Dear yt:
I am currently having issues with yt.loadtxt. It gives me the following
error. I am the getting the following error
File "numpy_loadtxt.py", line 3, in <module>
b = yt.loadtxt("u25.dat")
AttributeError: 'module' object has no attribute 'loadtxt'
I am currently using version 3.2.2
yt module located at:
/state/partition1/anaconda/lib/python2.7/site-packages
The current version and changeset for the code is:
---
Version = 3.2.2
Changeset = None
---
I am using the example for loadtxt as mentioned here
http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-and-Loading-YTArrays-to/from-disk
Thanks in advance
On Mon, Jan 4, 2016 at 11:10 AM, <yt-users-request@lists.spacepope.org>
wrote:
> Send yt-users mailing list submissions to
> yt-users@lists.spacepope.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
> or, via email, send a message with subject or body 'help' to
> yt-users-request@lists.spacepope.org
>
> You can reach the person managing the list at
> yt-users-owner@lists.spacepope.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of yt-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Issue with loading data (John ZuHone)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 4 Jan 2016 12:10:11 -0500
> From: John ZuHone <jzuhone@gmail.com>
> To: Discussion of the yt analysis package
> <yt-users@lists.spacepope.org>
> Subject: Re: [yt-users] Issue with loading data
> Message-ID: <BF0E1EAF-D72D-483C-98FC-3C08C9968667@gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> yt.loadtxt only works in the current development version of the 3.x series
> of yt.
>
> John ZuHone
> Harvard-Smithsonian Center for Astrophysics
>
> 60 Garden St., MS-67
> Cambridge, MA 02138
> (w) 617-496-1816
> (m) 781-708-5004
> jzuhone@cfa.harvard.edu
> jzuhone@gmail.com
> http://www.jzuhone.com
>
> > On Jan 4, 2016, at 12:06 PM, Sushilkumar <sushil.sush19us@gmail.com>
> wrote:
> >
> > Dear yt:
> >
> > Can I use yt.loadtxt for yt version 2.6.1?
> > Are there examples for "loading from file" using numpy array? The link
> below formats as numpy array but not from file.
> >
> >
> http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=load_uniform_grid
> >
> >
> >
> >> On Mon, Jan 4, 2016 at 10:52 AM, <yt-users-request@lists.spacepope.org>
> wrote:
> >> Send yt-users mailing list submissions to
> >> yt-users@lists.spacepope.org
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
> >> or, via email, send a message with subject or body 'help' to
> >> yt-users-request@lists.spacepope.org
> >>
> >> You can reach the person managing the list at
> >> yt-users-owner@lists.spacepope.org
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of yt-users digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. Re: problem with yt update to 3.0 (John ZuHone)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Mon, 4 Jan 2016 11:52:03 -0500
> >> From: John ZuHone <jzuhone@gmail.com>
> >> To: Discussion of the yt analysis package
> >> <yt-users@lists.spacepope.org>
> >> Subject: Re: [yt-users] problem with yt update to 3.0
> >> Message-ID: <E58E10EE-846A-4595-87EC-47CAF9CDA022@gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> In the current development version of yt there is also yt.loadtxt,
> which is essentially a wrapper for numpy.loadtxt which also accepts unit
> information.
> >>
> >> See
> http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-and-Loading-YTArrays-to/from-disk
> <
> http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-and-Loading-YTArrays-to/from-disk
> >
> >>
> >> > On Dec 30, 2015, at 12:01 PM, Sushilkumar <sushil.sush19us@gmail.com>
> wrote:
> >> >
> >> > Dear Nathan:
> >> >
> >> > As per your advice I am trying to load my text file to numpy array.
> But there are two ways to so using numpy.loadtxt and numpy.fromfile. Could
> you suggest which of them is more efficient for large files and more
> suitable for yt (if any)?
> >> >
> >> > Thanks in advance
> >> >
> >> > On Sat, Dec 26, 2015 at 6:43 PM, Sushilkumar Sreekumar <
> sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> wrote:
> >> > Dear Nathan:
> >> >
> >> >
> >> >
> >> > Thank you for your help
> >> >
> >> >
> >> >
> >> > --
> >> > SK2
> >> >
> >> > "Claiming that something can move faster than light is a good
> conversation-stopper in physics. People edge away from you in cocktail
> parties; friends never return phone calls. You just don?t mess with Albert
> Einstein."
> >> >
> >> >
> >> >
> >> >
> >> > From: Nathan Goldbaum <mailto:nathan12343@gmail.com>
> >> > Sent: Saturday, December 26, 2015 12:34 PM
> >> > To: Sushilkumar <mailto:sushil.sush19us@gmail.com>
> >> > Cc: Discussion of the yt analysis package <mailto:
> yt-users@lists.spacepope.org>
> >> > Subject: Re: [yt-users] problem with yt update to 3.0
> >> >
> >> >
> >> >
> >> > If you can format your data as numpy arrays, there are examples of
> how to load your data into yt here:
> >> >
> >> >
> >> >
> >> >
> http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=load_uniform_grid
> <
> http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=load_uniform_grid
> >
> >> >
> >> >
> >> > yt (2.6.1 or newer) does not support i/o from arbitrary text files.
> >> >
> >> >
> >> >
> >> > On Sat, Dec 26, 2015 at 12:30 PM, Sushilkumar <
> sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> wrote:
> >> >
> >> > Dear Nathan:
> >> >
> >> > I will try it and let you know. In the meanwhile, could you let me
> know if yt supports loading text file for version 2.6.1? If so could you
> point me to examples for the same.
> >> >
> >> > Thanks in advance
> >> >
> >> >
> >> >
> >> > On Sat, Dec 26, 2015, 11:44 Nathan Goldbaum <nathan12343@gmail.com
> <mailto:nathan12343@gmail.com>> wrote:
> >> >
> >> > This is happening because python is unable to link against an openSSL
> library.
> >> >
> >> >
> >> >
> >> > Can you try using the get_yt.sh script install of the
> install_script.sh script:
> >> >
> >> >
> >> >
> >> >
> https://bitbucket.org/yt_analysis/yt/raw/d9502d84802972ba3e644d2d5c47b87f73a6bd08/doc/get_yt.sh
> <
> https://bitbucket.org/yt_analysis/yt/raw/d9502d84802972ba3e644d2d5c47b87f73a6bd08/doc/get_yt.sh
> >
> >> >
> >> >
> >> > This script installs yt using the miniconda python distribution,
> which includes a precompiled python and openSSL library.
> >> >
> >> >
> >> >
> >> > -Nathan
> >> >
> >> >
> >> >
> >> > On Sat, Dec 26, 2015 at 11:40 AM, Sushilkumar <
> sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> wrote:
> >> >
> >> > Hi Nathan:
> >> >
> >> > Thanks for your reply.
> >> >
> >> > I had done that before installing version 2.X. I used to get errors
> as below. Even now I keep getting the same error after reinstalling from
> scratch. The error comes after "installing pip". I tried it on my pc and
> also on cluster but same issues.
> >> >
> >> > ********************************************
> >> > FAILURE REPORT:
> >> > ********************************************
> >> >
> >> > bootstrap(tmpdir=tmpdir)
> >> > File "get-pip.py", line 82, in bootstrap
> >> > import pip
> >> > File "/tmp/tmpxKqAjR/pip.zip/pip/__init__.py", line 15, in <module>
> >> > File "/tmp/tmpxKqAjR/pip.zip/pip/vcs/subversion.py", line 9, in
> <module>
> >> > File "/tmp/tmpxKqAjR/pip.zip/pip/index.py", line 30, in <module>
> >> > File "/tmp/tmpxKqAjR/pip.zip/pip/wheel.py", line 35, in <module>
> >> > File "/tmp/tmpxKqAjR/pip.zip/pip/_vendor/distlib/scripts.py", line
> 14, in <module>
> >> > File "/tmp/tmpxKqAjR/pip.zip/pip/_vendor/distlib/compat.py", line
> 31, in <module>
> >> > ImportError: cannot import name HTTPSHandler
> >> >
> >> > ********************************************
> >> > ********************************************
> >> > Failure. Check /home/adrith/yt-x86_64/yt_install.log. The last 10
> lines are above.
> >> >
> >> >
> >> >
> >> > On Sat, Dec 26, 2015 at 10:41 AM, Nathan Goldbaum <
> nathan12343@gmail.com <mailto:nathan12343@gmail.com>> wrote:
> >> >
> >> > Hi Sushilkumar,
> >> >
> >> >
> >> >
> >> > Can you try reinstalling yt from scratch?
> >> >
> >> >
> >> >
> >> > -Nathan
> >> >
> >> >
> >> >
> >> > On Sat, Dec 26, 2015 at 10:39 AM, Sushilkumar <
> sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> wrote:
> >> >
> >> > Dear yt:
> >> >
> >> > I am currently running yt version 2.6.1 and want to update to version
> 3 (to read text files). Could you provide me link to so?
> >> >
> >> > I tried it using yt update --all as per the link
> >> >
> >> >
> http://yt-project.org/doc/yt3differences.html#updating-to-yt-3-0-from-old-versions-and-going-back
> <
> http://yt-project.org/doc/yt3differences.html#updating-to-yt-3-0-from-old-versions-and-going-back
> >
> >> > .
> >> >
> >> > But it wont update to 3.0 and still shows as 2.6.1
> >> >
> >> > Kindly help
> >> >
> >> > Thanks in advance
> >> >
> >> > sushilkumar
> >> >
> >> >
> >> >
> >> > On Thu, Dec 24, 2015 at 12:25 PM, <
> yt-users-request@lists.spacepope.org <mailto:
> yt-users-request@lists.spacepope.org>> wrote:
> >> >
> >> > Send yt-users mailing list submissions to
> >> > yt-users@lists.spacepope.org <mailto:
> yt-users@lists.spacepope.org>
> >> >
> >> > To subscribe or unsubscribe via the World Wide Web, visit
> >> >
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> > or, via email, send a message with subject or body 'help' to
> >> > yt-users-request@lists.spacepope.org <mailto:
> yt-users-request@lists.spacepope.org>
> >> >
> >> > You can reach the person managing the list at
> >> > yt-users-owner@lists.spacepope.org <mailto:
> yt-users-owner@lists.spacepope.org>
> >> >
> >> > When replying, please edit your Subject line so it is more specific
> >> > than "Re: Contents of yt-users digest..."
> >> >
> >> >
> >> > Today's Topics:
> >> >
> >> > 1. Re: problem with slices in non-unitary volumes (Nathan Goldbaum)
> >> >
> >> >
> >> > ----------------------------------------------------------------------
> >> >
> >> > Message: 1
> >> > Date: Wed, 23 Dec 2015 17:17:56 -0600
> >> > From: Nathan Goldbaum <nathan12343@gmail.com <mailto:
> nathan12343@gmail.com>>
> >> > To: Discussion of the yt analysis package
> >> > <yt-users@lists.spacepope.org <mailto:
> yt-users@lists.spacepope.org>>
> >> > Subject: Re: [yt-users] problem with slices in non-unitary volumes
> >> > Message-ID:
> >> > <
> CAJXewOmVEX-qB41doTk+7DT1AOLsn53KMb8nvfr8dwyFrKY-4g@mail.gmail.com
> <mailto:
> CAJXewOmVEX-qB41doTk%2B7DT1AOLsn53KMb8nvfr8dwyFrKY-4g@mail.gmail.com>>
> >> > Content-Type: text/plain; charset="utf-8"
> >> >
> >> > I get the same error over here. I think it's unrelated to the other
> error.
> >> > The relevant portion of the C stack trace is here:
> >> >
> >> > Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
> >> > 0 libsystem_kernel.dylib 0x00007fff8b615286 __pthread_kill
> + 10
> >> > 1 libsystem_c.dylib 0x00007fff8bc2a9ab abort + 129
> >> > 2 libsystem_malloc.dylib 0x00007fff915d5fe2 szone_error +
> 625
> >> > 3 libsystem_malloc.dylib 0x00007fff915cf374
> >> > small_free_list_remove_ptr + 154
> >> > 4 libsystem_malloc.dylib 0x00007fff915cac3f
> >> > szone_free_definite_size + 1856
> >> > 5 multiarray.so 0x00000001044c2d16 npy_free_cache +
> 70
> >> > 6 multiarray.so 0x00000001044c6ed6 array_dealloc +
> 182
> >> > 7 selection_routines.so 0x00000001063ffe34
> >> >
> __pyx_pw_2yt_8geometry_18selection_routines_13SliceSelector_3fill_mask +
> >> > 8804 (selection_routines.c:19749)
> >> >
> >> > Line 19749 of selection_routines.c corresponds to line 1158 in
> >> > selection_routines.pyx, which is the place where the fill_mask member
> >> > variable of the SliceSelector extension type gets defined.
> >> >
> >> > Unfortunately, I have no idea how to debug this from here...
> >> >
> >> > -Nathan
> >> >
> >> > On Wed, Dec 23, 2015 at 4:57 PM, Brian O'Shea <bwoshea@gmail.com
> <mailto:bwoshea@gmail.com>> wrote:
> >> >
> >> > > Actually, interesting followup here - I have to take it back. When
> I do a
> >> > > projection plot:
> >> > >
> >> > > yt.ProjectionPlot(ds,'x',("gas",
> >> > > "temperature"),center=[0.0,0.0,0.0],width=(0.2,'Mpc')).save()
> >> > >
> >> > > the behavior is perfectly fine and I get projections that look
> sensible.
> >> > > *however*, when I do a slice plot:
> >> > >
> >> > > yt.SlicePlot(ds,'x',("gas",
> >> > > "temperature"),center=[0.0,0.0,0.0],width=(0.2,'Mpc')).save()
> >> > >
> >> > > I get a malloc error:
> >> > >
> >> > > yt : [INFO ] 2015-12-23 17:50:59,082 Gathering a field list
> (this may
> >> > > take a moment.)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,155 Loading field plugins.
> >> > > yt : [INFO ] 2015-12-23 17:50:59,155 Loaded angular_momentum (8
> new
> >> > > fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,156 Loaded astro (16 new
> fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,156 Loaded cosmology (23 new
> fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,156 Loaded fluid (64 new
> fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,157 Loaded fluid_vector (96 new
> >> > > fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,157 Loaded geometric (112 new
> fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,157 Loaded local (112 new
> fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,157 Loaded magnetic_field (120
> new
> >> > > fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,158 Loaded my_plugins (120 new
> fields)
> >> > > yt : [INFO ] 2015-12-23 17:50:59,158 Loaded species (122 new
> fields)
> >> > > python2.7(12254,0x7fff72d19310) malloc: *** error for object
> 0x103e39008:
> >> > > incorrect checksum for freed object - object was probably modified
> after
> >> > > being freed.
> >> > > *** set a breakpoint in malloc_error_break to debug
> >> > > Abort trap: 6
> >> > >
> >> > > This happens on my Mac (OS X 10.9.5, LLVM v6.0) and also on my Linux
> >> > > machine (Ubuntu 13.04, gcc 4.6.3), although on the linux machine I
> just get
> >> > > a seg fault instead of the malloc stuff. Using pdb (python -m pdb
> >> > > crashing_script.py) gives me the same error with no additional
> information.
> >> > >
> >> > >
> >> > > On Wed, Dec 23, 2015 at 5:40 PM, Brian O'Shea <bwoshea@gmail.com
> <mailto:bwoshea@gmail.com>> wrote:
> >> > >
> >> > >> Bugfix confirmed; this works for me as well. Thank you very much!
> >> > >>
> >> > >> On Wed, Dec 23, 2015 at 5:18 PM, Nathan Goldbaum <
> nathan12343@gmail.com <mailto:nathan12343@gmail.com>>
> >> > >> wrote:
> >> > >>
> >> > >>> I've opened a pull request that allows me to load your dataset:
> >> > >>>
> >> > >>>
> >> > >>>
> https://bitbucket.org/yt_analysis/yt/pull-requests/1915/bugfix-avoid-creating-particle-unions-for/diff
> <
> https://bitbucket.org/yt_analysis/yt/pull-requests/1915/bugfix-avoid-creating-particle-unions-for/diff
> >
> >> > >>>
> >> > >>> On Wed, Dec 23, 2015 at 4:08 PM, Brian O'Shea <bwoshea@gmail.com
> <mailto:bwoshea@gmail.com>> wrote:
> >> > >>>
> >> > >>>> Oh, interesting. Is there a way to circumvent auto-detection of
> fields?
> >> > >>>>
> >> > >>>> On Wed, Dec 23, 2015 at 4:35 PM, Nathan Goldbaum <
> nathan12343@gmail.com <mailto:nathan12343@gmail.com>
> >> > >>>> > wrote:
> >> > >>>>
> >> > >>>>> It looks like field detection is breaking for this Enzo-3.0
> active
> >> > >>>>> particle dataset. StoredEnergy is available on-disk as
> ('AGNParticle,
> >> > >>>>> 'StoredEnergy'), but for some reason the field detection system
> isn't able
> >> > >>>>> to guess that.
> >> > >>>>>
> >> > >>>>> On Wed, Dec 23, 2015 at 3:19 PM, Nathan Goldbaum <
> >> > >>>>> nathan12343@gmail.com <mailto:nathan12343@gmail.com>> wrote:
> >> > >>>>>
> >> > >>>>>>
> >> > >>>>>>
> >> > >>>>>> On Wed, Dec 23, 2015 at 11:20 AM, Brian O'Shea <
> bwoshea@gmail.com <mailto:bwoshea@gmail.com>>
> >> > >>>>>> wrote:
> >> > >>>>>>
> >> > >>>>>>> Dear yt-users,
> >> > >>>>>>>
> >> > >>>>>>> I'm having a problem with making slices in non-unitary
> volumes. I
> >> > >>>>>>> have a 3D enzo simulation that has domain bounds of
> (-1.6...1.6) in every
> >> > >>>>>>> dimension (units of megaparsecs), and after I updated to the
> tip of yt-3
> >> > >>>>>>> (changeset d9502d848029) from a fairly old version of the
> code I suddenly
> >> > >>>>>>> have problems with making simple projections. If I run this
> set of
> >> > >>>>>>> commands:
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>> Any idea which version you updated from? I tried on yt-3.1 and
> get
> >> > >>>>>> the same error. This is just so we can bisect and find the
> change that
> >> > >>>>>> introduced the regression.
> >> > >>>>>>
> >> > >>>>>>
> >> > >>>>>>> import yt
> >> > >>>>>>> ds = yt.load("DD0400/DD0400")
> >> > >>>>>>> proj =
> >> > >>>>>>>
> yt.SlicePlot(ds,'x','temperature',center=[0.0,0.0,0.0],width=(0.2,'Mpc'))
> >> > >>>>>>>
> >> > >>>>>>> I get this error:
> >> > >>>>>>>
> >> > >>>>>>> http://paste.yt-project.org/show/6115/ <
> http://paste.yt-project.org/show/6115/>
> >> > >>>>>>>
> >> > >>>>>>> This seems to work fine on an Enzo cosmological dataset
> (domain
> >> > >>>>>>> bounds 0-1 in each dimension), and previously worked fine in
> yt-3 (using a
> >> > >>>>>>> version of the code from a couple of months ago).
> >> > >>>>>>>
> >> > >>>>>>> is this a bug, or am I doing something dumb?
> >> > >>>>>>>
> >> > >>>>>>> Thanks!
> >> > >>>>>>>
> >> > >>>>>>> --Brian
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>> _______________________________________________
> >> > >>>>>>> yt-users mailing list
> >> > >>>>>>> yt-users@lists.spacepope.org <mailto:
> yt-users@lists.spacepope.org>
> >> > >>>>>>>
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> > >>>>>>>
> >> > >>>>>>>
> >> > >>>>>>
> >> > >>>>>
> >> > >>>>> _______________________________________________
> >> > >>>>> yt-users mailing list
> >> > >>>>> yt-users@lists.spacepope.org <mailto:
> yt-users@lists.spacepope.org>
> >> > >>>>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> > >>>>>
> >> > >>>>>
> >> > >>>>
> >> > >>>> _______________________________________________
> >> > >>>> yt-users mailing list
> >> > >>>> yt-users@lists.spacepope.org <mailto:
> yt-users@lists.spacepope.org>
> >> > >>>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> > >>>>
> >> > >>>>
> >> > >>>
> >> > >>> _______________________________________________
> >> > >>> yt-users mailing list
> >> > >>> yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org
> >
> >> > >>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> > >>>
> >> > >>>
> >> > >>
> >> > >
> >> > > _______________________________________________
> >> > > yt-users mailing list
> >> > > yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>
> >> > > http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> > >
> >> > >
> >> > -------------- next part --------------
> >> > An HTML attachment was scrubbed...
> >> > URL: <
> http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20151223/0739ada6/attachment.html
> <
> http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20151223/0739ada6/attachment.html
> >>
> >> >
> >> > ------------------------------
> >> >
> >> > Subject: Digest Footer
> >> >
> >> > _______________________________________________
> >> > yt-users mailing list
> >> > yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>
> >> > http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> >
> >> >
> >> > ------------------------------
> >> >
> >> > End of yt-users Digest, Vol 94, Issue 24
> >> > ****************************************
> >> >
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > SK2
> >> >
> >> >
> >> >
> >> > "Claiming that something can move faster than light is a good
> conversation-stopper in physics. People edge away from you in cocktail
> parties; friends never return phone calls. You just don?t mess with Albert
> Einstein."
> >> >
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > yt-users mailing list
> >> > yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>
> >> > http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > --
> >> >
> >> > SK2
> >> >
> >> >
> >> >
> >> > "Claiming that something can move faster than light is a good
> conversation-stopper in physics. People edge away from you in cocktail
> parties; friends never return phone calls. You just don?t mess with Albert
> Einstein."
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > --
> >> > SK2
> >> >
> >> > "Claiming that something can move faster than light is a good
> conversation-stopper in physics. People edge away from you in cocktail
> parties; friends never return phone calls. You just don?t mess with Albert
> Einstein."
> >> >
> >> > _______________________________________________
> >> > yt-users mailing list
> >> > yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>
> >> > http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20160104/e649ce9b/attachment.htm
> >
> >>
> >> ------------------------------
> >>
> >> Subject: Digest Footer
> >>
> >> _______________________________________________
> >> yt-users mailing list
> >> yt-users@lists.spacepope.org
> >> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
> >>
> >>
> >> ------------------------------
> >>
> >> End of yt-users Digest, Vol 95, Issue 2
> >> ***************************************
> >
> >
> >
> > --
> > SK2
> >
> > "Claiming that something can move faster than light is a good
> conversation-stopper in physics. People edge away from you in cocktail
> parties; friends never return phone calls. You just don?t mess with Albert
> Einstein."
> >
> > _______________________________________________
> > yt-users mailing list
> > yt-users@lists.spacepope.org
> > http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20160104/36f5165e/attachment.htm
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> yt-users mailing list
> yt-users@lists.spacepope.org
> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
>
>
> ------------------------------
>
> End of yt-users Digest, Vol 95, Issue 4
> ***************************************
>
--
*SK2*
*"**Claiming that something can move faster than light is a good
conversation-stopper in physics. People edge away from you in cocktail
parties; friends never return phone calls. You just don’t mess with Albert
Einstein.**"*
_______________________________________________
yt-users mailing list
yt-users@lists.spacepope.org
http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
Hi Sushilkumar, This is because the yt.loadtxt function is not in version 3.2.2, it is only in the current development tree. To be honest, yt.loadtxt is just a “nice thing to have”, all it does it call numpy.loadtxt and then check to see if there is a header in the file with units information in it. You can always just call numpy.loadtxt and add units later if you need to. Best, John Z
On Jan 7, 2016, at 12:26 PM, Sushilkumar <sushil.sush19us@gmail.com> wrote:
Dear yt:
I am currently having issues with yt.loadtxt. It gives me the following error. I am the getting the following error File "numpy_loadtxt.py", line 3, in <module> b = yt.loadtxt("u25.dat") AttributeError: 'module' object has no attribute 'loadtxt'
I am currently using version 3.2.2
yt module located at: /state/partition1/anaconda/lib/python2.7/site-packages
The current version and changeset for the code is:
--- Version = 3.2.2 Changeset = None ---
I am using the example for loadtxt as mentioned here http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-an... <http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-an...>
Thanks in advance
On Mon, Jan 4, 2016 at 11:10 AM, <yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org>> wrote: Send yt-users mailing list submissions to yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>
To subscribe or unsubscribe via the World Wide Web, visit http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> or, via email, send a message with subject or body 'help' to yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org>
You can reach the person managing the list at yt-users-owner@lists.spacepope.org <mailto:yt-users-owner@lists.spacepope.org>
When replying, please edit your Subject line so it is more specific than "Re: Contents of yt-users digest..."
Today's Topics:
1. Re: Issue with loading data (John ZuHone)
----------------------------------------------------------------------
Message: 1 Date: Mon, 4 Jan 2016 12:10:11 -0500 From: John ZuHone <jzuhone@gmail.com <mailto:jzuhone@gmail.com>> To: Discussion of the yt analysis package <yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> Subject: Re: [yt-users] Issue with loading data Message-ID: <BF0E1EAF-D72D-483C-98FC-3C08C9968667@gmail.com <mailto:BF0E1EAF-D72D-483C-98FC-3C08C9968667@gmail.com>> Content-Type: text/plain; charset="utf-8"
yt.loadtxt only works in the current development version of the 3.x series of yt.
John ZuHone Harvard-Smithsonian Center for Astrophysics
60 Garden St., MS-67 Cambridge, MA 02138 (w) 617-496-1816 <tel:617-496-1816> (m) 781-708-5004 <tel:781-708-5004> jzuhone@cfa.harvard.edu <mailto:jzuhone@cfa.harvard.edu> jzuhone@gmail.com <mailto:jzuhone@gmail.com> http://www.jzuhone.com <http://www.jzuhone.com/>
On Jan 4, 2016, at 12:06 PM, Sushilkumar <sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> wrote:
Dear yt:
Can I use yt.loadtxt for yt version 2.6.1? Are there examples for "loading from file" using numpy array? The link below formats as numpy array but not from file.
http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=l... <http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=l...>
On Mon, Jan 4, 2016 at 10:52 AM, <yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org>> wrote: Send yt-users mailing list submissions to yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>
To subscribe or unsubscribe via the World Wide Web, visit http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> or, via email, send a message with subject or body 'help' to yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org>
You can reach the person managing the list at yt-users-owner@lists.spacepope.org <mailto:yt-users-owner@lists.spacepope.org>
When replying, please edit your Subject line so it is more specific than "Re: Contents of yt-users digest..."
Today's Topics:
1. Re: problem with yt update to 3.0 (John ZuHone)
----------------------------------------------------------------------
Message: 1 Date: Mon, 4 Jan 2016 11:52:03 -0500 From: John ZuHone <jzuhone@gmail.com <mailto:jzuhone@gmail.com>> To: Discussion of the yt analysis package <yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> Subject: Re: [yt-users] problem with yt update to 3.0 Message-ID: <E58E10EE-846A-4595-87EC-47CAF9CDA022@gmail.com <mailto:E58E10EE-846A-4595-87EC-47CAF9CDA022@gmail.com>> Content-Type: text/plain; charset="utf-8"
In the current development version of yt there is also yt.loadtxt, which is essentially a wrapper for numpy.loadtxt which also accepts unit information.
See http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-an... <http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-an...> <http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-an... <http://yt-project.org/docs/dev/analyzing/units/symbolic_units.html#Saving-and-Loading-YTArrays-to/from-disk>>
On Dec 30, 2015, at 12:01 PM, Sushilkumar <sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> wrote:
Dear Nathan:
As per your advice I am trying to load my text file to numpy array. But there are two ways to so using numpy.loadtxt and numpy.fromfile. Could you suggest which of them is more efficient for large files and more suitable for yt (if any)?
Thanks in advance
On Sat, Dec 26, 2015 at 6:43 PM, Sushilkumar Sreekumar <sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com> <mailto:sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>>> wrote: Dear Nathan:
Thank you for your help
-- SK2
"Claiming that something can move faster than light is a good conversation-stopper in physics. People edge away from you in cocktail parties; friends never return phone calls. You just don?t mess with Albert Einstein."
From: Nathan Goldbaum <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>> Sent: Saturday, December 26, 2015 12:34 PM To: Sushilkumar <mailto:sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>> Cc: Discussion of the yt analysis package <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> Subject: Re: [yt-users] problem with yt update to 3.0
If you can format your data as numpy arrays, there are examples of how to load your data into yt here:
http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=l... <http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=l...> <http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=l... <http://yt-project.org/docs/2.6/examining/generic_array_data.html?highlight=load_uniform_grid>>
yt (2.6.1 or newer) does not support i/o from arbitrary text files.
On Sat, Dec 26, 2015 at 12:30 PM, Sushilkumar <sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com> <mailto:sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>>> wrote:
Dear Nathan:
I will try it and let you know. In the meanwhile, could you let me know if yt supports loading text file for version 2.6.1? If so could you point me to examples for the same.
Thanks in advance
On Sat, Dec 26, 2015, 11:44 Nathan Goldbaum <nathan12343@gmail.com <mailto:nathan12343@gmail.com> <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>>> wrote:
This is happening because python is unable to link against an openSSL library.
Can you try using the get_yt.sh script install of the install_script.sh script:
https://bitbucket.org/yt_analysis/yt/raw/d9502d84802972ba3e644d2d5c47b87f73a... <https://bitbucket.org/yt_analysis/yt/raw/d9502d84802972ba3e644d2d5c47b87f73a...> <https://bitbucket.org/yt_analysis/yt/raw/d9502d84802972ba3e644d2d5c47b87f73a... <https://bitbucket.org/yt_analysis/yt/raw/d9502d84802972ba3e644d2d5c47b87f73a6bd08/doc/get_yt.sh>>
This script installs yt using the miniconda python distribution, which includes a precompiled python and openSSL library.
-Nathan
On Sat, Dec 26, 2015 at 11:40 AM, Sushilkumar <sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com> <mailto:sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>>> wrote:
Hi Nathan:
Thanks for your reply.
I had done that before installing version 2.X. I used to get errors as below. Even now I keep getting the same error after reinstalling from scratch. The error comes after "installing pip". I tried it on my pc and also on cluster but same issues.
******************************************** FAILURE REPORT: ********************************************
bootstrap(tmpdir=tmpdir) File "get-pip.py", line 82, in bootstrap import pip File "/tmp/tmpxKqAjR/pip.zip/pip/__init__.py", line 15, in <module> File "/tmp/tmpxKqAjR/pip.zip/pip/vcs/subversion.py", line 9, in <module> File "/tmp/tmpxKqAjR/pip.zip/pip/index.py", line 30, in <module> File "/tmp/tmpxKqAjR/pip.zip/pip/wheel.py", line 35, in <module> File "/tmp/tmpxKqAjR/pip.zip/pip/_vendor/distlib/scripts.py", line 14, in <module> File "/tmp/tmpxKqAjR/pip.zip/pip/_vendor/distlib/compat.py", line 31, in <module> ImportError: cannot import name HTTPSHandler
******************************************** ******************************************** Failure. Check /home/adrith/yt-x86_64/yt_install.log. The last 10 lines are above.
On Sat, Dec 26, 2015 at 10:41 AM, Nathan Goldbaum <nathan12343@gmail.com <mailto:nathan12343@gmail.com> <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>>> wrote:
Hi Sushilkumar,
Can you try reinstalling yt from scratch?
-Nathan
On Sat, Dec 26, 2015 at 10:39 AM, Sushilkumar <sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com> <mailto:sushil.sush19us@gmail.com <mailto:sushil.sush19us@gmail.com>>> wrote:
Dear yt:
I am currently running yt version 2.6.1 and want to update to version 3 (to read text files). Could you provide me link to so?
I tried it using yt update --all as per the link
http://yt-project.org/doc/yt3differences.html#updating-to-yt-3-0-from-old-ve... <http://yt-project.org/doc/yt3differences.html#updating-to-yt-3-0-from-old-ve...> <http://yt-project.org/doc/yt3differences.html#updating-to-yt-3-0-from-old-ve... <http://yt-project.org/doc/yt3differences.html#updating-to-yt-3-0-from-old-versions-and-going-back>> .
But it wont update to 3.0 and still shows as 2.6.1
Kindly help
Thanks in advance
sushilkumar
On Thu, Dec 24, 2015 at 12:25 PM, <yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org> <mailto:yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org>>> wrote:
Send yt-users mailing list submissions to yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>>
To subscribe or unsubscribe via the World Wide Web, visit http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>> or, via email, send a message with subject or body 'help' to yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org> <mailto:yt-users-request@lists.spacepope.org <mailto:yt-users-request@lists.spacepope.org>>
You can reach the person managing the list at yt-users-owner@lists.spacepope.org <mailto:yt-users-owner@lists.spacepope.org> <mailto:yt-users-owner@lists.spacepope.org <mailto:yt-users-owner@lists.spacepope.org>>
When replying, please edit your Subject line so it is more specific than "Re: Contents of yt-users digest..."
Today's Topics:
1. Re: problem with slices in non-unitary volumes (Nathan Goldbaum)
----------------------------------------------------------------------
Message: 1 Date: Wed, 23 Dec 2015 17:17:56 -0600 From: Nathan Goldbaum <nathan12343@gmail.com <mailto:nathan12343@gmail.com> <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>>> To: Discussion of the yt analysis package <yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>>> Subject: Re: [yt-users] problem with slices in non-unitary volumes Message-ID: <CAJXewOmVEX-qB41doTk+7DT1AOLsn53KMb8nvfr8dwyFrKY-4g@mail.gmail.com <mailto:CAJXewOmVEX-qB41doTk%2B7DT1AOLsn53KMb8nvfr8dwyFrKY-4g@mail.gmail.com> <mailto:CAJXewOmVEX-qB41doTk%2B7DT1AOLsn53KMb8nvfr8dwyFrKY-4g@mail.gmail.com <mailto:CAJXewOmVEX-qB41doTk%252B7DT1AOLsn53KMb8nvfr8dwyFrKY-4g@mail.gmail.com>>> Content-Type: text/plain; charset="utf-8"
I get the same error over here. I think it's unrelated to the other error. The relevant portion of the C stack trace is here:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 libsystem_kernel.dylib 0x00007fff8b615286 __pthread_kill + 10 1 libsystem_c.dylib 0x00007fff8bc2a9ab abort + 129 2 libsystem_malloc.dylib 0x00007fff915d5fe2 szone_error + 625 3 libsystem_malloc.dylib 0x00007fff915cf374 small_free_list_remove_ptr + 154 4 libsystem_malloc.dylib 0x00007fff915cac3f szone_free_definite_size + 1856 5 multiarray.so 0x00000001044c2d16 npy_free_cache + 70 6 multiarray.so 0x00000001044c6ed6 array_dealloc + 182 7 selection_routines.so 0x00000001063ffe34 __pyx_pw_2yt_8geometry_18selection_routines_13SliceSelector_3fill_mask + 8804 (selection_routines.c:19749)
Line 19749 of selection_routines.c corresponds to line 1158 in selection_routines.pyx, which is the place where the fill_mask member variable of the SliceSelector extension type gets defined.
Unfortunately, I have no idea how to debug this from here...
-Nathan
On Wed, Dec 23, 2015 at 4:57 PM, Brian O'Shea <bwoshea@gmail.com <mailto:bwoshea@gmail.com> <mailto:bwoshea@gmail.com <mailto:bwoshea@gmail.com>>> wrote:
Actually, interesting followup here - I have to take it back. When I do a projection plot:
yt.ProjectionPlot(ds,'x',("gas", "temperature"),center=[0.0,0.0,0.0],width=(0.2,'Mpc')).save()
the behavior is perfectly fine and I get projections that look sensible. *however*, when I do a slice plot:
yt.SlicePlot(ds,'x',("gas", "temperature"),center=[0.0,0.0,0.0],width=(0.2,'Mpc')).save()
I get a malloc error:
yt : [INFO ] 2015-12-23 17:50:59,082 Gathering a field list (this may take a moment.) yt : [INFO ] 2015-12-23 17:50:59,155 Loading field plugins. yt : [INFO ] 2015-12-23 17:50:59,155 Loaded angular_momentum (8 new fields) yt : [INFO ] 2015-12-23 17:50:59,156 Loaded astro (16 new fields) yt : [INFO ] 2015-12-23 17:50:59,156 Loaded cosmology (23 new fields) yt : [INFO ] 2015-12-23 17:50:59,156 Loaded fluid (64 new fields) yt : [INFO ] 2015-12-23 17:50:59,157 Loaded fluid_vector (96 new fields) yt : [INFO ] 2015-12-23 17:50:59,157 Loaded geometric (112 new fields) yt : [INFO ] 2015-12-23 17:50:59,157 Loaded local (112 new fields) yt : [INFO ] 2015-12-23 17:50:59,157 Loaded magnetic_field (120 new fields) yt : [INFO ] 2015-12-23 17:50:59,158 Loaded my_plugins (120 new fields) yt : [INFO ] 2015-12-23 17:50:59,158 Loaded species (122 new fields) python2.7(12254,0x7fff72d19310) malloc: *** error for object 0x103e39008: incorrect checksum for freed object - object was probably modified after being freed. *** set a breakpoint in malloc_error_break to debug Abort trap: 6
This happens on my Mac (OS X 10.9.5, LLVM v6.0) and also on my Linux machine (Ubuntu 13.04, gcc 4.6.3), although on the linux machine I just get a seg fault instead of the malloc stuff. Using pdb (python -m pdb crashing_script.py) gives me the same error with no additional information.
On Wed, Dec 23, 2015 at 5:40 PM, Brian O'Shea <bwoshea@gmail.com <mailto:bwoshea@gmail.com> <mailto:bwoshea@gmail.com <mailto:bwoshea@gmail.com>>> wrote:
Bugfix confirmed; this works for me as well. Thank you very much!
On Wed, Dec 23, 2015 at 5:18 PM, Nathan Goldbaum <nathan12343@gmail.com <mailto:nathan12343@gmail.com> <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>>> wrote:
> I've opened a pull request that allows me to load your dataset: > > > https://bitbucket.org/yt_analysis/yt/pull-requests/1915/bugfix-avoid-creatin... <https://bitbucket.org/yt_analysis/yt/pull-requests/1915/bugfix-avoid-creatin...> <https://bitbucket.org/yt_analysis/yt/pull-requests/1915/bugfix-avoid-creatin... <https://bitbucket.org/yt_analysis/yt/pull-requests/1915/bugfix-avoid-creating-particle-unions-for/diff>> > > On Wed, Dec 23, 2015 at 4:08 PM, Brian O'Shea <bwoshea@gmail.com <mailto:bwoshea@gmail.com> <mailto:bwoshea@gmail.com <mailto:bwoshea@gmail.com>>> wrote: > >> Oh, interesting. Is there a way to circumvent auto-detection of fields? >> >> On Wed, Dec 23, 2015 at 4:35 PM, Nathan Goldbaum <nathan12343@gmail.com <mailto:nathan12343@gmail.com> <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>> >> > wrote: >> >>> It looks like field detection is breaking for this Enzo-3.0 active >>> particle dataset. StoredEnergy is available on-disk as ('AGNParticle, >>> 'StoredEnergy'), but for some reason the field detection system isn't able >>> to guess that. >>> >>> On Wed, Dec 23, 2015 at 3:19 PM, Nathan Goldbaum < >>> nathan12343@gmail.com <mailto:nathan12343@gmail.com> <mailto:nathan12343@gmail.com <mailto:nathan12343@gmail.com>>> wrote: >>> >>>> >>>> >>>> On Wed, Dec 23, 2015 at 11:20 AM, Brian O'Shea <bwoshea@gmail.com <mailto:bwoshea@gmail.com> <mailto:bwoshea@gmail.com <mailto:bwoshea@gmail.com>>> >>>> wrote: >>>> >>>>> Dear yt-users, >>>>> >>>>> I'm having a problem with making slices in non-unitary volumes. I >>>>> have a 3D enzo simulation that has domain bounds of (-1.6...1.6) in every >>>>> dimension (units of megaparsecs), and after I updated to the tip of yt-3 >>>>> (changeset d9502d848029) from a fairly old version of the code I suddenly >>>>> have problems with making simple projections. If I run this set of >>>>> commands: >>>>> >>>>> >>>> Any idea which version you updated from? I tried on yt-3.1 and get >>>> the same error. This is just so we can bisect and find the change that >>>> introduced the regression. >>>> >>>> >>>>> import yt >>>>> ds = yt.load("DD0400/DD0400") >>>>> proj = >>>>> yt.SlicePlot(ds,'x','temperature',center=[0.0,0.0,0.0],width=(0.2,'Mpc')) >>>>> >>>>> I get this error: >>>>> >>>>> http://paste.yt-project.org/show/6115/ <http://paste.yt-project.org/show/6115/> <http://paste.yt-project.org/show/6115/ <http://paste.yt-project.org/show/6115/>> >>>>> >>>>> This seems to work fine on an Enzo cosmological dataset (domain >>>>> bounds 0-1 in each dimension), and previously worked fine in yt-3 (using a >>>>> version of the code from a couple of months ago). >>>>> >>>>> is this a bug, or am I doing something dumb? >>>>> >>>>> Thanks! >>>>> >>>>> --Brian >>>>> >>>>> >>>>> _______________________________________________ >>>>> yt-users mailing list >>>>> yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> >>>>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>> >>>>> >>>>> >>>> >>> >>> _______________________________________________ >>> yt-users mailing list >>> yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> >>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>> >>> >>> >> >> _______________________________________________ >> yt-users mailing list >> yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> >> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>> >> >> > > _______________________________________________ > yt-users mailing list > yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> > http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>> > >
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>>
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/2015... <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/2015...> <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/2015... <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20151223/0739ada6/attachment.html>>>
------------------------------
Subject: Digest Footer
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>>
------------------------------
End of yt-users Digest, Vol 94, Issue 24 ****************************************
--
SK2
"Claiming that something can move faster than light is a good conversation-stopper in physics. People edge away from you in cocktail parties; friends never return phone calls. You just don?t mess with Albert Einstein."
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>>
--
SK2
"Claiming that something can move faster than light is a good conversation-stopper in physics. People edge away from you in cocktail parties; friends never return phone calls. You just don?t mess with Albert Einstein."
-- SK2
"Claiming that something can move faster than light is a good conversation-stopper in physics. People edge away from you in cocktail parties; friends never return phone calls. You just don?t mess with Albert Einstein."
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> <mailto:yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org>> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/2016... <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20160104/e649ce9b/attachment.htm>>
------------------------------
Subject: Digest Footer
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
------------------------------
End of yt-users Digest, Vol 95, Issue 2 ***************************************
-- SK2
"Claiming that something can move faster than light is a good conversation-stopper in physics. People edge away from you in cocktail parties; friends never return phone calls. You just don?t mess with Albert Einstein."
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/2016... <http://lists.spacepope.org/pipermail/yt-users-spacepope.org/attachments/20160104/36f5165e/attachment.htm>>
------------------------------
Subject: Digest Footer
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org <mailto:yt-users@lists.spacepope.org> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org <http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org>
------------------------------
End of yt-users Digest, Vol 95, Issue 4 ***************************************
-- SK2
"Claiming that something can move faster than light is a good conversation-stopper in physics. People edge away from you in cocktail parties; friends never return phone calls. You just don’t mess with Albert Einstein."
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
participants (2)
-
John ZuHone -
Sushilkumar