[ mailman-Bugs-1077587 ] Memory Leak in Bounce Runner
SourceForge.net
noreply at sourceforge.net
Thu Feb 24 16:08:36 CET 2005
Bugs item #1077587, was opened at 2004-12-02 09:02
Message generated for change (Comment added) made by prubin
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=100103&aid=1077587&group_id=103
Category: bounce detection
Group: 2.1 (stable)
Status: Open
Resolution: None
Priority: 5
Submitted By: Paul Rubin (prubin)
Assigned to: Nobody/Anonymous (nobody)
Summary: Memory Leak in Bounce Runner
Initial Comment:
Something is going bady wrong with the BouceRunner It
is leaking memory. After it runs for a short time it has
consumed hundreds of megabytes of memory. I kill it
with -9 and it restarts and is fine for another couple of
hours. Sometimes it does not restart and I have to stop
and restart the mailman service.
This is running on a Linux box with Redhat 9 and postfix
2.1.1 and mailman 2.1.5 and python 2.2.2
Below you will se a PS from right before I killed the
process and below that one from a few seconds later.
If you will tell me what you need I would really like to
get to the bottom of this, I am killing the process like 10
times per day. If it eats too much memory before I
catch it then the entire system fails.
[root at tbnonline ~]# ps -U mailman -o pid,%cpu,%
mem,stime,time,vsz,args
PID %CPU %MEM STIME TIME VSZ COMMAND
12949 0.0 0.0 08:05 00:00:00
7068 /usr/bin/python /var/mailman/bin/mailmanctl -s -q
start
12950 0.1 0.3 08:05 00:00:02
11176 /usr/bin/python /var/mailman/bin/qrunner --
runner=ArchRunner:0:1 -s
12951 18.9 70.8 08:05 00:08:40
931312 /usr/bin/python /var/mailman/bin/qrunner --
runner=BounceRunner:0:1 -s
12952 0.0 0.0 08:05 00:00:00
7040 /usr/bin/python /var/mailman/bin/qrunner --
runner=CommandRunner:0:1 -s
12953 0.0 0.1 08:05 00:00:00
9256 /usr/bin/python /var/mailman/bin/qrunner --
runner=IncomingRunner:0:1 -s
12954 0.0 0.1 08:05 00:00:00
7080 /usr/bin/python /var/mailman/bin/qrunner --
runner=NewsRunner:0:1 -s
12955 2.5 0.6 08:05 00:01:11
14172 /usr/bin/python /var/mailman/bin/qrunner --
runner=OutgoingRunner:0:1 -s
12956 0.8 0.2 08:05 00:00:24
10628 /usr/bin/python /var/mailman/bin/qrunner --
runner=VirginRunner:0:1 -s
12957 0.1 0.2 08:05 00:00:04
13272 /usr/bin/python /var/mailman/bin/qrunner --
runner=RetryRunner:0:1 -s
[root at tbnonline ~]# ps -U mailman -o pid,%cpu,%
mem,stime,time,vsz,args
PID %CPU %MEM STIME TIME VSZ COMMAND
12949 0.0 0.1 08:05 00:00:00
7072 /usr/bin/python /var/mailman/bin/mailmanctl -s -q
start
12950 0.0 0.3 08:05 00:00:02
11176 /usr/bin/python /var/mailman/bin/qrunner --
runner=ArchRunner:0:1 -s
12952 0.0 0.0 08:05 00:00:00
7040 /usr/bin/python /var/mailman/bin/qrunner --
runner=CommandRunner:0:1 -s
12953 0.0 0.2 08:05 00:00:00
9256 /usr/bin/python /var/mailman/bin/qrunner --
runner=IncomingRunner:0:1 -s
12954 0.0 0.1 08:05 00:00:00
7080 /usr/bin/python /var/mailman/bin/qrunner --
runner=NewsRunner:0:1 -s
12955 3.0 0.9 08:05 00:01:43
13584 /usr/bin/python /var/mailman/bin/qrunner --
runner=OutgoingRunner:0:1 -s
12956 1.2 0.6 08:05 00:00:41
10848 /usr/bin/python /var/mailman/bin/qrunner --
runner=VirginRunner:0:1 -s
12957 0.1 0.6 08:05 00:00:06
13284 /usr/bin/python /var/mailman/bin/qrunner --
runner=RetryRunner:0:1 -s
14900 29.8 1.1 08:51 00:02:47
13764 /usr/bin/python /var/mailman/bin/qrunner --
runner=BounceRunner:0:1 -s
----------------------------------------------------------------------
>Comment By: Paul Rubin (prubin)
Date: 2005-02-24 10:08
Message:
Logged In: YES
user_id=91557
I will try the suggested settings...
The bounce process currently builds up about 150MB per
minute when started and takes about 2 minutes after being
stoped for each minute run before it exits. This occures even
when postfix is complete stopped. If the file gets over
300Meg than the exit time goes to 3 times, at 400Meg it will
crash first with out of memory.
Is is possible that there is some hangup that is causing
bounce notices not to get pulled from postfix and the same
ones just keep getting pulled over and over?
----------------------------------------------------------------------
Comment By: Barry A. Warsaw (bwarsaw)
Date: 2005-02-24 07:42
Message:
Logged In: YES
user_id=12800
I have some ideas about fixing bounce runner. If I have
time for 2.1.6 I'll try to attack it.
----------------------------------------------------------------------
Comment By: Tokio Kikuchi (tkikuchi)
Date: 2005-02-23 20:46
Message:
Logged In: YES
user_id=67709
Your site has really big amount of bounces get. I'd suggest
try one or two of these:
1. Set bounce_processing to "No" in admin->bounce page.
2. Set REGISTER_BOUNCES_EVERY = minutes(1) in mm_cfg.py
and process bounces before they accumulate to Giga-Byte.
3. Rewrite your MTA's alias file as
your-list-bounce: yourmail at your.dom.ain
and process the counce manually.
4. Rewrite your MTA's alias file as
your-list-bounce: /dev/null
and forget about the bounces totally.
----------------------------------------------------------------------
Comment By: Paul Rubin (prubin)
Date: 2005-02-23 20:22
Message:
Logged In: YES
user_id=91557
One additional piece, the bounce processor sits at a small
amount of memory until the file with matching pid hits 1.5GB
or so and then starts climbing fast.
If I kill the bounce processor, the file is abandoned., If I stop
the mailman service, the bounce processor keeps running
and eating memory. If allowed to run unchecked, it will just
eat all the memory in the system.
I cannot kill the bounce process without another starting,
even after stopping the mailman service.
If I freshly re-boot the server and let mailman run for a few
minutes, the the file grows, when I stop the service the file
shrinks back to 0 bytes, but does not get deleted.
I hope this helps.
----------------------------------------------------------------------
Comment By: Paul Rubin (prubin)
Date: 2005-02-23 19:35
Message:
Logged In: YES
user_id=91557
Today we ran out of disk space, I have had to kill the bounce
processor about 8 or nine times today...
I found my diskspace problem:
-rw-rw-rw- 1 mailman mailman 1.4G Feb 23 08:48
bounce-events-07208.pck
-rw-rw-rw- 1 mailman mailman 931M Feb 23 09:50
bounce-events-08307.pck
-rw-rw-rw- 1 mailman mailman 1.1G Feb 23 10:10
bounce-events-09037.pck
-rw-rw-rw- 1 mailman mailman 1.4G Feb 23 10:29
bounce-events-10251.pck
-rw-rw-rw- 1 mailman mailman 1.6G Feb 23 13:02
bounce-events-14874.pck
-rw-rw-rw- 1 mailman mailman 1.4G Feb 23 14:17
bounce-events-17525.pck
-rw-rw-rw- 1 mailman mailman 1.6G Feb 23 14:40
bounce-events-18973.pck
-rw-rw-rw- 1 mailman mailman 1.6G Feb 23 15:02
bounce-events-19879.pck
-rw-rw-rw- 1 mailman mailman 1.5G Feb 23 15:23
bounce-events-20584.pck
And about 100 more file from other days.
I have saved these file, and deleted the rest, does this or can
these files tell you anything about what is going wrong?
----------------------------------------------------------------------
Comment By: Tokio Kikuchi (tkikuchi)
Date: 2004-12-16 20:29
Message:
Logged In: YES
user_id=67709
I suggest stop automatic processing of bounces by setting
bounce_processing variable to 'No' at the admin/bounce page.
Looks like your server is very busy and unsubscribing
process due to the bounce score may interfering.
You may also have to unsubscribe the problematic members
manually.
----------------------------------------------------------------------
Comment By: Paul Rubin (prubin)
Date: 2004-12-15 12:29
Message:
Logged In: YES
user_id=91557
I do not have a specific number of bounces per day. We
send around 500,000 message per day with peak days around
1,000,000, we know that we have some bad addresses, but
at any given time there should not be more than 5,000
bounce notices per day (full mailboxes are common)
As far as I can tell only certain bounce notices cause the
leak. We can go hours or days with memory being almost
flat, then suddenly 200M vanishes in 2 or 3 minutes.
Is there any way I could 'hack' the code to somehow grab
the information about what bounce notice is causing the
problem. Or to capture all bounce notices in some outof the
way space that I could tar up an send to you for testing.
If nothing else I could edit the aliases to copy all of the
messages to a file and zip it down for you after a few days.
Does any of this make any sense?
----------------------------------------------------------------------
Comment By: Tokio Kikuchi (tkikuchi)
Date: 2004-12-14 19:19
Message:
Logged In: YES
user_id=67709
My FreeBSD4.7/Solaris8 installations have no such problems.
How many bounces you get on this system?
----------------------------------------------------------------------
You can respond by visiting:
https://sourceforge.net/tracker/?func=detail&atid=100103&aid=1077587&group_id=103
More information about the Mailman-coders
mailing list