I should chime in and say that my pasteboard page was not setup after the bootstrapp'ing - the page just 404'ed. To fix this I just did a test commit to the pasteboard

yt pasteboard --desc="This is just a test" test.py

and it worked fine. So, it _is_ set up with BB, as far as I can tell, but the page just shows up as 404 until something is checked in, or following Briton's elegant solution of just doing a 'hg push'

Chris
On Mar 21, 2011 4:03pm, Britton Smith <brittonsmith@gmail.com> wrote:
> I had a similar experience to Chris's.  I gave the script my bitbucket username, but on the first try it wanted to use my system username, which is also not the same.  Just like for Chris, it got it right the second time.
>
>
> As one of original nay-sayers on this, I have to say I liked everything about how this worked.  I especially think the pasteboard is really great.  The one thing that wasn't very clear to me was that I had to do an 'hg push' from within my pasteboard repo to get the page set up on bitbucket.  Could a note of this be made in the script after this step is done? 
>
>
> Since I'm wrong so often, it's quite easy for me to admit that I was wrong about this one.
>
> Nice job, Matt.
>
> Britton
>
> On Mon, Mar 21, 2011 at 2:49 PM, Chris Malone chris.m.malone@gmail.com> wrote:
>
> Hi Matt,
>
> I pulled from your repo and ran the
>
> yt bootstrap_dev
>
> method.  Everything was going fine - it checked out yt-supplemental, looked at my .hgrc and added my BB username, etc - until it wanted to set up my pasteboard.  It seems like when it made the hgbb._bb_apicall, it used my system user name, which is different from my BB username:
>
>
>
> -------------------------------------------------------------------------------------------------------------------------------------------------
> I am now going to create the repository:
>      chrismalone.bitbucket.org
>
>
> on BitBucket.org.  This will set up the domain
>      http://chrismalone.bitbucket.org
> which will point to the current contents of the repo.
>
> Press enter to go on, Ctrl-C to exit.
>
>
> using system user 'cmalone' as usernamehttp authorization required
> realm: None
> user: cmalone
> password:
> -------------------------------------------------------------------------------------------------------------------------------------------------
>
>
>
> Obviously this failed; however, when I ran this a second time it picked up my correct BB username:
>
> -------------------------------------------------------------------------------------------------------------------------------------------------
>
>
> I am now going to create the repository:
>      chrismalone.bitbucket.org
> on BitBucket.org.  This will set up the domain
>      http://chrismalone.bitbucket.org
>
>
> which will point to the current contents of the repo.
>
> Press enter to go on, Ctrl-C to exit.
> http authorization required
> realm: None
> user: ChrisMalone
> password: -------------------------------------------------------------------------------------------------------------------------------------------------
>
>
>
> and then it worked fine.  I can now use the pasteboard facilities, which are pretty cool!
>
> I think for the bootstrap utility to be a bit more user-friendly, you might want to add a bit more description about why the user cares about the various components that are about to be installed  For example, the user probably doesn't know that the yt-supplemental repo is where all the hgbb or pasteboard stuff is contained or why they should want a BB account if they don't have one already.  This might be too much information to have in the bootstrap script itself, so perhaps provide a link to a page where these things are mentioned.
>
>
>
> Anyhow, aside from the above (minor) points, I really like the bootstrap utility.  You've gone out of your way to make sure nothing was done without the user's permission.
>
> +1
>
>
> Chris
>
>
>
>
>
> On Mon, Mar 21, 2011 at 12:34 AM, Matthew Turk matthewturk@gmail.com> wrote:
>
>
> Hi all,
>
>
>
> Last week we had a conversation about a bootstrap script, where the
>
> feel of the room was either lukewarm or positive.  Mostly people
>
> seemed to think it was ill-motivated or would take too many liberties.
>
>  Over the last week, in the evenings etc I've created a bootstrap
>
> script for development, which overall I think is pretty
>
> well-motivated.  The script accomplishes the following things, each of
>
> which requests for confirmation before going on.  It uses a modified
>
> iniparse library so that any modifications to any ini files are made
>
> in a non-destructive manner.  It accomplishes these tasks:
>
>
>
> 1) Ensure username is set up in ~/.hgrc
>
> 2) Ensure that the cedit and hgbb are enabled
>
> 3) Asks for and if needed creates a username on BitBucket
>
> 4) Sets up hgbb
>
> 5) Creates a pasteboard repository
>
>
>
> The diff is here:
>
>
>
> https://bitbucket.org/yt_analysis/yt/compare/MatthewTurk/yt..default
>
>
>
> You can pull from my repo:
>
>
>
> hg pull https://bitbucket.org/MatthewTurk/yt/
>
>
>
> (But note the comment below about yt-supplemental)
>
>
>
> There are a couple things in this:
>
>
>
>  * I wrote up something called a "pasteboard" this last week for more
>
> permanent mini-pastes of info.  This uses mercurial to create/destroy
>
> items in it.  You can see some examples here:
>
>
>
> http://matthewturk.bitbucket.org/
>
> http://jsoishi.bitbucket.org/
>
> http://samskillman.bitbucket.org/
>
>
>
> This was born out of the SFLC thing that happened on the mailing list,
>
> when Sam emailed his script.  I thought, wouldn't it be nice if we
>
> were older, and we had a pasteboard that was persistent, with
>
> descriptions, which we could programmatically upload/download from.
>
> This adds the new commands:
>
>
>
> yt pasteboard --desc="Something" some_file.py
>
> yt pastegrab PASTE_ID USERNAME
>
>
>
> This automatically tosses it up.  You get embed codes and some
>
> highlights, but it's just easier to keep these things around than the
>
> pastebin.
>
>
>
>  * The idea of enabling hgbb, cedit and ensuring a bitbucket user is
>
> because I am of the opinion we should make it easier to fork the
>
> repository to make changes.  If those three are enabled, I believe a
>
> command-line forking, editing of sources and so on, are all within our
>
> reach.
>
>
>
>  * This bootstrap script requires that the yt-supplemental repo be
>
> checked out in ${YT_DEST}/src/ .  This repo is actually kind of cool,
>
> in that it is a subrepo setup, and it pulls in a couple external
>
> libraries that we can maintain.  Right now it grabs the docs, the
>
> cookbook, and the extensions mentioned above.  This repo is now pulled
>
> in the current install_script.sh.
>
>
>
> Anyway, I am submitting this to the list to get some review.  There
>
> may be errors, but I have tested it quite a bit.  It also informs the
>
> user of what it's about to do and requires the user hit enter.  At one
>
> point it even asks for a yes or no.
>
>
>
> The reason I am interested in this is that I think the idea of
>
> bootstrapping people into a development environment is, generally, a
>
> good idea.  Particularly because some things -- like the pasteboard,
>
> like forking, like contributing changes -- should be made really easy
>
> and have the potential for a very high payoff.  I hope I've motivated
>
> things a bit better.
>
>
>
> I was hoping that before I merged it I could get someone else to read
>
> it over, maybe a couple people even to test it, and to get a good feel
>
> for whether this is worthwhile or whether I should pull these changes
>
> and just ignore the idea.  What do people think?
>
>
>
> Thanks,
>
>
>
> Matt
>
> _______________________________________________
>
> Yt-dev mailing list
>
> Yt-dev@lists.spacepope.org
>
> http://lists.spacepope.org/listinfo.cgi/yt-dev-spacepope.org
>
>
>
>
>
>
>
> _______________________________________________
>
> Yt-dev mailing list
>
> Yt-dev@lists.spacepope.org
>
> http://lists.spacepope.org/listinfo.cgi/yt-dev-spacepope.org
>
>
>
>
>