![](https://secure.gravatar.com/avatar/3c1ee6d3dae02672131ed7fe18ff7455.jpg?s=120&d=mm&r=g)
Hello,
I work on an aerothermal problem and i need to impose a robin boundary condition.
Do anyone know if this boundary condition is implemented in sfepy ?
Thanks,
![](https://secure.gravatar.com/avatar/27f6b03a726ccff3f7a5007b1df6bf8c.jpg?s=120&d=mm&r=g)
This is very similar to the slip (Navier) boundary condition, see the example [1]. Essentially, just add a boundary integral such as that over Gamma_2 (dw_surface_dot, with the beta coefficient to 1) and then add a Neumann boundary condition (dw_surface_integrate term(?)). Tell me the exact form of the Robin condition if you need more help.
r.
[1] http://sfepy.org/doc-devel/examples/navier_stokes/stokes_slip_bc.html
On 05/13/2016 02:57 PM, Nicolas DELAN wrote:
Hello,
I work on an aerothermal problem and i need to impose a robin boundary condition.
Do anyone know if this boundary condition is implemented in sfepy ?
Thanks,
![](https://secure.gravatar.com/avatar/3c1ee6d3dae02672131ed7fe18ff7455.jpg?s=120&d=mm&r=g)
Hi,
First thanks for your help and sorry for the time of response,
My problem is the following :
I have a turbine blade in a steady flow, the heat flux and the temperature at the interface are given by a CFD solver called SU2. So now i need to implement the robin boundary condition. In my case the expression is the following :
<https://lh3.googleusercontent.com/-Zo6LzlAt6nA/V2FDcv7cheI/AAAAAAAASNo/11-VwwpuxbEqk8H-qqje_vIqNEkrqZG3gCLcB/s1600/Capture.PNG> where the indice I represent the Interface, n the number of iteration, f the fluid field and s the solid field. The h coefficient is calculated at each iteration with the CFD data. The fourier condition is the other name of the robin boundary condition.
Le vendredi 13 mai 2016 16:53:40 UTC+2, Robert Cimrman a écrit :
This is very similar to the slip (Navier) boundary condition, see the example [1]. Essentially, just add a boundary integral such as that over Gamma_2 (dw_surface_dot, with the beta coefficient to 1) and then add a Neumann boundary condition (dw_surface_integrate term(?)). Tell me the exact form of the Robin condition if you need more help.
r.
[1] http://sfepy.org/doc-devel/examples/navier_stokes/stokes_slip_bc.html
On 05/13/2016 02:57 PM, Nicolas DELAN wrote:
Hello,
I work on an aerothermal problem and i need to impose a robin boundary condition.
Do anyone know if this boundary condition is implemented in sfepy ?
Thanks,
participants (2)
-
Nicolas DELAN
-
Robert Cimrman