No, 2 times something is greater than something. Something over something
is 1.
If we change the division axiom to be piecewise with an exception only for
infinity, we could claim that any problem involving division of a symbol is
unsolvable because the symbol could be infinity.
This is incorrect:
x / 2 is unsolvable because x could be infinity
x / 2 > x / 3 (where x > 0; Z+) is indeterminate because if x is infinity,
then they are equal.
assert 1 / 0 != 2 / 0
assert 2*inf > inf
assert inf / inf == 1
I should have said capricious (not specious). I'm again replying to the
main thread because this is relevant: there would need to be changes to
tests in order to return (scalar times) infinity instead of
ZeroDivisionError.
We should not discard the scalar in scalar*infinity expressions.
On Sun, Oct 11, 2020, 5:18 PM Chris Angelico

On Mon, Oct 12, 2020 at 8:07 AM Wes Turner

wrote: So you're arguing that the scalar is irrelevant? That `2*inf == inf`?

I disagree because: ```2*inf > inf```

On what basis? If you start by assuming that infinity is a number, then sure, you're going to deduce that double it must be a greater number. But you're just concluding your own assumption, not proving anything.

And:

```# Given that: inf / inf = 1

Is that the case?

from math import inf inf / inf nan

# When we solve for symbol x: 2*inf*x = inf 2*x = 1 x = 1/2

# If we discard the scalar instead: 2*inf*x = inf inf*x = inf x = 1

# I think it's specious to argue that there are infinity solutions; that axioms of symbolic mathematics do not apply because infinity ```

Once again, you start by assuming that infinity is a number, and that you can divide by it (which is what happens when you "solve for x" by removing the infinities). You can't prove something by first assuming it.

"Infinity" isn't a number. In the IEEE 754 system, it is a value, but it's still not a number (although it's distinct from Not A Number, just to confuse everyone). In mathematics, it's definitely not an actual number or value.

ChrisA ______________________________

On Sun, Oct 11, 2020 at 5:04 PM Wes Turner

So you're arguing that the scalar is irrelevant? That `2*inf == inf`?

I disagree because: ```2*inf > inf```

And:

```# Given that: inf / inf = 1

# When we solve for symbol x: 2*inf*x = inf 2*x = 1 x = 1/2

# If we discard the scalar instead: 2*inf*x = inf inf*x = inf x = 1

# I think it's specious to argue that there are infinity solutions; that axioms of symbolic mathematics do not apply because infinity ```

This is relevant to the (now-forked) main thread if the plan is to return inf/-inf/+inf instead of raising ZeroDivisionError; so I'm replying to the main thread.

On Sun, Oct 11, 2020, 4:10 PM Chris Angelico

wrote: On Mon, Oct 12, 2020 at 5:06 AM Wes Turner wrote: SymPy ComplexInfinity, 1/0 < 2/0, *tests* for symbolic results

FWIW, SymPy (a CAS: Computer Algebra System) has Infinity,

NegativeInfinity, ComplexInfinity.

Regarding a symbolic result for 1/0:

If 1/0 is infinity (because 0 goes into 1 infinity times), is 2/0 2*inifnity (because 0 goes into 2 2 times more than into 1)

If you try to treat "infinity" as an actual number, you're inevitably going to run into paradoxes. Consider instead: 1/x tends towards +∞ as x tends towards 0 (if x starts out positive), therefore we consider that 1/0 is +∞. By that logic, the limit of 2/0 is the exact same thing. It's still not a perfect system, and division by zero is always going to cause problems, but it's far less paradoxical if you don't try to treat 2/0 as different from 1/0 :)

BTW, you're technically correct, in that 2/0 would be the same as 2 * (whatever 1/0 is), but that's because 2*x tends towards +∞ as x tends towards +∞, meaning that 2*∞ is also ∞.

ChrisA

On Sun, Oct 11, 2020 at 2:03 PM Wes Turner

wrote: SymPy ComplexInfinity, 1/0 < 2/0, *tests* for symbolic results

FWIW, SymPy (a CAS: Computer Algebra System) has Infinity, NegativeInfinity, ComplexInfinity.

Regarding a symbolic result for 1/0:

If 1/0 is infinity (because 0 goes into 1 infinity times), is 2/0 2*inifnity (because 0 goes into 2 2 times more than into 1)

A proper CAS really is advisable. FWIU, different CAS have different outputs for the above problem (most just disregard the scalar because it's infinity so who care if that cancels out later).

Where are the existing test cases for arithemetic calculations with (scalar times) IEEE-754 int, +inf, or -inf as the output?

On Tue, Sep 15, 2020 at 1:54 AM David Mertz

wrote: Thanks so much Ben for documenting all these examples. I've been frustrated by the inconsistencies, but hasn't realized all of those you note.

It would be a breaking change, but I'd really vastly prefer if almost all of those OverflowErrors and others were simply infinities. That's much closer to the spirit of IEEE-754.

The tricky case is 1./0. Division is such an ordinary operation, and it's so easy to get zero in a variable accidentally. That one still feels like an exception, but yes 1/1e-323 vs. 1/1e-324 would them remain a sore spot.

Likewise, a bunch of operations really should be NaN that are exceptions now.

On Mon, Sep 14, 2020, 5:26 PM Ben Rudiak-Gould

wrote: On Mon, Sep 14, 2020 at 9:36 AM Stephen J. Turnbull < turnbull.stephen.fw@u.tsukuba.ac.jp> wrote:

IEEE 754 is a very practical standard -- it was well designed, and is widely used and successful. It is not perfect, and in certain use cases, it may not be the best choice. But it's a really good idea to keep to

Christopher Barker writes: that

standard by default.

I feel the same way; I really wish Python was better about following IEEE 754.

I agree, but Python doesn't. It raises on some infs (generally

speaking, true infinities), and returns inf on others (generally speaking, overflows).

It seems to be very inconsistent. From testing just now:

* math.lgamma(0) raises "ValueError: math domain error"

* math.exp(1000) raises "OverflowError: math range error"

* math.e ** 1000 raises "OverflowError: (34, 'Result too large')"

* (math.e ** 500) * (math.e ** 500) returns inf

* sum([1e308, 1e308]) returns inf

* math.fsum([1e308, 1e308]) raises "OverflowError: intermediate overflow in fsum"

* math.fsum([1e308, inf, 1e308]) returns inf

* math.fsum([inf, 1e308, 1e308]) raises "OverflowError: intermediate overflow in fsum"

* float('1e999') returns inf

* float.fromhex('1p1024') raises "OverflowError: hexadecimal value too large to represent as a float"

I get the impression that little planning has gone into this. There's no consistency in the OverflowError messages. 1./0. raises ZeroDivisionError which isn't a subclass of OverflowError. lgamma(0) raises a ValueError, which isn't even a subclass of ArithmeticError. The function has a pole at 0 with a well-defined two-sided limit of +inf. If it isn't going to return +inf then it ought to raise ZeroDivisionError, which should obviously be a subclass of OverflowError.

Because of the inconsistent handling of overflow, many functions aren't even monotonic. exp(2*x) returns a float for x <= 709.782712893384, raises OverflowError for 709.782712893384 < x <= 8.98846567431158e+307, and returns a float for x > 8.98846567431158e+307.

1./0. is not a true infinity. It's the reciprocal of a number that may have underflowed to zero. It's totally inconsistent to return inf for 1/1e-323 and raise an exception for 1/1e-324, as Python does.

_______________________________________________ Python-ideas mailing list -- python-ideas@python.org To unsubscribe send an email to python-ideas-leave@python.org https://mail.python.org/mailman3/lists/python-ideas.python.org/ Message archived at https://mail.python.org/archives/list/python-ideas@python.org/message/TXEZTN... Code of Conduct: http://python.org/psf/codeofconduct/

_______________________________________________ Python-ideas mailing list -- python-ideas@python.org To unsubscribe send an email to python-ideas-leave@python.org https://mail.python.org/mailman3/lists/python-ideas.python.org/ Message archived at https://mail.python.org/archives/list/python-ideas@python.org/message/GLUX5W... Code of Conduct: http://python.org/psf/codeofconduct/