailed enough to allow competing, interoperable implementations for any of the current Python platforms (CPython, JPython, Python .NET). 5. Motivation -- The motivation is critical for PEPs that want to change the Python language. It should clearly explain why the existing language specification is inadequate to address the problem that the PEP solves. PEP submissions without sufficient motivation may be rejected outright. 6. Rationale -- The rationale fleshes out the specification by describing what motivated the design and why particular design decisions were made. It should describe alternate designs that were considered and related work, e.g. how the feature is supported in other languages. The rationale should provide evidence of consensus within the community and discuss important objections or concerns raised during discussion. 7. Backwards Compatibility -- All PEPs that introduce backwards incompatibilities must include a section describing these incompatibilities and their severity. The PEP must explain how the author proposes to deal with these incompatibilities. PEP submissions without a sufficient backwards compatibility treatise may be rejected outright. 8. Reference Implementation -- The reference implementation must be completed before any PEP is given status 'Final,' but it need not be completed before the PEP is accepted. It is better to finish the specification and rationale first and reach consensus on it before writing code. The final implementation must include test code and documentation appropriate for either the Python language reference or the standard library reference. PEP Template PEPs are written in plain ASCII text, and should adhere to a rigid style. There is a Python script that parses this style and converts the plain text PEP to HTML for viewing on the web[5]. PEP 9 contains a boilerplate[7] template you can use to get started writing your PEP. Each PEP must begin with an RFC822 style header preamble. The headers must appear in the following order. Headers marked with `*' are optional and are described below. All other headers are required. PEP: <pep number> Title: <pep title> Version: <cvs version string> Last-Modified: <cvs date string> Author: <list of authors' real names and optionally, email addrs> * Discussions-To: <email address> Status: <Draft | Active | Accepted | Deferred | Final | Replaced> Type: <Informational | Standards Track> * Requires: <pep numbers> Created: <date created on, in dd-mmm-yyyy format> * Python-Version: <version number> Post-History: <dates of postings to python-list and python-dev> * Replaces: <pep number> * Replaced-By: <pep number> The Author: header lists the names and optionally, the email addresses of all the authors/owners of the PEP. The format of the author entry should be address(a)dom.ain (Random J. User) if the email address is included, and just Random J. User if the address is not given. If there are multiple authors, each should be on a separate line following RFC 822 continuation line conventions. Note that personal email addresses in PEPs will be obscured as a defense against spam harvesters. Standards track PEPs must have a Python-Version: header which indicates the version of Python that the feature will be released with. Informational PEPs do not need a Python-Version: header. While a PEP is in private discussions (usually during the initial Draft phase), a Discussions-To: header will indicate the mailing list or URL where the PEP is being discussed. No Discussions-To: header is necessary if the PEP is being discussed privately with the author, or on the python-list or python-dev email mailing lists. Note that email addresses in the Discussions-To: header will not be obscured. Created: records the date that the PEP was assigned a number, while Post-History: is used to record the dates of when new versions of the PEP are posted to python-list and/or python-dev. Both headers should be in dd-mmm-yyyy format, e.g. 14-Aug-2001. PEPs may have a Requires: header, indicating the PEP numbers that this PEP depends on. PEPs may also have a Replaced-By: header indicating that a PEP has been rendered obsolete by a later document; the value is the number of the PEP that replaces the current document. The newer PEP must have a Replaces: header containing the number of the PEP that it rendered obsolete. PEP Formatting Requirements PEP headings must begin in column zero and the initial letter of each word must be capitalized as in book titles. Acronyms should be in all capitals. The body of each section must be indented 4 spaces. Code samples inside body sections should be indented a further 4 spaces, and other indentation can be used as required to make the text readable. You must use two blank lines between the last line of a section's body and the next section heading. You must adhere to the Emacs convention of adding two spaces at the end of every sentence. You should fill your paragraphs to column 70, but under no circumstances should your lines extend past column 79. If your code samples spill over column 79, you should rewrite them. Tab characters must never appear in the document at all. A PEP should include the standard Emacs stanza included by example at the bottom of this PEP. A PEP must contain a Copyright section, and it is strongly recommended to put the PEP in the public domain. When referencing an external web page in the body of a PEP, you should include the title of the page in the text, with a footnote reference to the URL. Do not include the URL in the body text of the PEP. E.g. Refer to the Python Language web site [1] for more details. ... [1] http://www.python.org When referring to another PEP, include the PEP number in the body text, such as "PEP 1". The title may optionally appear. Add a footnote reference that includes the PEP's title and author. It may optionally include the explicit URL on a separate line, but only in the References section. Note that the pep2html.py script will calculate URLs automatically, e.g.: ... Refer to PEP 1 [7] for more information about PEP style ... References [7] PEP 1, PEP Purpose and Guidelines, Warsaw, Hylton http://www.python.org/peps/pep-0001.html If you decide to provide an explicit URL for a PEP, please use this as the URL template: http://www.python.org/peps/pep-xxxx.html PEP numbers in URLs must be padded with zeros from the left, so as to be exactly 4 characters wide, however PEP numbers in text are never padded. Reporting PEP Bugs, or Submitting PEP Updates How you report a bug, or submit a PEP update depends on several factors, such as the maturity of the PEP, the preferences of the PEP author, and the nature of your comments. For the early draft stages of the PEP, it's probably best to send your comments and changes directly to the PEP author. For more mature, or finished PEPs you may want to submit corrections to the SourceForge bug manager[6] or better yet, the SourceForge patch manager[2] so that your changes don't get lost. If the PEP author is a SF developer, assign the bug/patch to him, otherwise assign it to the PEP editor. When in doubt about where to send your changes, please check first with the PEP author and/or PEP editor. PEP authors who are also SF committers, can update the PEPs themselves by using "cvs commit" to commit their changes. Remember to also push the formatted PEP text out to the web by doing the following: % python pep2html.py -i NUM where NUM is the number of the PEP you want to push out. See % python pep2html.py --help for details. Transferring PEP Ownership It occasionally becomes necessary to transfer ownership of PEPs to a new champion. In general, we'd like to retain the original author as a co-author of the transferred PEP, but that's really up to the original author. A good reason to transfer ownership is because the original author no longer has the time or interest in updating it or following through with the PEP process, or has fallen off the face of the 'net (i.e. is unreachable or not responding to email). A bad reason to transfer ownership is because you don't agree with the direction of the PEP. We try to build consensus around a PEP, but if that's not possible, you can always submit a competing PEP. If you are interested assuming ownership of a PEP, send a message asking to take over, addressed to both the original author and the PEP editor <peps(a)python.org>. If the original author doesn't respond to email in a timely manner, the PEP editor will make a unilateral decision (it's not like such decisions can be reversed. :). References and Footnotes [1] This historical record is available by the normal CVS commands for retrieving older revisions. For those without direct access to the CVS tree, you can browse the current and past PEP revisions via the SourceForge web site at http://cvs.sourceforge.net/cgi-bin/cvsweb.cgi/python/nondist/peps/?cvsroot=… [2] http://sourceforge.net/tracker/?group_id=5470&atid=305470 [3] http://sourceforge.net/tracker/?atid=355470&group_id=5470&func=browse [4] http://www.opencontent.org/openpub/ [5] The script referred to here is pep2html.py, which lives in the same directory in the CVS tree as the PEPs themselves. Try "pep2html.py --help" for details. The URL for viewing PEPs on the web is http://www.python.org/peps/ [6] http://sourceforge.net/tracker/?group_id=5470&atid=305470 [7] PEP 9, Sample PEP Template http://www.python.org/peps/pep-0009.html Copyright This document has been placed in the public domain. Local Variables: mode: indented-text indent-tabs-mode: nil sentence-end-double-space: t fill-column: 70 End:

8 14

Reviving restricted mode?
by Guido van Rossum 14 Aug '14

14 Aug '14

I've received some enthusiastic emails from someone who wants to revive restricted mode. He started out with a bunch of patches to the CPython runtime using ctypes, which he attached to an App Engine bug: http://code.google.com/p/googleappengine/issues/detail?id=671 Based on his code (the file secure.py is all you need, included in secure.tar.gz) it seems he believes the only security leaks are __subclasses__, gi_frame and gi_code. (I have since convinced him that if we add "restricted" guards to these attributes, he doesn't need the functions added to sys.) I don't recall the exploits that Samuele once posted that caused the death of rexec.py -- does anyone recall, or have a pointer to the threads? -- --Guido van Rossum (home page: http://www.python.org/~guido/)

19 35

Make extension module initialisation more like Python module initialisation
by Stefan Behnel 06 Aug '13

06 Aug '13

Hi, I suspect that this will be put into a proper PEP at some point, but I'd like to bring this up for discussion first. This came out of issues 13429 and 16392. http://bugs.python.org/issue13429 http://bugs.python.org/issue16392 Stefan The problem =========== Python modules and extension modules are not being set up in the same way. For Python modules, the module is created and set up first, then the module code is being executed. For extensions, i.e. shared libraries, the module init function is executed straight away and does both the creation and initialisation. This means that it knows neither the __file__ it is being loaded from nor its package (i.e. its FQMN). This hinders relative imports and resource loading. In Py3, it's also not being added to sys.modules, which means that a (potentially transitive) re-import of the module will really try to reimport it and thus run into an infinite loop when it executes the module init function again. And without the FQMN, it's not trivial to correctly add the module to sys.modules either. We specifically run into this for Cython generated modules, for which it's not uncommon that the module init code has the same level of complexity as that of any 'regular' Python module. Also, the lack of a FQMN and correct file path hinders the compilation of __init__.py modules, i.e. packages, especially when relative imports are being used at module init time. The proposal ============ I propose to split the extension module initialisation into two steps in Python 3.4, in a backwards compatible way. Step 1: The current module init function can be reduced to just creating the module instance and returning it (and potentially doing some simple C level setup). Optionally, after creating the module (and this is the new part), the module init code can register a C callback function that will be called after setting up the module. Step 2: The shared library importer receives the module instance from the module init function, adds __file__, __path__, __package__ and friends to the module dict, and then checks for the callback. If non-NULL, it calls it to continue the module initialisation by user code. The callback ============ The callback is defined as follows:: int (*PyModule_init_callback)(PyObject* the_module, PyModuleInitContext* context) "PyModuleInitContext" is a struct that is meant mostly for making the callback more future proof by allowing additional parameters to be passed in. For now, I can see a use case for the following fields:: struct PyModuleInitContext { char* module_name; char* qualified_module_name; } Both names are encoded in UTF-8. As for the file path, I consider it best to retrieve it from the module's __file__ attribute as a Python string object to reduce filename encoding problems. Note that this struct argument is not strictly required, but given that this proposal would have been much simpler if the module init function had accepted such an argument in the first place, I consider it a good idea not to let this chance pass by again. The registration of the callback uses a new C-API function: int PyModule_SetInitFunction(PyObject* module, PyModule_init_callback callback) The function name uses "Set" instead of "Register" to make it clear that there is only one such function per module. An alternative would be a new module creation function "PyModule_Create3()" that takes the callback as third argument, in addition to what "PyModule_Create2()" accepts. This would require users to explicitly pass in the (second) version argument, which might be considered only a minor issue. Implementation ============== The implementation requires local changes to the extension module importer and a new C-API function. In order to store the callback, it should use a new field in the module object struct. Open questions ============== It is not clear how extensions should be handled that register more than one module in their module init function, e.g. compiled packages. One possibility would be to leave the setup to the user, who would have to know all FQMNs anyway in this case, although not the import file path. Alternatively, the import machinery could use a stack to remember for which modules a callback was registered during the last init function call, set up all of them and then call their callbacks. It's not clear if this meets the intention of the user. Alternatives ============ 1) It would be possible to make extension modules optionally export another symbol, e.g. "PyInit2_modulename", that the shared library loader would call in addition to the required function "PyInit_modulename". This would remove the need for a new API that registers the above callback. The drawback is that it also makes it easier to write broken code because a Python version or implementation that does not support this second symbol would simply not call it, without error. The new C-API function would let the build fail instead if it is not supported. 2) The callback could be made available as a Python function in the module dict, thus also removing the need for an explicit registration API. However, this approach would add overhead to both sides, the importer code and the user provided module init code, as it would require additional dictionary handling and the implementation of a one-time Python function in user code. It would also suffer from the problem that missing support in the runtime would pass silently. 3) The callback could be registered statically in the PyModuleDef struct by adding a new field. This is not trivial to do in a backwards compatible way because the struct would grow longer without explicit initialisation by existing user code. Extending PyModuleDef_HEAD_INIT might be possible but would still break at least binary compatibility. 4) Pass a new context argument into the module init function that contains all information necessary to properly and completely set up the module at creation time. This would provide a much simpler and cleaner solution than the proposed solution. However, it will not be possible before Python 4 as it breaks backwards compatibility with all existing extension modules at both the source and binary level.

5 15

PEP 423 : naming conventions and recipes related to packaging
by Benoît Bryon 05 Jul '13

05 Jul '13

Hi, Here is an informational PEP proposal: http://hg.python.org/peps/file/52767ab7e140/pep-0423.txt Could you review it for style, consistency and content? Additional notes: * Original discussion posted to distutils-sig(a)python.org * started on May 2012 at http://mail.python.org/pipermail/distutils-sig/2012-May/018551.html * continues in June 2012 at http://mail.python.org/pipermail/distutils-sig/2012-June/018641.html * that's why I set "Discussion-To:<distutils-sig(a)python.org>" header. * Original document was edited as a contrib to cpython documentation: * http://bugs.python.org/issue14899 * file history at https://bitbucket.org/benoitbryon/cpython/history/Doc/packaging/packagename… * but it looked like a PEP, so posted to peps(a)python.org... Regards, Benoit (benoitbb on irc.freenode.net)

11 20

Bad python 2.5 build on OSX 10.8 mountain lion
by Guido van Rossum 14 Mar '13

14 Mar '13

As discussed here, the python 2.5 binary distributed by Apple on mountain lion is broken. Could someone file an official complaint? This is really bad... --Guido -- --Guido van Rossum (python.org/~guido)

3 10

Cut/Copy/Paste items in IDLE right click context menu
by Andrew Svetlov 17 Feb '13

17 Feb '13

Hi. There are issue for subject: http://bugs.python.org/issue1207589 It has patches, implemented well and committed. I've pushed it to versions 2.7, 3.2, 3.3 and 3.4. My thoughts are: the issue is not brand new subject but improvement for current IDLE functionality. Added code cannot break any existing program/library I hope, it's related to humans who use IDLE only. It is desirable feature and probably IDLE users will be ok with new items in context menu even they are still 2.7 users. There are another opinion: it is new feature, not a bug, and the patch should be applied to 3.4 only. If you look on discussion for issue (http://bugs.python.org/issue1207589) you can see we cannot make decision, votes are split. I want to raise the question on this mailing list (as Terry Reedy suggested) to ask for community opinion. Thanks, Andrew Svetlov

7 13

Point of building without threads?
by Antoine Pitrou 16 Feb '13

16 Feb '13

Hello, I guess a long time ago, threading support in operating systems wasn't very widespread, but these days all our supported platforms have it. Is it still useful for production purposes to configure --without-threads? Do people use this option for something else than curiosity of mind? Regards Antoine.

10 22

Accept just PEP-0426
by Daniel Holth 14 Jan '13

14 Jan '13

I think this PEP is a significant improvement from its predecessor. It represents features like extras (provides-extra) and build requirements (setup-requires-dist) that are in use in the Python community but cannot be represented in older versions of the format, it finally specifies a UTF-8 encoding, removes RFC 822, provides an extension mechanism, and allows the description to be placed in the document payload. PEP 426 doesn't have anything to do with the Wheel PEPs 425 and 427, other than that its features are necessary to usefully represent a large number of existing Python packages. How about moving this one along to focus on the other two. I'm not sure what the Post-History should be. We have been talking about it for a while. Thanks, Daniel Holth PEP: 426 Title: Metadata for Python Software Packages 1.3 Version: $Revision$ Last-Modified: $Date$ Author: Daniel Holth <dholth(a)fastmail.fm> Discussions-To: Distutils SIG Status: Draft Type: Standards Track Content-Type: text/x-rst Created: 30 Aug 2012 Abstract ======== This PEP describes a mechanism for adding metadata to Python distributions. It includes specifics of the field names, and their semantics and usage. This document specifies version 1.3 of the metadata format. Version 1.0 is specified in PEP 241. Version 1.1 is specified in PEP 314. Version 1.2 is specified in PEP 345. Version 1.3 of the metadata format adds fields designed to make third-party packaging of Python Software easier and defines a formal extension mechanism. The fields are "Setup-Requires-Dist" "Provides-Extra", and "Extension". This version also adds the `extra` variable to the `environment markers` specification and allows the description to be placed into a payload section. Metadata Files ============== The syntax defined in this PEP is for use with Python distribution metadata files. The file format is a simple UTF-8 encoded Key: value format with case-insensitive keys and no maximum line length, followed by a blank line and an arbitrary payload. It is parseable by the ``email`` module with an appropriate ``email.policy.Policy()``. When ``metadata`` is a Unicode string, ```email.parser.Parser().parsestr(metadata)`` is a serviceable parser. There are two standard locations for these metadata files: * the ``PKG-INFO`` file included in the base directory of Python source distribution archives (as created by the distutils ``sdist`` command) * the ``.dist-info/METADATA`` files in a Python installation database, as described in PEP 376. Other tools involved in Python distribution may also use this format. Encoding ======== Metadata 1.3 files are UTF-8 with the restriction that keys must be ASCII. Parser implementations should be aware that older versions of the Metadata specification do not specify an encoding. Fields ====== This section specifies the names and semantics of each of the supported metadata fields. In a single Metadata 1.3 file, fields marked with "(optional)" may occur 0 or 1 times. Fields marked with "(multiple use)" may be specified 0, 1 or more times. Only "Metadata-Version", "Name", "Version", and "Summary" must appear exactly once. The fields may appear in any order within the file. Metadata-Version :::::::::::::::: Version of the file format; "1.3" is the only legal value. Example:: Metadata-Version: 1.3 Name :::: The name of the distribution. Example:: Name: BeagleVote Version ::::::: A string containing the distribution's version number. This field must be in the format specified in PEP 386. Example:: Version: 1.0a2 Summary ::::::: A one-line summary of what the distribution does. Example:: Summary: A module for collecting votes from beagles. Platform (multiple use) ::::::::::::::::::::::: A Platform specification describing an operating system supported by the distribution which is not listed in the "Operating System" Trove classifiers. See "Classifier" below. Examples:: Platform: ObscureUnix Platform: RareDOS Supported-Platform (multiple use) ::::::::::::::::::::::::::::::::: Binary distributions containing a metadata file will use the Supported-Platform field in their metadata to specify the OS and CPU for which the binary distribution was compiled. The semantics of the Supported-Platform field are not specified in this PEP. Example:: Supported-Platform: RedHat 7.2 Supported-Platform: i386-win32-2791 Description (optional, deprecated) :::::::::::::::::::::::::::::::::: A longer description of the distribution that can run to several paragraphs. Software that deals with metadata should not assume any maximum size for this field. The contents of this field can be written using reStructuredText markup [1]_. For programs that work with the metadata, supporting markup is optional; programs can also display the contents of the field as-is. This means that authors should be conservative in the markup they use. Since a line separator immediately followed by another line separator indicates the end of the headers section, any line separators in the description must be suffixed by whitespace to indicate continuation. Since Metadata 1.3 the recommended place for the description is in the payload section of the document, after the last header. The description does not need to be reformatted when it is included in the payload. Keywords (optional) ::::::::::::::::::: A list of additional keywords to be used to assist searching for the distribution in a larger catalog. Example:: Keywords: dog puppy voting election Home-page (optional) :::::::::::::::::::: A string containing the URL for the distribution's home page. Example:: Home-page: http://www.example.com/~cschultz/bvote/ Download-URL (optional) ::::::::::::::::::::::: A string containing the URL from which this version of the distribution can be downloaded. (This means that the URL can't be something like ".../BeagleVote-latest.tgz", but instead must be ".../BeagleVote-0.45.tgz".) Author (optional) ::::::::::::::::: A string containing the author's name at a minimum; additional contact information may be provided. Example:: Author: C. Schultz, Universal Features Syndicate, Los Angeles, CA <cschultz(a)peanuts.example.com> Author-email (optional) ::::::::::::::::::::::: A string containing the author's e-mail address. It contains a name and e-mail address in the RFC 5322 recommended ``Address Specification`` format. Example:: Author-email: "C. Schultz" <cschultz(a)example.com> Maintainer (optional) ::::::::::::::::::::: A string containing the maintainer's name at a minimum; additional contact information may be provided. Note that this field is intended for use when a project is being maintained by someone other than the original author: it should be omitted if it is identical to ``Author``. Example:: Maintainer: C. Schultz, Universal Features Syndicate, Los Angeles, CA <cschultz(a)peanuts.example.com> Maintainer-email (optional) ::::::::::::::::::::::::::: A string containing the maintainer's e-mail address. It has the same format as ``Author-email``. Note that this field is intended for use when a project is being maintained by someone other than the original author: it should be omitted if it is identical to ``Author-email``. Example:: Maintainer-email: "C. Schultz" <cschultz(a)example.com> License (optional) :::::::::::::::::: Text indicating the license covering the distribution where the license is not a selection from the "License" Trove classifiers. See "Classifier" below. This field may also be used to specify a particular version of a license which is named via the ``Classifier`` field, or to indicate a variation or exception to such a license. Examples:: License: This software may only be obtained by sending the author a postcard, and then the user promises not to redistribute it. License: GPL version 3, excluding DRM provisions The full text of the license would normally be included in a separate file. Classifier (multiple use) ::::::::::::::::::::::::: Each entry is a string giving a single classification value for the distribution. Classifiers are described in PEP 301 [2]. Examples:: Classifier: Development Status :: 4 - Beta Classifier: Environment :: Console (Text Based) Requires-Dist (multiple use) :::::::::::::::::::::::::::: Each entry contains a string naming some other distutils project required by this distribution. The format of a requirement string is identical to that of a distutils project name (e.g., as found in the ``Name:`` field. optionally followed by a version declaration within parentheses. The distutils project names should correspond to names as found on the `Python Package Index`_. Version declarations must follow the rules described in `Version Specifiers`_ Examples:: Requires-Dist: pkginfo Requires-Dist: PasteDeploy Requires-Dist: zope.interface (>3.5.0) Setup-Requires-Dist (multiple use) :::::::::::::::::::::::::::::::::: Like Requires-Dist, but names dependencies needed while the distributions's distutils / packaging `setup.py` / `setup.cfg` is run. Commonly used to generate a manifest from version control. Examples:: Setup-Requires-Dist: custom_setup_command Dependencies mentioned in `Setup-Requires-Dist` may be installed exclusively for setup and are not guaranteed to be available at run time. Provides-Dist (multiple use) :::::::::::::::::::::::::::: Each entry contains a string naming a Distutils project which is contained within this distribution. This field *must* include the project identified in the ``Name`` field, followed by the version : Name (Version). A distribution may provide additional names, e.g. to indicate that multiple projects have been bundled together. For instance, source distributions of the ``ZODB`` project have historically included the ``transaction`` project, which is now available as a separate distribution. Installing such a source distribution satisfies requirements for both ``ZODB`` and ``transaction``. A distribution may also provide a "virtual" project name, which does not correspond to any separately-distributed project: such a name might be used to indicate an abstract capability which could be supplied by one of multiple projects. E.g., multiple projects might supply RDBMS bindings for use by a given ORM: each project might declare that it provides ``ORM-bindings``, allowing other projects to depend only on having at most one of them installed. A version declaration may be supplied and must follow the rules described in `Version Specifiers`_. The distribution's version number will be implied if none is specified. Examples:: Provides-Dist: OtherProject Provides-Dist: AnotherProject (3.4) Provides-Dist: virtual_package Obsoletes-Dist (multiple use) ::::::::::::::::::::::::::::: Each entry contains a string describing a distutils project's distribution which this distribution renders obsolete, meaning that the two projects should not be installed at the same time. Version declarations can be supplied. Version numbers must be in the format specified in `Version Specifiers`_. The most common use of this field will be in case a project name changes, e.g. Gorgon 2.3 gets subsumed into Torqued Python 1.0. When you install Torqued Python, the Gorgon distribution should be removed. Examples:: Obsoletes-Dist: Gorgon Obsoletes-Dist: OtherProject (<3.0) Requires-Python (optional) :::::::::::::::::::::::::: This field specifies the Python version(s) that the distribution is guaranteed to be compatible with. Version numbers must be in the format specified in `Version Specifiers`_. Examples:: Requires-Python: 2.5 Requires-Python: >2.1 Requires-Python: >=2.3.4 Requires-Python: >=2.5,<2.7 Requires-External (multiple use) :::::::::::::::::::::::::::::::: Each entry contains a string describing some dependency in the system that the distribution is to be used. This field is intended to serve as a hint to downstream project maintainers, and has no semantics which are meaningful to the ``distutils`` distribution. The format of a requirement string is a name of an external dependency, optionally followed by a version declaration within parentheses. Because they refer to non-Python software releases, version numbers for this field are **not** required to conform to the format specified in PEP 386: they should correspond to the version scheme used by the external dependency. Notice that there's is no particular rule on the strings to be used. Examples:: Requires-External: C Requires-External: libpng (>=1.5) Project-URL (multiple use) :::::::::::::::::::::::::: A string containing a label and a browsable URL for the project, separated by the last occurrence of comma and space ", ". Example:: Bug, Issue Tracker, http://bitbucket.org/tarek/distribute/issues/ The label is a free text. Provides-Extra (multiple use) ::::::::::::::::::::::::::::: A string containing the name of an optional feature. Must be printable ASCII, not containing whitespace, comma (,), or square brackets []. May be used to make a dependency conditional on whether the optional feature has been requested. Example:: Name: beaglevote Provides-Extra: pdf Requires-Dist: reportlab; extra == 'pdf' Requires-Dist: nose; extra == 'test' Requires-Dist: sphinx; extra == 'doc' A second distribution requires an optional dependency by placing it inside square brackets and can request multiple features by separating them with a comma (,). The full set of requirements is the union of the `Requires-Dist` sets evaluated with `extra` set to `None` and then to the name of each requested feature. Example:: Requires-Dist: beaglevote[pdf] -> requires beaglevote, reportlab Requires-Dist: beaglevote[test, doc] -> requires beaglevote, sphinx, nose Two feature names `test` and `doc` are reserved to mark dependencies that are needed for running automated tests and generating documentation, respectively. It is legal to specify `Provides-Extra` without referencing it in any `Requires-Dist`. It is an error to request a feature name that has not been declared with `Provides-Extra`. Extension (multiple use) :::::::::::::::::::::::: An ASCII string, not containing whitespace or the / character, that indicates the presence of extended metadata. Additional tags defined by an `Extension: Chili` must be of the form `Chili/Name`:: Extension: Chili Chili/Type: Poblano Chili/Heat: Mild An implementation might iterate over all the declared `Extension:` fields to invoke the processors for those extensions. As the order of the fields is not used, the `Extension: Chili` field may appear before or after its declared tags `Chili/Type:` etc. Version Specifiers ================== Version specifiers are a series of conditional operators and version numbers, separated by commas. Conditional operators must be one of "<", ">", "<=", ">=", "==" and "!=". Any number of conditional operators can be specified, e.g. the string ">1.0, !=1.3.4, <2.0" is a legal version declaration. The comma (",") is equivalent to the **and** operator. Each version number must be in the format specified in PEP 386. When a version is provided, it always includes all versions that starts with the same value. For example the "2.5" version of Python will include versions like "2.5.2" or "2.5.3". Pre and post releases in that case are excluded. So in our example, versions like "2.5a1" are not included when "2.5" is used. If the first version of the range is required, it has to be explicitly given. In our example, it will be "2.5.0". Notice that some projects might omit the ".0" prefix for the first release of the "2.5.x" series: - 2.5 - 2.5.1 - 2.5.2 - etc. In that case, "2.5.0" will have to be explicitly used to avoid any confusion between the "2.5" notation that represents the full range. It is a recommended practice to use schemes of the same length for a series to completely avoid this problem. Some Examples: - ``Requires-Dist: zope.interface (3.1)``: any version that starts with 3.1, excluding post or pre-releases. - ``Requires-Dist: zope.interface (==3.1)``: equivalent to ``Requires-Dist: zope.interface (3.1)``. - ``Requires-Dist: zope.interface (3.1.0)``: any version that starts with 3.1.0, excluding post or pre-releases. Since that particular project doesn't use more than 3 digits, it also means "only the 3.1.0 release". - ``Requires-Python: 3``: Any Python 3 version, no matter wich one, excluding post or pre-releases. - ``Requires-Python: >=2.6,<3``: Any version of Python 2.6 or 2.7, including post releases of 2.6, pre and post releases of 2.7. It excludes pre releases of Python 3. - ``Requires-Python: 2.6.2``: Equivalent to ">=2.6.2,<2.6.3". So this includes only Python 2.6.2. Of course, if Python was numbered with 4 digits, it would have include all versions of the 2.6.2 series. - ``Requires-Python: 2.5.0``: Equivalent to ">=2.5.0,<2.5.1". - ``Requires-Dist: zope.interface (3.1,!=3.1.3)``: any version that starts with 3.1, excluding post or pre-releases of 3.1 *and* excluding any version that starts with "3.1.3". For this particular project, this means: "any version of the 3.1 series but not 3.1.3". This is equivalent to: ">=3.1,!=3.1.3,<3.2". Environment markers =================== An **environment marker** is a marker that can be added at the end of a field after a semi-colon (";"), to add a condition about the execution environment. Here are some example of fields using such markers:: Requires-Dist: pywin32 (>1.0); sys.platform == 'win32' Obsoletes-Dist: pywin31; sys.platform == 'win32' Requires-Dist: foo (1,!=1.3); platform.machine == 'i386' Requires-Dist: bar; python_version == '2.4' or python_version == '2.5' Requires-External: libxslt; 'linux' in sys.platform The micro-language behind this is a simple subset of Python: it compares only strings, with the ``==`` and ``in`` operators (and their opposites), and with the ability to combine expressions. Parenthesis are supported for grouping. The pseudo-grammar is :: EXPR [in|==|!=|not in] EXPR [or|and] ... where ``EXPR`` belongs to any of those: - python_version = '%s.%s' % (sys.version_info[0], sys.version_info[1]) - python_full_version = sys.version.split()[0] - os.name = os.name - sys.platform = sys.platform - platform.version = platform.version() - platform.machine = platform.machine() - platform.python_implementation = platform.python_implementation() - a free string, like ``'2.4'``, or ``'win32'`` - extra = (name of requested feature) or None Notice that ``in`` is restricted to strings, meaning that it is not possible to use other sequences like tuples or lists on the right side. The fields that benefit from this marker are: - Requires-Python - Requires-External - Requires-Dist - Setup-Requires-Dist - Provides-Dist - Obsoletes-Dist - Classifier (The `extra` variable is only meaningful for Requires-Dist.) Summary of Differences From PEP 345 =================================== * Metadata-Version is now 1.3. * Values are now expected to be UTF-8. * A payload (containing the description) may appear after the headers. * Added `extra` to environment markers. * Most fields are now optional. * Changed fields: - Description - Project-URL - Requires-Dist * Added fields: - Extension - Provides-Extra - Setup-Requires-Dist References ========== This document specifies version 1.3 of the metadata format. Version 1.0 is specified in PEP 241. Version 1.1 is specified in PEP 314. Version 1.2 is specified in PEP 345. .. [1] reStructuredText markup: http://docutils.sourceforge.net/ .. _`Python Package Index`: http://pypi.python.org/pypi/ .. [2] PEP 301: http://www.python.org/dev/peps/pep-0301/ Appendix ======== Parsing and generating the Metadata 1.3 serialization format using Python 3.3:: # Metadata 1.3 demo from email.generator import Generator from email import header from email.parser import Parser from email.policy import Compat32 from email.utils import _has_surrogates class MetadataPolicy(Compat32): max_line_length = 0 continuation_whitespace = '\t' def _sanitize_header(self, name, value): if not isinstance(value, str): return value if _has_surrogates(value): raise NotImplementedError() else: return value def _fold(self, name, value, sanitize): body = ((self.linesep+self.continuation_whitespace) .join(value.splitlines())) return ''.join((name, ': ', body, self.linesep)) if __name__ == "__main__": import sys import textwrap pkg_info = """\ Metadata-Version: 1.3 Name: package Version: 0.1.0 Summary: A package. Description: Description =========== A description of the package. """ m = Parser(policy=MetadataPolicy()).parsestr(pkg_info) m['License'] = 'GPL' description = m['Description'] description_lines = description.splitlines() m.set_payload(description_lines[0] + '\n' + textwrap.dedent('\n'.join(description_lines[1:])) + '\n') del m['Description'] # Correct if sys.stdout.encoding == 'UTF-8': Generator(sys.stdout, maxheaderlen=0).flatten(m) Copyright ========= This document has been placed in the public domain. .. Local Variables: mode: indented-text indent-tabs-mode: nil sentence-end-double-space: t fill-column: 70 End:

20 111

Why no venv in existing directory?
by Stefan H. Holek 07 Jan '13

07 Jan '13

Hi All, While trying 3.3 beta I found that I cannot use my favorite virtualenv pattern with pyvenv: $ virtualenv . Installing.....done. $ pyvenv . Error: Directory exists: /Users/stefan/sandbox/foo I appreciate that this behavior is documented and was in the PEP from the start: "If the target directory already exists an error will be raised, unless the --clear or --upgrade option was provided." Still, I am curious what the rationale behind this restriction is. For me, being able to "bless" an existing directory with a virtualenv has always been one of its attractions. Thanks, Stefan -- Stefan H. Holek stefan(a)epy.co.at

7 8

PEP 3145 (With Contents)
by Eric Pruitt 25 Dec '12

25 Dec '12

Alright, I will re-submit with the contents pasted. I never use double backquotes as I think them rather ugly; that is the work of an editor or some automated program in the chain. Plus, it also messed up my line formatting and now I have lines with one word on them... Anyway, the contents of PEP 3145: PEP: 3145 Title: Asynchronous I/O For subprocess.Popen Author: (James) Eric Pruitt, Charles R. McCreary, Josiah Carlson Type: Standards Track Content-Type: text/plain Created: 04-Aug-2009 Python-Version: 3.2 Abstract: In its present form, the subprocess.Popen implementation is prone to dead-locking and blocking of the parent Python script while waiting on data from the child process. Motivation: A search for "python asynchronous subprocess" will turn up numerous accounts of people wanting to execute a child process and communicate with it from time to time reading only the data that is available instead of blocking to wait for the program to produce data [1] [2] [3]. The current behavior of the subprocess module is that when a user sends or receives data via the stdin, stderr and stdout file objects, dead locks are common and documented [4] [5]. While communicate can be used to alleviate some of the buffering issues, it will still cause the parent process to block while attempting to read data when none is available to be read from the child process. Rationale: There is a documented need for asynchronous, non-blocking functionality in subprocess.Popen [6] [7] [2] [3]. Inclusion of the code would improve the utility of the Python standard library that can be used on Unix based and Windows builds of Python. Practically every I/O object in Python has a file-like wrapper of some sort. Sockets already act as such and for strings there is StringIO. Popen can be made to act like a file by simply using the methods attached the the subprocess.Popen.stderr, stdout and stdin file-like objects. But when using the read and write methods of those options, you do not have the benefit of asynchronous I/O. In the proposed solution the wrapper wraps the asynchronous methods to mimic a file object. Reference Implementation: I have been maintaining a Google Code repository that contains all of my changes including tests and documentation [9] as well as blog detailing the problems I have come across in the development process [10]. I have been working on implementing non-blocking asynchronous I/O in the subprocess.Popen module as well as a wrapper class for subprocess.Popen that makes it so that an executed process can take the place of a file by duplicating all of the methods and attributes that file objects have. There are two base functions that have been added to the subprocess.Popen class: Popen.send and Popen._recv, each with two separate implementations, one for Windows and one for Unix based systems. The Windows implementation uses ctypes to access the functions needed to control pipes in the kernel 32 DLL in an asynchronous manner. On Unix based systems, the Python interface for file control serves the same purpose. The different implementations of Popen.send and Popen._recv have identical arguments to make code that uses these functions work across multiple platforms. When calling the Popen._recv function, it requires the pipe name be passed as an argument so there exists the Popen.recv function that passes selects stdout as the pipe for Popen._recv by default. Popen.recv_err selects stderr as the pipe by default. "Popen.recv" and "Popen.recv_err" are much easier to read and understand than "Popen._recv('stdout' ..." and "Popen._recv('stderr' ..." respectively. Since the Popen._recv function does not wait on data to be produced before returning a value, it may return empty bytes. Popen.asyncread handles this issue by returning all data read over a given time interval. The ProcessIOWrapper class uses the asyncread and asyncwrite functions to allow a process to act like a file so that there are no blocking issues that can arise from using the stdout and stdin file objects produced from a subprocess.Popen call. References: [1] [ python-Feature Requests-1191964 ] asynchronous Subprocess http://mail.python.org/pipermail/python-bugs-list/2006-December/ 036524.html [2] Daily Life in an Ivory Basement : /feb-07/problems-with-subprocess http://ivory.idyll.org/blog/feb-07/problems-with-subprocess [3] How can I run an external command asynchronously from Python? - Stack Overflow http://stackoverflow.com/questions/636561/how-can-i-run-an-external- command-asynchronously-from-python [4] 18.1. subprocess - Subprocess management - Python v2.6.2 documentation http://docs.python.org/library/subprocess.html#subprocess.Popen.wait [5] 18.1. subprocess - Subprocess management - Python v2.6.2 documentation http://docs.python.org/library/subprocess.html#subprocess.Popen.kill [6] Issue 1191964: asynchronous Subprocess - Python tracker http://bugs.python.org/issue1191964 [7] Module to allow Asynchronous subprocess use on Windows and Posix platforms - ActiveState Code http://code.activestate.com/recipes/440554/ [8] subprocess.rst - subprocdev - Project Hosting on Google Code http://code.google.com/p/subprocdev/source/browse/doc/subprocess.rst?spec=s… [9] subprocdev - Project Hosting on Google Code http://code.google.com/p/subprocdev [10] Python Subprocess Dev http://subdev.blogspot.com/ Copyright: This P.E.P. is licensed under the Open Publication License; http://www.opencontent.org/openpub/. On Tue, Sep 8, 2009 at 22:56, Benjamin Peterson <benjamin(a)python.org> wrote: > 2009/9/7 Eric Pruitt <eric.pruitt(a)gmail.com>: >> Hello all, >> >> I have been working on adding asynchronous I/O to the Python >> subprocess module as part of my Google Summer of Code project. Now >> that I have finished documenting and pruning the code, I present PEP >> 3145 for its inclusion into the Python core code. Any and all feedback >> on the PEP (http://www.python.org/dev/peps/pep-3145/) is appreciated. > > Hi Eric, > One of the reasons you're not getting many response is that you've not > pasted the contents of the PEP in this message. That makes it really > easy for people to comment on various sections. > > BTW, it seems like you were trying to use reST formatting with the > text PEP layout. Double backquotes only mean something in reST. > > > -- > Regards, > Benjamin >

10 26

Python-Dev November 2012