I'm about to be offline for a few days, so I wanted to get my current draft PEPs out for people can read and review. I don't believe there is a lot of change as a result of either PEP, but the impact of what change there is needs to be weighed against the benefits. We've already had some thorough discussion on this one and failed to reach agreement on whether we can make this change in 3.6 or if it needs a deprecation cycle that is more visible than the one we started in 3.3. In the latter case, we need to determine how visible that should be (i.e. warnings visible by default, visible for non-Windows platforms, value-dependent warnings/errors, etc.). IMHO, the argument about having the change be on-by-default or off-by-default is irrelevant until we decide on the deprecation issue, at which point it is obvious what the default should be. See https://bugs.python.org/issue27781 for the current proposed patch. I do need to update it in order to merge against default it seems (work for my upcoming flight). Cheers, Steve --- https://github.com/python/peps/blob/master/pep-0529.txt --- PEP: 529 Title: Change Windows filesystem encoding to UTF-8 Version: $Revision$ Last-Modified: $Date$ Author: Steve Dower Status: Draft Type: Standards Track Content-Type: text/x-rst Created: 27-Aug-2016 Post-History: 01-Sep-2016 Abstract ======== Historically, Python uses the ANSI APIs for interacting with the Windows operating system, often via C Runtime functions. However, these have been long discouraged in favor of the UTF-16 APIs. Within the operating system, all text is represented as UTF-16, and the ANSI APIs perform encoding and decoding using the active code page. This PEP proposes changing the default filesystem encoding on Windows to utf-8, and changing all filesystem functions to use the Unicode APIs for filesystem paths. This will not affect code that uses strings to represent paths, however those that use bytes for paths will now be able to correctly round-trip all valid paths in Windows filesystems. Currently, the conversions between Unicode (in the OS) and bytes (in Python) were lossy and would fail to round-trip characters outside of the user's active code page. Notably, this does not impact the encoding of the contents of files. These will continue to default to locale.getpreferredencoding (for text files) or plain bytes (for binary files). This only affects the encoding used when users pass a bytes object to Python where it is then passed to the operating system as a path name. Background ========== File system paths are almost universally represented as text with an encoding determined by the file system. In Python, we expose these paths via a number of interfaces, such as the ``os`` and ``io`` modules. Paths may be passed either direction across these interfaces, that is, from the filesystem to the application (for example, ``os.listdir()``), or from the application to the filesystem (for example, ``os.unlink()``). When paths are passed between the filesystem and the application, they are either passed through as a bytes blob or converted to/from str using ``os.fsencode()`` or ``sys.getfilesystemencoding()``. The result of encoding a string with ``sys.getfilesystemencoding()`` is a blob of bytes in the native format for the default file system. On Windows, the native format for the filesystem is utf-16-le. The recommended platform APIs for accessing the filesystem all accept and return text encoded in this format. However, prior to Windows NT (and possibly further back), the native format was a configurable machine option and a separate set of APIs existed to accept this format. The option (the "active code page") and these APIs (the "*A functions") still exist in recent versions of Windows for backwards compatibility, though new functionality often only has a utf-16-le API (the "*W functions"). In Python, str is recommended because it can correctly round-trip all characters used in paths (on POSIX with surrogateescape handling; on Windows because str maps to the native representation). On Windows bytes cannot round-trip all characters used in paths, as Python internally uses the *A functions and hence the encoding is "whatever the active code page is". Since the active code page cannot represent all Unicode characters, the conversion of a path into bytes can lose information without warning or any available indication. As a demonstration of this:: >>> open('test\uAB00.txt', 'wb').close() >>> import glob >>> glob.glob('test*') ['test\uab00.txt'] >>> glob.glob(b'test*') [b'test?.txt'] The Unicode character in the second call to glob has been replaced by a '?', which means passing the path back into the filesystem will result in a ``FileNotFoundError``. The same results may be observed with ``os.listdir()`` or any function that matches the return type to the parameter type. While one user-accessible fix is to use str everywhere, POSIX systems generally do not suffer from data loss when using bytes exclusively as the bytes are the canonical representation. Even if the encoding is "incorrect" by some standard, the file system will still map the bytes back to the file. Making use of this avoids the cost of decoding and reencoding, such that (theoretically, and only on POSIX), code such as this may be faster because of the use of `b'.'` compared to using `'.'`:: >>> for f in os.listdir(b'.'): ... os.stat(f) ... As a result, POSIX-focused library authors prefer to use bytes to represent paths. For some authors it is also a convenience, as their code may receive bytes already known to be encoded correctly, while others are attempting to simplify porting their code from Python 2. However, the correctness assumptions do not carry over to Windows where Unicode is the canonical representation, and errors may result. This potential data loss is why the use of bytes paths on Windows was deprecated in Python 3.3 - all of the above code snippets produce deprecation warnings on Windows. Proposal ======== Currently the default filesystem encoding is 'mbcs', which is a meta-encoder that uses the active code page. However, when bytes are passed to the filesystem they go through the *A APIs and the operating system handles encoding. In this case, paths are always encoded using the equivalent of 'mbcs:replace' - we have no ability to change this (though there is a user/machine configuration option to change the encoding from CP_ACP to CP_OEM, so it won't necessarily always match mbcs...) This proposal would remove all use of the *A APIs and only ever call the *W APIs. When Windows returns paths to Python as str, they will be decoded from utf-16-le and returned as text (in whatever the minimal representation is). When Windows returns paths to Python as bytes, they will be decoded from utf-16-le to utf-8 using surrogatepass (Windows does not validate surrogate pairs, so it is possible to have invalid surrogates in filenames). Equally, when paths are provided as bytes, they are decoded from utf-8 into utf-16-le and passed to the *W APIs. The use of utf-8 will not be configurable, with the possible exception of a "legacy mode" environment variable or X-flag. surrogateescape does not apply here, as the concern is not about retaining non-sensical bytes. Any path returned from the operating system will be valid Unicode, while bytes paths created by the user may raise a decoding error (currently these would raise ``OSError`` or a subclass). The choice of utf-8 bytes (as opposed to utf-16-le bytes) is to ensure the ability to round-trip without breaking the functionality of the ``os.path`` module, which assumes an ASCII-compatible encoding. Using utf-16-le as the encoding is more pure, but will cause more issues than are resolved. This change would also undeprecate the use of bytes paths on Windows. No change to the semantics of using bytes as a path is required - as before, they must be encoded with the encoding specified by ``sys.getfilesystemencoding()``. Specific Changes ================ Update sys.getfilesystemencoding -------------------------------- Remove the default value for ``Py_FileSystemDefaultEncoding`` and set it in ``initfsencoding()`` to utf-8, or if the legacy-mode switch is enabled to mbcs. Update the implementations of ``PyUnicode_DecodeFSDefaultAndSize`` and ``PyUnicode_EncodeFSDefault`` to use the standard utf-8 codec with surrogatepass error mode, or if the legacy-mode switch is enabled the code page codec with replace error mode. Update path_converter --------------------- Update the path converter to always decode bytes or buffer objects into text using ``PyUnicode_DecodeFSDefaultAndSize``. Change the ``narrow`` field from a ``char*`` string into a flag that indicates whether the original object was bytes. This is required for functions that need to return paths using the same type as was originally provided. Remove unused ANSI code ----------------------- Remove all code paths using the ``narrow`` field, as these will no longer be reachable by any caller. These are only used within ``posixmodule.c``. Other uses of paths should have use of bytes paths replaced with decoding and use of the *W APIs. Add legacy mode --------------- Add a legacy mode flag, enabled by the environment variable ``PYTHONLEGACYWINDOWSFSENCODING``. When this flag is set, the default filesystem encoding is set to mbcs rather than utf-8, and the error mode is set to 'replace' rather than 'strict'. The ``path_converter`` will continue to decode to wide characters and only *W APIs will be called, however, the bytes passed in and received from Python will be encoded the same as prior to this change. Undeprecate bytes paths on Windows ---------------------------------- Using bytes as paths on Windows is currently deprecated. We would announce that this is no longer the case, and that paths when encoded as bytes should use whatever is returned from ``sys.getfilesystemencoding()`` rather than the user's active code page. Rejected Alternatives ===================== Use strict mbcs decoding ------------------------ This is essentially the same as the proposed change, but instead of changing ``sys.getfilesystemencoding()`` to utf-8 it is changed to mbcs (which dynamically maps to the active code page). This approach allows the use of new functionality that is only available as *W APIs and also detection of encoding/decoding errors. For example, rather than silently replacing Unicode characters with '?', it would be possible to warn or fail the operation. Compared to the proposed fix, this could enable some new functionality but does not fix any of the problems described initially. New runtime errors may cause some problems to be more obvious and lead to fixes, provided library maintainers are interested in supporting Windows and adding a separate code path to treat filesystem paths as strings. Making the encoding mbcs without strict errors is equivalent to the legacy-mode switch being enabled by default. This is a possible course of action if there is significant breakage of actual code and a need to extend the deprecation period, but still a desire to have the simplifications to the CPython source. Make bytes paths an error on Windows ------------------------------------ By preventing the use of bytes paths on Windows completely we prevent users from hitting encoding issues. However, the motivation for this PEP is to increase the likelihood that code written on POSIX will also work correctly on Windows. This alternative would move the other direction and make such code completely incompatible. As this does not benefit users in any way, we reject it. Make bytes paths an error on all platforms ------------------------------------------ By deprecating and then disable the use of bytes paths on all platforms we prevent users from hitting encoding issues regardless of where the code was originally written. This would require a full deprecation cycle, as there are currently no warnings on platforms other than Windows. This is likely to be seen as a hostile action against Python developers in general, and as such is rejected at this time. Code that may break =================== The following code patterns may break or see different behaviour as a result of this change. Note that all of these examples produce deprecation warnings on Python 3.3 and later. Not managing encodings across boundaries ---------------------------------------- Code that does not manage encodings when crossing protocol boundaries may currently be working by chance, but could encounter issues when either encoding changes. For example:: filename = open('filename_in_mbcs.txt', 'rb').read() text = open(filename, 'r').read() To correct this code, the encoding of the bytes in ``filename`` should be specified, either when reading from the file or before using the value:: # Fix 1: Open file as text filename = open('filename_in_mbcs.txt', 'r', encoding='mbcs').read() text = open(filename, 'r').read() # Fix 2: Decode path filename = open('filename_in_mbcs.txt', 'rb').read() text = open(filename.decode('mbcs'), 'r').read() Explicitly using 'mbcs' ----------------------- Code that explicitly encodes text using 'mbcs' before passing to file system APIs. For example:: filename = open('files.txt', 'r').readline() text = open(filename.encode('mbcs'), 'r') To correct this code, the string should be passed without explicit encoding, or should use ``os.fsencode()``:: # Fix 1: Do not encode the string filename = open('files.txt', 'r').readline() text = open(filename, 'r') # Fix 2: Use correct encoding filename = open('files.txt', 'r').readline() text = open(os.fsencode(filename), 'r') Copyright ========= This document has been placed in the public domain.