The diff below should reflect changes from the discussion we had last time. Please review. (Some comments may be more appropriate for the other threads I just kicked off.) Cheers, Dirkjan Index: pep-0385.txt =================================================================== --- pep-0385.txt (revision 74294) +++ pep-0385.txt (revision 74296) @@ -59,27 +59,25 @@ often has somewhat unintuitive results for people (though this has been getting better in recent versions of Mercurial). -I'm still a bit on the fence about whether Python should adopt cloned -branches and named branches. Since it usually makes more sense to tag releases -on the maintenance branch, for example, mainline history would not contain -release tags if we used cloned branches. Also, Mercurial 1.2 and 1.3 have the -necessary tools to make named branches less painful (because they can be -properly closed and closed heads are no longer considered in relevant cases). +The current proposal is to use named branches for release branches and adopt +cloned branches for feature branches, with one exception to this rule: the 3.x +branches will be kept in separate clones from the 2.x branches. I think this +provides an optimal hybrid approach for Python's uses of branching. -A disadvantage might be that the used clones will be a good bit larger (since -they essentially contain all other branches as well). This can me mitigated by -keeping non-release (feature) branches in separate clones. Also note that it's -still possible to clone a single named branch from a combined clone, by -specifying the branch as in hg clone http://hg.python.org/main/#2.6-maint. -Keeping the py3k history in a separate clone problably also makes sense. +Differences between named branches and cloned branches: -XXX To do: size comparison for selected separation scenarios. +* Tags in a different (maintenance) clone aren't available in the local clone +* Clones with named branches will be larger, since they contain more data +(The Mercurial book discourages the use of named branches, but it is, in this +respect, somewhat outdated. Named branches have gotten much easier to use +since that comment was written, due to improvements in hg.) + Converting branches ------------------- There are quite a lot of branches in SVN's branches directory. I propose to -clean this up a bit, by employing the following the strategy: +clean this up a bit, by following this basic strategy: * Keep all release (maintenance) branches * Discard branches that haven't been touched in 18 months, unless somone @@ -87,6 +85,21 @@ * Keep branches that have been touched in the last 18 months, unless someone indicates the branch can be deprecated +There's a `branch map`_ available that shows info about each branch: + +* keep-clone means we'll keep that branch in a separate clone +* keep-named means we'll keep that branch as a named branch in one of the clones +* strip means we won't keep that branch +* streamed-merge means that it got merged by committing several new revisions + to the other branch +* merged-r* means the branch got merged in the named revision +* merges? means I haven't checked/found out yet whether that branch was ever + merged +* ? means that your input would be even more helpful than for the other items +* some items have no action yet, feel free to treat that as just '?' + +.. _branch map: http://hg.python.org/pymigr/file/tip/all-branches.txt + Converting tags --------------- @@ -95,8 +108,8 @@ we should keep all release tags, and consider other tags for inclusion based on requests from the developer community. I'd like to consider unifying the release tag naming scheme to make some things more consistent, if people feel -that won't create too many problems. For example, Mercurial itself just uses -'1.2.1' as a tag, where CPython would currently use r121. +that won't create too many problems. The current proposal is to bring old +release tags in line with the current practice of release tag naming. Author map ---------- @@ -119,17 +132,19 @@ possible forms of pattern matching. The current Python repository already includes a rudimentary .hgignore file to help with using the hg mirrors. -It might be useful to have the .hgignore be generated automatically from -svn:ignore properties. This would make sure all historic revisions also have -useful ignore information (though one could argue ignoring isn't really -relevant to just checking out an old revision). +Since the current Python repository already includes a .hgignore file (for use +with hg mirrors), we'll just use that. Generating full history of the file +was debated but deemed impractical (because it's relatively hard with fairly +little gain, since ignoring is less important for older revisions). Revlog reordering ----------------- -As an optional optimization technique, we should consider trying a reordering -pass on the revlogs (internal Mercurial files) resulting from the conversion. -In some cases this results in dramatic decreases in on-disk repository size. +As an optional optimization technique, I have performed a reordering pass on +the revlogs (internal Mercurial files) resulting from the conversion. In some +cases this results in dramatic decreases in on-disk repository size. This +especially makes sense for the manifest (where it really helps out quite a lot) +and oft-edited files like NEWS.txt (with an admittedly smaller effect). Other repositories ------------------ @@ -138,7 +153,14 @@ converted. What other projects in the svn.python.org repository should be converted? Do we want to convert the peps repository? distutils? others? +There's now an initial stab at converting the Jython repository. The current +tip of hgsubversion unfortunately fails at some point. Pending investigation. +Other repositories that would like to converted to Mercurial can announce +themselves to me after the main Python migration is done, and I'll take care +of their needs. + + Infrastructure ============== @@ -165,18 +187,34 @@ lines. Open issue: do we check only the tip after each push, or do we check every commit in a changegroup? -* commit mails: we can leverage the notify extension for this +* commit mails: we can leverage the notify extension for this. Emails will + include diffs for each changeset committed against the repository. * buildbots: both the regular and the community build masters must be notified. Fortunately buildbot includes support for hg. I've also implemented this for Mercurial itself, so I don't expect problems here. * check contributors: in the current setup, all changesets bear the username of - committers, who must have signed the contributor agreement. In a DVCS, the - committers are not necessarily the same people who push, and so we can't - check if the committer is a contributor. We could use a hook to check if the - committer is a contributor if we keep a list of registered contributors. + committers, who must have signed the contributor agreement. We might want to + use a hook to check if the committer is a contributor if we keep a list of + registered contributors. Then, the hook might warn users that push a group + of revisions containing changesets from unknown contributors. +End-of-line conversions +----------------------- + +There has been some discussion about the lack of end-of-line conversion support +in Mercurial. While Mercurial comes with a win32text extension that provides +some basic support for converting end-of-line data on a file-name pattern +basis, the lack of exclusion (for specifying broad rules with exceptions) and +the use of hgrc files (which can't be versioned) make it less than ideal. + +I think the primary line of defense for prevention of inappropriate newlines +should be hooks on the server side which basically turn down any changegroup +or changeset introducing such data. The use of the win32text extension (which +can hopefully be improved/extended to support the usage scenarios mentioned +above) and/or a commit-time hook could be the first line of defense. + hgwebdir -------- @@ -185,7 +223,16 @@ build a quick extension to augment the URL rev parser so that it can also take r[0-9]+ args and come up with the matching hg revision. +roundup +------- +We'll come up with an auto-linking plugin for roundup, which can match a +changeset identifier (possibly with a branch prefix), and link it to the +appropriate revision in the hgwebdir instance. Second, the script above (in +the hgwebdir section) will make sure that old links to revision should continue +to work (by pointing to the hg changeset that reflects the svn revision). + + After migration =============== @@ -222,37 +269,32 @@ .. _wiki: http://www.selenic.com/mercurial/wiki/ .. _parts of the developer FAQ: http://www.python.org/dev/faq/#version-control -Think first, commit later? --------------------------- +Proposed workflow +----------------- -In recent history, old versions of Python have been maintained by a select -group of people backporting patches from trunk to release branches. While -this may not scale so well as the development pace grows, it also runs into -some problems with the current crop of distributed versioning tools. These -tools (I believe similar problems would exist for either git, bzr, or hg, -though some may cope better than others) are based on the idea of a Directed -Acyclic Graph (or DAG), meaning they keep track of relations of changesets. +I propose two workflows for the migration of patches between several branches. -Mercurial itself has a stable branch which is a ''strict'' subset of the -unstable branch. This means that generally all fixes for the stable branch -get committed against the tip of the stable branch, then they get merged into -the unstable branch (which already contains the parent of the new cset). This -provides a largely frictionless environment for moving changes from stable to -unstable branches. Mistakes, where a change that should go on stable goes on -unstable first, do happen, but they're usually easy to fix. That can be done by -copying the change over to the stable branch, then trivial-merging with -unstable -- meaning the merge in fact ignores the parent from the stable -branch). +For migration within 2.x or 3.x branches, I propose a patch always gets +committed to the oldest branch where it applies first. Then, the resulting +changeset can be merged using hg merge to all newer branches within that +series (2.x or 3.x). If it does not apply as-is to the newer branch, hg revert +can be used to easily revert to the new-branch-native head, patch in some +alternative version of the patch (or none, if it's not applicable), then commit +the merge. The premise here is that all changesets from an older branch within +the series are eventually merged to all newer branches within the series. -This strategy means a little more work for regular committers, because they -have to think about whether their change should go on stable or unstable; they -may even have to ask someone else (the RM) before committing. But it also -relieves a dedicated group of committers of regular backporting duty, in -addition to making it easier to work with the tool. +The upshot is that this provides for the most painless merging procedure. The +downside is that in the general case, people have to think about the oldest +branch to which the patch should be applied before actually applying it. -Now would be a good time to consider changing strategies in this regard, -although it would be relatively easy to switch to such a model later on. +For migration between 2.x and 3.x branches (which should all be in the same +direction, though I'm not sure what direction is most appropriate here), +changesets should be transplanted (not merged) in some other way. The +transplant extension, import/export and bundle/unbundle work equally well here. +Choosing this approach allows 3.x not to carry all of the 2.x history-since-it- +was-branched, meaning the clone is not as big and the merges not as complicated. + The future of Subversion ------------------------ @@ -281,7 +323,9 @@ I propose that the revision identifier will be the short version of hg's revision hash, for example 'dd3ebf81af43', augmented with '+' (instead of 'M') if the working directory from which it was built was modified. This mirrors -the output of the hg id command, which is intended for this kind of usage. +the output of the hg id command, which is intended for this kind of usage. The +sys.subversion value will also be renamed to sys.mercurial to reflect the +change in VCS. For the tag/branch identifier, I propose that hg will check for tags on the currently checked out revision, use the tag if there is one ('tip' doesn't