log scale image for zero dynamic range
Hi all, When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that. Thanks, Chang-Goo
Hi Chang-Goo If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame. Nathan On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi all,
When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that.
Thanks,
Chang-Goo
Hi Nathan, I did set the limits explicitly, but yt switches colorer before it saves. See below for the link for my source code and the last part of error message. Chang-Goo http://paste.yt-project.org/show/4645/ yt : [INFO ] 2014-05-17 23:29:15,766 Making a fixed resolution buffer of (('gas', 'pok')) 512 by 512 yt : [INFO ] 2014-05-17 23:29:15,780 Making a fixed resolution buffer of (('athena', 'density')) 512 by 512 yt : [INFO ] 2014-05-17 23:29:15,795 Making a fixed resolution buffer of (('gas', 'nH')) 512 by 512 yt : [INFO ] 2014-05-17 23:29:15,810 Making a fixed resolution buffer of (('gas', 'density')) 512 by 512 yt : [INFO ] 2014-05-17 23:29:15,825 Making a fixed resolution buffer of (('gas', 'temp')) 512 by 512 yt : [INFO ] 2014-05-17 23:29:15,839 Making a fixed resolution buffer of (('athena', 'pressure')) 512 by 512 yt : [INFO ] 2014-05-17 23:29:15,854 Making a fixed resolution buffer of (('gas', 'pressure')) 512 by 512 yt : [WARNING ] 2014-05-17 23:29:15,889 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3. yt : [WARNING ] 2014-05-17 23:29:15,889 Switching to linear colorbar scaling. yt : [WARNING ] 2014-05-17 23:29:16,364 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3. yt : [WARNING ] 2014-05-17 23:29:16,364 Switching to linear colorbar scaling. yt : [INFO ] 2014-05-17 23:29:17,385 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_temp.png yt : [INFO ] 2014-05-17 23:29:17,916 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_nH.png On Sat, May 17, 2014 at 7:50 PM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
Hi Chang-Goo
If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi all,
When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that.
Thanks,
Chang-Goo
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
Ah, thanks for the report - I replied hastily before getting on a plane without looking at the source. I'll look at this tomorrow. Nathan On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi Nathan,
I did set the limits explicitly, but yt switches colorer before it saves. See below for the link for my source code and the last part of error message.
Chang-Goo
http://paste.yt-project.org/show/4645/
yt : [INFO ] 2014-05-17 23:29:15,766 Making a fixed resolution buffer of (('gas', 'pok')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,780 Making a fixed resolution buffer of (('athena', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,795 Making a fixed resolution buffer of (('gas', 'nH')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,810 Making a fixed resolution buffer of (('gas', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,825 Making a fixed resolution buffer of (('gas', 'temp')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,839 Making a fixed resolution buffer of (('athena', 'pressure')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,854 Making a fixed resolution buffer of (('gas', 'pressure')) 512 by 512
yt : [WARNING ] 2014-05-17 23:29:15,889 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:15,889 Switching to linear colorbar scaling.
yt : [WARNING ] 2014-05-17 23:29:16,364 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:16,364 Switching to linear colorbar scaling.
yt : [INFO ] 2014-05-17 23:29:17,385 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_temp.png
yt : [INFO ] 2014-05-17 23:29:17,916 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_nH.png
On Sat, May 17, 2014 at 7:50 PM, Nathan Goldbaum <nathan12343@gmail.com<javascript:_e(%7B%7D,'cvml','nathan12343@gmail.com');>
wrote:
Hi Chang-Goo
If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu<javascript:_e(%7B%7D,'cvml','cgkim@astro.princeton.edu');>> wrote:
Hi all,
When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that.
Thanks,
Chang-Goo
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org<javascript:_e(%7B%7D,'cvml','yt-users@lists.spacepope.org');> http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
Although it occurs to me that you might be able to work around this behavior by doing something like: slc = SlicePlot(ds, 'x', 'density') slc.set_zlim('density', 1e-4, 1e-0) slc.set_log('density', True) The key here is to call set_log after set_zlim. Just for some context: it is set up that way to avoid a crash in matplotlib which does not like creating logarithmic colorbars for data with zero dynamic range. Hope that's helpful, Nathan On Saturday, May 17, 2014, Nathan Goldbaum <nathan12343@gmail.com> wrote:
Ah, thanks for the report - I replied hastily before getting on a plane without looking at the source.
I'll look at this tomorrow.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu<javascript:_e(%7B%7D,'cvml','cgkim@astro.princeton.edu');>> wrote:
Hi Nathan,
I did set the limits explicitly, but yt switches colorer before it saves. See below for the link for my source code and the last part of error message.
Chang-Goo
http://paste.yt-project.org/show/4645/
yt : [INFO ] 2014-05-17 23:29:15,766 Making a fixed resolution buffer of (('gas', 'pok')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,780 Making a fixed resolution buffer of (('athena', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,795 Making a fixed resolution buffer of (('gas', 'nH')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,810 Making a fixed resolution buffer of (('gas', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,825 Making a fixed resolution buffer of (('gas', 'temp')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,839 Making a fixed resolution buffer of (('athena', 'pressure')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,854 Making a fixed resolution buffer of (('gas', 'pressure')) 512 by 512
yt : [WARNING ] 2014-05-17 23:29:15,889 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:15,889 Switching to linear colorbar scaling.
yt : [WARNING ] 2014-05-17 23:29:16,364 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:16,364 Switching to linear colorbar scaling.
yt : [INFO ] 2014-05-17 23:29:17,385 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_temp.png
yt : [INFO ] 2014-05-17 23:29:17,916 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_nH.png
On Sat, May 17, 2014 at 7:50 PM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
Hi Chang-Goo
If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi all,
When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that.
Thanks,
Chang-Goo
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
Hi Nathan, On Sun, May 18, 2014 at 2:17 AM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
Although it occurs to me that you might be able to work around this behavior by doing something like:
slc = SlicePlot(ds, 'x', 'density') slc.set_zlim('density', 1e-4, 1e-0) slc.set_log('density', True)
The key here is to call set_log after set_zlim.
As seen in the source code, this is exactly what I did. But, it didn't work. Chang-Goo
Just for some context: it is set up that way to avoid a crash in matplotlib which does not like creating logarithmic colorbars for data with zero dynamic range.
Hope that's helpful,
Nathan
On Saturday, May 17, 2014, Nathan Goldbaum <nathan12343@gmail.com> wrote:
Ah, thanks for the report - I replied hastily before getting on a plane without looking at the source.
I'll look at this tomorrow.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi Nathan,
I did set the limits explicitly, but yt switches colorer before it saves. See below for the link for my source code and the last part of error message.
Chang-Goo
http://paste.yt-project.org/show/4645/
yt : [INFO ] 2014-05-17 23:29:15,766 Making a fixed resolution buffer of (('gas', 'pok')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,780 Making a fixed resolution buffer of (('athena', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,795 Making a fixed resolution buffer of (('gas', 'nH')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,810 Making a fixed resolution buffer of (('gas', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,825 Making a fixed resolution buffer of (('gas', 'temp')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,839 Making a fixed resolution buffer of (('athena', 'pressure')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,854 Making a fixed resolution buffer of (('gas', 'pressure')) 512 by 512
yt : [WARNING ] 2014-05-17 23:29:15,889 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:15,889 Switching to linear colorbar scaling.
yt : [WARNING ] 2014-05-17 23:29:16,364 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:16,364 Switching to linear colorbar scaling.
yt : [INFO ] 2014-05-17 23:29:17,385 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_temp.png
yt : [INFO ] 2014-05-17 23:29:17,916 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_nH.png
On Sat, May 17, 2014 at 7:50 PM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
Hi Chang-Goo
If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi all,
When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that.
Thanks,
Chang-Goo
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
On Sun, May 18, 2014 at 10:44 AM, Chang-Goo Kim <cgkim@astro.princeton.edu>wrote:
Hi Nathan,
On Sun, May 18, 2014 at 2:17 AM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
Although it occurs to me that you might be able to work around this behavior by doing something like:
slc = SlicePlot(ds, 'x', 'density') slc.set_zlim('density', 1e-4, 1e-0) slc.set_log('density', True)
The key here is to call set_log after set_zlim.
As seen in the source code, this is exactly what I did. But, it didn't work.
That's what I get for replying to technical e-mail on my phone on a plane... In any case, I've issued a PR that *should* fix this issue: https://bitbucket.org/yt_analysis/yt/pull-request/909/making-it-possible-to-... I'd appreciate it if you tried it on your workflow. If you'd like, leave a comment on the PR indicating whether or not it worked for you.
Chang-Goo
Just for some context: it is set up that way to avoid a crash in matplotlib which does not like creating logarithmic colorbars for data with zero dynamic range.
Hope that's helpful,
Nathan
On Saturday, May 17, 2014, Nathan Goldbaum <nathan12343@gmail.com> wrote:
Ah, thanks for the report - I replied hastily before getting on a plane without looking at the source.
I'll look at this tomorrow.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi Nathan,
I did set the limits explicitly, but yt switches colorer before it saves. See below for the link for my source code and the last part of error message.
Chang-Goo
http://paste.yt-project.org/show/4645/
yt : [INFO ] 2014-05-17 23:29:15,766 Making a fixed resolution buffer of (('gas', 'pok')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,780 Making a fixed resolution buffer of (('athena', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,795 Making a fixed resolution buffer of (('gas', 'nH')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,810 Making a fixed resolution buffer of (('gas', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,825 Making a fixed resolution buffer of (('gas', 'temp')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,839 Making a fixed resolution buffer of (('athena', 'pressure')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,854 Making a fixed resolution buffer of (('gas', 'pressure')) 512 by 512
yt : [WARNING ] 2014-05-17 23:29:15,889 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:15,889 Switching to linear colorbar scaling.
yt : [WARNING ] 2014-05-17 23:29:16,364 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:16,364 Switching to linear colorbar scaling.
yt : [INFO ] 2014-05-17 23:29:17,385 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_temp.png
yt : [INFO ] 2014-05-17 23:29:17,916 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_nH.png
On Sat, May 17, 2014 at 7:50 PM, Nathan Goldbaum <nathan12343@gmail.com
wrote:
Hi Chang-Goo
If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi all,
When initial condition is uniform, it has zero dynamic range. Although it has no dynamic range, sometimes I need to plot it with log scale colorbar to make a movie with the same colorbar for later times. But, yt forced switch to linear colorbar. How can I make yt not to do that.
Thanks,
Chang-Goo
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
Good! This works. Thanks a lot!! Chang-Goo On Sun, May 18, 2014 at 2:00 PM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
On Sun, May 18, 2014 at 10:44 AM, Chang-Goo Kim <cgkim@astro.princeton.edu
wrote:
Hi Nathan,
On Sun, May 18, 2014 at 2:17 AM, Nathan Goldbaum <nathan12343@gmail.com>wrote:
Although it occurs to me that you might be able to work around this behavior by doing something like:
slc = SlicePlot(ds, 'x', 'density') slc.set_zlim('density', 1e-4, 1e-0) slc.set_log('density', True)
The key here is to call set_log after set_zlim.
As seen in the source code, this is exactly what I did. But, it didn't work.
That's what I get for replying to technical e-mail on my phone on a plane...
In any case, I've issued a PR that *should* fix this issue:
https://bitbucket.org/yt_analysis/yt/pull-request/909/making-it-possible-to-...
I'd appreciate it if you tried it on your workflow. If you'd like, leave a comment on the PR indicating whether or not it worked for you.
Chang-Goo
Just for some context: it is set up that way to avoid a crash in matplotlib which does not like creating logarithmic colorbars for data with zero dynamic range.
Hope that's helpful,
Nathan
On Saturday, May 17, 2014, Nathan Goldbaum <nathan12343@gmail.com> wrote:
Ah, thanks for the report - I replied hastily before getting on a plane without looking at the source.
I'll look at this tomorrow.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
Hi Nathan,
I did set the limits explicitly, but yt switches colorer before it saves. See below for the link for my source code and the last part of error message.
Chang-Goo
http://paste.yt-project.org/show/4645/
yt : [INFO ] 2014-05-17 23:29:15,766 Making a fixed resolution buffer of (('gas', 'pok')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,780 Making a fixed resolution buffer of (('athena', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,795 Making a fixed resolution buffer of (('gas', 'nH')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,810 Making a fixed resolution buffer of (('gas', 'density')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,825 Making a fixed resolution buffer of (('gas', 'temp')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,839 Making a fixed resolution buffer of (('athena', 'pressure')) 512 by 512
yt : [INFO ] 2014-05-17 23:29:15,854 Making a fixed resolution buffer of (('gas', 'pressure')) 512 by 512
yt : [WARNING ] 2014-05-17 23:29:15,889 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:15,889 Switching to linear colorbar scaling.
yt : [WARNING ] 2014-05-17 23:29:16,364 Plot image for field ('gas', 'nH') has zero dynamic range. Min = Max = 3.
yt : [WARNING ] 2014-05-17 23:29:16,364 Switching to linear colorbar scaling.
yt : [INFO ] 2014-05-17 23:29:17,385 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_temp.png
yt : [INFO ] 2014-05-17 23:29:17,916 Saving plot /scratch/gpfs/changgoo/sntest_TI/png/n2_SN_dx2_L256_TE_multi_fm3/n2_SN_dx2_L256_TE_multi_fm3.0000_Slice_z_nH.png
On Sat, May 17, 2014 at 7:50 PM, Nathan Goldbaum < nathan12343@gmail.com> wrote:
Hi Chang-Goo
If you explicitly set the limits of the colorbar using the set_zlim function you will avoid the zero dynamic range check. That will also keep the colorbar limits the same from frame to frame.
Nathan
On Saturday, May 17, 2014, Chang-Goo Kim <cgkim@astro.princeton.edu> wrote:
> Hi all, > > When initial condition is uniform, it has zero dynamic range. > Although it has no dynamic range, sometimes I need to plot it with log > scale colorbar to make a movie with the same colorbar for later times. But, > yt forced switch to linear colorbar. How can I make yt not to do that. > > Thanks, > > Chang-Goo >
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
_______________________________________________ yt-users mailing list yt-users@lists.spacepope.org http://lists.spacepope.org/listinfo.cgi/yt-users-spacepope.org
participants (2)
-
Chang-Goo Kim -
Nathan Goldbaum